Easy Crystalac Tumbler Tutorial using Brite Tone

No video

Easy Crystalac Tumbler Tutorial using Brite Tone

Рет қаралды 2,867

2 жыл бұрын

#epoxyfreetumblertutorial #beginnertumblertutorial #crystalactumblertutorial
In this video, I create my very first epoxy free tumbler. I definitely learned a bunch and I cannot wait to create more with my Crystalac Brite Tone. Comment down below if you have any questions!
✨✨✨✨✨ Come Join our new Facebook Community: ✨✨✨✨✨
/ 3181915875400273
✨✨✨✨ Let’s Get Social!!✨✨✨✨
Connect with me on TikTok. vm.tiktok.com
Connect with me on IG. / shoptinytumblersllc and / quatechiacreates
✨✨✨✨ Place an order with me here: etsy.me/3A3TRYM ✨✨✨✨
✨✨✨✨ Items mentioned ✨✨✨✨
MakerFlo Tumblers: makerflocrafts.com?sca_ref=1749570.m7Mnw4wRTT
My very first turner: amzn.to/3LiDtsV
Wet & Wild Brush: amzn.to/38dzal9
The Crystalac Store: thecrystalacstore.com
Glitter Chimp: www.glitterchimp.com/
Design:
designbundles.net/plusstore/1...
✨✨✨✨
Music Credits:
Love Nwantiti- Ckay by Will Gittens
Angels- Lakey Inspired
*Disclaimer: Some links are affiliate. By clicking and purchasing, I may receive a monetary reward. It does not alter the price or change your buyer experience.

Пікірлер: 18

@quatechiacreates Жыл бұрын

Shop for your epoxy free products using my link!! bit.ly/3GAsFYb 😘✌🏾

@1991manthei 2 жыл бұрын

When using chunky, Smoosh it helps the glitter lay flat. You can smoosh after 1 hr of applying glitter with glitter glue! I love using it but takes a little to get the hang of using it

@quatechiacreates 2 жыл бұрын

Thank you! That was likely the problem. Two layers of unsmooshed chunky 🤦🏾‍♀️😂

@Jamonica 2 жыл бұрын

I love it

@quatechiacreates 2 жыл бұрын

Thank you 😊

@BBWReloaded30 2 жыл бұрын

I use Crystalac also. I sand after 6 coats. Sometimes you will hit your glitter if you sand on the first coat.

@quatechiacreates 2 жыл бұрын

Yea I’m working on a few others and it is looking like 6 might be the magic number for the first sand job

@phoenixprints455 Жыл бұрын

What can you use instead of crystalac glitter glue? I'm from Australia so it's expensive to get the glitter glue

@quatechiacreates Жыл бұрын

You can use mod podge instead

@milady2218 2 жыл бұрын

Hello, new to tumbler with glitter. How to I apply vinyl

@quatechiacreates 2 жыл бұрын

Hi! Once your surface is smooth, you can sand your tumbler lightly and apply your adhesive vinyl using transfer tape. Would you like a more detailed video on applying vinyl?

@crystalmichellem 2 жыл бұрын

Hi, Do you also wear a mask with brute tone/Crystalac? How much do you use on a plastic tumbler? If & when you do plastic can we have a tutorial?

@quatechiacreates 2 жыл бұрын

Hi, no you don’t need a mask with BT. It’s water based and hardens as the water evaporates. I’m currently trying to figure it out on my acrylic tumblers and I’ll share once I get it down

@crystalmichellem 2 жыл бұрын

@@quatechiacreates ty!

@skeeskeedo Жыл бұрын

40 layers yikes! Did it use up most of your brite tone you purchased?

@quatechiacreates Жыл бұрын

It did! 😂 The good thing is… I’ve changed much of my process so I can get one done in about half the amount of coats as on my first one. So I’m headed in the right direction. I’ll post an updated video soon 🤞🏾

@moniquemoore5360 2 жыл бұрын

40 coats at 4 hours per coat? 🤔

@quatechiacreates 2 жыл бұрын

Yes, and about 3 coats a day. It took me waaayy longer than expected. But it was likely the fact that I had two coats of that chunky-ish. Just don’t do that 🤣