Thanks for this!! I’ll admit… I was one of the gorilla tape guys…. LOL! I’ll own that. Now I’ll do this DIY project.
@wendellfishing2 жыл бұрын
Lol… let me know how it turns out!
@ffemt703 Жыл бұрын
A suggestion when working with Kydex; Since the heat gun for prolonged periods can damage your hull, you can pre-heat it in the oven until its rubbery. We make holsters this way and for the soft plastic of some kayaks it is easier to pre-heat then just use heat gun to keep it warm.
@AHLive215 Жыл бұрын
usec ommon sence
@mofishing2241 Жыл бұрын
Got one better... use a tray and heat the kydex up on the tray with the gun. Also, they make adhesives that bind plastics.
@TheSumo294 Жыл бұрын
Use a toaster oven right in the garage. 20 bucks
@joseluiscuevas4699 Жыл бұрын
Great video! My kayak got broken and I used epoxy E 600. It's highly recommended for high density polyethylene , dry fast, water resistant and flexible
@joseluiscuevas4699 Жыл бұрын
Epoxy E 6000
@wendellfishing Жыл бұрын
Solid tip Jose! Thanks boss
@paulferrari3921 Жыл бұрын
I think I would use epoxy too.
@wannabeangler Жыл бұрын
Great idea and simple! I'm the G. Tape guy AFTER a hole comes, but usually just melt plastics cut outs back over hole.
@wendellfishing Жыл бұрын
Right on Wannabeangler!
@ralphpearson5420 Жыл бұрын
You know I have molded things like that in the oven. Crank id up to about 225 deg. Keep an eye on it then carefully grab it with proper protection and fold it right over. I enjoy your content, thank you I for what you do. REP
@wendellfishing Жыл бұрын
Right on Ralph.. sounds like a solid option if you don't have a heat gun and you gotta get it done! I actually just finished a 2.0 version with a different adhesion. If you are interested: kzfaq.info/get/bejne/mtaKpMaQnrS1pas.html
@ryanamey5024 Жыл бұрын
For that rear keel guard you could leave most of the tape covering on while you put it in place. Once the guard is in place you can pull at the tab allowing the tape to adhere to the kayak
@wendellfishing Жыл бұрын
Right on Ryan
@robertdeyoung7311 ай бұрын
Just finished mine this weekend. I am super pleased with the way it turned out. Thanks for the idea and the video.
@wendellfishing11 ай бұрын
Right on brother!
@mach1792 ай бұрын
I have 2,400-hours on my Delta 12-10 kayak and I'm very careful, i.e., I use wheels vs. dragging my kayak thru the parking lot. Both the bow and stern developed cracks/leaks recently. I fixed them with JB Weld. If I knew his was going to happen I would have bought a toothpaste sized tubes of JB Weld at Walmart and filled the low spots on the bow and stern when it was brand new. Once I saw the gray JB Weld color I would have known I was thru the kayak material. I'd rather spend $20 for JB Weld vs. hours of labor.
@RidesTheRain2 жыл бұрын
Made mine today and got it installed. The Kydex was easy to work with and the final result looks good. Haven't had it on the water yet but it seems really solid. Great solution!
@wendellfishing2 жыл бұрын
Right on RidesTheTrain! Thanks for reaching out. I've had mine on for a year with no problems so it should treat you well!
@SilverShadow2LWB Жыл бұрын
Yeah, this type of stick on solution works great especially for those kayaks that stay out of the water. You will soon see that Gorilla adhesive and silicone sealant do not stick to polyethylene. Should be good for a kayak that stays in the garage. thanks
@RidesTheRain Жыл бұрын
@@SilverShadow2LWB Well now that's interesting since I'm retired and go kayak fishing 2 days a week nearly every week and my guard is still firmly in place. It's been in the water for hours on end, banged over rocks and gravel bars and boat ramps and I have yet to touch it.
@Ianbond21 Жыл бұрын
Just got my heat gun today and plan on slapping some kydex on my yak asap. One thing i will probably do slightly differently is heat my kydex in the oven first and use the heat gun to keep it warm as i adjust stuff.
@wendellfishing Жыл бұрын
Right on... let me know how it turns out. I'm curious if it cools on you too fast or not.
@BeckieZullo Жыл бұрын
Great step-by-step instructions!
@wendellfishing Жыл бұрын
Happy to Help Rebecca!
@theguywitheyebrows2 жыл бұрын
The only thing im thinkin id change would be a jb weld for plastics instead of mounting tape, some scuffing on the kydex and the hull if it needs it, shlather the epoxy all over both surfaces, and "clamp" with a sandbag for even distribution of clampyness (i know thats not a real word but its the best one for the need). If you loose the sandbag to the epoxy there wont be too many hurt feelings (use a dogfood bag and some dirt wgaf), the edges can be beveled before-hand to discourage 'catching' on stuff at the bottom, and if ever the kydex is compromised there will be a layer of epoxy between the elements and the hull. After that distant yet fated day, you can always re-shlather it up and schlap down another layer of kydex. yes, shlather because epoxy is hateful yet glorious and schlap because its a fun sound to make. thanks for this tip, i'm miles away from my first kayak but i'm well prepared to outfit the tar out of it before i get it wet, and now with a keel guard, thanks to you!! sub earned!
@wendellfishing2 жыл бұрын
You are already doing mods on a kayak you are miles away from. I have a feeling you are closer than you think :) Thanks boss for the sub.
@urbancarvers89742 жыл бұрын
We have the same exact heat gun, I had make sure mine was in the shop cause they have the same wear marks. Thought you stole it 🤣 nice work! I’ll be doing this when my sheets come in.
@wendellfishing2 жыл бұрын
Right on. Let me know how it turns out!
@johnneblett7185 Жыл бұрын
Re: using a marine cement vs. adhesive. When you researched this, what were the specific advantages and disadvantages for each that drove your choice, if you don’t mind? GREAT VIDEO!!!!!
@wendellfishing Жыл бұрын
Hey John, To be honest, it's been a while since I researched that video so unfortunately I can't answer too well. I know that Polyethylene is a unique plastics that only bonds to certain agents. I'm sure it would work with others, I just landed on this one as it was fairly easy and clean and from what I could find.. held up well. I have had it for two seasons now with no issues. I have even helped put this on some kayaks of some of the subscribers. Hope that helps brother.
@mike-indiana6643 Жыл бұрын
Now that's a informative an usefull video. Thank you sir !
@wendellfishing Жыл бұрын
Thanks Mike.. I did a 2.0 a couple of weeks ago you may like. kzfaq.info/get/bejne/mtaKpMaQnrS1pas.html
@dustinfrost521423 күн бұрын
Im doing this
@john_kelley2 жыл бұрын
Great video and build! That's a lot cheaper than other options!
@wendellfishing2 жыл бұрын
Thanks boss!
@teedub1272 жыл бұрын
My yak has a replaceable keel piece but the front looks like yours, thanks for the great and informative video.
@wendellfishing2 жыл бұрын
No problem Teedub127! Happy to help
@gittekrog-meyerholmen2223 Жыл бұрын
A good fishing Kayak with all the basic features one needs for a good fishing experience. If you're going to be on the water for a long period of time, get a stadium seat that fits, and your all set.
@wendellfishing Жыл бұрын
100%
@tizmo575 ай бұрын
Hell yeah! Great video I'm doing mine this weekend! Thank you!!
@wendellfishing5 ай бұрын
Have fun!
@tizmo575 ай бұрын
Yo Thanks, I decided to wait and Goop it...I banged one out of tin then epoxied it but is is starting to rust and wear so gonna do this once I get the stuff;)@@wendellfishing
@sentientslug3259 Жыл бұрын
You did this pretty damn well. im going to try the same thing with PVC seeings that I have a ton lying around. But this just looks so neat.
@wendellfishing Жыл бұрын
Thanks boss! I just did a 2.0 as well with a different design and adhesion. Easier and cheaper! studio.kzfaq.infodpZqc_9NQuw/edit
@bentontool Жыл бұрын
Can you perhaps post a follow-up video to remark on how well this has held-up?
@wendellfishing Жыл бұрын
I don't think I will get around to a video...but I haven't thought about it since I put it on.. no issues whatsoever. I also have a 2.0 version that is cheaper and easier. Also no issues this season. kzfaq.info/get/bejne/mtaKpMaQnrS1pas.html
@ChesapeakeChris2 жыл бұрын
Great video, I heard of using Kydex for keel guard. I bought some and the double back sticky tape and marine grade silicone but waiting for a little nicer weather to try it.
@wendellfishing2 жыл бұрын
Right on Chris! Let me know how it turns out and I hear ya on the weather. My latest videos have been shot in my garage!
@ChesapeakeChris2 жыл бұрын
@@wendellfishing I'll let you know 👍🏻
@wendellfishing2 жыл бұрын
@@ChesapeakeChris Right on!
@seancurley7954 Жыл бұрын
I like it! Personally I'd have used marine goop.
@wendellfishing Жыл бұрын
Maybe I will try it out next time
@joembikesdirectvideos7997Ай бұрын
Great Job! How long did this stay stuck on? Would be nice to see a follow up :)
@wendellfishingАй бұрын
2 years and it's still on!
@Musicalpa2 жыл бұрын
After a couple decades of wanting to have a fishing kayak, the day has finally come and I want to protect "my precious" as much as possible, lol. However, how much is really needed and where, and how much would make me look like a lunatic, lol? I could cover the entire bottom of the boat with kydex for the ultimate protection, lol. Do you think you can make a video sharing your thoughts on how much keel/hull protection is really needed, and if there are other areas of the hull which could use a small panel of kydex protection too?
@wendellfishing2 жыл бұрын
Yeshua, It's all a matter of preference and how you utilize your yak. A full Kydex cover seems a bit overkill and unlikely to stick to your polyethylene yak. Your main points of "river rash" will be your bottom bow.
@davidmanevich10402 жыл бұрын
I saw a guy on another video cut the kydex with shears for vinyl siding nice clean cuts
@wendellfishing2 жыл бұрын
Shears would work, if you have a scroll saw.. that would be ideal.. A quick sand will remove the roughness.
@davidmanevich10402 жыл бұрын
@@wendellfishing oh yeah I was a carpenter all my life have all kinds of tools.
@WendellWoodworks2 жыл бұрын
Protect that investment! 🙂 Great video.
@wendellfishing2 жыл бұрын
Ill just buy another one if it gets a hole :)
@MrBigDaddyUSA Жыл бұрын
Great video. I have an Old Town PDL106. Hardest part was / is getting template just right. Wanted to go a bit higher on the nose for those skinny water-to-bank landings. Middle of the template kept kinking in the middle segment.
@wendellfishing Жыл бұрын
Right on Mr Big! Yeah... getting ready to do another on my Bonafide P127
@MrBigDaddyUSA Жыл бұрын
@@wendellfishing During part of the chat with Chad, there was a spot where he talked about providing newbie advice- the type the perhaps you and he just assume everyone knows. I’m new to kayak fishing and about ready to enter Chad’s month-long Feb C-P-R tourney here in Alabama. You’ve given a lot of how-to’s but how about finding the right water, take in/out, going alone (which has its own challenges), and some of the other ‘how-to kayak bass fish’? Really would like to hear your insights, etc.
@wendellfishing Жыл бұрын
@@MrBigDaddyUSA Right on... My channel ebbs and flows. during the spring through fall... I do a lot more of the on the water stuff... where as right now.. with hard water.. transition into more how to's etc. All that to say....They are coming!
@doctorgeneral4239 Жыл бұрын
All boat companies use 3M 5200 or 4000. You don't need the tape at all. Put the 3M sealant on them, press them on the boat, and they won't come off unless you cut them off with a razor blade cutter. It's good for salt or fresh water.
@wendellfishing Жыл бұрын
Thanks boss!
@j.wilson6412 жыл бұрын
I think just adhering it with the silicone should be good. Great stuff here!
@wendellfishing2 жыл бұрын
Right on.. please let me know how it works...I'm interested
@rhodesianhunter93602 жыл бұрын
Lol, I did the same thing on my last kayak. Great minds, lol. I used half 3m double sided tape and half what ever double sided tape won on project farm. The Amazon/project farm tape was crap. Lasted half the season, and was a pain to get off.
@wendellfishing2 жыл бұрын
Right on RH! I put it on a year ago and still no issue.
@johngoss3997 Жыл бұрын
Yo Chad Hoover just gave you a shoutout and linked this vid to his most recent video. That’s dope.
@wendellfishing Жыл бұрын
Whoa really…. That’s rad. I’ll check it out
@billszymanski4844 Жыл бұрын
great vid. when you want a symetrical template, fold the paper.
@wendellfishing Жыл бұрын
Right on Bill! Great add
@maurosantillan6111 Жыл бұрын
EXCELENTE VIDEO GRACIAS POR COMPARTIR TUS PROYECTOS NOS AYUDA MUCHO PARA CUIDAR NUESTROS KAYAK
@wendellfishing Жыл бұрын
Happy to help Mauro!
@Drunkenjimjim2 жыл бұрын
Great video man look forward to more kayak mods
@wendellfishing2 жыл бұрын
Right on James... I've got some in the works!
@kevinlaughlin8895 ай бұрын
Great video! Question - Why use Gorilla tape instead of a silicon adhesive gel or something like that?
@wendellfishing5 ай бұрын
I Got You... kzfaq.info/get/bejne/mtaKpMaQnrS1pas.html
@gerardhebert92072 жыл бұрын
i have the same yak, in grey goose, did same keel guards... works fantastic!!!
@wendellfishing2 жыл бұрын
Love it. Curious.... how many seasons have you had it on?
@gerardhebert92072 жыл бұрын
@@wendellfishing this is first season ive had yak... bought in nov, put keel guards on in jan... used twice since installing... definitely need them for the concrete ramps and oystwr reefs here in Louisiana
@305miamifishing92 жыл бұрын
How long does this last
@gerardhebert92072 жыл бұрын
@@305miamifishing9 i not long ago, installed them... got my new kayak in september... installed keel guards in late december
@wendellfishing2 жыл бұрын
@@305miamifishing9 I've used mine for a half season with no issue to date. Keep in mind, I didn't just throw this video together. I did a ton of research to an put together the best DIY plan I could come up with. Hope it helps.
@haciendadad11 ай бұрын
Another great video! Thanks
@wendellfishing11 ай бұрын
Right on brother!
@alejandrocarvin67787 ай бұрын
You say true
@lanceeverhard69512 жыл бұрын
Awesome Video
@wendellfishing2 жыл бұрын
Thanks Lance!
@bigstarnesoutdoors Жыл бұрын
Thank you.
@wendellfishing Жыл бұрын
Right on Big Starnes
@Scubastevetampabay Жыл бұрын
This is awesome but i think I'm gonna use silicone instead on the tape. If it's done right and you push all the air out the suction alone would keep all the water out. I thought about using 5200 but in sure one day I'll need to replace the Kydex.
@wendellfishing Жыл бұрын
Right on Scuba... I'm literally filming a 2.0 version of this today. Going to use a different adhesion as well even though the tape has held up like a boss
@erickfuentes5975 Жыл бұрын
Thanks Great video 👍
@wendellfishing Жыл бұрын
Right on brother... here's a 2.0 version with a different adhesion method: kzfaq.info/get/bejne/mtaKpMaQnrS1pas.html
@inlikemin Жыл бұрын
Looks like a great method! How has it been holding up? Still on there?
@wendellfishing Жыл бұрын
Has been holding up for 2 years.. here's my 2.0 method which I personally like better: kzfaq.info/get/bejne/mtaKpMaQnrS1pas.html
@ethang33126 ай бұрын
Can you use Sikaflex 291 Marine adhesive and sealant as a replacement to the gorilla mounting tape? Thank you in advance
@wendellfishing6 ай бұрын
Haven't used that.. however,, I have used Marine Grade Goop. kzfaq.info/get/bejne/mtaKpMaQnrS1pas.html
@JoeNajorFishing2 жыл бұрын
Great idea. Looks pretty solid. Gonna give it a shot on my yak. New sub. 👍
@wendellfishing2 жыл бұрын
Right on! Let me know how it treats ya!
@tonyparker75213 күн бұрын
Does it matter what thickness kydex to use ?? What do you recommend ?
@wendellfishing2 күн бұрын
Thicker would work too....especially if you have less curves to your keel
@estevansanchez96396 ай бұрын
Does the tape hold pretty good? I want to make sure it won’t come off when I’m moving the boat on the ground.
@wendellfishing6 ай бұрын
NO issue in two years.. I also have another adhesion method that has worked as well. kzfaq.info/get/bejne/mtaKpMaQnrS1pas.html
@vernonsimmons45782 жыл бұрын
Love it, thanks!
@wendellfishing2 жыл бұрын
Right on Vernon…. Going two seasons strong on mine so far with no issues
@acemcflanders49042 жыл бұрын
Nice work.
@wendellfishing2 жыл бұрын
Thanks Ace! If you end up doing it.. let me know how it goes!
@JoeyIngles Жыл бұрын
Thank you for the time stamps and the materials list. But man, you cut the kydex out of the middle?
@wendellfishing Жыл бұрын
I have no other real use for it
@JoeyIngles Жыл бұрын
@@wendellfishing Well if it works, it works. Excellent job.
@wendellfishing Жыл бұрын
@@JoeyIngles Been holding up!
@Musicalpa2 жыл бұрын
Ok, I ordered .093 kydex, and thought of another question for you. Is there a reason why you chose to use double face tape to adhere it to the kayak rather than using marine goop?
@wendellfishing2 жыл бұрын
Great question Yeshua, I usually do a fair amount of research on my projects before I put them out to the world. My research lead me to find success with the double sided tape over marine goop.
@meagainandagain57562 жыл бұрын
My cousin installs granite counters, and installs under mount sinks using silicone. I’m wondering if that would work in place of the two sided tape.
@wendellfishing2 жыл бұрын
I really don't know but if you try it, please let me know how it turns out !
@davidmanevich10402 жыл бұрын
Thanks for this video I'm going to put one on my kayak today. Only question is how well did the gorilla tape mounting tape work out for holding it. Other videos I've seen have used epoxy???
@wendellfishing2 жыл бұрын
I've had mine on for 1.5 years with no issue and I fish 2 -3 times a week.
@fisher-samoyed9857 Жыл бұрын
Do you need a dremel to cut the kydex? Or a scissor would be good?
@wendellfishing Жыл бұрын
Scissors won't work.. but Tin Snips will. Here's a more recent 2.0 video with a different adhesion method you may like better: kzfaq.info/get/bejne/mtaKpMaQnrS1pas.html
@randolphbehm8772 жыл бұрын
Nice job? I wonder if 5200 would work in leu of the double sided tape?
@wendellfishing2 жыл бұрын
I did a bunch of research as well before I shot this video... if you use the marine sealant, let me know how it goes. Also, the tape has help up to date with heavy use.
@rodneyhendrickson9811 Жыл бұрын
How long did that tape hold that on They have a 2 part epoxy glue Do you think that will work Are should I buy the tape I'm fixing to do mine this summer I Bought the same plastic your using But i bought that glue I just wander if I should buy the Tape That looks good the way you did it ''Thanks man''
@wendellfishing Жыл бұрын
Hey Rodney, I don't know about the 2 part epoxy.... never have used it.. All I know is that I'm going on two years with no issue. Here's a short of my keel guard... I put a beating on it. kzfaq.infoZlHvUChrdAg
@bojanpeterkovic38712 жыл бұрын
Hey guys, i loved this keel guard video until i realized that nothing sticks to my big fish 120. I would like to know how you got the gorilla tape and the silicone to stay on your kayak? Honest question
@wendellfishing2 жыл бұрын
Bojan, so you tried the gorilla tape and silicone and it didn't work? I know that cleaning it thoroughly with alcohol helps the adhesion as well. Hope that helps
@TheDreamer1949 Жыл бұрын
First I am posting this a year after you posted this video - how has the kydex held up? also Just wondering - First, I have been researching as well as YES, I really like your video and agree. One question is maybe an upgrade. I am concerned that the two sides tape and silicon will eventually give even when the Kydex is holding up well. What are your thoughts on using a JB Weld epoxy glue instead of the two sided tape? I would probably still use the silicone with the JB Weld. YOUR THOUGHTS
@wendellfishing Жыл бұрын
Thanks for reaching out Lawrence, The keel guard is still holding up like a boss after heavy use. I really can't answer your question as I have never used JBWeld.. but I know a lot of guys use it for HDPE so it sounds like you should be good to go. Let me know how it goes. I'm curious.
@DilltheLegend Жыл бұрын
The previous owner of my kayak had installed a keel guard from kydex just like this video but the keel guard is old and work out, how would I go about removing the old one to install a new one?
@wendellfishing Жыл бұрын
Toluene is a more powerful solvent that will remove fully set GOOP. However, an easier method may be to just layer it on top of the established keel guard and mold it around it.
@DilltheLegend Жыл бұрын
@@wendellfishingthanks for the reply all i had to do was rip it off kinda needed to use a knife to cut around the tape and silicone
@patrickgniech7873 Жыл бұрын
I would use marine epoxy down the center and along the outside edge so when you push down on it, a bead of epoxy pushes out the edge to seal it and keep it ridgid. JMO..
@wendellfishing Жыл бұрын
Solid tip Patrick.... I actually have a 2.0 version coming out in the next couple of weeks using a different adhesion method
@popaki94842 жыл бұрын
Nice idea! Do I need a specific heat gun? I wonder if I can use marine goop or hot glue instead of gorilla tape. What are your thoughts? Thanks for sharing!
@wendellfishing2 жыл бұрын
Hello Kali, You don't need any specific heat gun. Anyone should work. When it comes to the other options of Hot glue or Marine Goop, I really don't know. I do know that I did quite a bit of research and arrived at the tape being the best option. Mine is still holding strong after 1 -1/2 years with no issue.
@jimmatt8005 Жыл бұрын
Great job. I like the way it turned out. I have the Brooklyn RA 220. Looks exactly like yours does. Here we are a year later. How did this hold up for you? I'm debating between the Kydex and using Electrical grade PVC. Any updated info as to the durability of the Kydex Thanks
@wendellfishing Жыл бұрын
Hey Jim, a full year of HEAVY use with no issues. Holds up like a boss. I believe that Kydex has a rockwell hardness of 90 with PVC coming in much softer.
@jimmatt8005 Жыл бұрын
@@wendellfishing I'm impressed. Thanks for the reply. I will be using the Kydex based on your recommendation. The great thing with KZfaqrs is you guys have hands-on experience that can't be found at the retail level. You are a valuable resource. Again, great job.
@TheMyrmidonSoldier2 жыл бұрын
Long shot you'll respond but anyone who may have an opinion, what about using PVC cement to adhere the guards to the keel?
@wendellfishing2 жыл бұрын
Hey Boss, I respond to everyone. I usually do quite a bit of research on my videos and If PVC cement didn't make honorable mention then I probably didn't see it as a viable option long term.
@skotfree99582 жыл бұрын
I noticed the mounting tape says not for use on polyethylene or polypropylene plastics. Has that caused you any issues?
@wendellfishing2 жыл бұрын
I've had it on my yak for about a year now with no issues
@DigitaLIon7812 жыл бұрын
Original reply: I have a Titan 12, and the bow is a virgin. I'm the second owner, and the original owner custom made a guard out of schedule 40 PVC pipe. He used gray double sided tape, and lasted a good long while. Not sealed, water and rocks were getting inside, in between the tape and kayak. I just tried the 60lbs rated gorilla tape, and tested in on a clean smooth portion of the bow. Was able to peel it off easily. I'm not confident enough that it'll hold the new kydex keel guard. Seems like I'll be locating some 3M VHB double sided tape to do the job, since prying off the old guard with that tape was really secure. Edit: "hold on." ha! Applied heat to a test piece of gorilla tape on the kayak, and on a piece of kydex. Holding strength won't be achieved until 72 hours. Will check back in later. 20220521: welp, peeled off the temp/test piece. I don't feel comfortable with it prying off so easy, even if it holds the kydex well with the sealant on the edges. I mostly fish the CA Delta and the levee ramps are steep. Even though I try to slow down when coming in, I'm afraid the back and forth will lodge the piece loose. Going with something a bit stronger, aka 3M VHB tape.
@skotfree99582 жыл бұрын
@@DigitaLIon781 I did almost exactly what Wendell fishing did (w/ the gorilla tape that is recommended) and I haven't had a chance to get on the water, but I think the adhesive on that tape may be stronger than you think once it sets.
@PeterRanieriII2 жыл бұрын
great video! couldn't agree more that the keel guard is one of the most important mods. Hey do you know if the berley pro keel guards use this same kydex material? I bought one and after a season it scuffed through, so wondering if this stuff may be stronger as I'm thinking to layer it on top of the old keel guard.
@wendellfishing2 жыл бұрын
Thanks Peter! Great question... the BerleyPro Keel Guards are thermoformed ABS plastic. Kydex is thermoformed as well but the key differences are that Kydex is Fire Retardant, texture is different, and ABS is not as strong as Kydex. Kydex is a bit easier to form than ABS if you are heating it up. Hope that helps!
@PeterRanieriII2 жыл бұрын
@@wendellfishing @Wendell Fishing that helps a lot, thanks for the quick response! It makes sense too because I tried heating up the berley pro one before with a heat gun and it didn't really bend like yours in the video, in fact it started bubbling. Thanks again, going to try your method out with kydex
@wendellfishing2 жыл бұрын
Right on! Let me know how it turns out and reach out with any questions along the way.
@tomgilberg80383 ай бұрын
Why not use silicone to attach the entire gaurd?
@wendellfishing3 ай бұрын
Never tried it!
@agfa663 Жыл бұрын
Instead of silicone I would use automotive black urethane. They use that to glue windshieldS and plastic trims on car.
@wendellfishing Жыл бұрын
interesting... have you used this on polyethalene?
@tmiller249 Жыл бұрын
Is there a reason everyone uses black? A nearby plastic wholesale that sells to the public has both white and black. I'm thinking of using white as the bottom of my kayak is all white.
@wendellfishing Жыл бұрын
Same stuff, you will be good to go either way!
@iamobserving99172 жыл бұрын
What about using contact cement instead of tape? that way it would pretty much eliminate water from getting under it. Very cool idea by the way.
@wendellfishing2 жыл бұрын
I did quite of bit of research before I did this... I'm sure there are multiple other ways.. but I'm at around 2 years of heavy use with no issues to date
@jimnewton21839 ай бұрын
Contact cement wouldn't give you the give (flexibility) you need in this application.
@Musicalpa2 жыл бұрын
How are those guards holding up?
@wendellfishing2 жыл бұрын
Working great with no issue after 1 year so far.
@jasonstone8222 Жыл бұрын
How'd that hold up?
@wendellfishing Жыл бұрын
Beat the crap out of it... held up like a boss: kzfaq.infoZlHvUChrdAg
@dustinfrost521423 күн бұрын
How thick is that kydex
@wendellfishing23 күн бұрын
Whatever the amazon link says
@Musicalpa2 жыл бұрын
What width did you cut the kydex for your bow keel?
@wendellfishing2 жыл бұрын
Yeshua, I just measured it and it's 4 1/2 inches
@Musicalpa2 жыл бұрын
@@wendellfishing Thank you. I watched your video closely, and I took a guess based on the piece you made and the span of your thumb and first finger when you were holding it, and I was only off by a half inch. I made mine 5" wide for the very front bow, and two more pieces to follow it which gradually widen to the width of the keel as it flattens and an 1.5" overlap on each side for the piece just in front of the console opening. I plan on putting two more piece on the sides of the console opening, then I'm going to start on a few pieces on the aft keel, around the wheel in the keel, and in front of the keel as skid plate protection. I will say, the .093 kydex actually measured in at .103, and it was a bit more difficult than it looked in your video, but still manageable with perseverance and patience. So far so good. I had intentions on trying to made a diy video like yours, but I'm too focussed on what I'm doing to make the time to plant cameras. As you know, it's a lot of work planting the cameras, but even more to put it all together to make sense. I appreciate all efforts and help. Shalom aleichem
@darrenm95972 жыл бұрын
Hows it holding up? Have you used in salt water?
@wendellfishing2 жыл бұрын
Great question and great name as well :) It's holding up well and I'm more rough on it now that it's there but in complete transparency, I've had it out only a few times since. I'm planning on doing a follow up video but need more time beating it up for a legit review and being up in NE Ohio the opportunities are far and in between. I've not had it in saltwater. All freshwater around here. Thanks for the question and let me know how it turns out for you if you pull the trigger.
@darrenm95972 жыл бұрын
Gonna attempt install this weekend I'll keep you posted
@wendellfishing2 жыл бұрын
@@darrenm9597 Sounds good
@305miamifishing92 жыл бұрын
@@darrenm9597 any updates sir?
@idostuff220 Жыл бұрын
Does it hold up in salt water?
@wendellfishing Жыл бұрын
Never tested so I can answer with any authority as mine has been heavy used in freshwater for 2 years with no issue so far
@Ruthless9o72 жыл бұрын
how has it held up?
@wendellfishing2 жыл бұрын
Coming up on 11/2 years with no issue.. still on there.. and still protects.. and I beat it to death.
@Ruthless9o72 жыл бұрын
@@wendellfishing im sold! thanks!
@theperfectpaintertoolreview8 ай бұрын
Is this still holding up? I like the idea but the back of the gorilla mounting tape it says it doesn't work with polyethylene, which is what kayaks are made of.
@wendellfishing8 ай бұрын
Never had an issue in 2 years
@theperfectpaintertoolreview8 ай бұрын
@@wendellfishing thanks, I bought everything to make my own. This seems like the most durable for the money
@dormie92 жыл бұрын
I went and bought a heat gun and dremel, way past $25 budget and I don’t even have kydex because I’m out of money now.
@wendellfishing2 жыл бұрын
Since this was a DIY video, I assumed the viewer would have the tools and the $25 was a materials cost estimate.
@dormie92 жыл бұрын
@@wendellfishing haha nice of you to reply. I’m just joking :)
@JasonStewartsStreak2 жыл бұрын
Why not use 100% silicone to stick the kydex on?
@wendellfishing2 жыл бұрын
Hey Jason, I have found that the silicone doesn't hold up that well over time. Have you had luck with it.
@JasonStewartsStreak2 жыл бұрын
@@wendellfishing I went with loctite marine adhesive, it came in a caulk tube and the keel guards are falling off after the first trip
@pegasus67242 жыл бұрын
I use duct tape on my running shoes My treads on my shoes should have been worn out months ago But a little duct tape over the the parts that take the most abrasion is cheap and effective And my treads are near perfect after 6 months
@johndelonge828 Жыл бұрын
Would aluminium work better
@wendellfishing Жыл бұрын
Couldn't say to be honest.. All I can say is that I have two years on it with no issue
@GT_Racer3472 жыл бұрын
Has it held up?
@wendellfishing2 жыл бұрын
It has... two seasons pretty hard with no issues
@GT_Racer3472 жыл бұрын
@@wendellfishing Outstanding! I really like that idea and will probably try it out soon.
@wendellfishing2 жыл бұрын
@@GT_Racer347 Right on! Let me know if you have any questions!
@timothyortiz2222 Жыл бұрын
Why not just use silicone to hold everything down and waterproof.
@wendellfishing Жыл бұрын
Hey Tim, When I was making this video, I did a ton of research and landed on this method. So far so good. Got a couple of years of heavy use with no issues to date. And I have beaten the tar out of it. Here's my latest Short on it: kzfaq.infoZlHvUChrdAg
@greenspiraldragon Жыл бұрын
Rubber electrical tape. You may have to use a stronger glue.
@wendellfishing Жыл бұрын
So far no problems!
@Manuel_Z_Kayaks2 жыл бұрын
The problem with this whole video is You're showing an UNTESTED project/product(s) It's hard to find any product that sticks well to KAYAK PLASTIC. Granted the kydex looks like it Molded nicely My question is.. Now that we're almost a year later... DID IT HOLD UP? You smoothed out the surface instead of roughing it up to make the tape hold. Silicone doesn't last on kayaks and looks terrible after it ages a bit. An update would be nice!
@wendellfishing2 жыл бұрын
Over a year with no issues with heavy use.
@MrBammbalamm Жыл бұрын
skip the tape and just use silicone
@wendellfishing Жыл бұрын
Silicone would get destroyed IMO. All of which I applied already pealed off.
@just1smothie2 жыл бұрын
Under $25? Kydex, 2 sheets for $19, Gorilla tape $23, Silicone $26.42. Not considering the time you used to make it, how did you add those 3 to under $25???. Might as well buy one already made for it and not waste time messing for something that won't work.
@wendellfishing2 жыл бұрын
Yeah, this video was made a while back when the prices were much lower
@pegasus67242 жыл бұрын
Hooo ya
@chads3308 Жыл бұрын
I don't wanna brag, but mine comes with keel guards so ..
@wendellfishing Жыл бұрын
Not braggin.. that's great
@Lemonarmpits Жыл бұрын
Mike Tyson of kayaks
@wendellfishing Жыл бұрын
🥱
@frankfelipe23642 жыл бұрын
You could of epoxy it , it will last longer
@wendellfishing2 жыл бұрын
Have you epoxied yours?
@pegasus67242 жыл бұрын
Duct tape £5.95 water proof and perfect
@austinbrooks965 Жыл бұрын
Great video, thanks man!
@wendellfishing Жыл бұрын
Right on Austin. Appreciate it
@fishntools Жыл бұрын
Hummm, surprised no one has made molds to press these out of aluminum or stainless????
@wendellfishing Жыл бұрын
Yeah.. I think it would be hard because every hull type is different.
@andriyshapovalov8886 Жыл бұрын
Not $250?
@wendellfishing Жыл бұрын
?
@andriyshapovalov8886 Жыл бұрын
@@wendellfishing seems a bit more than 25
@wendellfishing Жыл бұрын
@@andriyshapovalov8886 I agree with you.. when I shot this video last year the prices were significantly lower
@ninjason572 жыл бұрын
$25!!! As long as you have a heat gun and dremel...
@wendellfishing2 жыл бұрын
Or a scroll saw, you could also heat up the kydex and cut it when it’s soft. I’ve heard of guys heating it up in the oven.
@ShabitzMP Жыл бұрын
heat guns are like 13 bucks at harbor freight. You can use many methods to cut it.
@andriyshapovalov8886 Жыл бұрын
Who cares if water gets under. As long as rocks stay out.
@wendellfishing Жыл бұрын
Nice.. do you like it?
@andriyshapovalov8886 Жыл бұрын
@@wendellfishing of course, looks good 👍
@andriyshapovalov8886 Жыл бұрын
@@wendellfishing I mean as long as no holes in the kill, silicone seems not necessary.
@wendellfishing Жыл бұрын
@@andriyshapovalov8886 Go for it and let me know how it holds up.. I'm curious
@BackyardRambo Жыл бұрын
Don’t drag your boat or land on oysters… problem solved… $0.00