Easy Fix 70" Sony TV with black screen Model (KD 70X690E)

Рет қаралды 6,531

Жыл бұрын

This Sony TV only had a green standby light but would not turn on. The issue was bad protection diodes inside the tv, you can fix this yourself by using a screwdriver and braking off the protection diodes.
Hope this helps.
Newson's Electronics reducing e-waste one repair at a time!
If you would like to support my channel please checkout my other listings.
Facebook Page - NewsonsElectronics
WebSite -- www.newsonselectronics.ca
Patreon -- www.patreon.com/user?u=47548239

Пікірлер: 13

@hawaii6282 Жыл бұрын

Thanks for sharing another repair video. Did you put in a replacement diode or just remove the bad one ??

@JimTogher 10 ай бұрын

Is there an easy way to bypass the check?

@SirSmashalot350 3 ай бұрын

The "owt" is strong with this one.

@miguelrodriguez2328 Жыл бұрын

Do you know how to fix it when it turns on, leds turn on but no picture? Thanks in advanced

@PraiseYaHuWaH 10 ай бұрын

Had 3 diodes discolored, carefully popped all the front ones off. red 6 still…. popped off the back diodes. Still 6 red blinking lights. Wondering if I need to replace all the LED strips.

@PraiseYaHuWaH 10 ай бұрын

Can all the diodes be snapped off or just the outside diode?

@user-hn5xq8uv9j 4 ай бұрын

Thanks man❤

@Tzreoaor Жыл бұрын

Can you remove both of the little diodes for each strip? I just did mine and I only did the bottom one like yours showed bud it’s still not turning on. Let me know and I’ll break the other 6 little ones off

@PraiseYaHuWaH 10 ай бұрын

Did you remove all of them and did it work for you?

@miguelrodriguez2328 Жыл бұрын

The let's turn on exactly like in your video with no picture though.

@JamesDean-vl3uf Жыл бұрын

My flash is six red lights black screen do you think it's the LED or the board? I saw a video where the guy just cuts a wire and grounds it You think that's a viable option I have the same model you have

@NewsonsElectronics Жыл бұрын

you could try it, you have nothing to lose.

@JimTogher 10 ай бұрын

I tried that first. Ground the BL error wire. It did NOT work. The blinking red light stayed green, so the bypass worked. But the picture would not come on.