Enjoy this content?? Please like and subscribe! It helps me out BIG TIME 👍👍💪💪🍻🍻🍻

Thx for the help man little videos like these make the differences 🔥🔥🔥🔥

Appreciate that bro, I cut the wire and had spark again, literally saved me so much time and money, I'm going to run it to a toggle switch now and make everything nice and neat, thank you 👍🏼

2 days of chasing wires and diagnosing this and that. I knew it couldn't be this simple. Pulled the wire out of the CDI pigtail, plugged it back in, and fired it up. You're the fucking man.

Bought new Battery and CDI put them on still didn't spark waiting for new coil to be delivered and saw this video. Cut the wire and my keeway fact 50 is sparking again. Thanks so much, you're a legend.

This video has been copyright claimed by Valvoline and Seafoam. Thanks I will have to try this. I spent half the day trouble troubleshooting my scooter with test lights rewiring and soldering. I spent more time playing with the kill switch than I did installing the engine . Subscribed

THIS SAVED ME! thank you for this video!!!!

Thank you, very much, you’re the man! I tried everything! It worked. Thank you thank you thank you!

“And of course, Seafoam”. Love it!!

Little brother...I just rewired for an 11 pole stator, even made a video about it. 1st 2 rides I was getting intermittent spark, she ran but would shutdown after about 4-5 miles or so. Pulling the spark plug and testing showed nothing. I was thinking it was the carb. mixture until I test the spark plug see I'm no spark. Of course check wiring, CDI, coil, tested everything...Came across your video and this other brother's who both confirmed the same thing. Didn't cut mine, but unseated it from the terminal, and now SPARK! Thank you nephew, I will be making a video in a couple of days and your name WILL be mentioned. Thank again! Oh for anyone else reading this...YES THIS WORKS. SUB #457

For those of you with spark issues, remember to start simple and go from there,,,,CDI,plug, ignition coil,,,these should be the first 3 to look at

thanks man, worked for me, I've put hours into it, lol

I replaced piston and rings, she started then cut out because carbs was still filling up then I let her idle then she cut out and I checked fire coil in order but no power to fire coil

Thank you finally solved my problem

Thankyou 👍 most CDI have one 4 wire plug but mine has 2 plugs with 5 wires

Will a key still turn the bike off? If you snip this wire?

Only this super simple things that works well in my case.... Thank you so much..

Having an issue, mine will just make a click sound at solenoid when trying to start. Also the positive cable gets very warm even after a few tries, tried a new fuse, swapped battery and new solenoid nothing, but it did start with the kick start twice but now it won't kick start anymore either. Ideas? GY6 150cc only 500 miles

omg i'd think kill switch would stop starter motor . makes more sense now !!! you can't kick start if kill switch engaged too . this gotta be my issue - new stator,coil, wire ,plug , cdi . thnX in advancE brO !!!

What was the symptoms you had??? Would it spin over but no spark....i ask cause my kill switch on thr handlebars,when pushed down, the engine will not spin over....like its working? So not sure if this kill switch wire could be my problem...ive already replaced plug, ign coil and stator....all for over $100 & NO luck ..only part left is cdi...and its $140....so not wanting to buy more unnecessary parts.....help!

I’m going to have to try this. The green wire on my 4pin connector is on the bottom left, not the bottom right (both should be ground though). And my black wire on the 2 pin connector is on the top, not the bottom… gonna switch those around and see what happens

Same dude just replaced stator cdi ignition coil all spark related wires just to find out it is probably this

Will it still cut out on ignition

Its worked thanks for this. But now how to turned off the scooter or how to fix this issue because now it’s starting but can not turned of my scooter

You touched on something no one else did

You are the man

Had the same problem years ago. I shorted the kill switch to fix it.

hello. so on my cdi in the top right is a yellow and black wire that connects to the spark coil, should i still snip it? if not which wire should i snip

If we cut the wire to the kill switch, how are we suppose to shut it off?? I want to do this but curious if that first

So if i do this will my scooter start? Because now its not starting and I replaced everything

Hey there ....my scooter is not giving any spark at all....so just to try something u saying If I cut the red wire on the corner of the cdi then I should have spark

it is possible that i can change my cdi ... with or without battery .. ?

Is truth I try it and it work 👍

Thank you so much

God bless brother thank you so much. This worked for me after cleaning the carb. THEN replacing the spark plug. THEN buying a new ignition coil. After 10 plus hours of intense trouble shooting. This ending up bring what worked for me. LOL. I have a wolf jet classic. Must have been the that the kick stand broke and the center kick stand must have been mis signaling.

Thx it work, but how did you solve the kill switch issue??

thank you

How do you turn it off now ? Use the key ?

My scooter had the same issue. I cut the kill wire on the CDI and finally, a spark. It ran for a few minutes and then refused to start again. Check the spark and no spark again. Going to give the batt. a full charge and try again. No idea why the spark would just quit like that now.

It didnt work for me should i change the cdi or what man

Thanks bro shit really works

Dude in the beginning of your vid you touch the black wire with white stripe , that's twisted with together with a green wire that's a ground , I you say "" I don't know what I was doing there"". Well you've got the the coil wire grounded out by having those touching ,,, hope this helps in the future,,Miki

I just did this and it worked thx man I was going crazy trying to figure it out. The only issue I have now with doing this is when I turn the key off it stayed running. Any suggestions?

My scooter wont start, when I press brake engine cuts off

I really don't understand how this would work I was under the impression that if the motor would turn over than it shouldn't be in the kill switch I didn't think it was that complex

I replaced everything, still no spark. I will try this method as well

Hello does it matter what cdi you put in ? i have a generic trigger and can i put a gy6 cdi inside ?

I did everything you and the rest of the community did too troubleshoot and replace and finally did this and IT WORKED! But my only problem now is that the key won't shut off the bike. Very weird. Any chance you know anything about it?

No Spock, beam down some electrons Scotty!

Bad kill switch then, shorting Incompleting circuit. You did aloooot of extra work

and now how you turn off the scooter ?

Kick stand is down there’s prob is a kill switch on that!

🤔 I changed everything, still no spark, I'll have to test this out

Did it actually work

So you’re telling me… I just replaced a starter, a stator, a spark plug, AND AN IGNITION COIL, all for a fix that involved snipping one fucking wire?!

Nice video but still didn't solve my no spark issue

Wires twisted together on kill switch engaged kill. Wire u snipped grounds out ignition

I will try this. Does anyone know if it actually works?

What next I've done these things .my question is going t be

That may have worked for you but cdi,stator,wires first

2 of the four wires going to the ignition switch need to be connected to turn it on they are red and black the other two that you had connected was the kill switch that's why it was always engaged. You don't have to cut that wire going to your cdi. Just put a switch between the green wire and the black/white

ill try this ill let you know. everything is new now lol but my wires have a bad ground so it starts like 1% out of 50 times lol Yes i also purchase starting fluid and did not work, but i will try your method. To me it looks like the stupid cdi freezes the cable wires so by cutting that cable you bypass the frozen motor function to start! great idea ill try that today!

These scooters are the biggest pile of junk. Owning one is the most frustrating waste of time. If it isn’t one thing, it’s another. I pushed mine more then I ive rode it. No spark this morning. Ran fine when parked, I’m gonna drop it off at the dump.

Never mind it didn't work

Say bro, you got that right! What’s your cash app? I want to donate to your channel, that was a good heads up, my guy, thank you! 🛵🛵🏆🔥🔥🔥💰💰💰

Same dude just replaced stator cdi ignition coil all spark related wires just to find out it is probably this