How'd you do?

You don't. Lightly use an Exact-o knife to make an H shape over the connector (you'll feel it) and peel back. I removed the tabs and last white sheet but his method is significantly easier.

Srsly.

Well said Red Es. I've done many of these jobs. The overwhelming majority of the time this is caused by LED failure which requires replacement of the LED strips. This is a very finicky and tedious repair. Things can go wrong at almost any stage. The bigger the screen the more perilous the repair. It is very easy to break the screen. If the screen is broken you will have to get a new TV because the screens, even if available, are not economical to replace.

Did you solve the problem?

you can use a cheap LED tester or a power suply or you can snap a few 9V batteries together. These LEDs use about 6V each.

So you plugged the tv back in??

through elimination. each row has 2 strips. when you apply power on each strip individually all led turn on. when you apply at one end of the row only one strip turn on.

How did you apply power to each individual strip?

@@arikamuellner2788 you can easily unplug the wire that powers the bottom strip or 2nd from the top (depending on where the lights aren't coming on), remove the connecting wires at the end of the next strip and substitute with the power.

Yes, they were flickering all the time. If yours works for 7 mins all the time when you turn it on then it might be the power supply.

@@curiousitech9807 yeah my thoughts also, thanks for the reply man

@@TheHomeloanking Did you get a new power supply and did it fix the issue? We seem to be experiencing the same issue as you. TIA

@@sarahandrew7144 haven't done anything with it, can't help you atm.

I have same problem like you, then I opened it check led lights work fine at beginning, then few minutes later turn on and off. I saw the button half side is off all the time,the up half side turn to flash. I try to push the connector (where between led light )hard to make sure there’s no disconnect caused the light off. After I push one of them,the all led lights turn back to normal. Then I try turn tv on few times and stay on. The problem is gone. My mind is there is a disconnect problem between the led light connector. Hope this work to you too!

you have a row of bad leds.. replace them..

@@trainsplanesandotherthings5187 you're 2 months late I already did that.

KZfaq certification 😉

Yes, thin wire from LAN or telephone cable.

@@curiousitech9807 thank you sir..

@@curiousitech9807 cant I just use the lead directly? 🤔

@GTA 6 mine after 2 years

Mine started flickering after 1.5 years. And also, all the HDMI ports fell off to the back of the TV after 2 years (do they glue them with just saliva or what?). I really didn't abused the TV, but LG is really an awful brand, considering that when I bought my house every major electronic (incl kitchen appliances) that came with the place was brand new LG. I have had issues with EVERY single one of the products, starting as early as 4 months. I've saved so many others from buying LG after they've seen fist hand all the issues I've had with all of their products. Never again.

my lg tv doesn't flicker when i watch netflix in it but as soon as i change it to youtube or hdmi it starts flickering again idk what is the problem i called lg service they visited my house and they told us there is default in display but now i don't think there is prob wd display