EASY Lighting Hacks w/ Garmin PowerSwitch & Transit Touchscreen!

No video

EASY Lighting Hacks w/ Garmin PowerSwitch & Transit Touchscreen!

Рет қаралды 10,726

EXPLORIST life Mobile Marine & Off-Grid Electrical

Күн бұрын

Пікірлер: 59

@EXPLORISTlife 8 ай бұрын

➤ *Blog Post w/ Diagrams for all three scenarios:* explorist.life/lighting-hacks-w-garmin-powerswitch/ ➤ *Garmin PowerSwitch (Amazon):* amzn.to/4al5FsN ➤ *Garmin PowerSwitch (Van Parts Warehouse):* vanpartswarehouse.com/products/garmin-powerswitch?_pos=4&_sid=c48b8ebe7&_ss=r&ref=mjg5g5esjri

@brianchetelat6601 8 ай бұрын

This tutorial can give some people a headache and rightfully so. But having been a gadget guy from birth, this stuff, mixed with a little perseverance can provide satisfaction rewards when you see it work. The one thing you want to be sure to do is good documentation, so that next guy doesn't need any headache powder : ) Fun geeky stuff Nate, thanks.

@bensonnguyen5872 3 ай бұрын

I learned about this product from other reviews, however: I am not mechanically inclined when it comes to wiring lights and was very confused as to how this product worked. Thank you for the clear and simple explanation. I will be getting this product and installing on my rig very soon.

@3G4Runner_N_Gunner 3 ай бұрын

Strobe feature is perfect as chase lights on the back of the vehicle for anyone behind you in dusty conditions.

@Bobbydell 3 ай бұрын

I plan on using my factory upditter switches as arm switches. They're only supplied when the ignition is on. I guess a cool thing with that is you don't need your phone or android auto for it. For the flashing lights. You also have your hazard lights go to a trigger. I thought there was a dimmer feature for this as well.

@jonsmail8082 8 ай бұрын

This litle thing would work great for controlling inside lights inside the van, ceiling, floor and other power needs inside the van off the house battery's

@EXPLORISTlife 8 ай бұрын

Very much so! This mounted down in the electrical enclosure connected via bluetooth to a tablet mounted somewhere would make for a super clean setup.

@JaYoeNation 8 ай бұрын

Thanks Nate. Really helpful video. I have a power switch and am working out how to integrate it and this helps a lot

@EXPLORISTlife 8 ай бұрын

Great to hear! Cheers!

@joshuas10 8 ай бұрын

You have created the video I have been trying to find and confirm my thoughts. I was thinking the same things as you noted in this video with respect to controlling lights through the inputs. I hope Garmin can come up with a solution with a firmware update.

@EXPLORISTlife 8 ай бұрын

Awesome! Glad it helped. Yeah; that would be super nice if scenario three was handled w/ software/firmware. Maybe if someone over there sees this video. I talked with somebody from Garmin at Overland Expo about this; but I'm sure they had more pressing things going on to handle there. 🤷‍♂️😂🙏 In the meantime; I've put the diagram for that 'advanced wiring' over on the blog: explorist.life/lighting-hacks-w-garmin-powerswitch/

@samhartfieldlewis5247 8 ай бұрын

Hello sorry just paused it when on about turning a group on and off the toggle (option) does that in one button feature. I have on the truck in doing light bar and ditch lighting together. Really like the garmin power switch amazing compared to other systems so far after 2 years had zero problems. Thank you take care go steady ✊

@unimog404 8 ай бұрын

Nice usable unit! In my Unimog which is 24volt I just wired all the lights directly on the switch. Keep it simple and use good switches 😁

@KentFleshman 8 ай бұрын

You could wire two amber lights on the rear of your vehicle/roof rack and set them to strobe if you are broken down on the side of the road or are having to change a flat or something.

@chachi5975 8 ай бұрын

I was thinking dance party but your idea is more practical 😄

@KentFleshman 8 ай бұрын

@@chachi5975😂🕺🪩🎶

@GriffinConway 8 ай бұрын

4:54 If you select toggle it will turn off / turn on from the same custom button instead of having to make a second custom button to "turn off all"

@Bobbydell 3 ай бұрын

Thanks for clarifying that. I was like that's so dumb you have to make another custom button to turn off the lights.

@DSBaughm 4 ай бұрын

Going to use this workaround for the light up grill letters I bought for my bronco. I want to be able to have them turn on when the engine starts but want to be able to turn them off and go stealth. Thank you 🙏

@EKKOdocker 7 ай бұрын

Great video on the test stand and cool seeing the lights in action on the prior video! I ordered the Garmin for our Transit, with your video and writeup being a tremendous guide. It'd be helpful to have a follow-up video on your detailed light wire runs, gauge of wires used, where everything's placed underhood and your final programming logic on the Garmin.

@vanlovefest 8 ай бұрын

Totally ace video, THANK YOU!!

@keyogen 8 ай бұрын

Why do feel this video is in response to my question in the live stream.

@jerrydebaca8697 8 ай бұрын

Great video. Now I know about this Garmin Powerswitch in case I'd like it for my truck. Another hack, for those of us without secondary or dual batteries is to wire in a relay that is controlled by Acc on to supply power to the system so that the Garmin is not a load on the single starter battery while the vehicle is not running. It could drain the battery that way. Hopefully you wouldn't lose all your custom programming if you do this though. Great vid though. Does Garmin have a panel that we can add to this for those of us who do not have touch screens/phones?

@darrylm3627 8 ай бұрын

😄👍Good Stuff, Great Tips

@AdventurePod 8 ай бұрын

Awesome video … thanks for taking the time to build the test bench. Quick question: My light bars support different modes (White, Amber, White & Amber). The switch that came with the light bar has on/off and toggle between the modes. Do you think the toggle feature could manage to change the mode of my light bar?

@JeanYvesHudon 8 ай бұрын

It seems that the switchpro is superior with a keypad and Bluetooth functionality as well. Albeit no vehicle integration

@EXPLORISTlife 8 ай бұрын

I wouldn't really say it's 'superior'; just a different option for if you don't want it to show up on your vehicle touchscreen.

@HenryOCarmichaelSmith 8 ай бұрын

Surely the toggle option would toggle them on and off instead of just "on" only

@JJ26PNW 8 ай бұрын

Thanks for the video, Nate. I purchased the Garmin for my Sprinter but have yet to install it. Do you happen to know if the controls will work on the Sprinter screen as well?

@rgrkim 7 ай бұрын

Thanks for the video. Is there way to use upfitter switches to turn on instead of phone? raptor upfitter switch.

@razorwired130 8 ай бұрын

Great video! Would you support using one or more Garmin PowerSwitches to control all of your lights, interior and exterior, as well as water pump and any other devices you might have and not use conventional switches at all?

@stevennijweide5326 8 ай бұрын

That’s exactly what I am planning for my van. 3 powerswitches and no conventional switches.

@kenvasilik3730 8 ай бұрын

Assuming I program these switches to control exterior (front, rear, left side & right side) roof rack lights ... My Transit already allows me to LOCK, UNLOCK & START my van from outside the vehicle. Using my smartphone, will this Garmin device allow me to also control my lights from outside the vehicle ? Perhaps from a distance, to help locate where I parked in a crowded public lot, or to Scare-Off possible suspects when I'm approaching my vehicle in the dark ? In other words ... what distance or range have You found this device to be serviceable ?

@stevennijweide5326 8 ай бұрын

Yes it should@@kenvasilik3730 , but only on bluetooth distance and if you have permanent power to the unit.Personally i am planning to have a permanent inside of the un it that i can remotely control so i can have access from anywhere

@sdfaulk01 8 ай бұрын

Nate, have you tried sPod light power controls? I think they are so much more elegant.

@EXPLORISTlife 8 ай бұрын

Those are also cool, but don't integrate with the Transit touchscreen in the dash (to my knowledge).

@sdfaulk01 8 ай бұрын

@@EXPLORISTlife you are right, I don't think they do. They have a upfit for the Sprinter but I don't see anything for the Transit so you would have to come up with a mounting location for the touchscreen which probably isn't convenient.

@stevennijweide5326 8 ай бұрын

Thanks Nate, I was researching these and wasn’t able to find much info on them. I think I might use three units to do all my indoor and outdoor lights with. Makes sense to use this system for everything. One thing: Are you sure that no fuses are needed? Is this a fail safe system? Not a software system? So what kind of wire would I use. Say I connect a 5A consumer to one of the ports, I would normally select a wire that limits the voltage drop for 5A and fuse it at 5A. How would I select cable for the 30A automatic fuse s of the garmin without having to cable everything for 30A users? So what cable is still safe for 30A short circuit?

@EXPLORISTlife 8 ай бұрын

I think using these for interior lighting like you are talking about is a fantastic idea. You can absolutely add fuses if you like; but each terminal is literally incapable of producing more than 30A. From the manual: "The Garmin PowerSwitch device limits the amount of electrical current for each output terminal. If a single output exceeds 30 A, the device turns off that output automatically. If the device detects a total system load of more than 100 A, the device turns off all outputs automatically." High quality marine wire w/ 105 degree insulation like Ancor Wire (what we used in our build) is rated for 30A, 38A, and 51A for 14ga, 12ga, and 10ga respectively when installed inside of an engine space. For our install, we used a combination of all three: 10ga for the switch to lights home-run and then a combo of 12ga and 14ga to go from light to light; so we are covered on all fronts. The manual gives pretty good recommendations of wire sizes as well: • Use 10 AWG (6 mm2) wires for accessories that use 20 to 30 A. • Use 12 AWG (4 mm2) wires for accessories that use 10 to 20 A. • Use 14 AWG (2.5 mm2) wires for accessories that use less than 10 A.

@stevennijweide5326 8 ай бұрын

Thanks. Just what I was looking for! I like the rugged design of these systems. They seem much more practical,for 4x4 vans than some of the other bluetooth switch thingies. I also,like that I can for instance switch my scene lights with the reverse lights, whilee still having them powered with from the house battery.

@cynic256 7 ай бұрын

What bumper do you have on your transit

@EXPLORISTlife 7 ай бұрын

kzfaq.info/get/bejne/ar9lbKljvcW-eJc.html

@teppohovattala5171 8 ай бұрын

Also when its snowing you dont want aux lights To be on, and i would like To use this function also To reverse light. So not everuybody behind me would not go blind.

@EXPLORISTlife 8 ай бұрын

Yep! In addition to our amber fog lights (wired to factory fog light function) we would use in snow; we have additional amber light bars down low we can kick on as desired from this unit.

@richardburguillos3118 4 ай бұрын

HELP!! I have a PowerSwitch unit that I will soon be installing. Can I program the unit so that... If I press switch 01, it will first turn off 02, then turn on 01. Then, if I press switch 02, it will first turn off 01, then turn on 02. I have Baja Designs LP6 lights that have High and Low beams and both cannot be on at the same time or it will damage the light.

@EXPLORISTlife 4 ай бұрын

Not sure. You'll have to play around with it.

@richardburguillos3118 4 ай бұрын

@@EXPLORISTlife Baja Design lights are popular. They have that High Beam and Low Beam lighting that the harness expects us to independently control. I could hook the Low to say 01 and the High to 02, but the danger there is of if I forget to turn one off before turning on the other. Seems this should be a routine I could program into PowerSwitch.

@EXPLORISTlife 4 ай бұрын

@@richardburguillos3118 Try it out and let us know how/if you get it to work.

@richardburguillos3118 3 ай бұрын

@@EXPLORISTlife I can setup 01 & 02 as momentary switches so if I press either one, it will just flash the lights. I can then create a two custom buttons. The first will turn off 02 and then on 01. The second will turn off 01 and then on 02. This will work for now as I trying to get this down to a single momentary button that toggles and acts like a SP3T switch.

@sxswutah-ww6dr 8 ай бұрын

Not at $500

@EXPLORISTlife 8 ай бұрын

What's not at $500?

@ieism1 8 ай бұрын

It's nice, but $500 is an insane amount of money, and a phone interface is not practical.

@EXPLORISTlife 8 ай бұрын

$500 is on-par with other similar products on the market and hardly 'insane' for consumer electronics. There are multiple interfaces that can be used. The phone is one; a tablet is another; compatible vehicle touchscreen (like we have in our Ford Transit), or other Garmin touchscreens mounted in the vehicle.