Easy MQTT Server Setup

Рет қаралды 206,782

6 жыл бұрын

This simple tutorial shows how to setup an MQTT broker on a Raspberry Pi. MQTT is a little bit explained and some examples are shown. It is also shown how to add password protection and get es fixed IP from a router.
Links, code etc. can be found on the project page:
bitluni.net/simple-mqtt-broker...
Twitter: @bitluni
If you like the video consider supporting my work on Patreon and get some extras:
/ bitluni

Пікірлер: 100

@thenetimp 6 жыл бұрын

So FYI, you don't need a mouse and keyboard and monitor to setup the raspberry pi. 1) create your SD card Raspbian image 2) . create an empty file called ssh in the root of the SD card boot partition. This enables ssh on first boot. 3) Connect via ssh from your computer, saves you a lot of hassle...

@xxaax 6 жыл бұрын

cool thanks! saved me alot of time!

@webblab2415 4 жыл бұрын

@@xxaax don't you forgotten a network connection? I mean wpa_supplicant.conf file with ssid ad pass....to allow raspberry to connect to the LAN..

@richardlighthouse5328 3 жыл бұрын

@@webblab2415 Not needed when you are using ethernet, which you should be using anyway.

@cavhaunch3597 2 жыл бұрын

How do you know the ip address of the pi before connecting it to a monitor?

@thenetimp 2 жыл бұрын

@@cavhaunch3597 I don't. I use other unix tools to scan my network for new devices and their IP addresses, typically the new PI is the new one. Or if it's an older pi I am setting up again, I have the mac address recorded on a piece of tape on it for future reference, I can set it up in my router to have a specific given IP address.

@ytfp 6 жыл бұрын

Yep love the home automation and so happy your back making videos one of the best on youtube.

@mmajstruk398 5 жыл бұрын

Hi! Another great video that saved me lots of time setting up my Raspberry Pi with MQTT broker for my academic project. I got Raspberry Pi with Node-RED and MQTT ready, now it`s time to get ESPs, sensors and relays out from box and start playing with them - that should be the most fun part of project ;) BTW, I liked the password ;)

@TrentSterling 6 жыл бұрын

Was subbed, but today I added the bell. There's a lot of devices around here I need to chuck an ESP into. Looking forward to the washing machine project!

@xxaax 6 жыл бұрын

Hi bitluni, thanks for showing us the setup. How would you proceed, building a new house? I like the mqtt node-red technology and think it would be a cheap solution for a smart-home. Are there any good guides out there yet? How to wire everything up and so on. Thanks again, and keep on basteling ;)

@zvpunry1971 6 жыл бұрын

6:11 The config file contains "include_dir /etc/mosquitto/conf.d" by default. It is a good advise to use this to just create a file like "/etc/mosquitto/conf.d/50-bitluni.conf" and add your config there. When the mosquitto package is upgraded, it won't ask if you want to keep or discard changes on a changed config file. And you have all of your changes in a single file with clear visibility of your own deviations from the default. Many other programs have something like this in their config too.

@BrianThomas Жыл бұрын

3:58 The default IP address can be found also in the raspberry pi after running ifconfig. Generally the default gateway is the router or where the IP is being generated from. Type in the default gateway IP into a browser and you should be prompted to login to your router.

@arunbm123 6 жыл бұрын

You have so many components in shelf...Good Setup !!!!

@KshitijDhar7 6 жыл бұрын

Awesome! Was looking for this. Thanks :D

@MrBobWareham 6 жыл бұрын

I hear the SD card in Pi don't last very long something to do with read-writes so can we use a hard drive to the pi or another small computer please thanks Bob

@colinpamplin9976 6 жыл бұрын

Very interesting I think I will add password to my mosquitto Pi3 setup with 12 mqtt devices. I have found node-red very good and easy when you get the hang of it. The only issue is the dashboards can be slow with several devices, graphs and dials.

@bitluni 6 жыл бұрын

I like node red.. planned to add it with the first use case :-)

@VBsepheroth888 6 жыл бұрын

Does mosquitto not work on the newer versions of raspberry pi? I have a pi 3 model b and I can't get mosquitto to install to it.

@JasonRobards2 3 жыл бұрын

excellent tutorial!

@msmadaram 4 жыл бұрын

have you ever work on android broker such as moquette or something like that ?

@yusofjohan3456 5 жыл бұрын

what if im just using a mobile phone hotspot? should i change also

@hacihocni6156 5 жыл бұрын

Is there a safe way to access local host in internet ? Usibg just esp32

@Noah-vm8id 2 жыл бұрын

Echt mega hilfreich, bin schon am Schauen wo ich meinen Raspi habe, das wird sofort umgesetzt

@zephalon 6 жыл бұрын

Nice video! I want to build something similar but I already have a RF24 hub so my sensors don't need a WiFi connection.

@bitluni 6 жыл бұрын

+Zephalon coming back to rf in a few weeks

@leon-set 5 жыл бұрын

Bruder genau was ich brauche 👌🏼

@BeanedVR Жыл бұрын

Thx for the helpful vid, also great user password ;)

@jonatasdeoiveirasousa595 6 жыл бұрын

If a don't have a Rapsberry Pi, can I use a virtual machine Linux instead of a Raspberry?

@sairfan06 3 жыл бұрын

What user interface you were using for mosquitto like 192.xx.x.x:1992

@MobiMenace 6 жыл бұрын

Thanks for the videos; they are helpful. Would you please go through SSL setup, please?

@bitluni 6 жыл бұрын

Ok, I will. But probably not October since I've a full schedule and have to do a project for Halloween

@gianluca1694 6 жыл бұрын

i have the problem that my PI in the menu not marked as "mos installed".... and nothing connectto anything....

@tinker7722 6 жыл бұрын

MQTT is so great! wow - I like it!

@tinker7722 6 жыл бұрын

Thank's for that info! this way I do not have to plug my raspi to my TV-Screen

@MegaSolidgamer 3 жыл бұрын

How did you connect your phone with the ping pong senario?

@moneydontbuyclass 3 жыл бұрын

will this work with the new raspberry pi zero W?

@1q1q1q1q1q1q1qw 6 жыл бұрын

first of all funny videos your acting is great :D i got PRI 1 (c) i inserted the card with the stretch image on it nothing happend ??? any idea

@___aZa___ 3 жыл бұрын

maybe a little late, but did you flash it or did you just put the image on the card per drag and drop?

@schneider1492 3 жыл бұрын

how about running a mqtt broker on a asus router running Merlin

@phamtoan3820 5 жыл бұрын

you rock man!

@sntshkmr60 11 ай бұрын

I can't open the dashboard from my host machine's chrome. I have installed mosquitto into raspi using ssh.

@xbmcnut 6 жыл бұрын

Thanks for the vid. What MQTT app did you use on your phone?

@bitluni 6 жыл бұрын

MQTT Dash. Works fine but it doesn't support widgets.. if you know any other good ones I'll try

@xbmcnut 6 жыл бұрын

Yes, I use that too but MQTT Dashboard allows single button widgets although it's not as nice to use.

@LatinDanceVideos 5 жыл бұрын

I'm late to the party, there are far too many options now. Blynkt looks nice but I'm not convinced it works well with MQTT.

@AhmetTasdemirDJLuds 4 жыл бұрын

İ was tried it last year but it worked only with local broker. Am i true or false ?

@marcodibona Жыл бұрын

HI! Is MQTT client in PHP possible? which library to use?

@shinevisionsv 6 жыл бұрын

Lmao, the washing machine fix is genius.

@michaelg.werner4331 5 жыл бұрын

why the ip address of the raspi broker isn't determined AT the raspi itself?

@caroman6761 6 жыл бұрын

How do I get my communication to the MQTT Broker secure? is there any way of encryption? I heard, usernames and passwords will be sendt as clear text ...

@bitluni 6 жыл бұрын

didn't do encryption yet.. it's still in your local network. but you probably don't like to use the same password as your gmail one

@AstralJaeger 6 жыл бұрын

Looks verry promising, would be nice if you could explain how we can access these local MQTT servers from everywhere, maybe with somekind of DynDNS

@gordhenschel1419 6 жыл бұрын

dyndns hasn't been free for years, but namecheap offers free dns and its good. Then forward a port in your router. not sure about the MQTT / Node-RED part. Maybe bitlunislab can comment.

@AstralJaeger 6 жыл бұрын

doesnt need to be a DynDNS Service, NoIP or something similar should do, would be just nice to be able to check a MQTT based Temperature probe from everywhere not just my own wifi

@bitluni 6 жыл бұрын

dyndns and opening a port on the router... but that might be risky. If you happen to have a virtual server you could also install a mqtt server on that and let your home mqtt subscribe to that one on the virtual server. it's called mqtt bridge... mosquitto supports it. No open port there

@AstralJaeger 6 жыл бұрын

The problem with the vserver is that it aint cheap to host one, but i might beworth giving it a shot and look it up. By the way its a good video!

@istvantemerdek3445 2 жыл бұрын

Good password for mosquitto :)

@umanggoel2709 5 жыл бұрын

My MQTT server is not running. Its giving me an error that address already in use. Any way to fix it? I am a new to linux

@leonf.7893 4 жыл бұрын

Did you put the correct port in?

@narasis 4 жыл бұрын

whats kind of chip is it that plays ping pong?

@ajaybnl 6 жыл бұрын

I love when you do over acting.... Thanks.

@bitluni 6 жыл бұрын

Thanks mate :-)

@chuxxsss 6 жыл бұрын

You must have been reading my mind. I need to make a new broker for my home. The old one has issues with reverse shell stuff.

@bitluni 6 жыл бұрын

what is reverse shell?

@chuxxsss 6 жыл бұрын

bitluni's lab it's where you have a ssl tunnel in to your system without opening a port,

@roadeycarl 3 жыл бұрын

I don't get it... how to you access the broker?

@user-uv2gu8wm6h 6 жыл бұрын

what is mac address of rasp pi

@facundonieto1598 3 жыл бұрын

qué datazo el del minuto 3:41! buen video

@transient0126 3 жыл бұрын

LOL..rev 1 never used with dust all over it. You and me both mate...you and me both :D

@jettaglnegro 3 жыл бұрын

Is posible.... mqtt +android celphone+modem+esp32? Red local...No Internet .

@andironner6784 4 ай бұрын

Why would you need security, it's all within your network.?

@BrijeshRana 3 жыл бұрын

5:36 I see what you did there 😂😂😂

@gcm4312 4 жыл бұрын

nice password 🍈🍈😂 oh, when you want to mask mac addresses, it is better to mask the last 3 bytes since the first 3 are usually used to identify the manufacturer so easily discoverable if you show the device on the video ;)

@carlosvidal3814 2 жыл бұрын

I just rewatched the video and thought, "wait, is he showing us the password on purpose? That has to be a joke" and I was right 🤣

@gasca_mx 6 жыл бұрын

First comment! Greatings!

@MyTube4Utoo 2 ай бұрын

Cool......

@lightdark00 6 жыл бұрын

You show really simplistic computer/Linux issues, but you didn't say how you get the results and settings on your phone.

@bitluni 6 жыл бұрын

this is the beginning of the series for setting up the server. I'll show how to do the client this week. the app is MQTT Dash.. you add there the broker (ip, port 1883, user and password). On that page you simply add the topics and select the type you like