Easy Pedal Removal Technique to Avoid Confusion

Рет қаралды 43,931

Күн бұрын

Left hand thread, right hand thread, you're loosening when you intended to tighten---it's so frustrating to figure out which is which. In this vid we show the the EASY way to tell which way to turn to get it off, or on.
At BBInfinite we live to stop bottom bracket creaking. A creaking bottom bracket ruins a perfectly nice ride. It's also embarrassing when you are riding with a group and your expensive carbon bicycle is creaking and squeaking like a secondhand Walmart bike. The worst part is that a creaking bottom bracket is telling you that there is extreme inefficiency plaguing your drive train.
Exorcise the creaks with our one-piece design, hub-style bottom brackets. A unitized design prevents the inevitable creaking of multi-piece units. Furthermore, a one-piece design (OPD) maintains perfect bearing alignment for incredible spin and extreme durability.
Become infinitely faster...and quieter...with BBInfinite.
Check us out at www.bbinfinite.com
For fast service and quickest responses contact us via Facebook or Instagram messenger, or email at info@bbinfinite.com.

Пікірлер: 39

@patrickprouty4415 3 ай бұрын

Tighten toward the front of the bike, loosen toward the back of the bike for both pedals.

@corbett08 3 ай бұрын

Wrong way

@danreyes736 Ай бұрын

Yeah. The opposite of what he just said.

@BigBeezyBtown Жыл бұрын

With the bike on both wheels, I always just pull back with the wrench upright towards the rear wheel to remove. His works good too, but if you don’t have a stand.

@meibing4912 Жыл бұрын

Good tip - I'll probably have to look it up next time anyway, but cannot fault the logic.

@OpenShot23 Жыл бұрын

that's the first time I've heard someone say "discombobulated" formally😂

@BBInfinite Жыл бұрын

Slim Shady said it first: kzfaq.info/get/bejne/grh5lNCErb2ppZs.html

@lbyvik Жыл бұрын

Thats even too much. It’s simple. Regardless of which side, w the bike on its wheels, turn the wrench to the back of the bike to “back off” the pedals

@manwithnoname6580 11 ай бұрын

Tried this. Doesn’t work. Any tips that DO work please?

@CycoPatPonfe 7 ай бұрын

Right turn right to Tight Left turn Left to Lock

@danreyes736 Ай бұрын

Wrong

@dravindarkcloudable 5 ай бұрын

The trick i use is. When both wheels are on and on the ground. Put wench in the back. If the wrench is behind the peddle and must turn forward that is off. It the wrench is forward and must turn back thats ON

@danreyes736 Ай бұрын

He makes it so simple. When I try, 30 mins later I’m covered in grease, dirt, and urine.

@BBInfinite Ай бұрын

Hopefully it's your own urine.

@danreyes736 Ай бұрын

@@BBInfinite Hopefully.

@andrewtweddle1750 Жыл бұрын

Right is right, left is wrong

@manwithnoname6580 11 ай бұрын

That makes zero sense. Any tips on how to undo pedals from inside the pedal arm with an Allen key please?

@ROADRASHALLDAY 5 ай бұрын

I just do the down tube method.

@boredmartymcfly6099 3 ай бұрын

Both pedals tighten towards the front of the bike.

@PinkyFingerPedalStrike 6 ай бұрын

Right side, right hand thread. Left side, left hand thread.

@Drzhounder Жыл бұрын

Or just, pedal backwards to put hem on, pedal forwards to take them off

@ChefIan73 3 ай бұрын

On towards the front, off towards the back. Simple as that 🤷🏼‍♂️

@manwithnoname6580 11 ай бұрын

Impossible without that tool. Please demonstrate how to undo pedals from the INSIDE of the pedal arm using an Allen key

@BBInfinite 11 ай бұрын

Okay

@OntarioGuy430 2 ай бұрын

But it's still so confusing!

@corbett08 3 ай бұрын

I just know front of bike tightens back loosens

@andrewhussey2002 3 ай бұрын

How can something so simple need a video to explain? The "right" hand pedal has the "right" thread direction. Sheesh!

@captainswift8465 3 ай бұрын

Flat pedals on a bike with sram force etap and carbon wheels looks so wrong 😅

@BBInfinite 2 ай бұрын

Unless you are looking for a creak, then it's the right thing to do.

@Motivation095 Жыл бұрын

I have a question and my question is What is the reason of having annoying sound when ever you start pedaling specially when your pedaling in heavy gear? Sorry for my English I'm still learning

@-Flea Жыл бұрын

Are you referring to the clicking noise when the wheel spins? That is a freehub, which is only active either when - the wheel is turning forward but the cranks (the things that the pedals attach to) are not moving - the wheel is turning backwards The reason for this is so you can stop pedalling and the wheel continues moving, otherwise if you stop pedalling the wheel stops moving. This is seen on single speed bikes, also known as fixed geared / ‘fixies’. It makes that noise because there is a ratchet system inside the rear hub which disengage when under load (pedalling) and engage when coasting or when the wheel spins backwards. Sorry for the long comment, but I hope this is helpful :) your English is great by the way!!

@Motivation095 Жыл бұрын

what about the creaking sound when you pedal so hard I try checking my freehub all is fine I try cleaning it and re greasing it again still the creaking sound is still there😢

@-Flea Жыл бұрын

@@Motivation095 it’s your bottom bracket I’d imagine, needs replacing or re-greasing.

@Motivation095 Жыл бұрын

Oh ok thanks for all of your advice about love em all it was all very useful idea

@-Flea Жыл бұрын

@@Motivation095 no worries, if you’re still getting issues after fixing the bottom bracket feel free to ask some more questions and I can try and help you some more