EASY REAR STEER Tutorial - How to Install in AXIAL SCX24 & ANY SCALE TRUCK

No video

EASY REAR STEER Tutorial - How to Install in AXIAL SCX24 & ANY SCALE TRUCK

Рет қаралды 72,738

Күн бұрын

Recently I was asked to do a tutorial on installing rear steer into a 1/24 SCX24 1967 Chevrolet C10 4WD (Get one here: bit.ly/3jMgVE1) trail trucks. I chose to install it into my Jeep. We have been installing rear steer into models for years and recently stopped by a hobby store in Langford BC called "Afro's RC & Hobby" shop. Afro was the fella that owned the store and he showed off an SCX24 Chevy with rear steer. It was owned by Jordan, and employee of the store - and Jordan showed it off on the indoor trail course. SO COOL! Thank you Jordan and Afro. (www.afrorc.ca)
I hope this video will help all of my friends out there in the world of RC who needed to see how to install this kind of steering system into a hobby truck. This is the SAME MOD that can be done on ANY SCALE of electric scale truck that uses axles and servos.
WATCH MORE RCSPARKS!
“Recent Uploads" bit.ly/2jcC9Rk
"Unboxing Episodes" : bit.ly/2AH6A6B
"1 Million Views Club": bit.ly/2AYVrAF
RCSPARKS Shirts & MERCH: shop.spreadshi...
SOCIAL NETWORKS:
Instagram: / rcsparkstudio
Facebook: / rcsparks.studio
Twitter: / rc_sparks
Forum: www.rcsparks.com

Пікірлер: 269

@rcpete7055 3 жыл бұрын

RC has become such a big hobby now and not just cars and trucks there are planes, Drones, boats ect.. They have all become so amazing in the past few years 👍😊

@poppygoatshomestead 3 жыл бұрын

Well said!

@ericpeterson9676 3 жыл бұрын

And only getting better..🤘🤘🤘

@damedcamera 3 жыл бұрын

You know I’m watching lol I’m a little unsure of going rear steer. Can’t rule it out though lol. I still have 2 more Rc’s coming in December. I’ll check the cost of all the parts and we’ll see what happens 👍 great tutorial by the way!

@paulmills3418 3 жыл бұрын

WOW, I bet the knowledge you did get in this video is from the years of doing what hobbies you love doing

@worth_having_fun5133 3 жыл бұрын

You got me in to crawlers 5 years ago, I came across one of your videos of you and Gem out with SCX10’s while I was thinking about getting in to Rc drifting, I’ve never looked back since I got my first SCX10 all those years ago and now from watching all your 24th scale videos I now have my first 24th scale. You do a top job and it’s been a pleasure watching your videos over the past 5 years 😉👍🏻

@matthewfreeman1986 3 жыл бұрын

Great! Now I have to get another front axle and servo.

@CM-ig2pf 3 жыл бұрын

I love how you walked us through the conversion. a little explanation goes a long way! Thank you 👍😁

@dramacidalrc9714 3 жыл бұрын

Absolutely still watching your channel. I think I’ve almost seen every single episode and I love every last one of them. 💯🤙😁

@poppygoatshomestead 3 жыл бұрын

Thanks Kris! Always good to see you in the comment section. Thank you!

@dramacidalrc9714 3 жыл бұрын

@@poppygoatshomestead soooooo, wish I could comment on so many more but no computer unfortunately 👎 but when I can I comment on the ol iPhone 😁 smart TVs not so smart, won’t let me comment either 😡

@quentinkeller5254 3 жыл бұрын

Medic you always make this hobby exciting and fun.

@jakerichardson7973 3 жыл бұрын

A T-harness that splits the steering output should give you full-time crab steering with the wheel.

@Xofroggy 3 жыл бұрын

actually doing this with my betty as well as hot racing shocks, i found one thing that should be noted maybe as a pinned comment, if you are using the stock receiver you will need an extension cable to reach from the back to the front as the stock cable is too short to reach all the way, also with the betty and the deadbolt youll need a different rear mount for the body, because the full plate on them is in the way of full flex with the servo

3 жыл бұрын

this version of all-wheel steering is really cool, and in a small scale truck it is great........thumbs up👍👍

@SomeAnyBody 3 жыл бұрын

I just ordered 2 of these for the wife and I. Now trying to resist ordering upgrades before they are delivered. Lol

@loganyoutube4818 3 жыл бұрын

Can’t wait for a test run on a trail

@mikeguerrieri9560 3 жыл бұрын

Although I have been watching your videos off and on for some time I finally pulled the trigger and bought an RC. Just two weeks before having spinal fusion surgery. I haven't even got the thing dirty yet. I ended up getting an Axial Wraith Spawn knowing there are possibly better rigs available but I've wanted one since I first saw your first few videos on it when you first got it. Yes I've been putting it off for that long😲. Life, ya know. Besides, it fit the budget and the local hobby store had one in the shelf. So as I sit at home recovering from surgery, I've been binge watching about RC trail trucks and crawlers and one thing I keep thinking about is rear steer because, let's face it, the turning radius of the Spawn sucks. This little video has taken some of the mystery out of the process for me. Thank you. Also, glad to see your health improving (been keeping up on that as well, I certainly can relate) keep up the good work.

@poppygoatshomestead 3 жыл бұрын

I really hope you gt to pay with that wraith soon, because you have recovered quickly. Sending healing vibes your way

@mikeguerrieri9560 3 жыл бұрын

@@poppygoatshomestead Thanks! I managed to get out to my shop and run it around inside but it's just not the same. I may be hitting you up for some tips as most of the upgrade info I've found is somewhat dated. Thanks again 😉

@ianvogel8403 3 жыл бұрын

I have GOT to do this just as soon as I get my metal Hot Racing Steering Linkage. I've got an extra plastic front axle case and set of stock front axles from swapping out for the +4 offset axles and for the metal axles front and rear. I even have two extra Emax servos, the metal servo mount and still kept the stock servo mount; April 23rd I'm GONNA DO THIIIIIIIIIIIIIIIIIIIII$$$$$$$!!!!!!!!!!! WOOOOOOOOOOOOOOO, I cannot wait. So I'll get the +4 offset axles at rear and the stock axles at front, Sawwwwweeeeeeeeeeeeeet!

@5amskateboards291 3 жыл бұрын

Hope you're enjoying yourself on our lovely rocky trail truck heaven of an island.

@jmocrawls 3 жыл бұрын

Still the best and original KZfaq RC channel. 😁

@LonnieHutchinson90 3 жыл бұрын

Awesome video never knew it was so easy

@poppygoatshomestead 3 жыл бұрын

Exactly. I wanted to take the anxiety out of it for everyone. Its super simple, and can be done on all scales of trail trucks

@LonnieHutchinson90 3 жыл бұрын

@@poppygoatshomestead thanks I just got the c10 because you make it look awesome and it definitely is a awesome little truck

@jdubbfam37 3 жыл бұрын

Finally I get to sit and enjoy a segment . Glad to be here bin busy. But I've bin liking all the videos. Relaxing time and watch some rcsparks man lol yeah

@khajiitten5252 2 жыл бұрын

After stumbling upon You Tube Gold, then seeing the TTC competitions I started looking into the hobby. I think mini crawlers are a good start for beginners. Ty RCSparks and the whole RC community for showing us how far and diverse the RC world has become.

@jdubbfam37 3 жыл бұрын

It's realy nice to see all of you mentioning each other and showing that respect . That realy is antes me to get I to the hobby " great bunch of rc people " it's a shared respect even when we don't agree on something lol . I love this hobby rc dude's

@Vorgto 3 жыл бұрын

Doing rear steer on my short wheelbase Deadbolt this weekend! Glad I can watch how you do it first.

@poppygoatshomestead 3 жыл бұрын

I hope this was helpful and takes the anxiety out of your conversion!

@Vorgto 3 жыл бұрын

@@poppygoatshomestead Thanks. I had some anxiety about the cutting on the chassis I'm planning to do, but I looked up a new one and with those prices. haha let's go.

@Vorgto 3 жыл бұрын

@@poppygoatshomestead all finished with the rear steer and it's super awesome! Did it a bit differently and realized cutting the chassis to shorten the body was useless as the steering linkage now hits first. If you want to see it check it my Instagram. @vorgto

@timallen6035 3 жыл бұрын

Cool mod. Thank you for showing how it's done.

@tobyhall8198 3 жыл бұрын

Definitely interested in the 1/24th scale..those axial are a must buy 👍

@DeeKay617 3 жыл бұрын

So cool , I knew after that Afro video that you would do it ! Thanks to you and your videos I am now into RC and have jumped into the hobby bringing my kids along with me . We watch your videos together and get ideas . So I just bought our 1st RC's I got myself the Axial SCC10 III and got both of my kids SCX24's . Thanks again ! Your friends in Boston

@jasonslezak150 3 жыл бұрын

Love it Afro was great that drift track was cool and the mini crawler course was sick love the channel's

@poppygoatshomestead 3 жыл бұрын

Thanks Jason, you Rock!

@brianonthego 3 жыл бұрын

I appreciate this so much. Just bought my first scx24 yellow Jeep 2 weeks ago. It's sporting a 1/24 scale Bigfoot model body with brass different covers, brass front knuckles and brass wheel weights. Rear steer would be sweet. Thank you.

@poppygoatshomestead 3 жыл бұрын

Right on!

@Jeroen-Engelgeer 3 жыл бұрын

I really like that. Maybe i'll do that to my little Deadbolt. I saw someone, sorry, i forgot his KZfaq name, who had dig and four wheel steering combined

@99dedbuffoons17 3 жыл бұрын

I'm a bit baffled at the fact there's like 17 different motor mounts for all kinds of different motors for it including the double motor mount dude used to make the Dig rig but NOT ONE PERSON has made a fricken DIG unit that fits this? They got em for the Scx10 it CAN'T BE THAT HARD sizing Down an existing product compared to DESIGNING THEM FROM SCRATCH which has been done on shapeways with EVERYTHING for these so WhatDaDillyYo?! 🤷🤦😞😞😞

@99dedbuffoons17 3 жыл бұрын

And I KNOW they make servos small enough to work it

@Jeroen-Engelgeer 3 жыл бұрын

@@99dedbuffoons17 The way i saw it done, was with 2 separate motors and esc.

@davebutler4959 3 жыл бұрын

Thanks for doing that medic! Really awesome idea for these trucks running on tiny courses!

@saltydreamsrc2786 3 жыл бұрын

I will be doing this mode right away! Thanks!

@suprmn1978 3 жыл бұрын

They say great things come in small packages...this one keeps growing in awesomeness! That’s what she said!

@mikebalding1083 3 жыл бұрын

afro is the man i was pissed that i missed your visit. got to come back soon for a trail crawl

@semperatis 3 жыл бұрын

A nice quick and very easy mod...thanks Aaron.

@eduardsklyanin8541 3 жыл бұрын

I made a bunch of parts for my scx24 to get a Revell 76 chevy body onto it with a full interior. People put a ton of time into these little trucks and it's always cool to see what else can be done with this platform.

@ericviger4984 3 жыл бұрын

Dude you already know I'm still watching. Even though we've never met face to face, I've been watching and commenting since damn near the beginning!

@michaelthomas3262 3 жыл бұрын

man, the weather looks so good on Vancouver Island :) have a nice Time

@jdubbfam37 3 жыл бұрын

Goo to see you moving around wishing the best of health to you and the family and friends. Great content.

@normanharris593 3 жыл бұрын

Absolutely think your channel is worth watching, brother you and your family are amazing, you are the reason I got back into RC after being out for almost 30 years!

@poppygoatshomestead 3 жыл бұрын

I appreciate that, RIGHT ON!

@chbiscuit75 3 жыл бұрын

Woah. That was simple enough. I try to make things way too har....ahem, difficult sometimes. (I've seen enough shows now to know I have to watch my choice of words.) :)

@bugsy742 3 жыл бұрын

Mate this channel is what has brought my family together- 5 of us all with a different scx 24 👍😎 we’ve built an awesome course in our whole polly tunnel 😃 🙏🙏🙏

@lylekehrer6159 3 жыл бұрын

I figured that you would be doing this, and of course on the C10 it wouldn't look right. I did catch Lyle's GRAVE DIGGER video, and DEFINITELY this should be added to that!

@victorpuiatti 3 жыл бұрын

I can't wait till it's your turn and afro gets to come to the RC spark studio! I really enjoyed your time with him was very cool 👍👍👍

@chriswalter4887 3 жыл бұрын

I had done it to my little kulak and i used a flightcontroller. Now i have proposional steering on both axels, very cool in my opinion

@GrowOhighO 3 жыл бұрын

Really now I'm going to have to buy two of them!!

@chrispritchard3463 3 жыл бұрын

I’m sure that I’ve watched every episode on both channels! Can’t get enough!

@davidbagley9551 3 жыл бұрын

Of course we still watching . ain't planning on stopping

@ericpeterson9676 3 жыл бұрын

Back again to say thanks for the video as of now I have 4 wheel steer. Still have some things to do to it but, "I gotta say it's a whole different crawler with 4 wheel steer".

@poppygoatshomestead 3 жыл бұрын

RIGHT?! Nice one man.. enjoy the massive upgrade!

@ericpeterson9676 3 жыл бұрын

@@poppygoatshomestead www.ebay.com/itm/Axial-SCX24-Mil-Stone-4-Wheel-Spacer-Weight-Kit-with-Barrel-Nuts-Sleeves/254753500658?hash=item3b507dedf2:g:ec8AAOSw6TtdQeai Check them out and let me know what you think..

@GoatOffroad 3 жыл бұрын

That is awesome!! Now if you can show me how to do it on my Gray Goat 🐐( 2000 XJ 1:1 ) I would be the cool girl out on the trails! ❤️🐞

@fastkrt10 3 жыл бұрын

Dude still here. Love all the vids you do. Thanks for making rc so great and easy to understand. Still look at all your different vids when I don't know something.

@scottvanbuskirk3653 3 жыл бұрын

I did 4 wheel steer on my everest 10 crawler but I used a airplane servo reverse cable, I can't crab steer but I now have 4 wheel steer and got a shorter turning radius works great

@hemitj 3 жыл бұрын

Always watch all of your videos all the way to the end! Another great video! Thanks for the info.

@poppygoatshomestead 3 жыл бұрын

Awesome, thank you!

@JD4-70 Жыл бұрын

I done this on my 1:10 Rc when I was a complete novice, instead of plugging my rear steering servo into the aux, I just hooked up the wires the the front servo wires and boom you have proportional steering, downside to this method is that you can’t turn off 4ws.

@creekcreeperrc7972 2 жыл бұрын

Thank you Medic! You are the man! Much appreciated information 👍🏻👍🏻

@briangardner665 3 жыл бұрын

You made it look easy. Took the "what now" out of it.

@joshuaslingerland2586 3 жыл бұрын

Thank you man I did this because I was inspired by your other vids bcuz they look sweet and bcuz I have been building a custom 1/10 crawler

@poppygoatshomestead 3 жыл бұрын

Nice Work!! Everything functioning perfectly now?

@f0nn3xp78 3 жыл бұрын

Hey a tip for one handed shear is adding a phone or go pro mount depending on what you use to your controler

@goreyboggs 3 жыл бұрын

Great mod, wanting to pick one up.

@krankillen 3 жыл бұрын

you should know Aaron that I look at most things with you, that you do with your friends! love!

@generalgravy4273 3 жыл бұрын

On Horizon Hobby there's a front axle fully assembled and then if you go on Amazon you can find the steering servo so you don't have to buy a whole nother car

@MichaelMoody324 3 жыл бұрын

Keep up the good work learn lots of things about rc from u and u are funny.

@mikeparr2648 3 жыл бұрын

Definitely still watching. Love both channels. I like the variety of the things you do. I really like the builds and competitions you do. The reviews are cool and informative.

@poppygoatshomestead 3 жыл бұрын

Glad you like them!

@rileysvideos2059 3 жыл бұрын

Tks medic, loving the fresh content even tho loading Kings and KZfaq gold was, hands down, THE BEST utube content EVER! Gonna have to try this mod on my scx24...

@poppygoatshomestead 3 жыл бұрын

Glad you enjoy it!

@calvindirkmaat 3 жыл бұрын

Those tires are crazy

@ImTheJoker4u 3 жыл бұрын

Thats awesome, but now I gotta get two!!😂

@baileysalez4296 Жыл бұрын

I am gonna do this on my lcg chassis thank you for the idea.

@mehimrc1314 3 жыл бұрын

Sir You've just got the crawler world doing 4 wheel donuts. Epic video great shootouts thanks for sharing.

@mattrogers8280 3 жыл бұрын

Very tight fit but I built an on axle set up for my Gen 8. Major help

@satorrotas 3 жыл бұрын

Very interesting video, I saw this great upgrade on the video with Afro's RC, I found it great. I will do it on my scx24, thank you for this great tutorial 😊👍

@poppygoatshomestead 3 жыл бұрын

Glad you liked it!

@satorrotas 3 жыл бұрын

@@poppygoatshomestead Thanks for your great info Aaron 😊👍

@nunodias3331 3 жыл бұрын

i wish that wad a separete receiver so i can use it on mty1/10th scale... thats also a nice ideato use, if someone made a winch for those 1/24 scale trucks

@joshbrunt8040 3 жыл бұрын

So do u think that brass is a great first upgrade, I’m 13 so I don’t have much money to spend so where do u recommend I get the upgrade parts? Great vid keep up the content lovin it!!

@poppygoatshomestead 3 жыл бұрын

Yes, the diff cover for the front, and the spindles for steering.

@joshbrunt8040 3 жыл бұрын

Ok thanks man!🙂

@jdpasltrains 3 жыл бұрын

Wow that is cool rear steering!

@thepatches1219 3 жыл бұрын

Your videos are the best!

@poppygoatshomestead 3 жыл бұрын

Hi Patches, thanks for stopping by and commenting today. Really cool... thanks for the positive vibes

@BraxxJuventa 3 жыл бұрын

Thanks Medic! That modification looks awesome! 👍😁

@The_Pirate_Painter 2 жыл бұрын

thanks for the guide seems real easy i ight try this myself

@dirtberger4533 2 жыл бұрын

Sweet, we just picked up a couple scx24s, ones a Christmas present. We also have a Losi 1/24 trail trekker if anyone remembers them. I want to do this mod to my Deadbolt. So your on the west coast Of Canada now. We're not far, on west coast of Oregon.

@corabbring8198 3 жыл бұрын

That’s great. And now install the rear axle of the Jeep on the green car😜

@mentula3784 2 жыл бұрын

Best video on this subject, you made it look easy which it apparently is! Thankyou for the connection info ❤️

@jacobhamilton3463 3 жыл бұрын

Are you going to do rear steer on one of the Raminators?

@poppygoatshomestead 3 жыл бұрын

No.. I gave one away, and the other Im not interested in changing to rear steer

@terryw.885 3 жыл бұрын

Your awesome brother been watching u now for along time

@scornedlioness8681 3 жыл бұрын

Always love the content!

@poppygoatshomestead 3 жыл бұрын

Thank you so much for stopping by for some entertainment!

@scornedlioness8681 3 жыл бұрын

@@poppygoatshomestead building a scx24 as we speak and have been waiting for this video from you, much love and respect for what you have done for the community.

@poppygoatshomestead 3 жыл бұрын

@@scornedlioness8681 I am humbled by your comment good Sir, thank you for the kind words of respect. Always a Student, Never a Master - there is always something new and cool coming along :)

@scornedlioness8681 3 жыл бұрын

@@poppygoatshomestead Hey I’m a rc girl not a rc sir 😂. Been watching you for years and years through a couple accounts cause I forgot the email on the others lol.

@poppygoatshomestead 3 жыл бұрын

@@scornedlioness8681 Dang it! I know when I was writing it, that I was taking a chance. The username could have gone either way there. Thanks again.. and dang, sorry again! haha :)

@lazycustommodels4421 3 жыл бұрын

Is there a video of how you switched the receiver/whats needed to do it?

@davidskowronski6618 3 жыл бұрын

You're on top doing home videos, of course they're going to pretend like they don't see you but they do!

@brandoku7003 3 жыл бұрын

ive become hooked to watching your videos and its pushed me into buying a black scx24 c10 and im already planning upgrades. i dont have the funds for another hobby what have you done to me XD

@OneLoveRC 2 жыл бұрын

loved it your scx24 is wickid

@SkyBlueOffRoad 3 жыл бұрын

outstanding...quick question, Why did it come with extra, longer, links and shaft parts from the factory?

@poppygoatshomestead 3 жыл бұрын

I dont know brother.. prolly because they are all the same for each model.. some you use, some you dont. Im speculating though

@ericpeterson9676 3 жыл бұрын

Can you do a walk through video on how you binded that spektrum controller ? I have that exact controller..

@krankillen 3 жыл бұрын

you look sharp Aaron!!!

@ianvogel8403 3 жыл бұрын

Thank you so much for the very helpful video by the way!!!

@rcclassiccrawlers4368 3 жыл бұрын

Time to start looking for a steering axle now...lol

@danielslow659 3 жыл бұрын

Mate your stuff is just 🔥🔥🔥. Keep up the great ur doing for rc. Blaze away🔥🔥🥦🔥🥦🔥🥦🔥

@alamanako 3 жыл бұрын

Aww man every time I watch another one of your videos I spend more money! Do I really need rear steer?!? Why yes I do!

@poppygoatshomestead 3 жыл бұрын

Yes you do..LOL!

@ratlme 3 жыл бұрын

Watch all of your videos on both channels. Keep them coming. Great information for us. Thank you again. Have a Happy Thanksgiving as well up in God's Country

@capturetoday67 Жыл бұрын

Finally getting to this mod👊😜

@bradykolodziejczyk8472 2 жыл бұрын

I must know how you got the sr515 setup to work. Just picked one up from my local hobby store and they said there was no way to do it but you sir have clearly proven that wrong.

@bwiese5387 2 жыл бұрын

Thanks man worked like a charm

@motododo4626 3 жыл бұрын

Hey on your remote you can access the 4 wheel steer setting and have proportional steering front and rear. I did it on mine. I have a spektrum dx5c.

@rowntrp 3 жыл бұрын

That’s what I was wondering. If he’s using the Spektrum rugged with a Spektrum receiver then proportional 4 wheel steering should be a breeze. Medic might have been keeping it simple to show how easy it can be with simple settings.

@motododo4626 3 жыл бұрын

@@rowntrp yeah definitely. I believe the same. He probably wanted to show anyone just getting one that on a budget you can use 4 wheel steer. And with the axles being around 20 bucks why not.

@loydcourson5276 3 жыл бұрын

That is so cool!! Thanks!!

@jeffbearden2059 3 жыл бұрын

Always great on your channel to learn new tips and tricks thank you

@HoneyToker Ай бұрын

I have a pretty modified TRX4M. Now I understand they’re different but would I be able to run a splitter cable from the front and rear servo and connect it to the steering/servo channel to gain the 4ws capabilities? I don’t have a 3rd channel or the ability to trim my end points with stock electronics but I’m looking to get more out of it before I have to do that… 😁 long time fan I love the content!