Easy Septic Tank Riser Install

Рет қаралды 49,332

Күн бұрын

Installing a septic tank riser kit from www.wholesalesepticsupply.com
thank you to the sponsor of this video Wholesale Septic Supply. Here is a link to the kit from the video. Make sure to take the appropriate measurements before ordering the kit. Follow the link below and click "Septic Riser Kits" www.wholesalesepticsupply.com
For business inquiries please e-mail me at:
poorpumpersociety@gmail.com
Social Media 💻
Facebook- / poorpumpersociety
Instagram- / poorpumpersociety
****TOOLS I USE IN MY VIDEOS****
-T & T Mighty Probe & Hooks
tinyurl.com/mightyprobe
Cobra Products 60500 Flat Sewer Rod, Gray, 3/4" x 50'
amzn.to/3YjWpOm
Prototek | FTP-8 | 512 Hertz Frequency Flushable Sonde
amzn.to/3ZwCZqC
RIDGID 19238 NaviTrack Scout Locator
amzn.to/41zQDv7
RIDGID 40798 SeeSnake MicroReel
amzn.to/3ZqMXKa
GoPro HERO 10
amzn.to/3SWzyHO
GoPro Head Strap
amzn.to/3SNNiEs
-Varco (Hoses, Fittings, a little of everything) 👇
www.varcopumper.com
Use Key Code: PPS
at checkout
-CrustBuster 👇
bit.ly/poop-smoothie
Add me on Pokemon Go 👇
Download Pokemon Go and use my referral code: HQ44PH6HY
Poor Pumper Dom: 7701 7957 6640
All My Links 👇
linktr.ee/poorpumpersociety
Ditch the Wipes Below 👇
Bidet I use- amzn.to/3TSVyUj
Qleanse - qleanse.com
Use code: POORPUMPERSOCIETY for 20% off your first purchase

Пікірлер: 104

@GD15555 Жыл бұрын

Risers should be part of the code and mandatory. Saves a lot of time and money for everyone.

@Zaphhari Жыл бұрын

Yea that's very true I just watch to be productive I don't have s tank

@sjpropertyservices3987 Жыл бұрын

Tanks for septic pumps are required to have risers to grade level in my state. Other covers are currently required to be at least 8" from surface. If the location of any buried covers is marked I am OK with not having covers at or above grade. However, I still recommend there be access to all covers at grade level. The easier it is to locate and access the tank there more likely it is to be regularly serviced and inspected. I have owned property with covers to risers several inches below grade with bark mulch on top of the covers. It was very easy to access the riser covers anytime of the year and it otherwise looked like a landscaping feature with no plantings on top of the tank.

@bravos6476 Жыл бұрын

They are present day code in most areas, but we been installing tanks without them for a long time. They became code in the late 80s to 90s in my area. Code recently went from 12" dia to 15". So we are still learning.

@joegoldberg1363 Жыл бұрын

I personally can't see the value in using these RISERS. I see an issues with the screws rusting, the plastic dry-rotting in the Sun. There's the chances with people hitting them with lawn mowers. There's also the true fact that the world is full of non recyclable plastics as it is. All this is about is a company selling a product to make money. People are too fat and lazy to actually move and dig a little soil off of a tank. Shit!

@jipjob1 9 ай бұрын

I was quoted a thousand dollars plus for one riser installed. Not cost effective! Probably two grand for all three holes! I just didn’t back fill the hole but used 4x8x2 insulations sheet cut into 8 pcs. Cleaned the top of the tank access and sealed the first insulation block to the tank by using plumber putty. So every 5 years I should just remove the square pieces of Insulation and pick up the lid no digging. Oh yes I placed 1x12 inch square paver stones on top of last square of insulation material. Looks good and like I said cheap to do👍👍👍

@Leonardokite Жыл бұрын

I like that extra safety insert you put in there. I have never seen one of those. I did my risers quite a bit differently. And it's actually more easy for the do-it-yourself person. After measuring I cut the riser pipe to length. (Normally the ADS solid which was HDPE smooth pipe with ribs, and sometimes the or Orenco green risers like you have there.) I then put the riser into the hole and seal it around the edges with some bag concrete that I would mix by hand in a bucket with rubber gloves. This even works well with older tanks that had a very uneven surface to place a riser on. Then it was important to pack the dirt around the riser which is what actually holds it in place. I had a tamping bar I used for that. Like always the biggest trick with surface risers is measuring correctly.

@PoorPumperSociety Жыл бұрын

I’ve seen a lot of people use that method as well! I just hope this inspires more homeowners to install risers on their septic tanks for easy access during maintenance pumping

@jeffpless5036 Жыл бұрын

It makes my heart happy that other ppl in your profession have recognized your value and provided sponsorship to you. This video was so informative and you're a natural teacher. Keep up the great work my friend. And keep making the "poop smoothies".😂😂😂

@vasantsande8644 4 ай бұрын

Just in time what I needed to do with my septic tank. Thanks and God bless.

@Rev1Kev 11 ай бұрын

I recently installed risers on my septic tank, mine were 18 and 24 inches deep, so well worth the investment

@edhowell3961 Жыл бұрын

I installed this exact product on my system last summer. Wished I would of done it years ago. As you stated the hardest part was digging the old lids up.

@josephcarreoniii6434 Жыл бұрын

I really learned a lot from your presentation. You did a great presentation. Thank you.

@RobertAdams-fo7hb 4 ай бұрын

Just installed my riser. Thanks for the video! 😊

@stradostrado 21 сағат бұрын

I put Oak Barrel Rings around the tank lids and used my metal detector 3 times to find the lid openings. I'm tired of digging and am going to do the riser for easy access.

@dangerds1 Жыл бұрын

Wholesale septic supply is a great company to deal with, all facts in this vid , good job

@JEMaude Жыл бұрын

Excellent video. I have learned so much from you about my septic tank. All I knew up to now was how much it cost me to fix Lots of $$$$$

@veronicaalbin6934 Жыл бұрын

TY, great vid for instruction. Also, explanation very thorough especially saving money info! 👍🏻

@dunewolf Жыл бұрын

So I have a septic system and was looking at the tank lid covers - I saw prices on some of the sites I went to as 300+ for basically some plastic.. -accidently found your videos - saw the link - clicked it and holy cow so much cheaper to buy from the company you link then anywhere else.. I was thinking I had to pay 800 to get single kit.. and this sites selling them for way cheaper.. defo going to add this to my septic tank soon as i get the extra funds to buy 2 kits to apply to the 2 lids..

@keithjurena9319 Жыл бұрын

36" tall riser was out of the budget so I bought $20 of masonry supplies and made it with concrete masonry unit caps and 1/4" rebar. Cast the cap on the garage floor on double layer of plastic with MDF form bent into a circle. Cast in two handles.

@terryfelty7440 Жыл бұрын

Thanks dom for your video u share alot of helpful information and tot me a lot about it

@southernskies531 6 ай бұрын

Thanks for posting. Your video is very helpful!👍

@rogerstlaurent8704 Жыл бұрын

Good install on the septic tank risers and good info on where to buy a riser kit its a very easy install just about anyone can do it ... the only thing i would have done differently i would have screwed down the riser kit on top of the tank

@boots7859 Жыл бұрын

Using tap-cons is the right way to do it.

@killerbeez6073 Жыл бұрын

Mmmmmmm SMELLS LIKE MONEY!!! 😁 Your a Stud bro, just bought a new house, well old house. It has a septic tank that was installed in 79 and hasn't been pumped since 03. Almost to the day 20 years, called a company to come pump it out and overall health of the system. Would have call you, but I dont think your in my area lol. Been watching your videos since we moved and a fan of the way you roll. Found the inlet and outlet and dug them up. Want to get your stamp of approval for best customer ;). Thanks for so much awesome info and inspiring to be proactive of taking care of shit.

@stradostrado 21 сағат бұрын

Your video is the best one I've seen. Thanks.

@boots7859 Жыл бұрын

You will get a better seal if you clean the tank vs just scraping the dust off. At least, thats what I'm doing for mine. And while I have to make a new concrete cover for mine as its out of round, I prefer having it out of site vs a giant reminder for everyone that thats where the poop goes.

@StefanKirby 11 ай бұрын

Hey, thank you for your videos, I've been learning a lot. My tank's lids are round, but have no handles, so you have to pry them off with a prybar. But the inlet lid is about two and a half feet below grade, the outlet is about two feet below (sloping backyard), and I don't ever want to have to dig those out again. Twice was enough. Anyway, I was worried about being able to pry the lid off once the riser was in place, because some of the first videos I saw showed the lids going back in after the risers had been installed, but it was with a long hook - can't do that here. Seen further videos now, and I'm getting the sense that - as long as the riser and adapter are all assembled correctly, and sealed and mounted securely - we actually just do away with the concrete lids completely, once the riser is installed. Yeah?

@er2352 3 ай бұрын

Excelent, thank you again for this video, 👍👍

@PRO4XKEV 9 ай бұрын

Nice work, looks good, thanks for the info.

@randyvac01 Жыл бұрын

I was on a job once were the customer refused risers. I told him it would save him a lot of time, money and his yard but still refused. He said he didn't like the way the risers are noticeable and ugly. But he got upset again when the septic people came back three years later charged him for digging the lids and ruined his yard, that took him a long time to grow back. And he still refused the risers again.

@boots7859 Жыл бұрын

I agree with the guy. I've got a lid for the main septic and one for the effluent about 12' from the back of my house, side of a new 700sqf deck. I sure as f don't want 2 big green signs that'll remind everyone where the poop is. Throw some dirt or gravel on top, a couple of those nice large planter pots or 1/2 bourbon barrel planters and everyone is happy.

@randyvac01 Жыл бұрын

@@boots7859 That is a good idea.

@orlandoarocho4973 5 ай бұрын

Great video bro! Thank you 👊

@sjpropertyservices3987 Жыл бұрын

I do not pump tanks, but I do inspect septic systems. I recommend risers be installed on all tank covers to facilitate servicing and/or inspecting the tank. Most older tanks in my area have 3 covers. Newer tanks have 2. As you stated in your video, many home owners do not know where the tank us and it can be several feet deep. Every tank will need to be accessed at some time, the only question is when. Therefore, having risers installed is a prudent investment. Whether it is for periodic maintenance, e.g. cleaning the screen/filter on an outlet baffle, or having the tank pumped, being able to locate and access the tank will save time and money in the long run. I have installed what appears to be the same riser and get mine from a different distributor. I am going to check out Wholesale Septic Supply as an additional option.

@bmo14lax Жыл бұрын

Service guy recommends risers, checks out :D Just a little jab, definitely know what you mean bud, and good advice.

@YaBoyDC 11 ай бұрын

I bought one of those and installed it earlier this year

@Keith_Mikell Жыл бұрын

If you are doing this to demo to people if they want to do it. Make sure to emphasize that sealing It is very, very important. I have a brand new tank that was just installed and the guy didn’t seal the risers this summer. I have to go in take both lids off let everything dry out. Then dowse down the entire riser set with flexseal. I have a 6 riser insert stack. If you do not get a good seal, you will smell septage. That’s what I’m experiencing right now and all ground water will enter your septic tank which is also what I’m experiencing right now.

@jamiemixxismjohnson4193 Жыл бұрын

Hmmmmm saves time and money? If I ever more out of the city I'm getting them!

@davidshauck6886 6 ай бұрын

Thank you for the video

@XanderVerse1 Жыл бұрын

Nice informative video bro!

@charlottethomas7483 Жыл бұрын

I love your vids

@panelpal111 9 ай бұрын

Love this channel

@kennethkoontz5036 Жыл бұрын

Also, if you wanna treat the system ( roots, ect ), you have easy access.

@jeffthomas5866 Жыл бұрын

How long does it take the sealant to 'set'/cure?

@blt981 9 ай бұрын

Septic guys did this to my gray water tank when 23 yr pump gave out but THEY USED CEMENY BOLTS TO ADDITIONALLY SECURE RISERS TO SEPTIC TANK

@philibeansor5843 Жыл бұрын

I’m trying to keep little Timmy from falling down the well. Do they make a kit for wells also ?

@paulbarrows3244 Жыл бұрын

Your thoughts on RV people using these lids to dump their tanks on top of the scum layer?

@marksullivan5141 Ай бұрын

Question: where do you store your risers on your truck? (Love all your videos by the way)

@josephcarreoniii6434 Жыл бұрын

I forgot to tell you that I love your videos also.

@tom20349 Ай бұрын

Like the Video, but do you think that that sealant is really sufficient that's seals the lid to the tank. What about some concrete In addition to the ceiling to round the lid like a hydraulic cement.?

@davidsmith2907 Жыл бұрын

My lid is 20×20 rectangular. What size rizer do I need

@mikebelcher6692 10 ай бұрын

Had new 1K tank installed today, not covered or passed inspection yet. Can I get a riser kit to install before tank is final covered?

@agreer5429 Жыл бұрын

Can risers be fixed if damaged or old?

@jeffthomas5866 Жыл бұрын

Would not have thought the sealant would've adhered well to the concrete surface that had dirt on it, even though it was brushed off. Any issues with the riser staying adhered to the concrete tank top ring?

@boots7859 Жыл бұрын

Thought the same. I've got to do something similar to mine, and a wire brush, wet-vac and some soapy water. That sealant is probably 50% stuck to dirt, and didn't use tap-cons or other screw anchors...

@jocelynmeredith3829 3 ай бұрын

Can this type of riser be used in northern climates where ground freezes?

@loganbowen6421 6 ай бұрын

I have 2 tanks with 2 lids each, do all 4 need risers or just the 2 inlet lids?

@pinewindowcleaning3222 2 ай бұрын

Dicen que le cayo una pelota de tennis en la cabeza a Rune, quizas le afecto eso?

@serenity5259 Жыл бұрын

Keep it up i love your videos.

@PoorPumperSociety Жыл бұрын

Thank you!

@Buzzardthunder Жыл бұрын

We live in a city do I even have one?

@xersrt Жыл бұрын

I noticed the 24x16 kit is 290 is my area a contractor is charging 575 to install it with materials. We have really hard red clay here so hand digging is a pain when you factor the mini ex, tools experience the contractor price is really fair I see this mostly be used in areas with soft dirt.

@PoorPumperSociety Жыл бұрын

Risers make our jobs as pumpers so much easier. That’s probably why most people don’t charge a crazy amount to install them

@DigitalIP 10 ай бұрын

I have it done every 2 years, next year i'll be digging them up to save on the bill and so the guys dont have to. At some point ill get risers, but meh..

@meltonhubbard6190 15 күн бұрын

Excellent job smell money 😊

@bobbiemauk1879 Жыл бұрын

It should be a law that aerobic installers MUST put a riser on that trash tank. Most customers don't even know they have another tank and pumpers have come before us and don't bother to pump it out or even tell them it's there.

@pinewindowcleaning3222 2 ай бұрын

They say a tennis ball fell in Rune's head yesterday, maybe that affected him?

@magnolia2slim 9 ай бұрын

This customer should be goood to go for the next 3-5 years!

@eternaldienasty7270 5 ай бұрын

My tank lid doesn’t have an access cover, the whole lid has to come off for access. I guess I have to cut my own hole ? 🥺

@buckshot6481 2 ай бұрын

Not allowed where I live, it must be at least two feet below ground !

@ragingbull3406 9 ай бұрын

Would be even better if the riser actually fit inside the hole.

@michaelh370 Жыл бұрын

I got a rise out of this video. Stay saucy PPS.

@agreer5429 Жыл бұрын

If you have a one compartment tank that has an aerator that runs it. What type tank is it called?

@danielbickford3458 Жыл бұрын

Im morbidly curious, have homeowners associations ever gotten pissed over risers and being "eyesores" and the like

@PoorPumperSociety Жыл бұрын

Most homes in HOAs here in central Texas have aerobic septic systems, so septic risers are a requirement as they are inspected quarterly

@danielbickford3458 Жыл бұрын

@@PoorPumperSociety I was half expecting you to respond with a horror story about someone demanding you bury someone else's risers.

@tom20349 Ай бұрын

What's funny people think that because you have a rise? Or that the septic tank company will charge you less. Cuz they don't have to dig. They charge you the same either way.

@irecruitfish7410 3 ай бұрын

Are they all circle? I have a square lid(concrete)

@karimah8687 10 ай бұрын

I’m concerned about that plastic. I live in Texas in direct sunlight and anything that is made from cheap plastic will get brittle and crack from the sun.

@jG-gm2mz Жыл бұрын

I still buried mine lmao

@dagmont4605 Жыл бұрын

Hack. Garbage install.

@PoorPumperSociety Жыл бұрын

Thousands in the ground here in Texas with this method. No problems

@dagmont4605 Жыл бұрын

@@PoorPumperSociety a simple real brushing, air blowing, or washing would have gone far. If not that then a couple tap cons to secure it to the concrete.

@charlesbrazeau5923 Жыл бұрын

@@dagmont4605 i agree with this. I would never install this without tapcons

@xersrt Жыл бұрын

Tap cons? You aren’t holding down a building lol. I don’t like spray foam or rubber silicone a 80 pound bag of quickCrete per lid is plenty.

@charlesbrazeau5923 Жыл бұрын

@@xersrt time is money. If you prefer the time and material involved in mixing concrete versus drilling tapcons, whatever float your boat. There are predetermined places for tapcons from the manufacturer in the adapter ring

@Yawwee 3 ай бұрын

Nice video - well appreciated !!!! Thanks.

@rkochair 4 ай бұрын

Do you ever put anchors/screws in the piece that you set onto the concrete tank?

@user-od4op6ng9y Жыл бұрын

How much extra is it for the customer to have them locate and dig tank?

@killerbeez6073 Жыл бұрын

Not sure where you are but in my area average is 85 every 1/2 hour. So alot.

@mikesowers7464 Жыл бұрын

@@killerbeez6073 I just had mine done for the first time. Locate, dig about 3 ft and pump out. Total cost $ 750.00. The driver educated me about the need for the riser kit to save me $$$ next time. He left both lids installed but didn't back fill the dirt. Glad I found this great video with the link for parts. Looks like my next project ! I live in Southern Nevada.