Easy Spark Plug Change for your FRS

No video

Easy Spark Plug Change for your FRS

Рет қаралды 27,987

Күн бұрын

Spark plugs play a very important role in how our car functions, so replacing them within the suggested time frame should certainly be a part of your routine maintenance. However, with our engine set up the way it is, the spark plugs aren't the easiest thing to access so I show you exactly what you need to do to change your spark plugs without having to unbolt the engine mounts and jack up your engine.
Current Setup
Verus Engineering UCW Rear Wing
Verus Engineering Composite Front Splitter
Verus Engineering Air Dam
FT86SpeedFactory UEL Header
Verus Engineering Hood Louvers
Perrin Oil Cooler
Stoptech C43 Big Brake Kit
Hawk HP+ Pads
Verus Engineering Brake Cooling Kit
Apex EC-7R 17x9 +35mm
Bridgestone Potenza RE-71R 245/40/17
Rays Gram Lights 57CR Ceramic White Pearl 17x9 +38
Falken Azenis FK510 245/40/17
Remark R1 Spec Titanium Catback Exhaust
Tomei Front Pipe
Motiv Overpipe
Recaro Profi SPG
Buddy Club Super Low Down Seat Rails
Helix Depo K Shade Tail Lights
17+ Instrument Cluster w/ Digital Display
Gerald Just Projects Cluster Retrofit Kit: tinyurl.com/2p...
Instagram: / thekevinvo

Пікірлер: 94

@damfnmaster 3 жыл бұрын

Mechanics hate this video but we love it! Saved everyone a lot of money broooo.

@KevinVo 3 жыл бұрын

You are the mechanic now 😉

@timwaltman7890 2 жыл бұрын

We definitely don't hate this video, the fact that a "car enthusiast" can learn to know at least the minimum basics... of changing plugs, oil, etc. Etc... And KZfaq is great for that. lol I work on alot of other imports and heard a frs was coming in for plugs so I figured I'd see if there were tips/trick for doing this job that is billed out to have alot more time. And to Kevin/KZfaqr thanks for helping the community.

@FRS_Heero 3 жыл бұрын

Thanks Kev. Just did the install as you explained in. "Thank God has given me skinny hands." 🙌

@KevinVo 3 жыл бұрын

Glad I was of some assistance!

@CrystalRavenSilica 3 жыл бұрын

It’s more tedious than hard, I use a different set up of tools for each plug to accommodate for lack of room… and it’s a plus when you got small hands. Great video as always!

@KevinVo 3 жыл бұрын

You're spot on with that. A lot of people make it seem harder than it actually is.

@vision1707 Жыл бұрын

Hi, could you please share what "set up of tools " you used . I have small hands as well . Thank you.

@vision1707 Жыл бұрын

@@KevinVo I have the 2017 automatic toyota 86 . Is it the same set up and do i need additonal tools ?

@KevinVo Жыл бұрын

@@vision1707 it's the same

@vision1707 Жыл бұрын

Crystal , you had mentioned " different set up of tools for each plug to accommodate for lack of room " ? Could you please share that info. Thank you.

@Victor-bx9hr 3 жыл бұрын

By far the best demo of spark plug change. Thanks for the vid! Looking forward to seeing one done on new GR 86 some years away!

@KevinVo 3 жыл бұрын

Glad it was helpful for you!

@mtvideos8 3 жыл бұрын

Great video Kevin, now I won’t dread this as much when I need to do it down the road.

@KevinVo 3 жыл бұрын

You can do it!

@Carlos.Rivera 3 жыл бұрын

That magnet was the boss right there, the job was a breeze. Next time i will do your way, before the engine mount was removed and jacked up to make room.

@KevinVo 3 жыл бұрын

The magnet is a must and makes it a lot easier!

@smokingpacman 2 жыл бұрын

I just did it using the exact technique that you did, thank you very much for this video!

@KevinVo 2 жыл бұрын

Glad it helped! Thanks for watching!

@brzarth 2 ай бұрын

Just did this in my 2017 brz and it was easy. The metal clips that hold in the coil packs just unclips using a flat head. Took about 1.5 hours to do all sides without jacking the motor up.

@Dr_Lord Жыл бұрын

Another great how to video to save hundreds of dollars in time and labor costs.

@petahlee 3 жыл бұрын

Thank you, this is quite a bit easier than the internet makes it out to be! =)

@KevinVo 3 жыл бұрын

All about having the right tools and knowing what needs to be done!

@recklesslyarrogant7242 3 жыл бұрын

Great video !!! Very well explained and definitely took away the stress. Keep it up !!! Good job.

@KevinVo 3 жыл бұрын

Glad it helped!

@GhostPLUR 3 жыл бұрын

Been waiting for a video exactly like this, thanks!

@KevinVo 3 жыл бұрын

Glad to help!

@TwilightMasterC 3 жыл бұрын

Thank you Sensei! Great video as always 🙏

@Camachoooooo 2 жыл бұрын

Excited to do mine this weekend thank you!

@buddybestor 3 жыл бұрын

Excellent video!

@KevinVo 3 жыл бұрын

Glad you liked it!

@Treaxvour 3 ай бұрын

Kev bro, you the man

@sindthekid 2 жыл бұрын

excellent video!

@KevinVo 2 жыл бұрын

Thank you very much!

@msk_xx8085 2 жыл бұрын

Is it possible to remove the coil packs without disconnecting them?

@KevinVo 2 жыл бұрын

I don't think there's enough slack in the wires to do so.

@msk_xx8085 2 жыл бұрын

@@KevinVo Dang that sucks because my coil pack will not unplug from the wire, no matter how much force I pull it with

@Shiftheads 9 ай бұрын

I usually just wait until my rod bearing lets go. Then I put plugs in the new motor I'm installing 🤣

@BenGT86 3 жыл бұрын

Hey Kevin, I am a german GT86 driver and my english is not the best ;) But nevertheless very nice tutorial. One question can you give me please a list with all necessary tools. That would be great. Maybe you can put it in the description for all people. thanks a lot. Benni

@KevinVo 3 жыл бұрын

Hi, Ben! Here's the list of tools you'll need. 3/8 inch Ratchet 3 inch extension 14mm deep well socket - Spark plug 10mm socket - ECU, Fuel Line Bracket, Coil packs 12mm socket - Strut Tower Brace, Fuel Rail Cover Flathead screwdriver - To pry extension of ratchet Needlenose Pliers - Unclip fuel lines from bracket

@pfunk34 Жыл бұрын

Just came across your video... nice job! Are you worried that you may change the sparkplug gap when you are trying to push the socket to seat the sparkplug? I think I'm missing something here because doesn't the sparkplug need to brace against "something" until the socket seats itself? Just a fear I have...

@KevinVo Жыл бұрын

For the actual install I don't use the dedicated spark plug socket. I just use a normal deep socket so there is minal pressure on the plug.

@P1ST0N580 2 жыл бұрын

This will take you 4hrs stop playing. I like how you never mentioned the metal clips on the coil packs plug Dick. That made it fun

@KevinVo 2 жыл бұрын

Alex, I've done this countless times. With the right tools and process this can be done well under 4 hours. My coil packs do not have a metal clip holding them in place. Do you have a 17+ model?

@P1ST0N580 2 жыл бұрын

@@KevinVo ayyyyy what’s up Kevin you not really a Dick haha first off. But I have a 2015 FRS and they do have the metal clips holding the coil packs in place with the plugs. And it is very hard to get them off. I got lucky on the passenger side but the driver side is on another level hard to get off

@msk_xx8085 2 жыл бұрын

@@P1ST0N580 How did you manage to get them off in the end? Did you pull up or push down on them using which tool?

@shinigami052 3 жыл бұрын

The way you did it does look easier but having replaced spark plugs in my Camry like 4 times, this looks like a nightmare. Not looking forward to hitting 60K

@slipstream615 3 жыл бұрын

Instead of using the 3 in. extension, I used a elbow joint socket. Easier to maneuver the socket in to remove or install the spark plugs.

@KevinVo 3 жыл бұрын

Nice! Whatever works for you. Unfortunately, when I tried that it didn't stick far enough out to put a ratchet on.

@slipstream615 3 жыл бұрын

@@KevinVo must of been a shorter elbow or socket you have. That’s too bad, could have saved you the trouble of prying off the 3 in. extender. Good tutorial video still 👍

@KevinVo 3 жыл бұрын

@@slipstream615 Will have to keep that in mind for next time.

@oxyg3n520 3 жыл бұрын

the 3" extension barely stuck out enough to insert the ratchet into. Is there an elbow joint that long? Can you post which one you're using? Thanks.

@slipstream615 3 жыл бұрын

@@oxyg3n520 use a 3/8 3 in. extension with a 3/8 elbow socket, then insert into the spark plug cavity. The elbow socket will give extra length and allow you to maneuver in and out spark plug cavity. I just used Pittsburg elbow and extension from Harbor freight. Hope that helps.

@dancingswan1484 Жыл бұрын

Cheers for sharing

@deanczok3022 3 жыл бұрын

Hey Kevin. Like your videos. Question: I have a 2014 Scion FRS, Would you recommend someone trying to do the spark plug replacement themselves if they have never done it at all? Or would it be wiser to go to a shop? I have a small mechanics tool set but not sure if it would have all the necessary tools that you are showing in the video. I definitely don't have that flexible magnet.(what is the exact name of it and where can you order it from?) How long (how many more miles) can you wait if you're overdue for a 60K checkup until the spark plugs start making problems? Thanks for any advice.

@KevinVo 3 жыл бұрын

Appreciate the support, Dean! I would encourage you to try to do them yourself, but would recommend that you get all the necessary tools before doing so. Having everything I highlighted in the video will make this a lot less of a headache. You can pick up the flexible magnet at a Harbor Freight, Home Depot, Lowe's, or Menards. I believe it's just called a flexible magnetic pickup tool. I can't really say how long until problems could occur because it's depends on a lot of different factors, but if you don't do it right at 60k you should still be fine. Just try to do it as soon as you can.

@twiceasbright2219 Жыл бұрын

Watch counter steer garage video they list tools needed 14 and 12 mill deepsocket 3/8 ratchet 1/4 ratchet 10 mill socket 3 inch extension 10 inch extension for 3/8 drive and a magnet tool Im doing mine this week I'm at 87k lol

@DistanceCinema 10 ай бұрын

Can anyone help. Not sure what spark plugs I’m supposed to get. From Australia so my choice would be through Supercheap / autobarn or repco Could anyone help me thanks, coming up with Bosch double iridium VR8NII35U

@BobKenge 2 жыл бұрын

Good

@aureliomolina2217 3 жыл бұрын

You the best👍✌💪

@KevinVo 3 жыл бұрын

Thanks!

@MrDice347 2 жыл бұрын

Such a faf, but thank god it's possible without dismounting the engine

@KevinVo 2 жыл бұрын

Certainly manageable without lifting the engine.

@HxCKam Жыл бұрын

Lol my extension is stuck on socket wishes i had enough hand strength to get the socket off

@chrishenegar 3 жыл бұрын

Do your oem Toyota spark plugs on the website come pre gapped?

@KevinVo 3 жыл бұрын

Yes, they do. That being said, it's always a good idea to double check them just in case.

@BURRhypopo Жыл бұрын

Thanks for the vid Kev. Is the magnet necessary though? Or can you just reach with your fingers

@bryceschaefer6439 Жыл бұрын

Yes. I found it to be absolutely necessary. Also, do get the bendable kind like he has. I tried it with one of those straight telescoping ones, and only lucked out because I was able to half break / bend it at an angle to work for this.

@BURRhypopo Жыл бұрын

@@bryceschaefer6439 I actually did it without the magnet, managed to wedge my pinky in the socket and pull it out, although just on the ecu side. Not sure how I’d go on the other side

@razerty8921 3 жыл бұрын

Road to 1k !

@KevinVo 3 жыл бұрын

We'll give it our best shot!

@trentoncarnes8151 3 жыл бұрын

Doing spark plugs today ! Any recommendations on sparks plugs that work well with e85?

@buddybestor 3 жыл бұрын

Probably the factory still. Spark won't change with e85. e85 will just be more taxing on the Fuel Pump and Injectors...which even that you'll only need to upgrade if your running forced induction with over 350hp.

@KevinVo 3 жыл бұрын

You'll be perfectly fine with the OEM plugs.

@trentoncarnes8151 3 жыл бұрын

Got them changed . Car started but feels like I’m holding back power!? I got a dw65 pump and 700cc injectors

@buddybestor 3 жыл бұрын

@@trentoncarnes8151 do you have a way to log your parameters like a/f ratio, fuel trims, rpm, advanced multiplier...start from like 3k rpm and take it to red line in like 3rd and 4rth gear and see what those parameters are doing during that rpm range. Ignition timing, advance, fuel pulse, etc could be off. No way to tell unless you start tracking!

@camryds 3 жыл бұрын

this is an awesome vid -- this is just not going to happen with my fat ass hands. plus with a Turbo in the system, this is impossiburu!

@KevinVo 3 жыл бұрын

It's certainly difficult if you have larger hands 😅

@Aaron-fb6mb 9 ай бұрын

Ur goated

@Leo-im6vv Жыл бұрын

I just finished doing the right side... it took me 3.5 hours.................. :(

@YSoAggressive 2 жыл бұрын

Tool List?

@KevinVo 2 жыл бұрын

3/8 & 1/4 in. Ratchet 10mm Socket 12mm Socket 14mm Socket 3 in. Extension Needle Nose Pliers Flexible Magnetic Retrieval Tool Flathead Screwdriver (Used to pry extension off ratchet once spark plug is loose)

@fuglyxs3514 3 жыл бұрын

Good luck to anybody that can unplug the coilpacks. A lot harder than it looks, if anyone has some tips, please help.

@KevinVo 3 жыл бұрын

I didn't have much of a problem unplugging them. If you find yourself not having enough room, I'd recommend jacking up the engine.

@fuglyxs3514 3 жыл бұрын

@@KevinVo Yeah I saw that in both your new and old video that it just unplugged so easy. My driverside, closest to the firewall, doesnt want to unplug. I'm going to go for round 2 with some needle nose pliers next.

@msk_xx8085 2 жыл бұрын

@@fuglyxs3514 How did you end up unplugging it? What way did you push/pull on the clip using what

@fuglyxs3514 2 жыл бұрын

@@msk_xx8085 Never went back and tried it again since I was 20K miles early. But yeah, I couldnt figure out if I was pushing down on the right tab or not. I tried every which way and it wouldn't budge.

@msk_xx8085 2 жыл бұрын

@@fuglyxs3514 Was it possible in anyway to just remove the ignition coil without unplugging it?

@codymiller6159 Жыл бұрын

He said you can bend the coil pack because it’s rubber but please be careful I have broken the tip off stuck onto the spark plug in a different car and it was terrible pls be careful