for someone who is currently trying this to his own car , sir this was amazing.

That windshield is worth more than the entire car 😂

Great job. The owner must be happy

Bro that hand set was wild. Only the one woods cup and you didn’t need to line up anything. I’d love to do that with a heavy ass windshield lol

Just my luck, I have a Corolla to change a windshield on and I was just looking for a general video 😅 thank you so much

Probably my most enjoyable diy on a car so far, plus great choice of music, very relaxing.

Sir i have worked as a windscreen fitter for 6 months and watching you sketched me tf out 😂

Excellent video mate good job

Ive never seen someone put so much effort into protecting a customers car on an install... especially not an old car with paint fade and obviously at least 1 other windshield install. Only critique i would give you big dawg is get a BTB or even cheapo flat scrapers. That long knife trim gives me the panic. 😂

Great to see someone take pride in their work. Professional results. I'm having my windshield replaced on my camaro by safelite next week here on the east coast. I hope the tech has the same attention to detail.

This is as professional as you can get! I'm having a windshield put in my Chrysler Town and country. It is a small locally owned glass company and they are supposed to fast and good! They are definitely earning their money!

Beautiful so beautiful ❤️ love how you care even when the car's not in the best condition you really made that car look beautiful again that paint is popping now all because of that windshield you installed so meticulously❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤

You do a really good job, I’m looking for a place to replace my windshield, I hope I find someone as good as you..

This is awesome, I hope when I get a windshield replacement tech he takes pride in his work like u, I just got a crack on my tacoma couple days ago and pissed me off royally, awesome job 👍🏽👍🏽

Making a hard job look easy! Keep it up!

Professional!! Awesome job. I have a 2016 RDX Acura that has to get a windshield replacement today. I'm using a company called pinnacle on Long Island New York. I had to go for aftermarket not OEM. Charging me $250 for install. I hope it's a name brand like PGW, pilkington, or AP tech.

Super Job! 👍🏻

The perfect profession for Colorado everybody has a broken windshield😊

Not bad at all, I personally don’t use that much premier but to each their own. Good Job on it. And I don’t see many people throwing it in V too! Nice!

Awsome just looking to see if I can remove a good window and just replace the glue it’s not the same when you care for the window thanks for your vid

I liked the professional service, not those gambiarras that some silly guys do as a joke and teach you wrong, congratulations, I finally learned the right thing, how it's done, thank you.

Great video. Which mastic do you advice for this job? Specially for DIY.

ok so now i ll do the same by myself thank you

Dope job and video 💯

Proper prep and install 🤝 Getting training atm from a 16+ years expert!

Fantastic only took 4 minutes

Great job, Bro. 🥰🫶🏻🥰

It’s that easy damn.

Nice work! 🤙

Great work

Nice replacement! Have you tried the btb or the wrd urethane trim tool? A lot easier in my opinion. Less scratches too.

Nicely done. Would love to know what all those tools and sprays in each step used are called :D

On my 1970 nova all the channels are new bare metal. Should I leave it bare before painting the whole car for you to prime or you want the car painted 1st then you sand and prime/install?

for what is the blue tape for? Nice video!

Hi. You did amazing job. I really want to learn how to install windshield. Is it possible to know what silicone and brand of tools your using?

That was a very common tool 4 to 5 years ago. The long blade. Don’t see them much anymore, but as long as you know what your doing it’s not going to scratch anything. A BTB or “ big red” can scratch just as easy with an untrained hand 👍.

You make this look easy. So what came first this or window cleaning? I find it interesting and am curious what it would take for a window cleaner to get into windshield replacement.

What’s your opinion of plexi glass windshields?

AWESOME

Definitely need a new windshield for my ol ford

Nice work!Why in my country isnt such people doing this job at home.🙄

so my hood lifted up and it smashed into my windshield. do u think that i should get the windshield replaced first?

Great super

Could you include a list of products you used?

Don't worry about cleaning the glass, what I want is a factory-like install.

Nice lil beat . I just wrecked on that beat with a lil 3 min freestyle 😂😎

Do you use a heater for the urethane or was the sun and asphalt sufficient enough? And do you notice much of a difference between laying the urethane on the pinch weld vs the windshield like a lot of installers preach? About to do my first windshield. Trying to make sure I don’t need to do it twice 😂

So, I have this weird plastic/rubber/metal trim around my windshield that was adhered on. It doesn’t pull away like that car did. Any tips to get this off ?

I’m hesitant to have my windshield replaced in my Tacoma because I’m afraid someone will gouge the frame and in a few years I will have rust bleeding out of it.

Mike: I have a brand new Mazda 2023 4 door 3 sedan sport, under lease, I noticed the last day or so that I somehow had road or rock damage, or deliberate damage, with hairline cracking or chipping rather, in various spots on the windshield. It almost looks like the wipers did some damage too, on the lines of the wiper arcs, but I don't see how since the vehicle is not a month old or so. Also, how do you replace Mazda windshield since the upper center interior of it has that large plastic rearview mirror/seatbelt alarms etc. electronics module seated on it? Is that removable like the mirror, easily? I have no idea. I'm bringing the car in tomorrow to my dealer and praying they can just replace the windshield. The chipping isn't the worst ever but it's already noticeable and marring the view a bit. I was super pissed off. Also my street has been ripped up the past two days and then Monday again, for repaving! So all kinds of rocks and shit has been thrown up for days here. Really great when you just took delivery of a new car! Are road damage or deliberate damage usually covered by the dealer on a new leased car? I know most repairs or defects are, minus tire wear and tear. I've never had cracks or chips so bad before I had to have repaired, ever. And again, this car is a month old. The scratches and chipping are surface, not deep.

I work for a commercial glass company (strorefront/curtainwall mainly). I am an estimator (read plans and bid jobs in the office) and I run the fabication in the shop. I installed for a year or so and have a couple years of experience with replacing door lites and side lites and wet glazing glass into different systems. With that said.....should I save a few hundred and order the glass myself and do the work myself? I know i will have to buy a few things I'm sure, however if I just have glass cost basically and my own labor is it worth it for me to do the work. I love to save money and my dedctible is 750 and safelite wants $500. I can get the glass for $250 i believe. Also I wouldnt mind having a little side gig since the company i work for doesnt offer it they wouldnt care what I do from home.

I’m wanting to get into this, but unfortunately no one around me wants it to teach me bc I’d be the competition. Any advice? Would you be willing to sell me a couple of in depth how to vids??

Brother you gotta list your tools for the job !

I do glass repair everyday, i know and appreciate good effort, but i also know scratches when i see them, it may take a few extra minutes but have you ever considered a push blade ? Good work though man, not easy doing an install un-aided.

Broad question but i havent done or had training for a windshield install and im planning on finishing up the install on my s10 would the hardest part about the install be the beading and correct hieght of the urethane ? And also in what situation would i need to use glass/urethane primer under the urethane ?

mind share all the tools, glues and cleaning liquid information?

wish I could do this and save money...im paying 350.00 to get my windsheild replaced today...thanks for showing how its done.... how long did it take you ?

Dam I feel like the last guy to see your content. Wonderful videos. Do you have a link for the suction tool you used @ 3:15 ? Do you have a link for it ??

I need these tools Can you rent any of these or could you provide a detailed list please

My Audi a4 cabriolet back glass cloth got loose Can I fix that Do you have any suggestions like rino glue

Hi,what will bond rubber to glass,will the windscreen bond and primer work for this also ?

What about replacing the rubber beading around the windshield for waterproofing?

Question, why do you use the two handed cold knife handle over the red U shaped handle? And benefits ?

Can you share a tool list? Thanks ❤

When the windshield is worth more than the whole car

what's the power tool called that you used to scrape the urethane inside the car?

Do u notice the vin number plate under the windshield is acessible on every car?

I just saved myself 150 bucks!

What is the name of that machine for opening the windshield

Do you prefer using 08693 or 08609 for adhesive?

Do you have the list of tools you had used to replace the windshield?

Hey. Got a. (?) Why would you cover interior seat covers ,fenders and dashboard just to replace windshield .when it seems like a jacked top ride with a old clunker dirtyass engine from a local junkyard

What about calibrating it afterwards how does that work

Do you put the molding back on ?

No rust treatment?

Somehow I feel sorry for the new windshield

His trying to look so professional with this car,

Damn, i still can't get to how to remove kia pro ceed 2008 molding around windshield... Ugh

Nice work. But mute it the music get a bit annoying 😶

Shit made me feel better about my crack goddamn 😭 what happened

What’s something like this cost?

Such a nice brand new windshield like this, you might as well replace the car 😂 it looks a little bit off😂

How much is a Toyota 4runner front glass for sale?

Materials list please

01:58 what machine that. Where can i buy 1

No pressure to seal

Product list?

Except the motor of the Tesla Y, the car is built kind of flimsy. I just bought a 2023 Tesla Model Y and the paint in the front chips easily and within 4 months my wind shield cracked. A tiny pen needle size chip (just think of a tip of a ball point pen) created a crack across the wind shield. There’s probably too much pressure when assembled. I wanted this car for awhile now and after getting it. It’s just ok. Just don’t believe the hype about the car. I think many believers of Tesla might over look it’s flaws and not tell you the truth about this car. I’m telling you you’ll probably have many issues with your car and pay good money because it’s not covered by their warranty before you get all the kinks and flaws out of your car. Tesla needs to do better in building their cars

0:49 wtf happened to that hood? 😱😱😱

Looks like that Camry has had a hard life 😢

what's the song name?

kto ogląda po wypadku? :D

Easy money

🚗🛏️? 😭

I love how he put Fender protectors on such a crappy car

Yay now I can do this with my car for $120 at home instead of $800 in a shop

Kind of wish you would speak and get instruction instead of just showing us how to do it

🤦🤦🤦🤦🤦 Stop ! Don't touch my car !