Easy Zigbee2MQTT Dongle Migration - Sonoff USB to SLZB-06 Ethernet
Рет қаралды 4,912
Күн бұрынHow to Switch Zigbee Radios in #zigbee2mqtt - Zigbee SMLight SLZB-06 - s.click.aliexpress.com/e/_DBW... 🔴pick SLZB-06 - also from cloudfree.shop/product/smligh...
Amazon Affiliate SLZB-06 - amzn.to/4brdxbS
z-stack firmware - github.com/Koenkk/Z-Stack-fir...
cc2538-bsl - github.com/JelmerT/cc2538-bsl
command:
cc2538-bsl.py -evw --ieee-address 00:12:4b:00:24:c2:77:9f -p COM8 CC1352P2_CC2652P_other_coordinator_20240315.hex
⚡Products We Use/Recommend
Amazon US - amzn.to/2YZNDeO
Amazon UK - amzn.to/2TnG2R4
Amazon CA - amzn.to/2JWsNq5
⚡Be Social!⚡
Main Website - www.digiblur.com
Discord Chat - discord.digiblur.com
Patreon - patreon.digiblur.com
Join / @digiblurdiy
Facebook - facebook.digiblur.com
Instagram - instagram.digiblur.com
Please note, the product links above could be affiliate links, using them could earn digiblurDIY a small commission of most purchases and helps with future video projects. Thank you!
00:00 Intro & The Why?
02:22 Migrate from USB to POE Adapter
15:24 USB to USB IEEE Clone - Python
25:22 Migrate my Real Zigbee Network!
28:34 Closing Thoughts
@raven325i 2 күн бұрын
Thanks. Always wanted to migrate to the SLZB-06 but was hesitant (and lazy) to dive into how. I didnt relish the thought I migrating 55 zigbee devices. After watching your video and seen how easy it was I, bought the SLZB and migrated over without too much issue. Only thing I found was that notwithstanding I changed in the address in the configuration portion of Zigbee2Mqtt in HA, I had to also manually edit the yaml file with same new address, as it was still pointing to the old coordinator (Zonoff) address. Changed this and bingo everything up and running. Beauty of using the POE is I can now place that coordinator in a more 'central' location which isnt necessarily tied to the server like my old USB zigbee coordinator. Thanks once again! Super easy.
@digiblurDIY 11 сағат бұрын
Nice!! Thanks for the feedback on a decent sized zigbee network migration.
@raven325i 6 сағат бұрын
@@digiblurDIY yes thanks once again. I just have being recommended view of other YT videos on the same subject and they are going through the repair process. OMG I would never have migrated if I saw those videos ;=P
@nongsung 7 күн бұрын
Super video! From Sonoff USB to POE (slzb-06) with 80 devices without a single problem. Prepared the slzb-06 (IEEE, firmware updates & fixed IP), stopped the z2m container, removed the usb device from portainer stack, replaced the serial from the configuration.yaml and redeployed the container. All devices were online within a minute. No power down, no re-pairing necessary. Thanks! BTW slowly the LQI is improving since the POE adapter is in a completely different place.
@digiblurDIY 4 күн бұрын
Awesome work!! Great to hear it worked out for you with that many devices!
@nongsung 4 күн бұрын
@@digiblurDIY well… after 3 days things went sour (nothing worked, out of the blue) either a power problem (installed a UPS), a router problem (installed new power supplies) or a firmware problem. Shut all down for about 45 minutes and it is now rebuilding the mesh network. Hope I don’t have to go back to Sonoff USB because tomorrow 10 new zigbee lights will arrive..
@JesseG2573 3 күн бұрын
I asked and you delivered (as always).... Seems simple enough, but then again you always make it look like a walk in the park. Great video Travis, thanks for increasing our confidence. Just ordered it - hopefully I won't need the discord chat for this...
@JesseG2573 Күн бұрын
Well, I followed this video and migrated 56 devices over just fine. Had to wake a few. Its up and running. Thanks again Travis.
@digiblurDIY 11 сағат бұрын
NICE! Glad to hear you had success!
@kgaugeloseoka3018 12 күн бұрын
Another great video. Just when I am about to receive my first SLZB-06. Without seeing this video I was going start everything from scatch. Thank you Travis. Keep up the good work.
@digiblurDIY 10 күн бұрын
Awesome timing!!
@sikend6674 4 күн бұрын
Wanted to migrate for awhile, but we have Zigbee devices (around 110) all over the property. all the videos I had found up to this point said they all needed to be repaired once it was installed. That wasn't going to work as over half of those would require a ladder to get to. Thank you for this video, I ordered a dongle as soon as I finished watching this and fingers crossed, will be attempting this when it arrives!
@digiblurDIY 4 күн бұрын
What radio are you using right now?
@michaelmarks25 12 күн бұрын
Ha. was just looking for this. Fricken awesome. Thank you
@digiblurDIY 12 күн бұрын
Glad to help!
@JohnDoe1999-lg7mh 12 күн бұрын
Thanks for the video. IEEE, just say, I triple E. I plan on replacing my sonoff USB with the SMLight unit. Currently creating a document to follow so that it goes smoother. I currently have an SMLight running as a router and bought a second unit that will replace the SONOFF. I have HA running on HA blue. I self host MQTT, Z2M, Node-red, influxdb and ESPHome as LXC running on Proxmox. I like to have other features still running when HA is rebooting and I have more control. I still need to migrate ESPHome device that are talking to ESPHome with the Add-on on HA.
@digiblurDIY 12 күн бұрын
Pretty simple to migrate Esphome, copy the yaml files and done as it isn't really in between HA and the ESP devices, it is more of a compile/upgrade tool.
@JohnDoe1999-lg7mh 11 күн бұрын
@@digiblurDIY Thanks. Just to find the time to do it. So, many other projects on the go. What else is new.
@Tntdruid 12 күн бұрын
I'm using 1 in my summerhouse and connecting via wireguard back home, works great 👍
@digiblurDIY 12 күн бұрын
I still want to set one up at a family members house.
@Tntdruid 12 күн бұрын
@@digiblurDIY Do it 👍
@loganboyd 12 күн бұрын
I've always use "Eye Triple EE" for IEEE
@bobroszkowski 12 күн бұрын
Another great video. I do have a couple questions. I run HA at my house and my folks live across the street. I do have a 5.8ghz link between the houses providing network and Internet connectivity. I am currently running the Sonoff bridge at each house and run Z2M and ZHA. I would like to consolidate everything into one interface. With the SLZB06, I can run the coordinator at the main house and the router at the second house. Does the router communicate through the network or over RF back to the coordinator? The houses are far enough apart where connectivity becomes spotty. I am currently using the Sonoff Bridge Pro at both locations and each one is a coordinator. Is it possible to reconfigure one of these to be a router like the SLZB06?
@digiblurDIY 12 күн бұрын
You would need to get a Zigbee route going between two Zigbee devices between the two houses. That might be possible with 2 Zigbee routers with panel antennas. I've done it across the neighborhood before. But in the sake or reliability, if your 5.8ghz link is solid. I'd just run two SLZB-06 with two Z2M instances myself. You can't have zigbee use the wifi link between routers, that's a Thread feature though.
@mareckorlicki6334 12 күн бұрын
hi Great vid I have a Tubes ethernet POE running ZHA, I have just received my SLZB-06 If I set this up as Z2MQTT is it possible to migrate my ZHA devices over easily or will I have to repair everything
@digiblurDIY 10 күн бұрын
Not that I know of unfortunately. I haven't seen any migration tool from ZHA to Z2M.
@andyjayh 12 күн бұрын
Wish this video was available last weekend when I decided to migrate mine. Z2m on UnRaid also and tried editing the Docker file to change the port as opposed to within z2m as you did here. Didn’t like it and z2m had a major fail. Only way I could get it to start again was remove the .yaml file and let it build a new one. 80 devices to reconnect… took to opportunity to change the channel at this point also. That was a painful weekend but at least it’s back up and working well.
@digiblurDIY 12 күн бұрын
That is one point I had fail on me today. I forgot to remove the pass through and the container wouldn't restart. Doh! The usb was missing now.
@andyjayh 12 күн бұрын
@@digiblurDIY I would like to try it again in a lab to understand what went wrong with mine as I’m sure it should have been much easier. Still got there in the end thanks to your videos on the subject and I think once using the Ethernet device, it’s actually much simpler than the USB.
@george_gav24 12 күн бұрын
Thanks for the video, should be getting a slzb-06 from aexpress in a few weeks, just to expand my network, while it seems straight forward to add another coordinator to z2mqtt, how do i prevent multiple coordinators fighting over devices while pairing, as there is going to be some overlap
@digiblurDIY 12 күн бұрын
Why are you adding another coordinator? Do you just mean to add it as router mode?
@george_gav24 12 күн бұрын
@@digiblurDIYhave a usb coordinator in the living room, garage is totally out of range, so my plan is to have one usb and one poe, could also run amother z2mqtt in docker which seems more practical
@TristynRusselo 12 күн бұрын
I also run HA-core on my Threadripper based UNRAID server. I have been considering migrating my HA from UNRAID to a HA Green, as I dont like HA being offline when I have server maintenance or server issues. I know I can still have my heavy hitting (but less important) dockers run on UNRAID and point HA Green at them.... but am still worried Green will be less responsive. Thoughts?
@digiblurDIY 12 күн бұрын
HA Green is too slow for my likes. N95/N100 is my choice for a little HA box.
@Mr.AjmalSafi 12 күн бұрын
Do I need to perform the same steps if I am going from SLZB-06 to SLZB-06p7. I have to write the IEEE-address from SLZB-06 to SLZB-06p7 right?
@digiblurDIY 10 күн бұрын
Yup, I would as devices will be looking for the other IEEE address.
@4sayken 12 күн бұрын
When are we going to get another live Travis? 😅
@digiblurDIY 12 күн бұрын
Tonight actually.. 8pm central time or so.
@craigsamuels7895 5 күн бұрын
I am currently running firmware v2.3.6 but still haven't got the option of changing the EEE on my SLZB-06M. Can you please help with this problem and how to fix it ?
@digiblurDIY 5 күн бұрын
That's only available on that TI model ones. That's the EFR chipset you have.
@TristynRusselo 12 күн бұрын
Windows now has clipboard history. WIndows key + V (instead of Ctrl + V)
@digiblurDIY 12 күн бұрын
I always forget about that combo.
@djashjones 12 күн бұрын
It's pronounced as "I triple E".
@digiblurDIY 12 күн бұрын
I would probably screw that one up too end up calling it triple B.
@Bruno-vz8vk 10 күн бұрын
I have a sonoff dongle and want to migrate to SLZB-06M Who's silicon lab chip... Would it work?
@digiblurDIY 9 күн бұрын
Migrate from what to what on what software?
@Bruno-vz8vk 9 күн бұрын
@@digiblurDIY from zigbee2mqtt on home assistant with sonof dongle to zigbee2mqtt on home assistant with slzb-06m plugged on poe
@waynenocton 12 күн бұрын
I’ve been having all kinds of issues with Zigbee2MQTT, seems like usually after a Home Assistant update, a few to several devices just stop working, no idea why. I have found that if I go into the add on and rename the device, I usually just add a 1, then move the slider that says Update entity ID, then do it again but remove the 1 and normally it starts working again. Anyone else having these issues? I’m having it on several completely separate installs too.
@digiblurDIY 10 күн бұрын
What MQTT container are you using and version?
@waynenocton 10 күн бұрын
@@digiblurDIY supervised.
@cameronottosen8376 9 күн бұрын
Has anyone attempted to enable to bluetooth proxy feature on this unit while running Z2M?
@digiblurDIY 9 күн бұрын
I haven't tried it yet with the Esphome software
@Neemelaid 2 күн бұрын
And there is no way doing it in SLZB-06M ? Everywhere is recomending "buy 06M version" But nowhere is any informatsion how to go ember firmware or how to go from SONOFF USB Dongle to SLZB-06M with mqtt
@digiblurDIY 2 күн бұрын
I wouldn't get the 6M myself, everywhere hasn't done their research.
@Neemelaid Күн бұрын
@@digiblurDIY why not? any specific reason?
@digiblurDIY Күн бұрын
I would assume that most of them run HAOS boxes and just use ZHA as Z2M might be too confusing combined with it using mqtt that oddly offends people to install it. So they stick to what is hyped and pushed regardless of reliability or performance.
@pappyman179 12 күн бұрын
Just FYI, it's pronounced eye-tripple-eee.
@pappyman179 12 күн бұрын
Also, the IEEE address looks suspiciously like a 48 bit (6 byte) MAC address, where the colons denote 8-bit (1 byte) boundaries. en.wikipedia.org/wiki/MAC_address www.computernetworkingnotes.com/ccna-study-guide/mac-address-or-ethernet-addressing-explained.html
@jmr 12 күн бұрын
Had the power flick off and on five times and it reset a bunch of my smart bulbs. Stupid power company. 😢
@digiblurDIY 12 күн бұрын
I wish my Generac was designed where if the power dropped it just disconnected it. Waited for the generator to start and come up then flip us over. Then start a timer where the power had to be constant for a solid 15 min before it dropped us back on the grid.
@jmr 12 күн бұрын
@@digiblurDIY That would be nice. I have flipped my breakers off because the power was off and on too much.
@byehl 12 күн бұрын
Sigh. I desperately need an easy path for migrating TI to Silicon Labs.
@digiblurDIY 12 күн бұрын
That's an odd path... I think ZHA might be able to do it.
@byehl 12 күн бұрын
Is it really odd tho? Nabu Casa decided to use SL chips in their hardware for whatever reasons, while TI has long been the "preferred" choice. Definitely my bad for buying the SLZB-06M knowing there was no solution for migrating in z2m.
@digiblurDIY 12 күн бұрын
I prefer the TI chipsets myself given they just have better compatibility with Z2M. I can see HA going the SL route though given their focus is ZHA. Not to really say one chip is better than the other, if I was using ZHA then I would probably go SL as well.
digiblur DIY
Рет қаралды 10 М.
Andreas Spiess
Рет қаралды 36 М.
Tomaž Zaman
Рет қаралды 1,2 МЛН