EasyEDA PCB design and order from JLCPCB

Рет қаралды 32,795

Electronics Old and New by M Caldeira

Күн бұрын

#diyelectronics #diyaudio EasyEDA PCB design and order from JLCPCB
PCB Prototype for $2 (Any Color ): jlcpcb.com/
I generally install bluetooth modules into the tube radios that I restore. These are very useful, but making the necessary isolated power supply can be a chore using diy methods.
I decided that I needed to get a professional PCB made, and with the option presented here, it couldn't be simpler.
The price is also ridiculously low, so prototyping becomes a real option for the hobbyist.
You can now support the channel:
/ mcaldeira paypal.me/macaldeira
• Zener Diode Tester - P...
RESTORATION BUILDING BLOCKS: A series of videos showing detailed steps used the restoration process of tube equipment:
• How to safely check th...
HowTo's: Various videos on some simple techniques and projects:
• Extend tube radio FM b...
See also playlists on some other completed restoration projects.
PHILIPS BX750A:
• Philips BX750A tube ra...
TELEFUNKEN OPUS 2114:
• Telefunken Opus 2114 s...
SABA UW-175-Z 3D:
• Saba UW 175-Z 3D tube ...
GRUNDIG 1070:
• Grundig 1070 tube radi...
SCHAUB-LORENZ GOLDY 58 type 3020:
• Schaub-Lorenz Goldy 58...
BUSH VHF64:
• Bush VHF64 tube radio ...
GRUNDIG 3060A:
• Grundig 3060a tube rad...
TELEFUNKEN OPERETTE 8:
• Telefunken Operette 8 ...
GRAETZ SUPER 171W:
• Graetz Super 171W tube...
LOEWE-OPTA MAGNET 3737W:
• Loewe-Opta Magnet 3737...
BRAUN ATELIER 3:
• Braun Atelier 3
LOEWE-OPTA TRUXA STEREO 4741W:
• Loewe-Opta Truxa Stere...
GRAETZ COMEDIA 616:
• Graetz Comedia 616 tub...
SABA FREIBURG W2:
• Saba Freiburg W2 (WII)...
GRAETZ MUSICA 4R417:
• Graetz Musica 4R417 re...
You may also be interested in ...
CAPACITOR LEAKAGE TESTER:
• Capacitor leakage test...

Пікірлер: 65

@allunread1358 4 жыл бұрын

Thank you for sharing this, really looking forward to seeing the boards that come back

@electronicsoldandnew 4 жыл бұрын

So am I :)

@andrewcottrill3248 4 жыл бұрын

Hi & thank you for the great video. Your restorations have inspired me to restore a vintage radio (haven't done one for a while)! Managed to get hold of a Wega 315 which should be a good project hopefully. I have also created and ordered my 1st PCB's from EasyEDA to add bluetooth. Took a couple of hours to get my head around the software, but soon got the hang of it and they are now being processed. Again many thanks for the videos - they are really interesting and helpful! Kind regards...

@electronicsoldandnew 4 жыл бұрын

My pleasure.

@gilbus4989 4 жыл бұрын

Awesome video- now I can try to make a gerber file for orders. Thanks

@phillipyannone3195 4 жыл бұрын

Very nice resource, thank you for sharing.

@electronicsoldandnew 4 жыл бұрын

You’re welcome

@poormanselectronicsbench2021 2 жыл бұрын

Ha! I'm just making a vid to post soon on using EasyEDA to make some updated driver(s) and a power board for a Dynaco ST-120 solid state amp. I've chosen to skip the schematic design part, mostly because since I have a schematic and don't need to SPICE model it, I just go to the PCB screen, place my components, run my tracks and Bob's your uncle. I've found the 3D view helps ( if you choose to add parts as a "footprint" and they have good 3D models, as you wil see the actual components) to make sure you don't have physical conflicts in parts, presuming you picked the right 3D model sizing. Running the DRC check and fixing any errors before creating a gerber file for board creation is a must as well. Good info, thanks for posting!

@electronicsoldandnew 2 жыл бұрын

👍

@miguelcalderon5841 4 жыл бұрын

Thank you...Greetings from Latin America

@electronicsoldandnew 4 жыл бұрын

Greetings 😊

@crocodiyle7541 4 жыл бұрын

This is a really great and inexpensive production of printed circuit boards. I think l'll try some of my projects too. By the way, My Nordmende Fidelio 65 is now requesting to have a bluetooth connection. These "old men" don't want to give up so easily, ha, ha. Thans Manuel!

@electronicsoldandnew 4 жыл бұрын

They sure don’t.

@alfredneumann4692 4 жыл бұрын

I didn't believe it. This EDA system is available for LINUX! Thanks for showing us this little demonstration. Time will come and i will see, if this works on my debian LINUX.

@electronicsoldandnew 4 жыл бұрын

Good luck. I’m really getting into it. A lot simpler than eagle.

@MadScienceHacksTV 3 жыл бұрын

Great tutorial Meneer!

@electronicsoldandnew 3 жыл бұрын

Dankie

@lanceeilers5061 4 жыл бұрын

I believe you can also have them do the assembly , keep up the good work , have a great one , best regards Lance

@UberWagen 4 жыл бұрын

Only if they have your components in stock in their library. If it's not in stock, they won't add it! lol

@electronicsoldandnew 4 жыл бұрын

Yes, they do, but as Calvin says, you must select from permissible components.

@johnlake6321 4 жыл бұрын

Great video - thank you. I'm wondering if you know how to define cut outs in the PCB boards? I have a transistor tester whose prototype I did on a strip board and I have a nifty enclosure for it that requires two half round cut outs. I've not found a solution yet.

@electronicsoldandnew 4 жыл бұрын

I believe you can draw the outline Of the board in any shape you want, not just the regular rectangle.

@knockingman7483 4 жыл бұрын

Thank you Sir, And where to order own a case design for pcb

@mikeyaudio167 4 жыл бұрын

Very nice en helpfull video :)

@electronicsoldandnew 4 жыл бұрын

Mikey Audio thanks

@bibinvarkey3041 Жыл бұрын

Can you do a 100 watt led mcpcb & led driver design aswell?

@resenator4280 4 жыл бұрын

I wonder how well this would work for making a PCB for the Mini Whip? I have been looking into building one.

@electronicsoldandnew 4 жыл бұрын

Should be just perfect.

@mikeberger1688 3 жыл бұрын

Using a simple SMD resistor, what does JLCPCB consider zero degree rotation? The part is vertical? And 90 is horizontal? Or ?

@sahalasolusiindustri 3 жыл бұрын

Awesome. please make Power Supply 110/220Vac to 12Vdc.Thank you

@leifclaesson2470 4 жыл бұрын

Thanks for sharing, but why would you pause the recording during the PCB layout portion? That was the part I needed :-/

@electronicsoldandnew 4 жыл бұрын

Sorry about that. I wanted to speed up the video ad it was getting very long. There’ll be more.

@cooliocrib4409 4 жыл бұрын

Can you make custom footprint for ics you will not have in your catalogue? For eg GAN transistor?

@electronicsoldandnew 4 жыл бұрын

Yes, you can. There are quite a few tutorials on KZfaq to create custom components.

@MrPnew1 4 жыл бұрын

I have used JLPCB but just note that this cheap price is only for your first order. The price goes up quite significantly for any orders after the first. OSH Park is also very cheap for multiples of three boards oshpark.com/ note that you will be submitting Eagle board files here and it has no circuit design software like JLPCB does

@mikeyz8775 3 жыл бұрын

Can jlcpcb make single board like computers? Can you give advice on how a person might order a custom pi like board with less or more components added to sufice the build requirments?

@electronicsoldandnew 3 жыл бұрын

You’ll have to design the board completely first.

@georgewabule8230 3 жыл бұрын

Sir doing a good job but wish to understand something, are PCBs designated to speak the language of the gadgets or any PCB designed can be OK for radios as well as for decodes or PCBs for computers can be good broadcasting panels?

@electronicsoldandnew 3 жыл бұрын

Not sure I understand the question. Sorry.

@carolineh2328 Жыл бұрын

How would you do the same starting with a 9VDC power source - if I’m doing this correctly, I’m getting 9VDC from my bulb in my tube radio

@electronicsoldandnew Жыл бұрын

You can just bypass the diode rectifier and connect across the filer capacitor.

@carolineh2328 Жыл бұрын

@@electronicsoldandnewthank you! Was also learning about zener diodes… the board just arrived… what do you recommend? Adding a zener diode and resistor or just bypassing the rectifier. Will use the other boards for 6.3volt input…

@electronicsoldandnew Жыл бұрын

I’d use the board as it is with the voltage regulator, and only skip the rectifier diodes.

@carolineh2328 Жыл бұрын

@@electronicsoldandnew thank you for your quick responses and help. I’m super new to everything, but have learned quite a lot. Recapping tube radios and adding Bluetooth to some.

@vimaljks 4 жыл бұрын

Hi how do I put all my silkscreen on bottom of PCB than on the top? So I can send for manufacturing.

@electronicsoldandnew 4 жыл бұрын

The silkscreen is placed on the correct layer as per the layout of the component. If you want to change it, you need to move it to the chosen layer in the software.

@vimaljks 4 жыл бұрын

@@electronicsoldandnew hi OK I'll have ago but thanks for responding cheers.

@januszsikora7689 3 жыл бұрын

Excellent tutorial. I am assuming this is your own design. Is it copy righted? I would like to make similar PCB for my own use, non commercial, however I do respect copy rights and do not want to infringe on yours if that's the case.

@electronicsoldandnew 3 жыл бұрын

You can use those designs as you wish. I have no problem with that.

@januszsikora7689 3 жыл бұрын

@@electronicsoldandnew Thanks

@billleonard2015 4 жыл бұрын

You skipped a lot. I would like to have seen you placing a few components to get the traces the way you wanted (not all of them but, say, three or four). How did you get multiple trace thicknesses and how did you decide which thicknesses? Were you able to adjust the paths?

@electronicsoldandnew 4 жыл бұрын

I do the layout manually and decide on track width using some experience.

@Not-Only-Reaper-Tutorials 3 жыл бұрын

on EasyEDA, component placement should be better developed. In complex circuitry, it's now quite cumbersome.

@cooliocrib4409 4 жыл бұрын

What is the estimated delivery date to the UK?

@electronicsoldandnew 4 жыл бұрын

No idea, but it’ll be much faster than to Madeira, I’m sure.

@deepal2954 4 жыл бұрын

please give an idea to install the file in my ubuntu OS laptop

@electronicsoldandnew 4 жыл бұрын

Don’t know the Ubuntu system. Sorry.

@gokulvijayan5596 4 жыл бұрын

Just go to easy eda web page and checkout for ur Linux

@koushikpramanik3716 4 жыл бұрын

jlcpcb me india me delivery charge 5.80 doller dikha raha hai.

@marcolokker911 3 жыл бұрын

WARNING JLCPCB has a very very bad service, i have order in total 5 project and only recieved 3 of those, the 2 missing NO REFUND ANDNO HELP solving it thay just say just reorder it (with again paying for it)