Hi! I did it!!! I don't think I'd have attempted dismantling my laptop had it not been for you and this video, so I want to say THANK YOU!!!! You gave me the confidence I needed to plunge into this very difficult job. And, now my laptop is working nearly as well as it did when I first bought it. I simply can't thank you enough. In fact, the reason that I chose to use your video to help me through this is that I have the exact same computer (Pavilion dv6-6c10us), and this is the only video that shows exactly how to dismantle THIS computer. Having gone through the job, using your video as a coach (I used my husband's computer and played the video, pausing it as I completed each step), there are some observations and questions I have, as well as some suggestions for other folks like me, who'd like to tackle this job and save themselves upwards of $125 or even $150 to have someone else do it. 1. First, I suggest that people watch the whole video from beginning to end to understand what you'll be doing and what you'll need to have handy. Some things I found to have handy were: an assortment of small phillips and flat-head screwdrivers (it was immensely helpful to magnetize the tip of the phillips-head screwdriver by running across a magnet in one direction; apparently, it's magnetized just enough to hold the screw but not enough to mess with the components); a pad and pencil to write down everything you do in the order you do it, like leaving a trail of breadcrumbs for the return trip; an assortment of small containers, like small dixie cups, bowls, coasters, or even an egg carton to hold the various screws from the various places and a way to label the containers; a clear head; plenty of time; and a shot or two of whisky (just kidding about the last one). Also, a strong light (like a halogen), a loupe for seeing small things, a comfortable and uncluttered work space, and relaxing music. :-) 2. I noticed that you were VERY thorough in explaining some things, but other things you did off-camera, and I really had no idea how to do them. For example, when taking out the hard drive, I had to remove the four screws that secure the hard drive itself in its carrier and take it out of the carrier before I was able to disconnect the cable. I didn't know that, and it took me a while to sort that out. There were several other things like that. Sometimes you'd indicate that something needed to be done, but you'd have done it already off camera, and so there was no way to know HOW to do that thing. I wonder if in future videos, rather than doing parts of the job off-camera, you might consider just speeding up the segments so that a person can potentially see everything you're doing and can perhaps pause or slow down the segments themselves to see what's involved in what you're doing. That would have been enormously helpful to me! 3. When it comes to cleaning the actual fan, you mentioned that your fan blades didn't look too dirty and so there was no need to open the housing and clean inside. My fan blades didn't look too dirty, either, but I'm glad I went ahead and opened it up, because there was a LOT of dust up against the fins of the heat sink that didn't even come out with blowing backward into the fins from outside. The only way I'd have known about that dust (and would have been able to clear it) was by dismantling the fan housing itself. I recommend to anyone whose computer is overheating and running loudly, if you're going to go as far as dismantling your laptop to deal with the problem, take the extra step and dismantle the fan housing, too, even if the fan blades don't look so bad. There's dust in there you won't see until you open up the housing. 4. Finally, here's my big question. :-) Your excellent coaching only went so far as taking apart the computer, but we're pretty much left alone to put the thing back together ourselves, and that was not the easiest thing to do. In fact, I had gotten it all back together, but it wouldn't turn on, so I had to take it all apart again and re-reassemble it. The second time was the charm ~ all except the touchpad, which is no longer working. It's not the end of the world because I don't use the touchpad all that much, and I happen to have a USB touchpad that is working fine. I'm in no mood to open the computer up again so soon, but I guess I will at some point in the near future, and I wonder if you could tell me what I missed. I obviously disconnected the touchpad, or it somehow got disconnected, and I don't know what to look for to reconnect it. Could you tell me? How far will I have to go in the dismantling process before I can reconnect my touchpad? And, how exactly do I do that? Again, I want to thank you from the bottom of my heart for all your kind help and encouragement. My computer is as quiet as a ... well, I hate to say it, but "mouse," it's working nearly perfectly, processing quickly, quietly, and efficiently; it's practically like new, and you're the reason why! With gratitude and kindest regards, Marji

Thanks for instructional overview to repair my dv6. This is the second time I've had problem over 5 years. Now I can repair myself without warranty.

Thanks very much my 5 year old dv6 is almost back to its old self. remarkable! never done anything like this before! had to go back in a couple of times to fix some minor quirks - my mistakes not you'res at all. heating has gone from 80s / 90s back to 50s/60s. you're a legend.... !!!!! thanks for helping us all.

Never opened a computer in my life before this! Followed the video carefully to clean my fan... and now it doesn't sound like shit anymore! BIG THANK YOU!!! Great tutorial!!!

*VERY IMPORTANT* : at 9:52 before you remove mobo you must loosen the HDD and CD cables. Pay special attention to how they were so that you can position them back later. Also there are two screws holding the the fan (and mobo) to the body which you have to remove. Unfortunately this tutorial is incomplete and the user risks *damage* without these steps so it it would be nice place these tips as annotation in the video. Also at 6:12 you forgot to show us that we must undo three more small ribbon cables. Also at 9:35 you forgot to tell us that we must remove four screws in the battery bay to remove this silver panel (which is necessary to remove the mobo).

Finally a guy who actually tells you how to disable a hp envy thanks man :D

Excellent instructional video! I found a DV6 the same as this one in the rubbish with the ram and HDD removed. Added these parts and a fresh install of Win7, it comes up with the overheating warning. Thanks to this video, I can buy a new fan and battery and should have a great new machine. Cheers!!

Really good instructions (with the add ons below). Putting new grease on helps well, but still need to power down the CPU to reduce the heat load and fan speed further. Anyway, before that video I could not have imagined to disassemble and reassemble a LapTop. And ALL worked immediately after switching it on again. THANK YOU very much!

Thank You! Just what I needed - a nice, easy tutorial.

Thanks for this video! Helped me to do the fix you showed and now my DV6 runs much cooler and quieter!

Thank you so much, I could always disassemble it up to where the motherboard was exposed, but I had no idea you had to disconnect the wireless card to actually release it! This is a really simple and useful video ^^

really concise, explanatory tutorial! thanks you made it very easy and simple to understand for newbies like me!

Hi Easy Steps, I followed your guide and I was able to resolve the loud fan fix immediately. Thanks so much for your help!

Thanks very much for the video. I have now stripped my dv6 down and cleaned the fan out!

Thanks a lot, it really helped me a lot. especially the one opening the fan, i found lot of dirt neat the exhaust which is completely blocking the air to go out.

you explain things so even i can understand! thank you so much. thank u for linking the compound also! i do wish i saw u put it back together! but thank u!

Thanks Ivan your video was great ! I thought I was going to have a mess on the bench but you made it look easy. Thanks again

Very well done, easy to follow each step. Thanks a bunch!!

Thanks for sharing easy steps. Very helpful and kinda fun! No one knows everything but working together we solve all kinds of problems so carry on dude!

Thanks a lot for sharing!!! I think your contribution is very instructive and useful. I own the same laptop computer and thanks to your video now I know how to fix the "fan problem" I notice every time I use it. Thanks!!!

Great video that helped me alot! I actually stopped when i got to the point I could see the fan and just sprayed it with some air. Cleaned it out enough. The keyboard was tough but i got it and used a credit card to seperate the frame. I made sure i kept track of where the screws went. Next its trying out your chicken leg recipe! Thank you my friend!

Just followed your instructions on my identical laptop. Many thanks for that. Its all fixed now.

Thank You!!! My laptop is waaaay better now! Thanks a Bunch!!!!!!!!!!!!

I love vids where you talk us through the videos. No offense to videos with just music playing but talking through the process makes me comfortable doing this. It's like you in the room with me walking me through it.

Thanks for the tutorial. It was inspirational and gave me the confidence to replace the cooling fan and grease the CPU.

Hey dude, thanks for the Vid. Helped heaps and made a difference to my notebook. To anyone else out there having the same troubles, it seems HP's fan software is terrible. I downloaded some freeware fan management program called 'Speed Fan' and my computer does not even get beyond warm now.

Thank you very much..! This was very helpful for me :)

the instruction was clear... Thank you very much

I'm not very computer savvy but managed to disassemble and clean with this video, thanks mate!

thanks you save my day best wishes from Warsaw the capital of Poland

This is the best video I’ve found! Thank you so much ❤

Good video pal, would have been nice to see the rebuild done step by step also. I know it's pretty much straightforward, as in just the reverse procedure, but it's always good to be able to see someone else do it. Just makes it easier. Thanks though bud, much appreciated :-)

Works fine on HP Envy. Great, excellent, TKS, best regards...

Great tutorial. Just what i was looking for.

I really like the way you show every step

thank god a video that actually shows what is and how to do the steps.. thanks.. been watching others.. they really suck.. I'm almost 100% apart.. i think this will be finished tomorrow.. doh.. thank you.

Perfect... tanks for video instructions!!

Thank you very much. Best video on YT. Good commentary, good explanation, whosoever was recording the video, did a great job. I liked your video and gave you a thumbs up. Excellent instructional video.

Good job on the video. Thanks. At 1:45 in the video you talk about using your nails to remove the lid above the disk drive. However, the dv6 has a latch release to perform the lid release. If you move the battery release lever in the opposite direction, it will pop open that lid.

Thanks for the video. It was really helpful

Thank you very much. You are the best!!

Thanks Easy Steps, I will give it a go and see what will happen.

Thank you very much for this video!

So many screws on the HP, it's crazy, I have a Dell too and it's so much easier. Thank you for the video sir. Very good tutorial.

You sir did a Super job; I have the same laptop and 'HAD' the same issues. Fixed my issue; I'm a subscriber!

Nice. You took your time to explain very well. Great job

Thank you very much for video guide, it really helps.

So HP persists in putting a thermal paste that dries out over time. Worked for me. Thank you ! (I used Arctic silver MX-4)

Great tutorial man.

Hi, first of all, cograts, this is a nice easy step by step tutorial, I wanted to know what was the software you use to monitoring the laptop temperature?

Sir this is a great video! Thank you ver much.

This is just what I needed for my AMD budget laptop processor upgrade! I wasn't too sure if this computer has removable CPU from the last time I opened mines, but now I know it does! I actually did some cooling mods for this computer. This laptops cooling design utilizes cool air by sucking air through the tight spaces from the 3 vents on the bottom, and cooling down a large section of the computer. The problem with this design is that there is not enough air to cool down the processor, let alone the GPU which makes it worse in higher spec laptops. There is no direct cooling for the heat sinks near the fan so its less effective. In addition, HP puts dust screens on those intake vents which suffocates it more and increases more heat, and prematurely drys off of the thermal paste. Since you can already have the skills to open and clean this laptop, I suggest you to remove the dust screen vents if you don't mind dust cleaning with a air spray periodically. You can also cut out the exhaust vents on the plastic chassis so all that heat doesn't circulate back into the cooling system through the casing itself and block external air flow. I find that cutting the plastic vent grills cuts down the noise down close a whisper on max load. I also find that without the grills, it cut about 2-3 Celsius off in my experience. My most recent extreme cooling mod was drilling a nickle to dime size hole right on the laptops chassis, right below the fan vents so it sucks in fresh cool air towards the heat sinks. All together, my stock max temps of 165-170F improve to an average 148F.

Excellent presentation. Finger nails are the best tools if you have them. You might want to caution novices how best to track the return of all the screws...many of which are different, Probably, the best video I have seen, You may also want to help novices like me to first check the temperature of one's laptop....I don't know but I'm going to find out! Excellent video and very thorough explanations. Happy New Year!!

Very informative video Thanks

Thank you! Will try tomorrow

I found this guide very helpful! Once i got the fan and mobo out, and opened the fan enclosure i discovered a thick layer of dust, completely blocking the heatsink, which was only visible once i got inside the fan. I cleaned it all out, and also applied new silver grease on the processor. My temps with from idliing at 50c, and peaking near 100c - down to 34c idle and 65c peak!!!

Hi, very nice video. I recently repaired the same model laptop. One additional step would be to remove the fan from the casing (4 small screws on the metal cover) and clean the openings to both radiators. On the one I repaired, the radiators were completely clogged on the inside, stopping the airflow and causing the computer to overheat.

This sounds like a weekend project. My DV6 vas awsome when i got it years ago. But my fan is makeing noice and the temps are crazy. I underclocked it just to have a chance to use it. But even then the cpu throttled due to high temps. I tried to disassembly the DV6 before but i quit mid through. With your exelent instructions i would give it a try again.

great video, i think i might try this sometime. one question though, how did you check the actual temperature? do I have to download a program or is it a factory program? Thanks

thanks, helped me out too. The only thing you didn't show was disconnecting the monitor flat plug from the motherboard, you have to pull that quite hard for it to pop off. Other than that, great. Was easy. I took my fan completely apart as the blades looked ok, but the exhaust was clogged up. So I recommend to others to do the same. This meant the air couldnt get blown across the heatsink copper pipes as there was a wall of dust 5mm thick. now temp is 45oC and no fan :))))

Gracias! Con tu video pude solucionar el problema de mi laptop!

Great tutorial! As a former Lenovo field technician, I would recommend (if possible) using an anti-static mat; particularly when handling the system board. It looks like some type of bed spread or blanket in this video which are magnets for static and EMI. Especially in winter months.

A very good instructional video. Additional tips via the comments are also worthy. Cheers 🥂

thanks man! based on this video i made my own one!!

Thanks for the great video st a question about your laptop, it has 2 spots where you put the paste and mine had only one. does it mean that your laptop has two processors and mine has one ? and just for reference what model is your laptop.. i think I am buying one like yours..

Hi there, thanks a lot for the handy video but I have a question, I have the same laptop and im curious. Where does the fan draw air in from??

Thank you..anyway what is the software to detect temperature shown in the end of video?

your video was very helpful but let me ask you after removing the dust and the glees do i have to put a new one?? before closing back !!

THANK YOU, you're instructions were great. One important correction is for users to take off the 4 little screws to take off the fan since the inner grill of the vents that you can't see from the outside will be absolutely clogged with dust after years of use. It takes a few extra minutes but this missing step is very important.

hi, can you suggest ssd brand that i can use to replace my hdd? i'm planning to get a budget 128gb ssd. Thanks!

Excellent video. By following your detailed step-by-step instructions I was able to diagnose and repair the fan problem on my wife's HP6

Thank you very so much... Your video help me a lot... I have no money to fix my notebook and the autoryzed is very distant for me... A question: Do you recomend that I change the processor of DV6 6150?? Hugs from Brazil...

my keyboard is not coming off like yours is and the keys did not come up with keyboard it is increasingly hard to access or get under the tabs without breaking any other part of the lap top, i thank you for your help and everything you said up to the keyboard part had helped me so i thank you for your time.

hi Easysteps Can you share where i can download the heat monitoring tool you used on your laptop? also is this laptop model can be upgraded to 16GB RAM? thanks Alex

Thank you this drastically decreased my temperature. I would also like to add more ram. What are some good ones I can buy? (with links to the product please)

7:15 The dog agrees as well, it is a big problem. Thanks for making this video, really appreciate it.

It really helped me out to fix the overheating problem. Thank you! However, now my touchpad is not working..Lights around are on but there is no cursor. I double tapped the corner on top but didn't work. I checked the flat cables under the keyboard and they are well connected. I might have missed to connect something. Do you have any idea? Thanks again

Very Helpful ♥️

This bloke is an ace

1:52 You can also use the slider (the same used to release the battery) to release the small cover too.

Worked for me!!! Thanks.

Hey do you have an idea why my fant might not be working properly (loud noise) even after i cleaned it. I even went one step further and got the termal coumpond kit. I cleaned everything I had to before applying it and I made sure I dint put to much or not enough of it. After everything i did my fan still makes a really unbearable noise even if I dont do any major tasks on my laptop. Being on facebook or youtube sometime causes it to overheat. Ps its and older model of the same laptop youre cleaning in the video.

Awesome thanks so much! @sqgl is right about the things you missed.. Unfortunately I broke one of the screw points on the fan because I missed them, but besides that, this video was very informative. My computer is working so much better now!

thank you peace ✌🏾✌🏾

Thank you for helping.I was tried to get my fan but actually i forget to get my dvd nd keyboard off.you showed it how should i do.thank you.and i want to ask is it important to clean cpu nd using silver?and how i find that silver?

Very usefull tip

@2:04 the same thing you do to take out the battery can open that up easily, just go in the opposite direction with the pull err lever? and it'll open it for you.

Hi, very nice video. Could you tell me whether the fan and Heatsink could be seperated. ? I think only the fan is available on amazon india

I love you!!! Thx u so much

What software did you use to monitor the temperature? Also, where do I get the grease? My fan is only noise, never had heating up problem, it gets very very hot during gaming but I keep it cool by slightly raising it above the desk and keeping the room very cold. Thanks!

I have the same issue. Gonna take a crack at it shortly. Thank you very much.

Very nicely explained. Where do you get the grease?

Thank you for the video. Could you please tell me the name of the grease you used? I am not sure which kind of grease I can apply.

Thank you for that its really help full will you please tell me which grease are used and i want to buy new fan for laptop i am have same laptop which fan i have to buy ?

Great job!

Thank you!!!

Thank you..!

Thank you....you missed some parts out though but thank you

:) Hey a small question. how hard and how much work is it to replace the entire button part of the laptop? The plastic cover broke on my laptop, :(

hello, se lu puede cambiar de procesador a esta comutadora y si si que procesador me recomiendan?