Thank you for your positive feedback.

Thanks for your positive feedback.

Thank you sir.

maybe go to a bafang motor system. Bosch is for people that still like riding their bike.

Did you have 1.5.0 Firmware

I sometimes get 503 error, even though i never turn off computer until it countes down to 0. Now I read that you say never to plug charger to bike until its off. I never heard anything about that. Can you tell what you know about that problem?

@@runef7471 , the Bosch gen 4 motors have anti hacking software. If you have a speed dongle fitted and you plug in your charger or before the display has fully reset it will trigger the anti hack lockout. Unfortunately I have discovered (the hard way!) that even though the display looks like it has timed down to zero the software doesn’t agree!! Consequently the only way to be absolutely sure that the software has correctly reset after a ride is to wait for the display to time out and go blank after a ride. Since I have taken this approach I have never had a problem. We have a number of Bosch powered bikes: our Haibike, Scott and Canyon bikes all are fitted with dongles, and I can report that waiting for the system to go to sleep is foolproof. Hope this helps.

@@oddjob4877 great !! Then that might be my problem. Thanks m8 :)

@@oddjob4877 What if the battery runs out and I don't have time to wait to turn it off?

Your comment just sold it for me I have a cube stereo hybrid pro 500w hoping it gives me 50 too

New speedbox 3 is unlimited speedbox 1 was 50kph which is pretty fast to get around traffic and such.

Hey mate! I hope i works for my cube stereo hybrid 140 hpc race too..

How long does the battery last though I imagine it goes super fast

Will this Speedbox 3.0 work for Bosch Center Motor Performance line CX Gen 4?

@@NetMillionaire Yes, we confirm compatibility.

How fast does it go, have you tested? I have the same motor

@@SpeedBoxTuning hi sell? Kit set ebike link have?

@SpeedBox Tuning : I've not seen the performance I'd expected to gain after installing my SB3, best I've managed is low 50km/h's on a downward incline. Now I know I'm not fit enough to perform this on my own, so it IS working to some degree, but I expected the Pedal Assist to be much better than it is at lower speeds (I bought the SB becuz I am extremely unfit and required the additional assistance but it doesn't seem to be there). Do you have any thoughts about the lack of performance improvement I'm experiencing? Also, when j first purchased this bike (2nd hand), the previous owner had moved the speed sensor magnet onto the crank arm, and the sensor in a location to pick it up there. I changed this once I installed the SB and noticed - was there anything to gain from them doing this? I've ever since had troubles getting the speed sensor to pickup the magnet. I've tried a small cube length of neodymium stuck to the spoke, and also a regular bike computer screw on sensor, and neither is better than the other, I have to fiddle with the magnet and the speed sensor before each ride to get it working and prey it continues to work. I'd really appreciate some technical assistance/feedback from you guys as soon as you have the time. Cheers, Nash

Thank you very much for your positive feedback.

I also own a RM (Delite Mountain) and there was a RX Chip hidden inside the motor cover which i removed. Was it a problem to place the speedbox inside the cover? I think there is not much space...

What is the RX Chip for? To fit the SpeedBox just takes a little time to carefully pack it in the small space around the motor and secure it with a zip tie. The bike now has 9674 miles and haven’t had any problems.

@@frankiehoosier9165 the rx chip is a gps tracking device which comes with the bike

Destroys range?

Is it worth to place it? I have bosch active line motor (36v-250w motor, 25km/h). My display is intuvia lcd display.

dangerous af

Sorry guys, this was in 2012. It was a non-electric bike. The gears and the mountains allowed me to do that😁. Just got a cube acid hybrid 400, with Bosch motor 500w. It doesn't have gearing to go over 35mph..

I had an idea: on this ebike Cube acid 400, with mid motor, I am thinking of adding a 1500w 48v front wheel motor. Plus, derestrict the Bosch original motor (I already ordered speedbox 3.0)

Hi there. Do you still are not getting the error code? Alencar here. Thanks

@@Ju-dn1jq still no error, I use my Trek Allant 7s for doordashing and it’s a champ.

@@nassiratti8542 Do you have to do all the steps as in the video at around 3:32? Seems a bit confusing. Thank you.

@@len9483 if you have the gen 3 motor you may have to take the crank off, but with gen 4 motors there’s no need to take the crank off and you can simply take the cover off and install the chip.

Thank you Nassiratta, but I was referring to scrolling through all the modes and pressing the up and down buttons to see the speeds.

Thanks for your positive feedback. It is appreciated.

@@SpeedBoxTuning Nice video I have cube touring hybrid one 500 ebike, since it is a paddle assist and due to my health requirements I would like to add throttle to my cube ebike, please advise / guide on how to go about having throttle control installed in it. Thank you

Not everywhere, not in France! up to 30.000 euros fine.. be careful lads, check your laws

​@@dzengerinkdo u have an example on a actual case someone got that penalty?

Does it give me more power for hills?

How are you getting on with it now? Any error come up? have you done over 1000km yet? Interested to hear your experience

@@tvaccount6211 Check my initial comment. I made an update.

how do you avoid the 504 error thing

@@sanderfrigolagroen5871 how u doing?

We appreciate your positive feedback. Thank you.

Do you remove battery for charging?

@@tekmekster No just use the charging point on the bike. It all still operates perfectly now after 100 rides.

The reason that you should wait is that the Bosch system will know that the sea box is plugged in don’t wait. It’s a computer so it recognizes there’s something plugged in and work around from Bosch is that you wait till it says 0.0.If something happens to your motor god for bed, your warranty will be void.

1000k,s now since i installed speedbox ,great really is an easy install, tiny cable tie for the wiring and tuck the box away ,literally done in minutes

Dont tell me you cant use tie ribs to pack it up men.. or did you have two left hands

Perhaps this mod is not for you?

they show it dangling free inside at 3:32

Use your imagination ffs

i'd suggest a little 3m vhb tape or cable ties

Well, did it work?

No. Allant 7 . Nothing .

@Matthew Mullins where are u stated in can?

Please, just tape them.

Again, coming from someone who's done this. It's easy. Really easy. There is plenty of room. Great bit of kit.

On which bike? Please.

@@johnieallen6115 It doesn't matter wich bike he did this to, because it's the Bosch motor what we are talking about and not the whole bike.

Hello, yes we confirm compatibility with all the Trek bikes. SpeedBox 3.0 for Bosch is compatible with all the displays - Intuvia, Nyon, Purion, Kiox and Cobi.

Hello. We are glad that you are satisfied with the SpeedBox, even if it is not for a Yamaha motor 🙂 It is true that it is not always necessary to remove the crank from the motor. We made a video of the handle being removed to demonstrate this option as well. Plus the video is clearer and the motor cover did not obstruct the shot.

@@SpeedBoxTuning Great !!! Just ordered a Speedbox 3.

Can you help me please

Olá, obrigado 🙂

Hello Jim, yes of course. SpeedBox 2.0 for Bosch is fully compatible with your eBike.

Hello Vesa. Sorry for late reply. Speed limit setting is permanent until next change in settings. You do not need to wait for the countdown, if you do not activate the tuning. Yes, the countdown process depends on the length and speed of the ride - usualy takes a minute or two.

Second half of the video is dedicated to speed limit setting. I'll be happy to help you figure it out, please just contact me on info@speedbox-tuning.com.

@@SpeedBoxTuning Thanks for getting back. Just figured out what it is lol! I have the Speedbox 2

2nd this .. hope it still works with the update ?

I went to one of my bike dealer he told me he does not make the 85newton upgrade because that would break the unrestriction kit... but did not know kit of which brand

+1

Yes, it is compatible with new update that increases torque. It does not affect any of riding modes. EMTB mode still will be EMTB mode.

@@SpeedBoxTuning That's great to know i will be buying. Appreciated

The user James MacFarlane says it does not work. I wait for his explanation

@@artgreg2296 I've just bought mine but not opened the box. However, I've had mixed reviews. Some people say it work's with the latest update I believe that you need to make sure that when updating the latest bosch software that you remove the speedbox and always make sure you let it run-down the clock before switching off and before connecting your charger. It should work that what I've been told. I'll wait for the someone from the speedbox box team to answer us. But checking their the Facebook page they inform us that it works with the current version!

Yes, SpeedBox is fully compatible with COBI. You can reach us on many phone numbers that are situated on our website. You can reach us on Facebook, Instagram, email, etc.

There is many of them. Depends, where are you from. Only special tool is crank puller though.

Yes, soon, we'll start working on the new SpeedBox for 2022 Bosch Smart System.

When SpeedBox is deactivated, bike acts like there is no SpeedBox installed = default speed limit. You can turn the SpeedBox on/off whenever during the ride.

@@SpeedBoxTuning Nice video! I have cube touring hybrid one 500 ebike, since it is a paddle assist and due to my health requirements I would like to add throttle to my cube ebike, please advise / guide on how to go about having throttle control installed in it. Thank you

Hello. It depends how long have you been riding. Let´s say one and half minute.

We counted with situations when customer must stop on traffic lights. In this case you are allowed to interrupt the countdown. Basically, countdown might be interrupted occasionally. However, it must not be completely ignorred. Just at the end of your ride, please let it count down to the 0.

Hello, yes of course. SpeedBox 3.0 for Bosch is fully compatible with Bosch Cargo line.

This is our way how we deal with Bosch's tuning detection.

@@SpeedBoxTuning What are the chances that this can be detected by a manufacturer even after being removed?

@@brakesforsnakes757 +1

SpeedBox Tuning what does “tuning detection” mean? Great product. What happens if you turn it off before the countdown ends?

Yes, SpeedBox is fully compatible with this update. Feel free to download it.

Yes, we confirm compatibility. Link is situated in the video description.

Hi. After switching the e-bike off and on, it is necessary to activate the tuning again. The display shows a value of 9.9 kmh or 6.2 mph. But if you set a maximum speed of, for example, 30 mph, it will stay in memory and you won't have to set it again every time 🙂

Hi Alan, updating is recommended. SpeedBox has no negative effect. Warranty won't be voided because SpeedBox is untraceable.

I regret to inform you that we are not producing these.

SpeedBox 3.0 for Bosch is fully compatible with new 2021 Bosch update. This update is related to Gen4 only so you must have SpeedBox 3.0 for Bosch to be able to enjoy the new udpate.

SpeedBox Tuning can we leave the speed box plugged in whilst getting the update ?

@@Raceeverything If you leave the chip in, it will be found by the Bosch software during the upgrade and void your guarantee.

So if you take out speedbox when you get a service done is the bike shop able to tell if have had speedbox on there ?

Today I got 504 error after 8000 km 😮

Hi, Sam. If you don't drive many kilometers with the tuning on, the countdown process can be quite fast. It will probably happen faster than the e-bike turns itself off.

Did you get a response I would like to know the same thing as I have a kiox

same here need to know

Dobrý den. Instalace tuningu je neinvazivní, pouze se napojí na stávající konektory. Není důvod, aby tuning ničil motor nebo baterii.

He says this pretty much on the beginning of the movie.

@@SebGruch actually it is more complicated than that because if you do the 85 newton upgrade and so will be the 2021 models by default it seems it will not mork anymore as someone commented here

I've had a Speedbox on my Bosch motor from almost new. Currently done more than 12000kms and it still feels just like new. :-)

Had my speed box 2 for 2 years do approx 200 miles a week off road commuting and still going strong ,brill bit of kit

If your eBike is equipped with Bosch motor, then definitely yes.

Hello Paul, we recommend to update your system and then install the SpeedBox. SpeedBox 3.0 for Bosch is fully compatible with your eBike.

Hello. No, for your Smart System you need SpeedBox 1.0 for Bosch or SpeedBox 1.0 B.Tuning for Bosch. B.Tuning means Bluetooth, so you can pair you e-bike with SpeedBox App. www.speedbox-tuning.com/p/speedbox-1-0-for-bosch#413 or www.speedbox-tuning.com/p/speedbox-1-0-b-tuning-for-bosch#421

Basically, it's true. However, there are ways how to overcome that. SpeedBox 3.0 for Bosch is the way. It's fully compatible with the newest Bosch motors.

@@SpeedBoxTuning so you're basically admitting to tricking the bosch software, then telling people this won't void the warranty. Very nice.

It's recommended but not necessary.

Yeah it’s the same if you turn the speed box off. The bike will go back to default.

Yes, exactly the same.

Yes ones the "computer" of the bike is conntected to the dealer/sellers laptop etc for service etc. History of the bike will show that in its "lifespan" it has provided more KW's at higher speed which leads to the proof the engine has been messed with.

Whoah! You have Good battery i have E6100 its so fun with speedbox but max 50 km/h

Yes, it is fully compatible with Performance line motor.

Hi. Yes, you have. It is also a bit of prevention against tuning detection.

Yes we do. SpeedBox 2.0 for Yamaha is fully compatible with PW-X motors.

Speed can not be unlocked anywhere in the settings. SpeedBox is compatible with mid drives only. Ebike tuning drains battery a bit faster. However, it is just one of many factors that have impact on discharging of the battery.

Video captures Bosch Gen4. However, SpeedBox 3.0 for Bosch is fully compatible with Gen2 and Gen3 too.

Thats a big one

Hello, please just contact us on info@speedbox-tuning.com. There might be jut loosen contact between your display and SpeedBox (for example).

There is just one special tool - the crank puller. We can help you find the closest retailer though.

Hello. The Walk function also works with SpeedBox installed. The button for the Walk function must be held. You can check product compatibility here: www.speedbox-tuning.com/p/speedbox-3-0-for-bosch#237

Hello, John. You can have both SpeedBox 2.0 and 3.0. In this case, we recommend the newer 3.0, it has more features. Activation/deactivation is completely simple. You just press the WALK (assist) button. If you don't have a WALK (assist) button, press + - + - or - + - +. That's all :-) With the SpeedBox 3.0 version, you can also set your own speed limit if you want to save battery. As for installation, you can use our picture guide or video guide. If something is unclear, you can contact us at any time via chat speedbox-tuning.com, FB or IG.

@william gillan installed it already almost a year, works fine ;)