Here's my new Professional Grade Leaf Blower. Hope this helps in evaluating what you might be purchasing.
Пікірлер: 62
@davidl13072 жыл бұрын
Really appreciate this thorough but not drawn out assembly guide. I didn’t find the paper instructions that easy but also have zero patience. Followed you step by step and it made it an easy and, dare I say it, fun experience. Thank you for doing this!
@kleankash8811 ай бұрын
I was looking for a lightweight blower for my deck. kzfaq.infoUgkxgioZQl3J5wPGAeDINzbieKbT5qomSEx3 There are some huge trees around my house and the leaves and pods drop all over my deck. Having to move furniture around to sweep has become too big a chore. This blower was the answer. It is light enough for this 70yr old lady and powerful enough to blow all the tree droppings off my rather large deck. Thank you B&D. Be aware the cord is not included. I use a 3 prong outdoor cord 25' cord for my 12' x 20' deck. The cord retainer works very well, but don't try to pass the plug through it. That is NOT how it works. You just have to loop the cord and it works great. One of my best purchases. Very happy.
@jeffremnel48467 жыл бұрын
Static cable goes through flex pipe and exits before installing throttle control tube section. Tighten hose clamps to ensure solid, continues contact with plastic tubing to eliminate any static discharge. Ensure plenty of cable movement and trim excess or go the extra mile wrap extra wire around throttle control swivel bolt.
@johncobb26957 жыл бұрын
I bought this same blower 5,days ago and have used it for 4 hours so far. I had the same experience starting mine ( 3 pulls and wham started right up), this blower is very fuel efficient, 1.5 gals for the 4 hrs use, most at full throttle. I am very satisfied with this purchase so far and I haven't experienced any static electric shock. Thanks for the great video, it had an influence on my buying decision.
@NomeusRandoms8 жыл бұрын
no anti-static wire?
@jamespt20056 жыл бұрын
Hi Darren, great video. Can you make a video showing us how to route the static wire please
@atlred2 жыл бұрын
Just wanted to thank you for your video very helpful to me, it seems like every time I read any instructions they never make sense so THANK YOU !
@chase32537 ай бұрын
I was calmly taking notes while sipping on my coffee until you mentioned your paramotor and I almost spit some out, lol. I've always said that my leaf-blower makes me feel like I have my Parajet on my back.
@wildwhiskeywolf81988 жыл бұрын
Thanks for the great review...I just purchased this model today.
@ethanburns13578 жыл бұрын
Fantastic vid man very descriptive nice speaking volume best vid on this topic yet!!!😀 I'm looking at purchasing a echo and it's nice to have a nice vid on it!!😀
@TrinityFD8 жыл бұрын
Great review on your new machine. Thanks!
@geravega775 жыл бұрын
Sir u explain this pretty good. I'm all clear now on how to assemble my echo. Thank u so much.
@omerseho20935 жыл бұрын
Excellent blower does same job as any stihl or husqvarna ,a had a br 600 stihl and it is about the same as 580 t .
@carlycfs8 жыл бұрын
Yes, I agree with "Traxxasman 15" below; this is a fantastic video with very efficient editing. I feel this is as about as close as a person can get when it comes to hands on haha. Anyway, this is a very helpful video because I am researching the differences between the PB580T, PB580H, PB-265LNC, PB-265LN. I'm not trying to be cheap, but I want the most bang for my buck in terms of reliability, durability, and performance. BTW, what do I need it for? Well primarily, to blow the dust, rocks, gravel, and trash out of our local skate-park so I can skate without crashing on death-rocks LOL (our community displayed the highest wind gusts 52 percent of the time with a weekly maximum wind gust averaging 51.4 mph.) I can't wait for your follow-up vid. Again, thanks for this video:)
@jnagime5 жыл бұрын
Good job,Just got one and I have has a wire hanging on a flow tube,any idea whats for it? Thanks
@Joshuacruz19827 жыл бұрын
what about static wire. i feed mine inside tthe air tube.
@Kendell0623 жыл бұрын
I saw a video about that wire and fed it thru the flex tube and thru all the other tubes. It's supposed to protect you from getting shocked while using the throttle you put on the tube.
@bambam9111008 ай бұрын
Great job ! Thank you for the video!
@antonioarreola43626 жыл бұрын
Great video Sir. Thanks
@paultrost74065 жыл бұрын
What about static wire!?
@BWalker87326 жыл бұрын
Nicely Done 👍🏾
@BIGTIM3575 жыл бұрын
Great info. Thanks
@RedSunofNW2 жыл бұрын
My extesion tube with the metal nose ring kept falling off the main tube. Connect the extension by inserting and twisting counter clockwise does not secure it in place. The vibration of the tube during operation will make the extension falling off🤣 did I do it wrong?
@Currency494955 жыл бұрын
Picked up my local home depot's display model today for $240. Was in the market for one, was thinking Echo or stihl. Guess they sold me on it for $82 off.
@gregladd95844 жыл бұрын
Thank you!
@wolfsden38123 жыл бұрын
Awesome video
@jamespt20056 жыл бұрын
Hi Jose I just got mine. I don't like the anti static wire that goes from the outside of the hose to inside which you would think that is better design would be to have a better product to where you would not need that antistatic wire. I Assume that other brands don't have that wire. That theoretically would create a small gap
@kappy04053 жыл бұрын
It is kinda strange, but it doesn't cause any issues, & the gap isn't even noticeable.
@JuanSanchez-nn1db3 жыл бұрын
Nice video. Thanks
@robertlafountaine91082 жыл бұрын
Funny how no one shows how they screwed the tubes on. Min e keeps falling off. I twisted it every which way.
@kittynam63309 ай бұрын
Thank you
@notarivsanonymvs25618 жыл бұрын
What about the static wire? Does it really go down the tubes?
@MyFortressConstruction4 жыл бұрын
@Art Vandelay That was the whole reason I came to see the video. Looking for what to do with that wire. Thanks
@tsqualers Жыл бұрын
@@MyFortressConstruction yes it goes down in the tube. Reduce static friction
@emredreyyandanovic32585 жыл бұрын
How does this compare to the Stihl Br 600? I have two but was thinking of buying two of these first, but I did research and obviously the Br 600 has more CFM, but would you really know the difference from this in real use? Anyway thanks to whoever helps out!
@PersonOnEarth4 жыл бұрын
For landscaping jobs where you just pull the blower out for 10-15 minutes after a mow you won't notice much difference. For a huge leaf job, the BR600 would probably do in 4 hours what this blower would do in 6. If you get lots of huge leaf jobs though you'd of course better get yourself a BR800 or Pb8010.
@ilyasguvenilir88854 жыл бұрын
I wish you could show how you installed the throttle.besides that good video. Thanks.
@williamschueschner96903 жыл бұрын
Step one: Read the directions that also have pictures just in case *If still having issues just circle back to step one 👍
@snoopfurlow12755 жыл бұрын
how long does the the echo blowers hold up using them commercial?
@1965mstngmike3 ай бұрын
I used mine maybe five times and the engine seized🤦♂️
@Yuro_eatsplatez4 жыл бұрын
Mine is not starting. :(
@gyver4715 жыл бұрын
Great review space man
@michaelg5894 жыл бұрын
Forgot the anti static wire
@remyd87673 жыл бұрын
The arm on mine is pointed backwards. Should I return the unit or just try to twist it around
@robertlafountaine91082 жыл бұрын
This comment was made 1 yr ago so u must have figured out that the arm can be rotated forward. Lol. Must be your first backpack blower.
@remyd87672 жыл бұрын
@@robertlafountaine9108 sure did!!! Haha
@xc75ranger2 жыл бұрын
Hey Daren - Must be pretty bad where you are, you need to carry heat when your leaf blowing? (I'm a former LEO), nice vid by the way.
@gregladd95844 жыл бұрын
I can’t see the choke or the idle position in your video
@richardbovee66208 жыл бұрын
What did you do with the ground wire. The static build up will shock the hell outta.
@letshearthatagain47038 жыл бұрын
yeah so what did you do Daren?
@arciefan7 жыл бұрын
Lol. Here's what I thought. Got home today and unboxed and noticed that wire dangling and thought sure that was where they cut the security alarm off of it at the store for some reason. Went out and used it and sure enough was getting peppered with static on occasion but not all the time. So I was thinking must have been a wiring issue with the kill switch. Ran across this post and it immediately clicked. Retrieved the wire I had cut, put a new ring terminal back on it and installed it around the blower housing, attached it to throttle cable with a wire tie, around the blower elbow and then into the flexible tube. So glad I ran into this upload and these comments. Thanks all !
@arciefan7 жыл бұрын
Follow up. Used it today for pretty long time and no zapping and really love the way this thing moves leaves quickly. Also to note, when I put the new ring terminal on, I did put it back on that same screw it was on originally.
@flooritnfly5 жыл бұрын
@@arciefan pictures?
@arciefan5 жыл бұрын
I'll try and post some tomorrow if you aren't able to figure out. My best recollection is there a routing picture of the wire in the instructions. Basically you're running a wire from the back of the engine up and around and into the tube so the static charge gets grounded to metal , so that way it has no way to reach you.... I do remember seem like the shock coming from the screws on the on/off / switchand /or the throttle ,,,not sure just a piece of tape over them wouldn't work, or maybe some liquid electrical tape but I remember doing it with the anti static wire
@jakeranch67316 жыл бұрын
Don’t put the hose clamp on until the tube is on and there will be no need for any lubricant. That’s how it’s meant to be installed
@jakeranch67313 жыл бұрын
P S uhhh...yes
@GuitarBySamMartinez2 жыл бұрын
forgot the silver wire...
@waynedrew70742 жыл бұрын
You skipped a step. Static discharge cable. Run it through tube