Editing audio the right way in Logic Pro X

No video

Editing audio the right way in Logic Pro X | Specifically vocals

Рет қаралды 23,509

3 жыл бұрын

WELCOME TO THE HIT LAB ACADEMY
Learn what is the most effective way to edit and clean up your audio files. The noise floor can be a major disruption to getting a quality vocal sound and it uses a lot of CPU when not edited out. This video will show you the best way to clean up those noise floor gaps and make your vocals sound clean, neat, and ready for the final mix.
To find out more about how you can work with us at The Hit Lab, please visit our website
www.thehitlab....
The Hit Lab Academy is a KZfaq audio mixing tutorial site based out of a professional recording studio in Johannesburg, South Africa called The Hit Lab. Most of the lessons are based on Logic Pro x which is DAW used to make music. The Mixing lessons will include topics ranging from mixing lead vocals, beat making, vocal sampling, sampling, the logic sampler, mixing drums, compression, parallel compression, and much more.
Join us for many mixing tips and music production ideas every week. We aim to upload every Monday but we might add more.
Please join us in the comments below and share your ideas and tell us if you have any topics you would like us to explore in the world of making and mixing music.
Our host
Howie Combrink (founder/owner of The Hit lab) is an accomplished artist and music producer.
The Hit lab works closely with Sterling Sound in New York City and is proud to call Sterling Sound the home of The Hit Lab’s preferred and most used mastering engineer, Grammy award-winning Randy Merrill.
Join us in learning more
Website: www.thehitlab.co.za
Instagram: @thehitlabstudio
Facebook: Thehitlabstudio
#audio #editing #logicprox

Пікірлер: 47

@hoopscentral1828 Күн бұрын

Use to do it like this then noticed on tracks with lots of vocals it would take forever. Now i do the strip silence and just adjust and fade. Saves a ton of time.

@aw1091 Жыл бұрын

Omg this was so needed clear and to the point for a beginner like me thank you so much😊.

@FLEXSON_007 Жыл бұрын

what a wonderful room you have !!! looks very good :)

@colt45hero Жыл бұрын

I’d like to see you do a full video on using the step sequencer.

@jessyjosh-kb6jj Жыл бұрын

Very cool and brief

@moeman777 Жыл бұрын

Really great bro thanks so much

@1infantking 2 жыл бұрын

thanks a lot keep rocking

@martinspangenberg8117 2 жыл бұрын

Great techniques!

@THLTheHitLab 2 жыл бұрын

Thanks Martin :) thanks for watching

@DoodleDuduDude Жыл бұрын

Thank you

@jojo-fj7lw 3 жыл бұрын

Manually >Automatically

@LedufInfraLeDufiNFrA 4 ай бұрын

logic x worst audio sample tool ... pouahhhh

@johnnyjoedillinger5254 14 күн бұрын

Love this, simple yet effective. Thanks a ton!

@brockdinbarr 27 күн бұрын

Nice one. You don't need to click the selected audio to be able to delete it in more modern versions of LPX

@newmusic4383 Ай бұрын

Thanks bro

@user-fj6wg5dg2g 3 ай бұрын

for a Dyslexic like me that has a hard time learning from text this was super helpful

@skipb119 3 ай бұрын

Great job! Thanks for the effort. This was very helpful to someone coming over from Pro Tools.

@brianatysonofficial 2 ай бұрын

Coming from PT too, the editing is so simple on PT and I’m having a tough time making the switch. But I’m TIRED of the $40 a month!!

@andywebstone3833 3 ай бұрын

Cracking tutorial, thanks very much 👍

@edrambeau1534 5 ай бұрын

Do you have a video that describes how to do a perfect edit. In other words, the instrumental is 32 bars but I'd like to edit it down to 16 bars. How do you hit the down beat with precision using Logic Pro?

@therainmaka6455 6 ай бұрын

Nice 👍🏾

@ujjwalsuvedi9955 6 ай бұрын

thanks 🥰

@TheDougSpot 7 ай бұрын

You don’t have to click after your selection with the marquee tool, you can just hit delete and save a step

@johnviera3884 9 ай бұрын

at 6:30 great for drum samples too

@sorryangelmusic 9 ай бұрын

Love it thanks

@joshuadavisorg 9 ай бұрын

Terrific! TY!

@mehmetnaciakkk3983 Жыл бұрын

I just discovered this channel, while looking for audio & drum editing in Logic Pro X. This was a very understandable (and refreshingly short) version. Thank you! I am assuming the approach is similar to editing not only voice but guitar audio as well. Please guide me if that is explained somewhere else.

@patrickevanfleming3469 Жыл бұрын

I've transferred my old analogue cassette recording from the 90's as a single track in Logic Pro and am trying improve the sound quality. Do you know what that process is called? I can't find anything about this subject online. The only thing the internet talks about is how to make new digital recordings sound more Analogue. I'm trying to do the exact opposite. Any advice? Do you have any tutorials on that subject? Anything? Thanks

@TheRealPhilMode Жыл бұрын

I liked this approach but I preferred to just increase the pre attack time and then increase a little bit of the post release time. but im not editing singing vocals so i have it a bit easier to chop out dead silence.

@lylemccartee5605 Жыл бұрын

I loved this tutorial video! I'm a news photojournalist breaking into the world of voiceovers, and you gave a great example of cleaning the (vocal) audio. All the best to you!

@Irahenke Жыл бұрын

That was fun. Thanks for the lesson.

@williams.5158 Жыл бұрын

Thank you Howie

@terrelljonesmusic 2 жыл бұрын

Good looking

@sheddybhulji8196 2 жыл бұрын

Excellent tutorial . Thanks

@JohnnyHands 2 жыл бұрын

When departing regions in this way, where there is space between them in the Main window area, have you ever screwed up the timing of tracks by accidentally moving one or more of them left or right? I've done this with a region or two, not sure how it happened, and want to avoid it. I thought of perhaps making sure each region starts on a beat boundary, or perhaps copying the starts of regions from the list editor after I've done all the silence removal I want to do. That way if it happens, I know where the start of a region is supposed to be.

@allanplaty5662 2 жыл бұрын

I like it

@tenorblue8682 2 жыл бұрын

What happens when the fade feature isn't working?

@THLTheHitLab 2 жыл бұрын

Just double check that your track isn’t set to take folders. Meaning, you have several takes in what seems to be one wave file. You can identify this by look at the left side of the wave file and if you see an A or a B. It’s a take folder. Select the take you want to use and flatten the folder by right clicking on the A or B sign. Now fade should work. Hope this helps!!