Baffeled? How about “ baffled”. I know you don’t understand the concept of a syllabic consonant.

@@garyfrancis6193dang, you harsh man.

No, it doesnt...lol. His 'engineering solution' is all but bunk. How did Ed charge those batteries? Did he put ANY type of power measurement into this? He just 'plugs in the wheel', shows it spinning...and says 'this is how it works'. Yeah well, how many batteries did it take? Did he cut ONE rock with this method? Do you know how many batteries it would take to cut rock in this way? How did Ed charge those batteries? With his tiny 'hit and miss' engine he had (most don't even know he had this). This is extremely inefficient. You would be better off using the mechanical energy from the generator its self to cut the stone. Ed only had ONE cutting device, which is seen at his 'at work' photo. This guys explanation above is all but a distraction from the 'real' technology used. Just like Tesla...they don't want you to know the real stuff. This guys explanation is bunk...utter junk.

@@Pawbreakers_com Ed himself could rise from the grave and say this video is correct but there is zero chance of you or people like you believing it because it takes away the magic you want to be real but NEVER is.

@@seditt5146 perfect reply to statements like that, might have to borrow it. His response to every solution will be nuh ah. I can predict another dozen situations or events of similar nature (read flat earth, pyramids)where that person will be of the opinion that the elite are withholding what was really done while also withholding the knowledge of free energy.

Here, Here, me too I always followed the mysteries of COral Castle. YES YOU ARE CORRECT BEST EXPLANATION TO THIS BUILDING MYSTERIES😈😉

I totally agree. This has shown me the answers to all of the questions I still had.

This guy is bullshit let me know if you believe him

@@maxrodgers5702 what in the video shows lifting 60,000lb+ stones stacked into 1/1000th of inch by a hundred pound man. It would take multiple cranes to attempt to lift some of the stones. Just lifting it would a engineering challenge. Now stack them where a sheet of paper can't even begin to go through. 1/1000th of inch. Any stone workers today. Stacking stones to that tolerance.

@@JamesSmith-lt5zz So Ed was either a midget, or emaciated?

He used the Earth's mag to move them and it deals with the cone shaped rocks he had and there's more to it water is one .

You make some very good points Ed, I tend to agree with you. There is more mystery here. Also Thomas is right... I heard a theory where water plays a part in the cutting, in an uncommon way. The pond /tub at the site is said to be used to create a kind of ionicly charged water which is ready after the water has evaporated to the second inner cut-out in the pond/well. Then used to cause the stone to cleave apaet by dripping it along the cut line. As I said 'uncommon'. If modern-day engineers, when trying to improve the 10 tonne door (which used to open with just a push of one finger), were only able to only ruin it all together... then it points to the use of an uncommon (miss-understood) force. Also can you imagine how much attention all those lights running, and having a truck engine running all night would attract, not to mention the added sound of the saws and solinoids going at the same time. I admire your mind and your video but I believe there's more to it personally.

He fracked the inside of the coral then pumped air into it and capped the blocks. They used water to float them.... I'm pulling this out of my ass, but that's how I would do it.

Nice video. Nice explanations. Though there are still many unanswered questions. Such as an uneducated man able to have a greater engineering understanding than the mechanical, electrical, engineers and physicists with a Ph.D. around the world? And, doing so from only reading books in the neighborhood public library? How could he afford to pay for all those working batteries, mechanical devices the were specially made with tools and methods he did not have access to or the most likely ability of resources and financal means to make or buy these specialize devices you arexmentioning? Part of me is, on a side note, thinking if we could just look at the record of all the books he had checked out at the library, read this book, would at least give us the background of how he was able to figure out the knowledge he was able to learn and figure out himself. I will give it to you, these are nice explanations to how he may possibly have built his castles. Though I also have to agree with the person here questions as well. 1) That is was stated by Ed that it would 3xplain how the Egyptians built the pyramids. 2) Why he was concerned that if the world should have such knowledge. 3) And, if I recall correctly how the earth's own lay lines, magnetic energy and such was what allowed him to do so. 4) I am also courious how he was able to move 30 ton stones? Yes a cart will make the moving of heavy objects easier. Though anyone who has used a wheelbarrow or a hand pulling cart knows, the more weight put in these carrying devices, the more difficult it will be to move. That is even if he had the cart sturdy enough to do such moving repeatedly over the years use. There is also that giant stone door he made that was so perfectly balanced on its center axis at the top and bottom that a person could open and close the spinning doorxwoth their finger, and little effort in doing so. Also feeling confident when no matter how many times opening and closing, that it would not fall off its axis, and be a potential danger to anyone around. I also recall how extremely secretive he was at night to all his workings. With stories of people trying to catch, and sneak a view of his secrets with pur his knowing, with no lick in doing do. Though again good explanations. Possable if not answering all the questions, then at least some. And, also demonstrating pictures to such objects, machines he had at his property for use, that most were not awair of. Those demonstrating the strong connection to these devices being of use in his project. So, thank you for sharing.

EdOfTheNorth The mystery is in the application of energy against the coral or stone- that concentration of energy force through the blades is not something we get to see except in something similar to plasma welding, or water welding. To cut the stone, not just a small stone but a massive, several ton stone, perfectly cutting the stone would take a great force, or would it? The interesting part is that people assume Ed did this on his own without getting the epiphany from someone else- how do we know someone else didn’t inform Ed and he just applied it?

no more complicated than a paper clip?

hahahahahahahaha

Billy Piazza oh really. and how does a fourth grade man with no vocational training on mechanical or masonery has carved it.And what is he purpose of making the telescope and align it with truenorth. And if it is that easy, why can't anybody be able to recreate such thing ever again

My friend. The video says that his father and grandfather were stone masons. He was also an experienced rigger. Mr. Russel also clearly showed how the cutting process occurred and how the flywheel was implanted. The only reason he didn't demonstrate how to cut the actual coral was due to the fact that there isn't any in Vermont. However, , I am afraid, the purpose of pointing a telescope at a star, was taken to the grave with Mr. Leedskalnin.

Yes, but a doc's son does not meccesarily bcms or knws aby anatmy. In d sm wy if his fthr nd frfthr r masons dat dsnt necessarily means dat he was equipped with masonry as well. And also he was a 4th grader and not eligible to rven attain in sort of vocation in this trade. Billy coral are quiet brittle and should be chipped wid a specific technique to prvnt thm frm breakin. How he'll be able to chip it?

Humm, that is an interesting question Sumeet. You are wondering how he was able to form those interesting shapes? I'll do a little research and get back to you with an answer my friend. It is nice to engage you in scientific discourse. I'm guessing you are from India. Greetings from America Mr. Ghai.

Thank billy, and i am sorry if i'll sounds abit offensive

tom maginnis One has nothing to do with the other. However, much of his knowledge came from masonry, and the Freemasons use the term as a description of sharing their secrets, but it is not true enlightenment.

Very good. the "secrets" were of the celestial arrangements. Whoopdy do right. you obviously DO know your stuff. My 104 grandmother was the grand matron of the local order of Eastern star. YES you are right on. NO building secrets just the letters on the five pointed star.

isnt YTube the source of great accurate knowledge? @$%@#%^$@&

Thanks, I was wondering if even the masons have forgotten the secrets they once knew, and I think you may have confirmed my suspicion. Another mason I talked to was aware of high level sacred geometry, and we were able to have a conversation based on the trinity and the clover being the center points for much deeper understanding than the flower of life. What I know comes from no order, and I think I remember what I know from previous incarnations. Once you figure out the 7 point star, the rest just falls into place through experimentation.

Made by one man Yes

Bingo.

100%

TELEKINESIS

We know how he moved the stones, on the back of a truck over the course of a few years from one location to the other ten miles away. People these days can't comprehend it because they want everything instantly done for them by someone else. This was a passion of labour for Edward, who spent a large portion of his life slowly working on the landscaping.

@@firstnamelastname-oy7es But didn’t they say that some of the stones were as heavy as 30 tons? How does a personal truck hall 30 tons?

IKR Maybe ppl skipped this vid bc the other theories were so much more fun just like the Ancient Aliens hype back then

So it comes down to either aliens or what this video says? Case solved then, its all here, 100 percent.

yea i went to visit because of everything i saw online but now i understand what it is and the tour certainly left no doubt about the museum :) i plan to go back soon and do the tour properly

Robb's Homemade Life b

Earlier days when there is no technology people used to say God did it. Because it is beyond their knowledge. Nowadays, they says it aliens done it. They do not understand the human possibilities and defame it by taking name of aliens.

Robb's Homemade Life Hey Rob ! I love the way you laid that out! There’s there real truth on how us humans can have people to look up too!

Naoki Kashima IMPOSSIBLE? woops you just landed on the wrong site to start using such BLIND words. I can tell right away you are either very young or very young at mind. Because these things are not impossible. What is impossible is to get the public to stop believing stupid exaggerated "non provable stories". As for 20 years that might be wrong but that's it the rest is "probably done by man" how is impossible for modern lazier unorganized minds to understand. Don't get me wrong Naoki, I am not running down todays people just that know one seems too much common sense old fashioned thinking any more WITH physical teamwork. I have levered some very large things into place and know Ed leedskalnin built this place with perserverance and sweat not some silly never ever seen device. Come on. Really. Ground control says NO. peace. Scott R.

Made by one man If ED used conventional methods for building the Castle how come he only worked at night? How much harder is it to dig and lift giant stones under the light of a candle light? What about the report of kids spying on Ed. They stated that he was levitating the stones using two cones. Kids reported that stones were floating as if they were giant balloons. How did Ed load that truck with over 30 tons of rocks in just 30 minutes? Ed was only 115 lbs (very small man).. What is the point of having so many inductors, transformers, the flywheel if he didn't use them for some grander electrical setup? Go read Ed's book called 'the electric current' it will give you a different perspective about what Ed was doing.

Naoki Kashima he didn't use candlelight, he had lights! He did it at night #1 because of the heat #2 he was giving tours during the day. He NEVER FINISHED THE FIRST SITE.. it took him 3 years to move the first site to the new location. He didn't levitate anything... he used chains, please look at Ed's original 1930's video of him lifting and moving the coral. If you still think there is something more, they have medication for your condition...

shidoin Did Ed Leedskalnin have advanced knowledge of electricity? Wad Ed a high level Freemason? All one has to do is go to the Coral Castle and look around. You'll see "the star of david" or the joined pyramids in at least 3 places within the Castle. You also will see the Moon sculptures. These are both well known Freemason symbols. Ed is known to saying, "if you put one of my devices on a rocket and fly it to the moon and then come back you'll have the same amount of fuel as when you started". What was Ed talking about in that quote? Is he talking about harvesting energy from the vacuum of space? I think so. If Ed only used levers and a tripod to move his stones how did he move the 35 ton stone in the Coral Castle? Why don't you do a video demonstrating how it is possible to move a stone with a weight of 35 tons using this method :P

Naoki Kashima no ed did not have knowledge of ADVANCED electricity, he did however understand electricity. He was NOT a freemason, but he was a stone mason. Stars, the sun, the moon. That's pretty mind blowing. There is not a 35 ton block at the castle. It's easy to take a statement and twist it to work with your beliefs..

Had to. its too much work and insulting the guy to say it was magic science unrevealed.

No, it doesnt...lol. His 'engineering solution' is all but bunk. How did Ed charge those batteries? Did he put ANY type of power measurement into this? He just 'plugs in the wheel', shows it spinning...and says 'this is how it works'. Yeah well, how many batteries did it take? Did he cut ONE rock with this method? Do you know how many batteries it would take to cut rock in this way? How did Ed charge those batteries? With his tiny 'hit and miss' engine he had (most don't even know he had this). This is extremely inefficient. You would be better off using the mechanical energy from the generator its self to cut the stone. Ed only had ONE cutting device, which is seen at his 'at work' photo. This guys explanation above is all but a distraction from the 'real' technology used. Just like Tesla...they don't want you to know the real stuff.

I knew indeed there would be no information here. starts out: I was was born very young... rocks are heavy... Thankfully your comment spared me from the rest.

There is a very rare video of Ed actually lifting and moving stones using tripod and pulley system with chains rolling on top of smaller logs on top of our logs. He also loaded the trucks that moved the stones 10 miles away and then unloaded them. He didn't physically move the stones by his own hands the way you might think.

I dont know about all that but I can tell you he did not work alone kzfaq.info/get/bejne/nNeSZrd_vN7LdIk.html

@@babayega_ He didn't let people see him work, so why would you expect that him doing something on film is *the* method he used. Personally, if someone wanted to film me while I work on a secret of mine, I'd make it look like like I'm working the hard way as to trick people.

During the tour they said he had a team of people help him showed photos ...idk what's true don't care it's something else

tbh if he could do, any men could probably do. Following his writings and his general understandings, I'm sure one again could form such monolithical structures.

scpetisism is great, but it can hold you back for the bad too

I want to see you do it.

@@Astrostone666 exactly.

@@Astrostone666 Check out FPV ANGEL here on KZfaq. Go to the video list, there is a man named Roy who is doing TONS of videos regarding Ed Leeskalins works, notes, books, and yes how coral castles machinery actually worked. It's ALOT of watching if anyone truly wants to understand this is a close as it gets.

Some deny my "getting close" but I know I am. THANKS

That is perhaps the biggest clue yet. It tells that the block and tackle were not the method used.

if your erect a tower as many times as he did you get quicker at it. My dad in the early 60s pulled the tubing string and rod string from an oil well he owned using the triple beam method. Lots of people did this. See the huge trees they loaded on the wagons? Not rocket science.

It's fake story. Driver was paid to make this joke (driver thought so).

@@randytucker3083 if it was they simple people would have figured it out long ago.

So we still dont know how it was done.

The only people that will find an explanation for anything in THIS video, is someone looking for an explanation(sort of) as to how this machinery was assembled. If one has no knowledge of what is required to actually handle blocks the size of those used in the construction of this monument.or for that matter,. assembling the blocks once they are in the general vicinity of where they are intended to go, they might consider this a AH HA video. What is it that makes some people so driven to explain things, that others, highly knowledgeable/experienced in their particular field, operators, engineers, stonemasons, ironworker, etc. etc.can not explain? The only explanation that I've found for it is FEAR, absolute terror of the unknown. That said, why don't one of you that feels that this video has enlightened you, removed enough of the mystery to build just one of the creations within CORAL CASTLE, DO IT. Make a video of it and post it here on You Tube so those of us not gifted with your acumen, can perhaps understand how Mr. Leedskalnins managed to do this by himself

No he didnt. Watch Searl zero point generator, real science

This is silly. Where does this show any proof. I wanna see stones lifted, he says he has all the tools. The hick didnt figure it out. Dont be fooled, they had ways of getting running electricity in much easier ways. This is stupid.

it ok if you prefer the magical explanation

You don't knopw your history of the place. I KNOW he lifted the rocks with chains and everything like the movie, BUT the wheel was always the TRUE mystery. THATS ALL. I want to know how he cut the rocks and what the wheel REALLY did. The rest SHOULD be obvious like all the rest of the giant sites, BUT how did they CUT the rocks. Eds wheel is an old DC machine. Does S stand for Stupid you say? He NEVER had utility power everyone knew that but he did have BATTERY power. for lights BUT MAINLY TO CUT ROCKS. NOTHING else. its a stone garden not a engineering museum. Lets try to keep is simple. You know the rest. And I beg to differ my good man it is NOT SILLY. I am hurt.

Thank you I am trying. I have cut rocks now but won't upload the "action" because of future plans for books movies, Documentyaries etc. OH YES I GOT IT NOW GUARANTEED. the rest is nothing more than $$$$$$$ to film capture, quarry, and lift some like the ol boy did 80 years ago. PS the doc is wrong on the batteries. they were not in the boxes. SAWDUST SOAKED IN OIL to preserve the poles was. Simple and I know first hand. I didn't and after 2 years of rain. mine are rotten. go figure. appreciate the comment. Scott R.

+TRISMAJISTOS thank you that is greatly appreciated.

I watched the same video!!! Wow another RFB follower!!!

I seen RFB video as well. It was an awesome video. The guy who showed up.and explained all about it. And had Richie as the lookout. Indiana Jones he called him. LOL.

i saw that on Marfoogle i think ritchie mirrored Marfoogles work

I just finished RFB's video too. Wish I could go see it

@@miked5256 no he didn't wtf

Thank you. I am just giving my best shot. and I heard the target go tink from a distance.Thanks a bunch.

Maybe. Pay attention at about the 10:15 mark for a plausible explanation. If you want to see the experiment demonstrated and the results reproduced, then no, that part did not happen in this video.

Nerdy McNerdlington Thanks for responding. I was hoping to see the duplicated apparatus perform the job since the video is supposed to have cracked the conundrum. I appreciate you pointing out the 10:15 mark because I did miss it before. This video is still a theory of how it was done to me and not the explanation since it wasn't duplicated on film. Thanks again.

:)

I miss that part to.If I had to use this saw to cut all this coral I would shit.Ed varyed or shielded the field of gravity.

There is no way those stones weighed anywhere around 30 tons. They were more like 2.5 tons. The blocks would have to be close to nearly 9 ft. cubes or 27 cubic yards to have that much weight. They look to be closer to 2 cubic yards on the video. It's coral not granite.

More to go BUT thanks

And I made this first comment before I even finished the video or read any of the others. Now I'm seeing much the same sentiment from the rest of the public and there's a reason. Very well done.

Guy C ill bet this is nowhere near how he did it

Guy C i think he used a drill bit

That music makes this sound psychotic. Your statements are occasionally so overblown, you come off as a crazy.

^^^^ I don't think either of you watched the whole thing.

yeah, how about " Made by one man?" this dude has got, ...uh what one might consider "HIS SHIT TOGETHER!!" KEEP YOUR VIDEOS COMING!!!

Also You have to make the wall look like the stone was melted together to where you can’t even fit a piece of paper into the crack then I might believe it is well I’m with you here

Did you not see the prototype tripod and cutting machine the author constructed? Did you even watch the video? That wasn't hypothetical at all. Mystery solved!

So what was the power source for the building of the Pyramids, moving huge rocks, cutting them and completing them so quickly?

J. Stribling wtf are you talking about, huge difference is craftsman ship! You cannot get blocks that flat and smooth from that method. Period, thats the real facts here

ZEN CAPTUREALL ON SUICIDE WATCH Science and logic win again.

Not him (Edward), but his friend Nikola Tesla !

FRIEND? The fuck. Just shut up you blind fool.

@@jojolafrite90 yes i dont see even the slightest mention Ed and Tesla knew each other, perhaps professeur essef was not being literal? I think he just meant that what we have lost from Ed was the same knowledge that we have lost from Tesla. Being dismissive can be distinguished from being derogatory. If you have a good analytical mind youre always going to be pissing people off anyway, the swears will just lessen the impact and let people dismiss the truth behind what youre saying.

@@lecinquiemeroimage prove it. Do not claim what's already in the school books that lead us to dead ends!!!! Physics need rewriting !!!!!!!!! History TOOO!!!

Have you ever been to the California Science Center? Check out this video of a 40lb 5 year old girl lifting a 3 ton pickup truck. kzfaq.info/get/bejne/pbp5oLOHrdGum5s.html Nothing mysterious here.

People that will believe secondhand accounts from sources that can't be confirmed seem pompous to me. All these tales of he/she said they saw this or that but never any names.

Well stated and exactly. Just another cover up of Ed's actual abilities...this is NOT scientific proof. I'm quite sure how he did it, and I myself as well as others are now working on real world analysis and replication... :)

I beg to differ. As a mechanical engineer who has worked with electric motor design for decades. As a lover of stone masonary. As an owner of a 16 hp version of the engine shown. Who moves 40 ton machines often using simple rollers. That sheet of steel will slice that limestone like butter. Two engineers. One using engineering to do magic. And one showing it isn't magic. Just sound engineering.

@@randytucker3083 Beg All you Like, you haven't made a 9 ton door that you can push with you little finger that has a hole drilled through its centre with such precision that they have no clue how Ed did it. And couldn't replicate it....and when they tried to 'service' it...after 30 years of trouble free movement...they broke it.

+Dmitri Soroka (Metallolomka) It actually sucked me in and when I saw all the misnomers I had to try my shot at it and It came to me. thats all I can say. Thanks Scott R

While he makes many valid discoveries, it still doesn't explain how he moved it from where he originally built it, to where it stands today. Also doesn't explain the massive doors you can open with one finger, with the exception of one which was knocked out of position. As far as I know, they still haven't been able to restore it to the way Ed originally set it.

Yup its a little barbaric but I am making GOOD head way on the real process to the point where i am almost ready to go to Florida. Coral Castle Nut Roadtrip. Any takers. ?? hope you are well brother. all that mathematics you are digesting will come in handy later.!!!!! Scott

Tim vickers Indeed!😊

Agreed! It was very distracting!

The music is terrible in this application.

+Andrew Holdaway I know right? Thank you much for that. you have no idea how much crap I get though. I don't know anything cause vibration is the key, or sound will levitate rocks. I just have to duck.

+Andrew Holdaway Xln't job. However, disappointing. I came to see magic ice cream cones that levitate stones. :-(

Danny Boy 🍦I know, floating stones and ice cream, my favourite 😁 too.

+Made by one man Wow..is this even you? I was gonna say how fascinating and thought provoking this was....and then " I know right"? In any case, Thank You for posting. A highly entertaining and educational video . The mechanics and physics were excellently described and kept my attention throughout. In any case, Thx for posting and would like to see more~

Thanks. I am sorry your post didn't get to me till now. I though we conversed but sometime you tube drops things. I Don't delete comments. someone else does behind the curtains. (i think) Scott R.

Thanks Much. I HAVE read both book a number of times each. I have also had strange "parallels" as many others have had with the girls, boys etc. and magnetic universal potential space/time correlations. As for Magnetic current I have actually done the calculations with declination and the change in the earth magnetic field with regards to NASA's actual modern measurement of the shifting North and South poles. Also Ed discoveries could be related to maxwell and others so on that?::::::::::: Someday I will write a book and there will be a "sub appendix" for the "potentially enlightened" open minded folks including leyline theory, anagrams of alien orientation, and a few "contraversial" spiritual subjects and commentary etc. That will probably be about the book in every home.

@@madebyoneman5006 I had the chance to visit the castle one time myself - you have put all mystery in my mind to rest! Amazing work and dedication sir! You're a hard-working man.

Thank you. I will update what few things are wrong like the boxes had sawdust and engine oil to preserve the poles not Batteries. Ooops.

Great reply. I've been to Coral Castle several times. Almost everything in this video's on point, except I don't remember seeing a reciprocation engine or a locomotion attachment or any heavy machinery. I think he was using the generator to do a couple more things that's missing in this video

Not to take anything away from Ed by any means, I'm a huge fan, but it's doable without secret methods. I move monstrously huge, heavy things frequently, and I do it alone (and at night usually) because other people get in the way, have a horrible understanding of force, and are a liability. So much easier to do work like this alone if you are so inclined.