EEVblog

No video

EEVblog

Рет қаралды 161,046

10 жыл бұрын

An open hardware iPad Retina display adapter for Thunderbolt and Display Port
www.kickstarte...
Treadgaming, gaming while running in a treadmill: treadgaming.blo...
A documentary video on the origins of Hewlett Packard archive.org/de...
engineersbench....
masaradio.arkku...
Cypress USB 3.0 development kit: www.cypress.com...
Visionect - A complete 6" e-ink display waterproof WiFi enabled tablet development kit: www.visionect.com/
BareDuino - worlds smallest Arduino compatible board: www.seeedstudio...
ERIC Low Power Encrypted RF Radio Modules www.lprs.co.uk/...
Forum: www.eevblog.com...
EEVblog Main Web Site:
www.eevblog.com
EEVblog Amazon Store:
astore.amazon.c...
Donations:
www.eevblog.com...
Projects:
www.eevblog.com...
Electronics Info Wiki:
www.eevblog.com...

Пікірлер: 391

@90SecondsofAviation 10 жыл бұрын

12:05 YES ! TEARDOWN OF WORLDS SHITTIEST CAMERA ! Thumb up so Dave can see !:D

@dazaro3 10 жыл бұрын

Camera teardown.

@BillyNoMate 10 жыл бұрын

Camera teardown.... with a hammer! Hammer down Tuesday! ;)

@CoolDudeClem 10 жыл бұрын

Do it! I like the idea of "inside the world's shittiest, cheapest camcorder!"

@EEVblog 10 жыл бұрын

21 thumbs up, guess I'd better do it! It is Teardown Tuesday today...

@icebrodie 10 жыл бұрын

EEVblog You'd better. We've seen lots of high quality on your channel, let's see some low quality. I've personally been considering doing a teardown series of dollar store electronics (I blame a reviewer in the UK named Ashens.)

@sonicase 10 жыл бұрын

EEVblog open it with a hammer

@thatguyb3rt 10 жыл бұрын

EEVblog You did the cheap flip phone, time for a cheap camera. :D

@ClosetYeti 10 жыл бұрын

sonicase Then burn it when you're done. Leave no evidence of the atrocity..

@ScramblerUSA 10 жыл бұрын

Camera teardown? Yes. Playing with eRIC? Absolutely! Looking forward to see them both.

@MysticalDork 10 жыл бұрын

I love that spring socket design on the eRIC modules, very clever.

@codebeat4192 5 жыл бұрын

The springs are a result of the creative usage of test-loops

@brothyr 10 жыл бұрын

you think maybe the 'this might take a few seconds' was referring to the time you need to touch the screen for?

@linuxb0y 10 жыл бұрын

Thumbs up for a teardown on the crappy camera.

@electronicsNmore 10 жыл бұрын

I enjoy all of Dave's videos, but my favorite videos are the "mailbag" videos. :-)

@cipmars 10 жыл бұрын

The eRICs deffinately desirve a follow-up!

@digimbyte 10 жыл бұрын

Hell YES I wanna see inside that cheap camera

@Cookiewott 10 жыл бұрын

Rest in Pieces Wireless Mike.

@redtails 10 жыл бұрын

rip in piece

@aserta 10 жыл бұрын

So the shitty camera works better than the expensive tablet. That's funny as hell. Now i'm undecided which we should get a tear down of. The copy/pasta system out of a phone = camera or the "leading" industry tablet.

@ianc4901 10 жыл бұрын

"Drier than a dead dingoes donga" ! Love it !

@stevec00ps 10 жыл бұрын

It says "please CONTINUE to charge" so I bet it needs a full charge first time. Also, at least one of the spring connectors on the eRIC (bottom left) is bent away and not touching the half moon pad.

@FutureJPL 10 жыл бұрын

Hey Dave, I would love to see you play around with the RF recievers, I feel like there is a lot to learn there and it could be a lot of fun. Thanks for taking the time to make all of the videos!

@Razor2048 10 жыл бұрын

Camera tear down ftw

@robertwilliams204 10 жыл бұрын

Dave, MD is Maryland here in the states. Love the mailbag videos, keep them coming.

@miksu103 10 жыл бұрын

You need to tear down that camera!!

@ClosetYeti 10 жыл бұрын

Should be noted that the Visionect thing has a 239EUR DIY option. Check the site for details on that, and check out the banner image of dude being bored with it. That's great stuff.

@sghost128 10 жыл бұрын

"Sorry eRIC, killed ya mate."

@XxPhasemanxX 10 жыл бұрын

I definitely want to see a tear down of the camcorder!

@MichaelKathke 10 жыл бұрын

Visionect shows us why every complex electronic product need at least one button - the reset button ;-).

@WattSekunde 10 жыл бұрын

or a battery door...

@TheHuesSciTech 10 жыл бұрын

I'd love to see more about that radio module!

@mokmo23 10 жыл бұрын

Is it just me or was he just tappnig instead of touching that e-ink tablet ? As in "hold to start"

@thebigirishpotato 10 жыл бұрын

Love to see the Eric stuff in a new video

@sharplevision 10 жыл бұрын

Hoping it will get reviewed - although as eRIC's makers we are always nervous about live reviews. Dave is amazing to watch though.

@Patchuchan 10 жыл бұрын

That eRIC chip seems interesting.

@midwestrenewablesllc 10 жыл бұрын

Would love to see more of the RF modules.

@marioman971 10 жыл бұрын

Guys, 750 for the professional dev kit; 279 for the standard (sells for $349 over here in the U.S.)

@1ManWrenching 10 жыл бұрын

Regarding the 6" tablet that won't turn on... Don't turn it on, take it apart.

@HighTechLab 10 жыл бұрын

I would love the oscar, I am really trying to get into electronics deeper and a surface mount kit would really help!

@ISmellBurning 10 жыл бұрын

Gutted that E-Ink device failed. Really wanted to see a little more of that.

@samcash6487 10 жыл бұрын

Hey Dave, I went over to their website to order a copy of that HP Origins DVD and found this copy right agreement. IMPORTANT: Usage Right statement As a reminder, the contents of this DVD are owned by Hewlett-Packard Development Company, L.P. and protected by U.S. copyright laws and the copyright laws of other countries. The shipment and/or possession of this DVD does not provide you with the right to reproduce, edit, modify, alter, prepare derivative works, publicly perform or broadcast in any medium, or use in any context, commercial or otherwise, this DVD. This DVD is intended for private viewing only and this DVD may not be sold.

@JacobErtel 10 жыл бұрын

Try holding your finger on the eink tablet longer. It could be a lock screen to prevent accidental power ups.

@whitcwa 10 жыл бұрын

High end video cameras use a SMPTE-standard Lemo connector for fiber and power in one hybrid cable. The Neutrik Opticalcon is a similar connector which costs a lot less, so we use it with adapters instead of the Lemo . The Opticalcon is a lot easier to service, too.

@spectrHz 10 жыл бұрын

oh yes! a teardown sounds awesome!

@AJMansfield1 9 жыл бұрын

MD is Maryland, not Missouri.

@lourendo01 7 жыл бұрын

Anson Mansfield it was MO not MD

@rickymac54321 6 жыл бұрын

SweetPoontang He said MD

@strangersound 8 жыл бұрын

That dollar should work in the bill scanner you did a teardown on. :)

@MurderCrowAwdio 10 жыл бұрын

Please show us more of the eRIC!

@GNiessen 10 жыл бұрын

Yes, show the video camera.

@jix177 10 жыл бұрын

Would like to see more on the Eric.

@inrit 10 жыл бұрын

Would love to see a teardown of the camera, must be some high quality work in there!

@opablo_gm 10 жыл бұрын

that eRIC modules could be great for a practical example of the usage of an MDO while debugging a problem in a device with digital and rf channels... maybe you can lower it's VIN right where some of the digital signals generate problems in the rf channel and try to use an MDO to discover the events relationships/correlation

@veritywoodbridge8210 8 жыл бұрын

Hi Pablo. Did you get a chance to try the eRIC modules?

@Jeroenz0r 10 жыл бұрын

also, YES I want to see that teardown!

@therealfox 10 жыл бұрын

Hope to see more from eRIC Chip and also want to know if the e-reader has finally booted?

@michelle5for 3 жыл бұрын

HP Origins - "Only goes for 26 minutes unfortunately" - That crazy aussie guy

@originellerNickname 10 жыл бұрын

I would really like to see the experimenting with eRIC... As I am quite a beginner in EE Projects, and I never dared to do RF stuff :)

@FilmFactry 10 жыл бұрын

Please open that beautiful camcorder!

@LordXelous 10 жыл бұрын

Defo play about with those wireless transmitters!

@veritywoodbridge8210 8 жыл бұрын

Hi Lord Xelous. Did you get some of these transmitters?

@LordXelous 8 жыл бұрын

No, but you can see what I have been tinkering with on my KZfaq & Twitch :)

@mrjackdavies95 10 жыл бұрын

I would love the oscar boards!!

@SatyajitRoy2048 10 жыл бұрын

Sagan will love the camera to start his own tearing down videos.

@CrapItWorked 10 жыл бұрын

MO is Missouri, where I suspect the package came from. MD is Maryland.

@bitluni 10 жыл бұрын

did you try to touch AND HOLD for few seconds? could imagine they are polling less frequently in stand by.

@EEVblog 10 жыл бұрын

Yep, pretty sure I tried that.

@mazo128 10 жыл бұрын

EEVblog isnt it looks broken there is like a ghost image after first startup attempt

@mazo128 10 жыл бұрын

EEVblog but swiping might work :D

@marssheep1264 10 жыл бұрын

maybe it needs a woman's touch :D hahahaha

@alexsimonetti8522 7 жыл бұрын

Dave, that video camera on about 10 minutes seems like a good device to test the AAA batteroo sleeves that you'll be getting in a few days.

@kcoRwobniaR 10 жыл бұрын

Yes Dave ! Please its will be a treat !

@TimMcQueen 10 жыл бұрын

Hey Dave! I'd like to see more on the eRIC product.

@mick7sp 10 жыл бұрын

Yes more then the Little eRIC tear down(apart) that was done. LOL.

@Titan_Logic 10 жыл бұрын

Camera and Visionect tablet teardown. Also eRIC module performance test and review Please.

@tech4pros1 10 жыл бұрын

those cheapy camcorders are good for quadcopter fpv, as they are so light but cheap, yet reasonably tough, have a video output and can be found in thrift stores etc...

@MarianMoise1974 10 жыл бұрын

In depth review with that camera please! and a tear down of course... with a hammer.

@zaprodk 10 жыл бұрын

19:30 now i know why the optical mouse part is a little wonky - he needs to remove the protection tape before use...

@lennertve1997 10 жыл бұрын

The LED lamp isn't a genuie phillips one, its just an old one with some diy'ing in there ;)

@SetMyLife 10 жыл бұрын

Camera teardown using your Dremmel!

@spacepirateivynova 8 жыл бұрын

touch and HOLD to start. It's made so you don't accidentally turn the thing on with a simple tap. Touch and HOLD.

@nxxxxzn 10 жыл бұрын

Post guy delivered me a package while I was watching this.

@Pixilshooter 10 жыл бұрын

I vote for POS Camera teardown.

@gamccoy 10 жыл бұрын

Dave I would love to see a review of the eRIC modules.

@BFanist 10 жыл бұрын

Camera pissed him off :D

@stevecreasey3737 10 жыл бұрын

Hey Dave, Would LOVE to see the RF modules demoed :) Thanks!

@veritywoodbridge8210 8 жыл бұрын

Hi Dave. Have you tried the eRIC modules at all yet?

@JacobJonesy 10 жыл бұрын

You should do a super long video about those radio controllers

@lion03 10 жыл бұрын

ADNS 9500... Had the misfortune of dealing with it's older brother the ADNS 9800. It seems like every laser mouse is using some kind of ADNS family sensor, including mice that were made in the last year but the funny thing is that Avago stopped manufacturing the ADNS family few years ago.... BTW, they forgot to remove the tape from the lenses of the sensor

@hendrikhendrikson2941 10 жыл бұрын

I'd like to see you fiddle with that eRIC. I'm really curious!

@erwinvb70 10 жыл бұрын

Please do a teardown of that camera, that would something I would definitely take apart.. just to see if I would be able to send a composite video signal to that screen. The thing will probably have just 1 IC to control everything but would be funny to take apart anyway and then throw it away.

@tomshirvo1 10 жыл бұрын

Would really like to see you work with the eRIC products. I currently use XBee modules and they aren't as easy as serial in and out.

@veritywoodbridge8210 8 жыл бұрын

Hia. Did you manager to get your hands on some eRIC modules?

@ardian3141 9 жыл бұрын

Do a video for the eRIC please!

@DjResR 10 жыл бұрын

The camera has the same video resolution as my Optio E30 :D Keep up the good work. I'm getting interested in this eRIC chip.

@nathanpc 10 жыл бұрын

Eric Wasatonic uploaded it to KZfaq and the Internet Archive: HP Origins

@ProBooKKK 10 жыл бұрын

Camera teardown. Hell yeah!

@1337NoMad1337 10 жыл бұрын

Perhaps this Tablet is a dev version and you have to build your own OS with an SDK and flash it yourself?

@AdamSkubel 10 жыл бұрын

I would love to see a video on those eRIC modules, they look really neat. Plus, don't you have a 1GHz scope to test out now?

@winstonsmith478 10 жыл бұрын

Only US$1043 for a 6" epaper "development" tablet that doesn't work. What a deal. Tear it down. Also interested in seeing the eRIC modules used.

@xXxbastek 10 жыл бұрын

tern down by hummer

@winstonsmith478 10 жыл бұрын

Bastek Master ???

@A0Felix90 10 жыл бұрын

Finaly a mailbag!! :)

@treadgaming 10 жыл бұрын

By the way Dave. Thanks for the "tear down". :)

@codebeatr 10 жыл бұрын

Please get deeper into the eric thingie.

@mattmoreira210 10 жыл бұрын

Poor Wireless Mike...

@RobThePlumber 10 жыл бұрын

I want to see how that piece of sh!t is crafted!

@Elfnetdesigns 10 жыл бұрын

With the good ole Chinese love and care we all have come to know.

@spacepirateivynova 8 жыл бұрын

I guess this is WAY too late now... but I have a use for the displayport to retina driver :D

@maxbutton9996 10 жыл бұрын

The teardown for the camera should be you throwing it on the ground.

@27613James 10 жыл бұрын

Hi Dave, PLEASE use that sharpening stone I sent you few months ago, that swiss knife is very dull! regards James

@shamanjoe 10 жыл бұрын

Cheers Dave! I'd love to see a full length video on the eRIC, as well as more of that sexy spring socket. Also, a teardown of the world's shittiest video camera sounds like fun!

@account3r2 10 жыл бұрын

Yes, please do tear down the crappy camera. And as I'm sure others have said, let the tablet charge all the way, and/or try holding your finger on the screen instead of just tapping on it.

@Goesreallyfast 10 жыл бұрын

If it's not already spoken for I could use the Oscar pcb's!

@sleepib 10 жыл бұрын

I'm guessing you need to plug the tablet into a PC to configure it. The "power saving" disappeared, but the "disconnected" did not.

@afroninjadeluxe 10 жыл бұрын

Thank you for charging me :3

@imtherealblueberry 10 жыл бұрын

try press on the display of the e-ink display for a few seconds and see if that works? just like when you start a mobilephone you have to hold down the power button for a few seconds :)