I use this scope regularly for my master's project and I have to say that this piece of equipment is intuitive and easy to use!

Keep up the 1 hour+ reviews. They are awesomely detailed and entertaining. Thank you very much Dave.

Rigol should thank you for convincing me to pick up one for myself. What a great little package this one. And lol at your frustration with the software, I think we all wanted to lie down after that nightmare

Great video Dave. Had my 1054 for almost a year now. This video has shown me stuff I didn’t know it could do. I usually just run simple tests on audio gear. Nice to know about all these features as I learn. Thanks for the great videos and sharing your knowledge. Just an old guy trying to learn a few new tricks. Was in the machining/mechanical engineering trade for 30 years, now I am learning more about my lifelong hobby in electronics.

Thanks Dave! What an excellent review. I've just bought a DS1202Z-E and I think this will help me to have a more comprehensive insight about what else I can do with it when arrives.

This was one of the best reviews of the Rigol I could find & for any scope on Utube, for that matter. Sincerely, Thank you! I can't wait until you film a teardown of a crusty headlamp. Now that will be even more valuable. Just as sincerely, but in a different vein.

I see that if you buy this scope today (nov. 2018) the extra features are already unlocked from within the factory, without extra cost.

this should arrive at my place in about 8hrs, first scope, im really pumped! I was going to go with daves advice to grab an analog scope on ebay but for the price (+ ability to soft mod) it was hard to invest 100+ in a scope i have to do math on vs this. Thanks for all your excellent factual and sometimes entertaining (multi-meter destruction) videos Dave!

Thank you very much. Two days ago, I was in one step from another... Today I now what I need as my first oscilloscope!

Appreciate the guidance and in depth review - still trying to pick between the plethora of choices out there for digital oscilloscopes and this has been a really great channel!

Thanks for the review. I ordered mine yesterday. It is a huge upgrade to my venerable old Tektronix 465 20MHz scope. Not to mention much smaller form factor and feature pack is much better on the Rigol.

Love the review, this is my first time posting and thought I would say thanks. Just picked one of these scopes from TE to replace my monochrome tds1002. Can't wait to to mess with it.

Another great video Dave. I purchased this scope today expecting delivery tomorrow, can't wait. I myself am a hobbyist so think it will fit the bill for my purposes.

Thanks for putting so much effort in this review and series. What a great source of information! I wish all product reviews were as comprehensive as this. Big thumbs up!

Gees, I've had this scope for over a month and only today did I discover that, with the latest firmware update, they added FILTERS! Low pass, high pass, band pass and notch filter. It's under Math -> Operator and all the way down in the menu (doesn't show until you go all the way down). It is only software filtering though. And at 35:40 Sin(x)/x can be switched off if you have 3 or more channels turned on. You can see at 36:12 that the switch is no longer grayed out because Dave switched on all 4 channels.

Dave: thanks for the videos. They are very educational and helpful.

Bought a Rigol 1054Z in Jan '22 off the back of this, a few other of Dave's videos, and his forum (which detailed the way to "enhance" the scope 😏). I bought a BitScope some years ago and it's "OK" for VERY basic use but not a good platform for education. In contrast, in the 11 months I've been using this DSO I've learnt SO much about primarily because of it's performance and it's vast support online. To this day, I'm still ploughing discovering useful features. Very happy with the purchase, cheers Dave!

Just bought one (on the advice of a friend) and it came with all options officially installed

It's on my wishlist. Thank's for the Aussyum video.

Great Review, I bought one! $349 shipped. new in box. I was looking for a new digital color scope and for the little extra over the real cheap ones this is the schnizzle. Thanks I have really been enjoying all of your vids. I like the vernacular I have a bunch of new stuff for the guys at work.

Brilliant review! Thanks a lot!

Revisiting this video. When I bought this scope, my eyes were very good, being nearsighted. Now, a handfull of years later, its more of an issue. Doh! Good call, I didn't pay enough attention to your feedback on the size of the letters/numbers.

Doubt if Rigol is making much money off these, but it's still brilliant. They've created a product that almost every electronics student and hobbyist knows about and wants. Sell them their first one they'll come back for more. Long term planning by Rigol.

Super, thanks Dave.

Another Dave's fan. I laugh a lot with your videos. You make electronics funny XD. I'm a hobbyist and today, after reading millions of pages and looking tons of videos, i bought mi first scope: a RIGOL DS1054Z. Thanks Dave !!! The only complaint: the fan is very noisy. I love to work in silence but this is like to be in a hot summer with a fan near the head (but withouth the sweet breeze in the face)

This scope is absolutely worth it, the thing has such massive community support which is vital when you're a total newbie, if you buy those weird chinese scopes with seemingly randomly generated brand names you're lucky if you're even going to find a single search result that isn't the sales listing itself so you would struggle with finding answers to anything since every scope is different.

Well, they apparently made quite a nice piece of equipment as I bough it recently after 6 years from this video. Although I found a 2 channel version of this exact model, which I am not sure why it exists, LEDs for the 3rd and 4th channel buttons still visible while booting. I am surprised by the functionality of the device. Couple minor frustrations I had were; no dedicated "back" button, kind of soft encoders, overly sensitive multipurpose button while wandering in the menu, not being able to hide the menus, and the fact that for whatever reason they have both up-down arrows on left side together at the bottom, and one on top and one on bottom for the right side. Although I haven't used it much so far, I am perfectly happy with the device.

I'm sold! I want one of these.... Only one problem... I have no idea what the hell I'd do with it, other than use it as a very expensive voltage meter. But that was the best review I've seen in years... Had me laughing not to mention I stayed awake for the whole thing. I'm just a beginner with Arduino and I'm just trying to learn how it all comes together. But seriously that was awesome!

Looking at this review, I came to the conclusion that this device is underpowered, processor wise, and rather sluggish as far as display is concerned. But, I've bought one nonetheless because of the outstanding bang-for-buck ratio. It will replace my UniT UT-81B scopemeter very nicely. Thanks for the honest review Dave.

I remember back in the early eighties I payed 400-500 USD for a 4 Mhz analog B&K scope with 2 channels. For the same price this scope is awesome!

Lots of mouthwork in your videos ...

grate video i bought one :) finally it was in stock people grab it off the shelf before i can get one

I just bought this scope, with all the options officially enabled and the 16-channel digital probe. Yeah it's a five-year-old design. I got the 100MHz version, DS1104-Z, to replace my 35-year-old Tektronix 2246. I love that scope, which weighs approximately a half ton. So far I'm very impressed. It does take some time to boot. I would have liked an ESD wrist strap grounding point, but I'll make do. The controls are taking some getting used to, since they are shared by all four channels. Some of the on-screen menu items are, shall we say, not very well translated.

Nice review. I have a 2-channel Hantek scope that serves me fine for the moment. If I ever need to upgrade, then your advice is valuable.

Very well explained 👏 Thanks

The software frequency counter issue Dave talks about at 55:15 seems to have been resolved. At least, I'm having no such trouble with it on my scope which I bought a week ago.

Multitasking: Feature review AND bug finding at the same time. Nice! I wonder how soon after this video we will see a new firmware update ;-)

Hi, I've noticed on your recent eevBLAB videos and this one there is different capitalisation, this one has a capital B and the eevBLAB has it opposite to normal EEVblog. Just thought I'd mention it. :) Nice review

I have watched your video a lot， It turned out the producers is right in my city. God, damn it! I have to go check it before buying one. Just about 20 kilometers from where I live.😊

Best, most comprehensive review I have seen! BUT what is the upper limit on the hardware frequency counter?

Thank you I'm gonna get one

This scope is the type of thing I would expect hobbyists and schools to buy, my high school electronics class owns a atten ga1102

I like Dave's channel a lot, but it almost feels like this video is an advertisement for the scope. Even so, I'm sold. I bought one, unlocked it's features, and set it up. It's not perfect, but it's really slick.

Just received this nifty scope. I use it for low frequency audio applications only (up to 20kHz), so 50Mhz is already an overkill. 4 Channels is nice to compare audio signals at different stages of the circuit. FFT is good for tuning EQ's. Couldn't care less about PC connectivity. What's not to love?

Hmm i can see this vid is listed on my "subscriptions" tab...and therefore i tuned in;) What a massive 78min video, Dave.... Sorry to say this, but you simply can´t compare a $400 DSO features along with DSOs within the doubled pricerange. I think we need to give rigol a biiig thanx here, for this scope with respect to its PriceTag....:) I bought my 2ch DSO about some 5 years ago for nearly the same price. ( i only wanted that FFT so badly) That´s how technology moves on. Let´s see what´s up within the next 5 years. As i keep watching your channel, and see what they come up with as time moves on;) What a cool help menu, in my scope is more or less useless... They put a lot of work in it, well done RIGOL! This Pass/Fail feature (45:50) is a killer for me, as with something like that, i can run an amplifier without having my eyes on the screen all the time, as the scope tracks it, and simply can shut the whole thing down via a little DIY addon to that rear BNC... They done a cool scope but an awful job for that "addon" PC software (1:14:00).... Thanx a *lot*, Dave for this one!

Actually, DS1104Z Plus (MSO ready) is much better at the digital measurements / decoding options, but costs almost $1k. Got one and I'm really happy with it. They improved the firmware a bit, certain glitches aren't there anymore, a great scope IMHO. There's a minor side effect, it takes 1 analog channel per 8 digital inputs (CH3 and CH4 go down for a full 16ch LA), therefore you may only measure 2 analog channels and 2x8 digital channels at the same time.

On one side, I really like the focus on the price here. It matters a lot for me as it would be my first scope. However, as you go through these features I would really appreciate some truth in advertising, ie. when you use features NOT included in the "cheap" price, please say so. Or rather, let's talk the REAL price given the features you're covering so well. Love your channel!

I went for the MSO version. Really nice to get 8 channels of analyzer on the screen as the analog probes.

Great video! Loved “dicking around” and other wonderful Australianisms.

Regarding the trial licenses for features and the small text: The hours for the trial licenses for the extra features (such as RS-232 decoding and the like) are not based on use of the feature but on total scope on-time. So after 35 hours or so the RS-232 decoding license will be expired, even if you had never tried it. While the text on the screen is indeed small, it's not been an issue at all for me even with somewhat poor eyesight. I have moderate presbyopia and even with 2.0 diopter reading glasses and a magnifying glass I often find it difficult to read things like PC board lettering and printing on chips, but the DS1054Z screen has been no problem. This is possibly because it's quite bright, which helps with presbyopia.

Haven't really used a scope since CRT days. I've avoided buying one because of the price and size (mostly size) but I think both of these are coming within range.

The Ultrascope does work over the Network cable as well as the USB cable. But not much speed increase.

I think I’m gonna get me one! I hope it’s a real Bobby dazzler!

I've owned this scope for a couple of months now. While watching this video, I'm noticing that the probes that were included in mine are of a different model number. his were the RP2200, while mine are the PVP2150. Now, comparing the spec sheet to mine, it appears the only difference in defined specifications is the input capacitance. My PVP2150's being "1x: 50pf, 10x: 10pf" his RP2200's being "1x: 100pf, 10x: 17pf", (both with the same +- tolerances.) At first I was concerned they might have started shipping lower-quality probes. If anything, these are better (in specs at least). Though, given the nominal difference, I suspect build quality/usability will play at least an equal role. All said, I am happy with the probes I received. (Thanks for bearing with me. This post was slowly written as I found documentation and considered possibilities. The main point that I wanted to make was that the probes are different!)

Kinda late here, but I just bought one of these for My-First-Oscope. Bookmarking this vid to come back to as I learn how to use it better. Good video quality & production 🍆🍆

best video ever

Minor thing, at 15:30(ish) you compare the noise to a Rigol 2000/3000 series, while you have an Agilent 3054a on screen... was this a bonus for people who actually watch?

That is a stunning machine for a beginner.. Shoot... it is good enough for a lot of what you use a scope for...

Encoder indent: I actually like the rotary encoders a lot, much prefer them to harder, clickier ones, as the latter are more taxing on the finger joints, which can get kinda unpleasant when cranking a lot of clicks in a row.

Dave, I was about to purchase a Hantek 6254BD 4-CH Oscilloscope with AWG, 250Mhz, 1GSa/s. The Arbitrary Waveform generator was a bit of a nicety but not needed for most of what I do (hardware design for vintage computers). The USB Hantek seemed perfect because it allowed easy screen capture of the waveforms for inclusion in my documentation. However, I stumbled across this video of yours from 2015 and this Rigol for maybe $150 more seems to be light years ahead of the newest Hantek. I'm about to scour all of your videos looking for a newer version of this scope - perhaps you could point me to your current recommendation for such a scope as I am positive that I'd rather get a Rigol. I love your show - the hours I've spent after my heart surgery staring at youtube have been well spent viewing your EEVBlog and that Canadian fellow - Mr. Carlson (I love that guys stuff almost as much as yours... almost). :)

I bought this scope, and I'm still being surprised by it. And every time I encounter some slight limitation I have to kick myself and remember how little I paid for it.

very interested in purchasing ...

I know I'm probably in the minority but I watch your channel and I do not know jack squat about electronics other than what I see here. It would be cool to see you cover some basics, or troubleshoot and repair something from start to finish.

Thank very much for taking all the time to make this. Extremely helpful even for someone with >30 years in the game. As your biggest critic, I intent that as my highest compliment. Please consider going back to this style of video on occasion. Not even experienced people can afford to lose touch with entry level instruments. It's nearly Christmas and I need to help a kid who is stuck with Arduino cancer. What better thing than this scope and one of those Digilent logic analysers?

And this scope is still the best value 4-ch scope on the market! Alan Lowne Saelig Co. Inc.

I replaced the fan of my DS1054z with a Omega Typhoon 50mm (model CFZ-5010S), 8.10CFM, 3700RPM, 17 dBA. Now the noise is so faint that if you don't pay attention you just don't hear it. The scope is not overheating, so everything is ok.

MEM-Depth 24M/12M/6M means 24M for 1ch, 12M if you have 2ch on and 6M per ch if you have all ch on... without this option, it is half that

With the Ultra scope you can click on those boxes in the software and type in values, for voltage and other stuff, but it is slow. You have to give it a second to convert what you input, into its own form. But it does allow you to alter the scope from a computer keyboard. Not great stuff though.

Same with me. I just hate to see the "Software successfully installed" Screen and afterwards you find no Trace of how to start it. It's just vanished in the haze. These guys just wanna make you go nuts. Nevertheless - gorgeous vid about a fantastic scope. just added it to my wishlist.

The Channel colours where chosen to provide the best contrast. First 3 channels are all a combination of two main colours. First Yellow (both green and red sub-pixels at max) Second Cyan (green and blue sub-pixels at max) Third channel Magenta (red and blue) And they needed to find another strident colour anther out of the 3 the blue is the coldest. White will have been another choice but it will have been even closer to cyan than blue. I think considering the choices they made the best choice.

Thank you Dave! Nice Review. But I'm wondering how much these options cost? Like the I²C and SPI options. Would be nice to know...

Maybe the pass/fail numbers are averaged?

osssam sir

I an happy with my 1054z. I do wish the software was open source. I would like to have dBu and dBV along with volts RMS. I bet they would sell a lot more if it was the Arduino of scopes. I do understand that a Python hack could work. Still, open source would allow you to change the font, too.

What about the performance testing video?

I upgraded my 1052E to 100Mhz. It's software, and software is upgradable...

I didn't get a quick start guide with mine. It was factory sealed from Adafruit.

I got the 100Mhz version as a beginner (yeah, perhaps I could have software cracked the 50Mhz but still), and I've learnt more about how to use it watching this than I did with the online help. The RIgol UltraScope software is appalling, and I was grimacing as Dave was installing it. 2 or 3 second screen refresh, it's useless. Other than that, I'm happy. It will do me for a while. PS. The latest version is no better :(

Having the trigger centered at 1/2 the screen is a bit silly in my opinion, most things you usually want to see happen after the trigger, right? In a tek 2232 you can move it to 1/4th or to 3/4th pushing a single button. I'd love to see this feature in the rigols. As Rigol seems to listen to you, Dave, perhaps you could ask them for that?

As a programmer, I wouldn't put up much fuss about the horizontal display/resolution when at picoseconds. It doesn't make much sense to truncate the precision (display). I'd find it more likely to throw me off when/if it would change to seem more relative for the division factor. My two cents, anyway.

I don't really like the cyan and blue channel colors, but I can see the difference... We need a custom ROM for this thing w/ adjustable colors :D

Hat tip, but if you look at 1:12:10 you will see the National Instruments install link in the Start Menu. Windows defaults to "highlighting newly installed programs." Not that it matters since it won't work without right clicking in the other app and loading it there, just saying. The software seems like absolute crud, they need compression I guess or a better custom format. USB or Ethernet should easily be able to handle 800x480 data at real time. Could probably encode the actual wave forms even better at the sake of more processing time. Maybe they just don't have the extra juice though and it's on the hardware side.

Watched the whole one hour 19 minutes video, with the anticipation of you going through the math section. I was especially interested in the FFT capabilities of the instrument. How many points, Amplitude accuracy, whether log is applied to the transform. But unfortunately, you did not say anything about it. 🙁. Otherwise it was a very good video.

Naice your all video am happy sir ( you please helping sir

Having a difficult time on what DSO I am going to upgrade to. I am trying to decide between the 1074Z-S and the 2072A-S Dave... what should I do.....

Can you do a review on the Siglent sds1104x-e? maybe comparing it with the ds1054z

Cannot find the software that you mentioned on the EEVBlog Forum? Can you post a link please

How does this scope compare to the Siglent SDS1104X-E ???

Why are there two PW pre-programmed measurement selections? Is that for breaking down the duty cycles into time vs percent?

If working on vintage audio gear and need to apply 1 KHz tone with 10 dB into the audio line IN of the deck being worked on, How do I go by setting 10 dB value and do I need a special RCA cable to connect from the oscilloscope output to the audio equipment?

Hey Dave, here it is 2018, and I've got a b-day coming up next month, thinking about buying one of these for myself. How do you feel about the DS1054Z a few years on? I still see many positive comments about it, and I know there are some hacks out to improve it's functionality. But as a computer professional, with some programming experience, and a beginning electronics hobbyist, who's already spent far too much on stuff that I'm still not 100% sure how to use yet, let alone how to create anything interesting or useful I want to make sure I pick up a scope that is useful and easy to learn on. Do you think the DS1054Z still fits that bill or is there something else I might want to look at instead?

After I saw the screen capture on my display, I noticed that the LCD on this unit dave has has a very blue tint. You see where they have saved money: Cheap crappy TN LCD. But is a proper IPS panel with same resolution really that much more expensive?

Hi Dave, I am getting this scope and i was wondering which signal/function generator would accompany this scope in range up to 1000$ (US)? I am mostly interested in general repair/test of equipment/components and some hardware design. (Expanding my lab so I am looking for good equipment to advance my knowledge)? Thanks in advance, Dave :) Love your work.

I laughed out loud at 1:12 watching you trying to install Windows software. What I learned is I'm still not going to use Windows anytime soon! Thanks for the laugh at the end of my day.

Weird I had no problems with the scope software. 2018 Puchased though.

36:46 So many scopes; not used to this one yet. First World Problem?

I have a question, does the left side of the housing get so hot after buying the 1054Z?

Sold. Ordered. WOOOOO!!!!

How often does Rigol do firmware upgrades? How likely is it that some of the improvements you suggested, like transparency and font, would be implemented as a firmware update? I do audio engineering, and some of the improvements we get on digital audio consoles with firmware upgrades are amazing - sometimes it is like getting a whole new console.

Very nice video. ¿Can the oscilloscope perform a math trace like: CUSTOM TRACE = Intg((CH1-CH2)*CH3)? The goal is to measure average power using two voltage probes to measure load's voltage in differential mode and an active current probe to measure load's current. Thanks in advance.