EEVblog

Рет қаралды 59,187

9 жыл бұрын

Teardown of the new Siglent 1000X Series Oscilloscope
How to remove warranty void security stickers: • EEVblog #799 - How To ...
Datasheets:
www.latticesemi.com/Products/F...
Logic Level Translation: www.nxp.com/documents/selectio...
Synchronous Pipeline Burst SRAM: www.netsol.co.kr/upload/f_prod...
Micron DDR3 memory: www.micron.com/parts/dram/ddr3...
HMCAD1511 1Gsps ADC: www.hittite.com/content/docum...
AD8370 Variable Gain Amplifier: www.analog.com/media/en/techni...
LP3878 Low Noise Regulator: www.farnell.com/datasheets/189...
ADF4360 Frequency Synthesiser: www.analog.com/media/en/techni...
Blackfin DSP Processor: www.analog.com/en/products/pro...
Madman Muntz: en.wikipedia.org/wiki/Madman_...
EEVblog Main Web Site: www.eevblog.com
The 2nd EEVblog Channel: / eevblog2
Support the EEVblog through Patreon!
/ eevblog
EEVblog Amazon Store (Dave gets a cut):
astore.amazon.com/eevblogstore-20
T-Shirts: teespring.com/stores/eevblog
Donations:
www.eevblog.com/donations/
Projects:
www.eevblog.com/projects/
Electronics Info Wiki:
www.eevblog.com/wiki/
💗 Likecoin - Coins for Likes: likecoin.pro/@eevblog/dil9/hcq3

Пікірлер: 181

@mikeselectricstuff 9 жыл бұрын

You could always hook up to the FPGA JTAG connector and do a device scan to see what FPGA it is

@mikehorrod4367 9 жыл бұрын

I would like to see a teardown of a peice of test gear while sat next to one of the designers. It would be interesting to get clarification on some of the things dave cant answer.

@Jones12ax7 9 жыл бұрын

Congratulations for the #800!

@DejanTesic 9 жыл бұрын

Another osciloscope teardown. Cool. Now I can apply to service osciloscopes. "What are your qualifications for the role?" "Well, I've seen all 800 EEVblog videos, some of them repeatedly." ;-)

@Grimhamhull1 9 жыл бұрын

I often find myself craving a cough to clear my throat when I hear you speak in the lower tones. Maybe it's just me. But otherwise you are a saint for this channel. 10/10. Would subscribe again. Would recommend at parties.

@tkarlmann 8 жыл бұрын

You get a Thumbs Up for the Proper Reference to Muntz! With a photo yet! Dave, you surprised me with that one; I cannot believe you knew of him!

@benadams6332 9 жыл бұрын

Thanks for the quick tour of the inside. It looks good, maybe time for one more scope.

@MrPolymath0 9 жыл бұрын

Cool clock, Dave.

@ChipGuy 9 жыл бұрын

+MrPolymath0 He may have showed that to his teachers in the 80s. Apparently you shouldn't do that in today's world.

@rpriesol 9 жыл бұрын

+MrPolymath0 It is not a clock. It is a bomb :)

@EEVblog 9 жыл бұрын

+MrPolymath0 Where's my invite?

@PatrykDarasz 9 жыл бұрын

+MrPolymath0 I wan`t a teardown of it!

@MrTridac 9 жыл бұрын

+Patryk Darasz I think he did that in one of his live shows.

@BaZzZaa 9 жыл бұрын

Lovely work Dave

@webrosc 9 жыл бұрын

Your sure thats a clock and not a bomb?

@adamadamhoney 9 жыл бұрын

Thanks Dave, you sly old fox, was looking forward to this!

@zx8401ztv 9 жыл бұрын

Very neat unit dave :-) Im supprised how minimal it is, considering all it does.

@FrankenPC 8 жыл бұрын

I love how you peeled off the tamper sticker on a video Siglent will see. Classic Dave :D

@dorota4298 9 жыл бұрын

Thanks for the schematics when discuss parts eg. Micron RAM. Always too lazy to check datasheets myself...

@mRtUnBabY 2 жыл бұрын

Thanks and Recommended for all

@dalekusa 9 жыл бұрын

Also, Happy 800th Episode!

@yaghiyahbrenner8902 9 жыл бұрын

8:37 The Blackfin are used for two reasons, low cost and the abundance of skills in china for that platform (They trade IP between companies as well), the BlackFin (in today's standards) is the cheapest high efficiency fixed point 32bit DSP. I own a BF533 board and SHARC really amazing stuff. Your`e right assuming its the processor used for the Display UI and Management. The processor architecture was a collaboration between INTEL and Analogue Devices.

@EEVblog 9 жыл бұрын

+Yaghiyah Brenner The skills things makes sense.

@38911bytefree 9 жыл бұрын

Excelent vid. Thanks.

@ilanmagen 9 жыл бұрын

Love the Schramart stuff

@vandalest 8 жыл бұрын

@15:28 and @18:56, there is a bunch of NEC UD2-4-5NU relays

@maximilianmustermann8172 9 жыл бұрын

Nice homemade clock! ;)

@Markus0021 9 жыл бұрын

+Maximilian “Interprete” Mustermann Looks like a bomb to me! Run! (jk - this is a reference to the home-made clock bomb scare, but then I thought I'd better add this note for those not up on the news)

@Stefan_Payne 9 жыл бұрын

+EEVblog Looks like not all caps on the secondary side are Rubycons. the 35V ones are definetely NOT rubys, but I can't see what else they could be. Seems that some of them are also Lelon... PS: nothing wrong with saving a penny on the primary cap. They are most likely the last things to fail. Well at least when your electrical grid is decent and they don't get many surges...

@benadams6332 9 жыл бұрын

They also have a 100MHz version @ $500, would be interesting to see what the actual bandwidth difference is between the two. I doubt there is any difference in the frontend design.

@DoItYourselfMusician 9 жыл бұрын

Should've written your name inside. I kinda like this scope, might have to get one. I mostly do audio so it's plenty good for that.

@hangfire5005 9 жыл бұрын

A Haiku Silly engineer Why do you disassemble that oscilloscope

@BenjaminGoose 8 жыл бұрын

+Jarrod P Yolo Yolo yolo.

@GautamKumarGoswami 8 жыл бұрын

I think it is because you can have idea about its built-quality by opening the device.

@TKomoski 9 жыл бұрын

There appears to be a short between pin 6 and 7 on U32, it's on about time 10:15. Some of the solder work seems to be How Do You Do, thumbs left right on this one Dave.

@mailchaduarygaurav 9 жыл бұрын

+T Komoski a solder ball is sitting with C742 at 17:45. they haven't cleaned the board properly

@TKomoski 9 жыл бұрын

Gaurav Chaudhary No look at time 10:15 and see a possible short on U32 pins 6 & 7

@mailchaduarygaurav 9 жыл бұрын

+T Komoski yes there is solder bridge U32 pins 6 & 7

@TKomoski 9 жыл бұрын

+Gaurav Chaudhary It's a short between Pin 6 - 1B4 buffer input and Pin 7 - Vccb Power on B side of chip, if that's true then that's gotta hurt something.

@svampebob007 9 жыл бұрын

+T Komoski interesting catch!

@berni8k 9 жыл бұрын

That video FPGA might be simply overlaying the menus and text from the CPU over the video coming from the acquisition chip, as for the fast SRAM memory on that one it might be used to build up an intensity gradated image in there.

@DjResR 9 жыл бұрын

Congrats for 800th video. One question, what are the SMD LED's on the PCB for?

@EEVblog 9 жыл бұрын

+DjResR Status LEDs to show the firmware is running in certain state. a.k.a heartbeat LED. Usually for development, and often left off the BOM for production to save cost.

@jaa93997 9 жыл бұрын

factory testing / calibration maybe? J16

@necessaryevil8615 9 жыл бұрын

Maybe they use Rubycon on the secondary side because the capacitors at the secondary side are onder more stress, or maybe the price difference is not that much.

@TheAmmoniacal 9 жыл бұрын

Seems like Siglent has potential!

@Bradman175 9 жыл бұрын

Siglent is pretty neat! I have one and it does a fairly good job. The only issue is when adjusting the level (not the scale on how large) the values tend to shift and idk why.

@JoannaHammond 9 жыл бұрын

Really wondering what is the output on that mini connector on the board. Any chance of probing it???? :D

@brutester 9 жыл бұрын

There should be a Wave Gen on bottom side, shouldn't it? One reason to remove the flat flex cables and check if it is populated ;)

@coondogtheman 9 жыл бұрын

I've noticed that many of these new scopes have USB ports in the front. Can they be used to load games on like DOOM. I saw a video on here where someone was playing Ultimate Doom on a scope but this scope ran a stripped down version of windows. Windows CE I believe. Would it be possible to display HD video on the screen?

@FrankenPC 8 жыл бұрын

+1000 Dave for the Errol Flynn reference.

@blueslayer99 9 жыл бұрын

I'm pretty sure that state diagram at 13:20 can be used for human transmutation.

@freddykrueger5503 8 жыл бұрын

+Infinite Zero some guy got carried away drawing circles

@SirBunghole 9 жыл бұрын

For a Siglent, its not half bad. The Rigol is still the better built cheap scope.

@JoannaHammond 9 жыл бұрын

I noticed that some of that gunk was covering the vent holes on the caps. Could that have an effect on long term safety if they ever started to fail?

@sknt 9 жыл бұрын

6:24 I guess it is not the completely finished and polished version.

@piwex69 9 жыл бұрын

Dave, could you please publish the home-made clock schematics? As it was odd 30 years ago, I wonder what you had used inside... From the milliseconds part, I assume it was not a popular asic job. And remember not to put it into Sagan's school's bag...

@godzil42 9 жыл бұрын

Oups, at 18:11 there is a nice soldering problem on the bottom of C742, look at that nice ball of solder :)

@padman81 9 жыл бұрын

can you give us a tear down at the clock

@DjResR 9 жыл бұрын

+cralx2k When you upload the video on KZfaq, it processes it and while it does, only 360p version is available. I'm watching it 720p60 right now. Also your HTML5 player may cause the problem.

@marceltimmers1290 9 жыл бұрын

Hi mate.Spoke too soon, you did burst that bubble open. I thought that since it was at a high premium, you would not dear to open it up. Well done.

@costyytsoc 9 жыл бұрын

i wouldn't be so quick to diss that lelon brand cap, i haven't seen one that's failed yet, and i've seen some failed caps

@GeorgeTsiros 9 жыл бұрын

Doubt the fan is controlled. Doesn't look like it, at least.

@Leonelf0 9 жыл бұрын

Threadlocker practically guarantees metal inserts because it uses a metal-ion reaction, binding two metals together

@stumbling 8 жыл бұрын

+TheTrueM3ga What is that stuff? I have seen it on many screws but it doesn't seem to do anything? Dispense with the facts! :P

@Leonelf0 8 жыл бұрын

CowLunch it "glues" the screw to the thread. This makes the screw immune to vibrations, so it can't loosen. Consider a CD Drive. The laser and the screws will be glued to the frame, because the laser (etc) will vibrate, which could loosen screws. Or quadcopters. The motors will be screwed on with threadlocker, so it doesn't fall apart after 2 hours of flight^^

9 жыл бұрын

18:34 - look at the solder blob near/under C742 capacitor, looks like some disaster is waiting just behind the corner :)

9 жыл бұрын

+Piotr Szarański Ouch, 10 seconds later Dave just saw it in his video :(

@korytnacka7english 9 жыл бұрын

What is that black stylus or something that Dave uses for pointing at things?

@korytnacka7english 9 жыл бұрын

+Korytnackaseven English Does it have a specific name or is it just a stylus?

@ddbrosnahan 9 жыл бұрын

With the RF antenna connector, could this unit do some I/Q deciding?

@ddbrosnahan 9 жыл бұрын

decoding

@rich1051414 9 жыл бұрын

Well atleast they didn't use capxon. I honestly don't see why they would use that one lelon brand input cap unless only a specific attribute(like longevity) was important, and having low ESR didn't matter. Surely that one cap wouldn't make a lot of difference on the manufacturing costs. That was an awfully pretty power supply to be tainted by a single cap for seemingly no reason.

@theslimeylimey 9 жыл бұрын

You can see where they spaced out the top V dies in the press brake too much to bend the last sides of the shield up. That's pretty sloppy but I guess nobody is supposed to see it. Except us :)

@cralx2k 9 жыл бұрын

David, why video quality is only 360P?

@ernststavroblofeld1961 8 жыл бұрын

What is the best oscilloscope in the world?

@johnnyjohannesson8533 9 жыл бұрын

Almost shit my pants when the weird sounds started at 26:04... believed i had e pigeon in the room..

@isaiahash9697 9 жыл бұрын

lol

@GautamKumarGoswami 8 жыл бұрын

Between Siglent 1000X & Rigol DS1054Z, I think built quality (inside & outside) is better in Rigol DS1054Z. Like to know what other viewers think on this aspect.

@mauricespelman6608 9 жыл бұрын

Is there any good hobby grade waveform generators under $400?

@Bradman175 9 жыл бұрын

XR2206 sample circuit inside the XR2206 IC data sheet. Warning it is self assemble. Costs about $50.

@tinybrute1262 9 жыл бұрын

I'm your first you were on this video

@AdversityZone 9 жыл бұрын

@ 17:21 above the text C742 there is a solder ball

@TKomoski 9 жыл бұрын

+Adverse Effects Look at time 10:15 and see a possible short on U32 pins 6 & 7.

@fohdeesha 9 жыл бұрын

aw, I'm incredibly sad with that amazing lab of yours you didn't spend 5 or 10 minutes hooking up a spectrum analyzer to that rf test port. even if you didn't have that specific connector I've seen you rig up way worse :) maybe in another video?

@EEVblog 9 жыл бұрын

+Jon Sands I'm a lazy sod

@TKomoski 9 жыл бұрын

+EEVblog Yes I see that, you can't even check if there is a short on U32.

@michaelhawthorne8696 9 жыл бұрын

+T Komoski What's your problem? (see my last comment to you) If you don't like Daves' approach why are you here?

@fohdeesha 9 жыл бұрын

+EEVblog I can understand that! I'm just happy you're doing these videos in general! Any guesses as to what it is after checking out the driver chip area? Maybe a way to check the scopes reference at the factory?

@thefamilyman 9 жыл бұрын

you use to see the exact same style of gold QC stickers on old Japanese products from the 80's. I'm guessing that the Chinese think that they're good because the Japanese used them but they're about 3 decades late.

@spikester 9 жыл бұрын

Threaded brass inserts on a cheap scope yet a $600 Fluke 289 DMM has to use cheap plastic self-tapping threads.

@userPrehistoricman 8 жыл бұрын

+spikester proof shit happens

@Zetex2000 9 жыл бұрын

btw be carful you got a bomb near the scope

@svampebob007 9 жыл бұрын

+the real illuminati judging by Dave's skin color I can reassure you that it's a knife or a dingo.

@Electroblud 9 жыл бұрын

+svampebob007 That's quite dark humour you got there...

@JoannaHammond 9 жыл бұрын

+the real illuminati Can't be a bomb, it's counting the correct way!!!!! Wait a minute, I wonder why the teacher in the original scenario didn't work that out...... ;)

@SabahAlSabah 9 жыл бұрын

Although the security sticker is intact, but the serial number is exposed. unless Dave had spoofed it ;)

@cricardol 6 жыл бұрын

8bit ADC??? Am I missing something here?

@102819921 9 жыл бұрын

does anyone play along at home?

@remsiux 9 жыл бұрын

There's a ticking bomb at the end!!! Be careful!

@giftcard2462 9 жыл бұрын

800th video!

@friggetyfuck 9 жыл бұрын

Does anyone ever play along at home?

@Razor2048 9 жыл бұрын

With the prices they charge, why can't they just load these scopes with like 4-8GB of RAM? With 4GB+ of RAM, wouldn't it help make it more useful (more samples stored, etc.)

@GoldSrc_ 9 жыл бұрын

+Razor2048 You really need very, very fast memory and that doesn't come cheap. That's the reason modern CPU don't have GBs of cache, fast memory is expensive.

@Razor2048 9 жыл бұрын

+Gordon Freeman they can probably stuff some dual or triple channel DDR4 RAM in there. then have it save as much as it can within its processing time (make it so RAM is not a bottleneck), then for what is remaining, use that for more memory hard processing tasks, or give it support for m.2 SSDs, and then have it use a file system like ZFS. For an oscilloscope, this will allow for more functionality, e.g., long term data logging in the scope, and probably running a few extra applications. If possible, they can also have the scope do more while on standby, e.g., function as a backup SQL server.

@DanielRowe 9 жыл бұрын

Filling and addressing more memory would take more cycles probably. Fine balance.

@GoldSrc_ 9 жыл бұрын

Razor2048 Memory is not everything for an oscilloscope. Pretty much everything has to be made specifically for an oscilloscope, you can't use your average memory and be done with it.

@yorgle11 7 жыл бұрын

This is an old conversation, but for whatever it's worth, I think he may have been misreading the RAM sizes in this video. I think they're bigger than what he said (but they're certainly not in the GB range). I'm definitely not an EE, but I've looked at a lot of RAM IC datasheets, mainly when working with PCs and video cards and such. The 25ns SRAM he looked at appears to be marked as 512K addresses storing 18 bits each, making it a bit over 1MB in size using the convention of 8bits=1byte. Not 128KB. At 10:00, there's a 64MB (32Mx16-bit) Micron PC133 CL3 SDRAM chip. Those same chips can be used in rows of 4 on a late 128MB (single sided) or 256MB (double sided) SDRAM module for PCs. At 13:00, that appears to be a 128MB (64M locations of 16-bits) DDR3 IC. According to the datasheet, the "-15" suffix means it's speed is rated 1333 CL10. That datasheet's usage of the term "Meg" is confusing, but I don't think they meant "megabit" there. The 64Mx16 = 128MB interpretation is confirmed by the top line of the datasheet, which gives the capacity as 1Gb. So it looks like there's ~1MB of fast 18-bit SRAM, 128MB of 16-bit DDR3-1333, and 64MB of 16-bit PC133. There could be another DDR3 on the other side of the PCB in which case the size and bus width would double, but I suspect it's just the one. I don't know about that weird 18-bit SRAM, but both of the DRAM components look like commodity tech. I guess the PC133 is for less demanding functions performed in that other area of the board. I think the advertised sample memory refers to the number of samples it can store and keep indexed, not the literal size of the RAM.

@maultrommel 9 жыл бұрын

the pcb layout is pretty close to the DG2xxx series, now somebody hack it like the DS1,2,4k ;-) /cybernet

@TrainMasterMan 9 жыл бұрын

Tear down of the bomb... I mean clock...

@andrewcassidy1790 9 жыл бұрын

hi dave

@Chriva 7 жыл бұрын

Look @17:37: Capacitor C742. How the hell could they not look for crap like that?! Edit: Doh. He even captioned it later in the video. Should've watched the whole video before commenting lol.

@Special1122 8 жыл бұрын

21:24 funny voice :D

@saintpine 6 жыл бұрын

Whats wrong with the choice of Lelon capacitors. It's a Chinese Oscilloscope producer using Chinese capacitors. Lelon Electronics Corp, producers only capacitors since 1976. Surely they are experts in the field.

@xintian4707 8 жыл бұрын

the board looks hand solder to me.

@Broadcast1Channel 9 жыл бұрын

The finnish ives me the impression that this is a pre-release unit that there sales force have pushed to get sent out to the distributors to wet peoples appetites, and get the pre-orders on the books.

@isenhertor 9 жыл бұрын

shit man... have the game industry pre order cancer infected us already...

@twocvbloke 9 жыл бұрын

The real question on many people's minds though is, can it play super mario? :P

@sbrazenor2 9 жыл бұрын

+twocvbloke With the right firmware, possibly.

@ferongr 9 жыл бұрын

Why would you need permission to disassemble a device you own (I assume you don't care about warranties).

@Tangobaldy 9 жыл бұрын

He doesn't own this device, its on loan.

@TheRealSasquatch 9 жыл бұрын

That's not a clock ...............

@Veikra 9 жыл бұрын

Im a teacher with very low common sense and I can tell you have a bomb on your desk, im calling the army

@EEVblog 9 жыл бұрын

+Veikra Don't be silly, in Australia we have a proper terrorist hotline number to call!

@Veikra 9 жыл бұрын

you should call them on me, cause im terrorizing the whole school when I say bomb for nothing !

@Zetex2000 9 жыл бұрын

How to get free electronics componets: buy something with warrenty void if removed, remove the sticker carfuly, desolder stuff and replace high quality stuff with cheap ass chiense stuff, short something and return it and do it again till your are in jail

@Bradman175 9 жыл бұрын

No.

@juliansuse1 9 жыл бұрын

Every one please be advised, Im in the under 301 club

@kevintopete1049 9 жыл бұрын

Same I was first tho

@joblessalex 9 жыл бұрын

+Julian Suse You should get an award!

@sbrazenor2 9 жыл бұрын

+Julian Suse Please be advised, I'm one of the billions of people on the planet that gives no fucks about that fact. LOL :)

@juliansuse1 9 жыл бұрын

SeanFromPVD What!? really, you don't care? You're probably just jealous that you're not in the >301 club xD

@juliansuse1 9 жыл бұрын

Kevin Topete Good job m8

@Nermash 9 жыл бұрын

Hmm, I would have betted that they used Rui Feng ADC... And for all ya Texans, that is a clock not a bomb :)

@kevintopete1049 9 жыл бұрын

Woah woah woah FIRST!

@DerAlbi 9 жыл бұрын

+Kevin Topete Indeed. *gg*

@kevintopete1049 9 жыл бұрын

+DerAlbi gg

@kevintopete1049 9 жыл бұрын

+markybyeah well these replies are going to get deleted because I don't have time for you

@kevintopete1049 9 жыл бұрын

Who disliked already?

@EEVblog 9 жыл бұрын

+Kevin Topete The serial hater bots.

@markybyeah 9 жыл бұрын

+EEVblog F*cking idiots with no electronic skills disliked.

@Thesignalpath 9 жыл бұрын

+Kevin Topete My video dedicated to the majesty of science has the most dislike of all my videos. Who knows...

@andrewkowalczyk1156 9 жыл бұрын

+Kevin Topete Rigol fanboys probably

@sbrazenor2 9 жыл бұрын

+Kevin Topete Maybe it was Tony Abbott's disgruntled supporters. Right +EEVblog? j/k LOL :)