Teardown Tuesday. What's inside an office photocopier? Dave only needs a screwdriver to find out...
Пікірлер: 540
@frankreiserm.s.80396 жыл бұрын
I am an old TV/VCR repair tech., and today I have an interview for a job to repair copiers. Thanks for the review, you have prepared me for my interview.
@abellujan668 жыл бұрын
"Don't turn it on, take it apaaart!" ... immediately turns it on.
@christophschmeler27447 жыл бұрын
He even wore the proper shirt...
@bt4103828 жыл бұрын
i translated a lot of photocopier manuals in the past and i worked with technicians. so i should say that you missed some good stuff. those solenoid driven clutches control the shaft they are connected to. when you fire the solenoid, the free running gear engages. the point is, you don't have to put several motors and synchro them electronically. One big motor turns the entire gizmo. most modern laser scanner head (that six sided mirror thing) has a ceramic bearing which has a real tight tolerance. you can lift it and replace quite easily, however. fuser unit has a VERY powerful halogen bulb and ptc's and thermistors inside. toner dispensing unit has a very complex measurement algorithm which regulates the toner/developer (ferrite material) ratio electronically. one last word: maybe you noticed, you can not connect a wire to a wrong socket, they're all different in the entire machine. i especially noticed this with Japanese copiers.
@smokeajayson2 ай бұрын
The six sided mirror thing is a polygon mirror motor.
@Clell656199 жыл бұрын
Late to the party, but as an old copier tech, just a few notes. There is no 'secret harddrive' for capturing every copy the machines scan. If there was, it would fill up somewhere around the 1000th copy. There are digital copiers with integrated HDDs but you have to specifically tell the machines to archive the images There is a security feature on digital copier, that integrates machine identifying serial numbers into each image. The LED array you pulled off the Drum assembly frame is not for cleaning the drum, at least not really. The drum assembly has a cleaning blade to remove remaining toner from the drum prior to it rotating in front of the LED array, known as the Quenching array. The purpose of the LED is to neutralized the charge on the drum surface prior to it turning to the corona wire (which reapplys the charge). Basically the digital image is formed on the drum in the following sequence: 1. cleaning blade removes remaining toner 2. Quenching LED neutralize drum surface charge 3. Corona wires apply negative charge to the drum 4. The Rotating Mirror array throws the image on the drum, w/ light portions of the image imparting a negative charge to the drum 5. the drum rotates past a 'magnetic brush' which allows positively charged toner to come into proximity with the drum, with the positive toner coating the negatively charged portions of the drum. 6. drum rotates to fact paper, the paper is more positive than the drum, pulling the toner off the drum onto the paper 7. paper runs through fuser, and the toner is fused into the paper via heat and pressure 8 customer doesn't like the image (usually because they never clean the copier glass) and place a service call, where they spend most of the tech's time listening to them complain about the copier.
@chrizizdaman9 жыл бұрын
Clell Harmon Thanks for information! I have been trying to learn the parts and how they work. I deliver copiers and anytime we pick one up from a doctors office or government facility the hard drives have to wiped. I have been told that machines today can keep millions of past print jobs on the drives?
@Clell656199 жыл бұрын
***** Like I said, there are digital copiers with integrated HDDs, but you have to tell the machines specifically to store a copy A quick check of the current corporate industry standards have the higher end units with three terabyte drives (some of the more absurd ones are actually installed with RAID arrays to ensure the images are safe) Millions of past copies? No. Not on any one machine 10s of thousands would be pushing it.
@EwanMarshall9 жыл бұрын
Clell Harmon I know from the security side that the buffers often keep the last x number of pages in network printers, I'm sure it's the same with digital copiers that work in a similar way. It eventually cycles over the buffers but some of them are rather large. So you may be able to get the last week's worth of data or so out depending on usage. But it's not infinite of course.
@Clell656199 жыл бұрын
Ewan Marshall Not on a copier of this vintage. The image isn't really 'digitized' in any meaningful way. It's a straight through path from the optics to the organic drum, with only a minimal delay through the logic array. This model of copier does have memory, but only few pages worth (up to 20 if I recall correctly), and its plain old fashioned dynamic ram. Which means the ram reinitializes each time it's powered up... or the next duty cycle. Modern stuff, sure, you need to be careful. These >15 year old machines, not so much.
@EwanMarshall9 жыл бұрын
Yeah, I know, but you'll be surprised, that said, solid state buffers can be a problem to. And we have ways to maintain data through a power cycle of DRAM which takes hours for the data to naturally degrade fully and longer with tricks like the use of liquid nitrogen to cool it. Most computers do not actually wipe the memory on initialization just when they want to start using that page. Yes, it depends on the model as to how much of an issue it is. Finally, often a business the machine is never fully shut down so over the weekend a network attacker can often get to those buffers. Ideally one wants to be able to store the whole document in the buffer these days (scan once then correctly collate copies of multi-page documents, so those buffers have gotten bigger (to hundreds of pages these days) but even 20 pages can be a problem if that is medical records, bank records or financial statements.
@hadireg5 жыл бұрын
I went late to work because of this teardown :) I had to finish watching all the amazing smartness and beauty inside this copier! Thanks Dave! cheers
@malanvogt9 жыл бұрын
I repaired copiers for quite some time. Your quite off on how the entire thing works. Fun to see someone discover the difficulty of repairing these.
@Indigo808610 жыл бұрын
Protip: don't use even remotely lukewarm water when cleaning toner off of your/your things. Use ice cold water and it should come right off
@Teknopottu Жыл бұрын
This I got to remember. Going to disassemble two big copiers at some point.
@WooShell9 жыл бұрын
oh man, I wish I could dive through whatever dumpster you throw your teardown output into ;-) there's such a lot of cool stuff in that copier alone that I'd love to reuse for some of my projects..
@SoCalFreelance8 жыл бұрын
Those precision machined metal cylinders are some of my favorite parts. Wipe the toner off them and gawk at their shiny goodness.
@charlesmiller50789 жыл бұрын
Try to get a old Satellite to tear down that would be interesting. I repaired and programmed large business phone systems for 30 years, one day our copier screwed up in the office, we called a repair tech, We were really impressed on his knowledge of copiers, he had the thing torn all apart due to some cog out of alignment. But he got it repaired and it went on working for years after. Electronics repair is one thing having to align and adjust and troubleshoot just where the trouble is coming from is a whole different story. I believe my boss offered him a job before he left. Repair techs truly are talented people and are very hard to find, and must combine many, many skills. At our company new techs had to work with there trainer for 5 years before they were cut loose , some more some less. That laser scanner reminds me of the scanners where you check out in a store, almost the same design. Great hack material for sure. Interesting tear down, tho you did it many years ago, its timeless. Now go sell the scrape metal :)
@MrNadirzenith8 жыл бұрын
You are spot on with a lot of the parts and their functions you were guessing. For future reference, use cold water to remove the toner ;)
@__-mu1xd10 жыл бұрын
I think we have improvements in CAD to thank for ever-more-complicated gadgets. Back in the day designers had to somehow force an extra dimension onto paper to make sure everything fit. Now that third dimension fits so neatly into the two of the computer screen, you can pretty much stick anything in there. And so now my radio makes coffee for no reason.
@SargeZone10 жыл бұрын
back when i worked in electronic scrap, i was the one who always got all these copy machines cause none other wanted to mess with them. we had to completely seperate all bits into various bins, alu, iron, plastics, wires and all that. i had fun ...
@darthrevan20635 жыл бұрын
jens jorgensen I would love to do that
@jaideep13377 жыл бұрын
So hard to imagine the amount of work that goes into building one of these. Even the mechanical systems were very complex. Thanks for the video Dave.
@phillipfeltz77388 жыл бұрын
As a copier tech of almost 20 years. you made me cringe. With every part I was yelling what it is. I hope this video opens some eyes as to what it takes to be a great copier tech. Customers always think copiers are simple. I love your videos, thank you.
@catthecommentbothunter68902 жыл бұрын
Man do you still have those?
@robertbauer67235 жыл бұрын
Wish I could give multiple thumbs up for all the work you put into making this one. Thank you.
@epd80712 жыл бұрын
Great video Dave! Thank you for taking the time to make it! Im lovin Teardown Tuesday!
@youpoofoowoo5 жыл бұрын
I'm a mechanical engineer and lead laser printer development for over 20 years. I began watching EEVBlog recently so allow me for such a super late comment. I enjoyed this video very much. You first thought clutch as motor but later you discovered what it is by yourself. And you did no know this is full digital copier at first but you found the right answer by yourself at the end. You really got great insight of engineering. Now, what I felt interesting was that you were very impressed seeing the main drive unit that comprises of one big DC motor and gears and clutches. Actually drive unit is not very difficult unit to design. Designing itself is rather straight forward and easy. While control panel with LCD and touch screen , that you were not interested in, rather impresses me, a mechanical engineer, more.
@aserta12 жыл бұрын
Gears, motors, parts, plastic bits, boards. Man no one should pass the opportunity to tear one of these down. I've done quite a few, older ones. It's gritty but man the fun is worth it.
@eidorianaladannet9 жыл бұрын
I've done a few teardowns on a few really old photocopiers - 90s vintage - cogs and chains! They weigh a ton, take ages, but lots of great bits :)
@JamiePineappleWyatt4 жыл бұрын
When i was working as a photocopier technician I had to build atleast 10 machines from scraps during training, we had a shed we called the graveyard, filled with 100's of busted machines, managed to build all ten machines from the bottom up and have them calibrated to a T. great experience, never forget the pain and suffering it caused me though :'D in hindsight I wish I raided that shed for so many more parts haha
@MinnoW1212 жыл бұрын
I hope to see a detail tear down of the PCBs. Thanks for the great tear down Dave!
@RalliArt0019 жыл бұрын
Thanks for the bit of Nostalgia. I used to work on this model just over 10 years ago :) The little motors are electro magnetic clutches.I'm happy to answer any questions (might be a bit rusty on specifics for this model)
@user-sf5iq2fl1l7 жыл бұрын
Not even halfway and am already very impressed how complex that machine is.
@metrofan100010 жыл бұрын
"Dave only needs a screwdriver to find out..." Well, no he need's a drill too. Jesus, this monster contains at least a thousand of screws...
@sandy16536 жыл бұрын
And people wonder why the good ones of these can cost as much as $30,000.
@walikai10 жыл бұрын
I fully disassembled one like this in high school electronics, got tons of useful parts!
@brotherlu12 жыл бұрын
Best teardown yet. Thanks Dave, one of the best channels on KZfaq.
@glenthemann9 жыл бұрын
Why? Because we can. - hahaha, the look on his face and the way he said that, I love this dude
@proofesur9 жыл бұрын
WTF you know what we say at the EEV blog; DONT TURN IT ON take it apaaaaahrt. 2 second later. and i powerd it up here. XD WUT
@soundfxasmr9 жыл бұрын
co co combo breaker LMFAO! I was about to comment the same thing! XD
@excite2369 жыл бұрын
co co combo breaker I think everyone who watched the video was ... WTF!!!
@AakeTraak9 жыл бұрын
+co co combo breaker Unacceptable! Unsubscribed!
@kev42418 жыл бұрын
+co co combo breaker that was just a first step in investigation to get started with tear down
@DMack64647 жыл бұрын
Comedy in a nutshell.
@ogvhsarchive8 жыл бұрын
"don't turn it on, take it apart" * turns on photocopier *
@iammeok2 жыл бұрын
"Don't turn it on, take it apart" "... and I powered it up here" XD
@ExtantFrodo210 жыл бұрын
notice the shaft that you pulled the clutch off. The gear spins all the time driven by that first motor. The clutch alternately connects the gear to the shaft to spin the shaft at your discretion.
@00Skyfox9 жыл бұрын
Looks like your photocopier time machine got hit by a train! I had fun years ago scrapping a small desktop copier and got a ton of salvage parts out of it.
@Good0Music0for0you10 жыл бұрын
That was very satisfying lol !! Taking electronic equipment appart mmmm. Hi from London . Love you post Dave .
@6417893265q78425612811 жыл бұрын
Thanks a lot for do such much work and share with us , very cool !!!
@okovermekeamglight45639 жыл бұрын
If i tear that down i am going to need a bigger screw container.
@msk1999112 жыл бұрын
That is one of a kind Tear-down. Absolutely INTERESTING till the last minute. Many thanks for your efforts.
@EEVblog12 жыл бұрын
Always good to find new audience market segments!
@albear9729 жыл бұрын
Now the real fun stuff is to try to put it back together :P The carry handles are standard equipment on all copiers. I worked in that biz 10 + years ago.
@Wolfeman4sure11 жыл бұрын
As someone who fixes this exact model of copier on a close to daily basis, this was fun to watch. Your pretty close for the most part about how everything works. Bravo.
@gastonlutri10 жыл бұрын
Hi Dave.... in minute 11:24, they are not motors, are clutches... normally there is only one motor.
@rbaleksandar9 жыл бұрын
Grab the soldering iron and start tearing down the PCBs. :D Buttons, LEDs, transformers, resistors, capacitors etc. can all be reused. :)
@umeramir12 жыл бұрын
thank you Dave... It would be really nice if your can shed some light on how these electromechanical systems are actually designed and built... maybe a small DIY project from start to end..
@squawkBirdies11 жыл бұрын
I love your voice, Dave. Your enthusiastic "Take it apaarht!" is hilarious!
@mikeselectricstuff12 жыл бұрын
Don't hoover up that toner unless you want to redecorate the place - toner is smaller than the holes in hoover bags!
@erixmix6 жыл бұрын
those hidden handles are for a finisher (the two you show) and the others are for a high capacity external paper tray
@HazeAnderson5 жыл бұрын
#303 ... sure wish this one was a teardown of a Roland TB-303! Never too late ... 😂
@WafflesASAP8 жыл бұрын
You are a brilliant, brilliant guy, Dave!
@8bits598 жыл бұрын
45:41 Need extra screws? Take apart your boss's old decommissioned photocopier!
@8bits598 жыл бұрын
+Noah Keck Or extra motors, sensors, gears, transformers of every shape and size, heck pretty much everything you might need hidden in that darn thing
@aserta12 жыл бұрын
Advice: keep all the screws if you still have them. These are pretty high quality screws.
@electricsnut12 жыл бұрын
The flywheel is there to help stabilise the rotation of the drum and stop image abnormalities due to minute changes. Those smaller units in the paper feed section are drive clutches, quite common to have a single drive motor and clutches to engage drive to seperate sections. The HV unit can are quite high in voltage, our machines run in the order of 6000v for the transfer stages. Need to get you one of our retired colour machines with a transfer belt to tear down!
@billyproctor97147 жыл бұрын
I just came across this older vid. of yours as I was searching for some information on some components that I just recovered from a 7 year old brother machine that took be 7 hours. I had a blast doing it think of all the uses I could come up for all this neat stuff. I thought the same as you, where to start if some came to you with all the parts and said make it work?? Cheers, Billy, Canada
@ondraster12 жыл бұрын
Man, I took apart SO many photocopiers... and they always sport so much different electronics! Some have ARM cores, some have ASICs...
@t0ny7479 жыл бұрын
I wanted to seem him put it back together afterwords!
@davidtaylor50079 жыл бұрын
Unbelievable the amount of Engineering that went into creating that thing! Then think about sub-component contracting, manufacturing, Q/A, and field support!! Amazing they weren't $500K/ea back in the day. And at home I have a ink-jet printer that cost $29US and replacement cartridges (B/W and color) cost ~$60...cheaper to buy the printer than the ink cartridges. Yeah, its not a scanner/FAX/networked but it prints what I need. Great tear-down Dave!
@MatthewSuffidy8 жыл бұрын
Love this tear down Just rip everything out, no turning back!
@mgm54579 күн бұрын
Sometimes I think Dave, I know as much about Laser Printers and Copiers as you do about Electronics ... I've been working on both for over 40 years and not just one brand or model but all of them, and believe when I say they all get it done in similar ways ... The technology improves but the trusty old screwdriver has pretty much stayed the same. I don't get very excited about the technology anymore, but I am always amazed that they get so much done with so little !! I started out working on copiers that only copied and the top scanned back and forth, they used liquid (kerosene & carbon) toner and the first ones could actually catch on fire. Years ago the machines were expensive and the toner was cheap .... this all morphed into give away prices on equipment that had to have the companies toners at exorbitant prices, with a special microchip that locked other companies out with encryption and RFID ... weird business !!! but exciting to the uninitiated as you mentioned !!!
@Chooseyouruniquehandlebyaddin10 жыл бұрын
funny, im rewatching your videos and i just noticed. You turned it on right after you said "Don't turn it on, take it apart" hahaha
@SirDeanosity9 жыл бұрын
***** He pronounced it "apaaat".
@MrDubje12 жыл бұрын
Whatever you use to clean your hands with, do it with COLD water as warm water fuses the toner to your hands.
@technogeekworld10 жыл бұрын
As a veteran it was a little painful to watch the tear down. Wonderfully complex mechanism with many useful part for inventing. I believe that was an organic drum. Selenium ,cadmium. are just too toxic for techs and the environment. Nice to reminisce, thanks for the trip down memory lane. .
@sal412 жыл бұрын
Jeez, such a HUGE machine lol, Thanks Dave, this is awesome!
@mattgring12 жыл бұрын
the little board is your temp/humidity sensor. The machine corrects for that also.
@chancerogers57578 жыл бұрын
I love his voice and hate it as well 😂
@plattcriceta17197 жыл бұрын
Safety shoes comes in mind.;) Nicely done; very educational, but still fun.
@FrontSideBus9 жыл бұрын
You should have a look inside of the Oce Jetstreams that I play with at work! A3 continuous feed in full colour duplex at 150 meters per minute! They cost several million each!
@whiskeyify11 жыл бұрын
That was pretty amazing to see what's inside a copy machine. Growing up I often wondered how things work like for example a telephone. I got hired by AT&T and became a tech and so got to work inside Central offices where all those Switches are...I also installed stuff at customer locations and spent time outside in the field testing cable pairs.
@kenfoland8 жыл бұрын
+EEVblog @ 25:20 The small board with the device looking like a speaker is actually an off-the-shelf ambient humidity/temperature sensor.
@rbaleksandar9 жыл бұрын
The problem I'm having with such machines is that often there is literally no information to be found online about those, which accordingly often renders them useless (especially if you don't have the right testing equipment to get the specs). The mechanics however are spot on an you need no datasheet for looking at a set of cogs and how those rotate. :)
@hypodyne18 жыл бұрын
I got around ten Nema 17 and one Nema 23 motors out of the Konica Minolta photocopier I ripped apart. Glad I did not tear down a Panasonic photocopier.
@gamerpaddy8 жыл бұрын
they get sold really cheap these days... got 2 used ones for 1 buck each, just have to pick them up. i hope to retrieve some useful parts from it.
@ssj3gohan45612 жыл бұрын
In the past I've torn down dozens of scanners/copiers, and prised out those lenses you can see at around 40:30. They're super useful for inspecting PCBs, highly recommended!
@youme2000012 жыл бұрын
I'd enjoy watching the rebuild video as well. Perhaps Dave could post a time-lapse in case I don't have a whole day to watch it.
@stefaneinarsson72237 жыл бұрын
Thank you very much. I am seeing this the second time and still have many questions.
@BonzaiCounterpunch10 жыл бұрын
That thing is huge. Lots of things to go wrong.
@WizzRacing11 жыл бұрын
They are full of usable parts, like servos, motors, optical, relays, wiring, etc. I see these at the trash, its like finding money on the ground.
@olivermatich28188 жыл бұрын
reminds me of work experience, they literally just gave me an old canon to completely teardown
@theantipope43548 жыл бұрын
Those "flat motors" with the 2 blue wires aren't motors, they're electro-magnetic clutches. Machines like this typically have one big motor (the one on the PCB in this case) powering the drive train that does the paper handling, with clutches to enable the various stages in the sequence, eg; paper pickup from the current tray, etc. ETA: Heh. At 17 minutes, he's finally twigged that they're clutches. :)
@edss11 жыл бұрын
I actually recognise that Energy Label at the back, I think this machine was once used in Hong Kong and somehow ended up in Australia!
@sonick80811 жыл бұрын
if eevblog was the only channel on TV, i'd never change the channel again. as an electronics hobbyists, this is just the bee's knees
@WVCapsfan12 жыл бұрын
I tore apart a Mita DC 4090 with the collator last year and it took me almost two weeks - All e-clips and screws - not a single hex bolt. Sold the plastic gears and Tsubaki timing/drive belts on eBay for almost $30. Got almost $20 for the scrap sheet steel minus the steel rods which I am saving. All the motors and clutches test good. There are some really good stepper motors in there!! Stocked up my electronics project parts. A lot of work but worth the effort. Excellent education project.
@patprop746 жыл бұрын
Damm was worth taking a part for the laser galvo alone!
@Tarkusine12 жыл бұрын
There's a printer contractor in the same building where I work and a few times a year they throw out about 30 of these copiers. Before it goes to the dump I go through and strip them of all the motors, clutches and sensors I can find. I've got boxes and boxes stuffed full of different stuff.
@TimberTechWorkshop7 жыл бұрын
I got the exact one for free and took it a part too! lots of great useful parts, took me a while to take it apart ..
@PackratCND9 жыл бұрын
SWEEEEEEEEET ! hardware, hardware, hardware ....Love it. Next is the Space Shuttle !
@hydrolisk17929 жыл бұрын
PackratCND Next week we take apart the NASA control room lol.
@FurkanBahadr7 жыл бұрын
I'm surprised to not seeing much motors in this device. I expected lots of steppers etc.
@Allan-mf1he5 жыл бұрын
hehe as a copier tech your encounter is funny. The HV is from 1K Volt up to 50K Volt on some machines. One of the best machines in its time.
@frac12 жыл бұрын
The scanner does scan "left and right". The sensor is a 1 pixel high x n pixels wide CCD. The mirror set-up handles the "top to bottom" scanning.
@pepe66668 жыл бұрын
holy cow dave that was an effort. man that was fascinating and an adventure. awesome
@msylvain5912 жыл бұрын
This race for the Ultimate Teardown is more and more challenging. This time you won thanks to the item size criteria, but Mike and Tesla500's are still dangerous competitors. Unless a spy satellite or a UFO falls in your backyard, you will need to find some very very serious stuff to win the game. A Magnetic Resonance Imager, an electron microscope or a DNA sequencer should be damn strong inputs in order to winthe Ultimate Extreme Teardown contest.
@TheAnalogyGuy11 жыл бұрын
Yes, Bill - the image is scanned in electronically and then deposited electronically onto the photoreceptor drum via a laser mechanism. I took apart one of the original laser HP laser printers. There is a laser beam focused onto a rotating "hex" mirror. The beam is swept across the photo-receptor drum which removes electrons from the drum (that were deposited on the drum in a previous step) according to the image printed. Toner then attracts to the spots where the electrons were removed.
@zenoist23996 жыл бұрын
If you don't know what it is , call it a mechanism.
@mechlabman9 жыл бұрын
Just a note about the clutches, they are spring wound clutches. Copier manufacturers have been using the since 1969 (I was working on these machines back then). There is a coil spring surrounding the shaft inside these things and the little metal plate floating on the end is pulled in toward the electromagnet to make it clutch. The plate is tied to the end of the coil spring and causes the spring to wrap tight on the shaft causing the gear and shaft to lock up. When the coil is de-energized the spring unwraps and the clutch freewheels. Some guys call these 'Chinese handcuff' clutchs for an obvious reason. Godfrey
@nicholasbodley22386 жыл бұрын
Wrap-spring clutches go back many decades. Perhaps the Model 15 Teletype used them. The Friden Flexowriters definitely did. They often drove the load by one revolution and then disengaged. The ones I knew had springs wound with square or rectangular wire. They were lubricated, (but not likely with extreme-pressure oil!) When disengaged, the spring was held expanded to minimize wear. One end of the spring put some torque on the outer sleeve (spring inside), which was stalled by a pivoted pawl that was pulled out of engagement by an electromagnet. Power to the magnet released the sleeve, the spring contracted, wrapped, and gripped the continuously-rotating inner cylinder. Left by itself, the spring gripped the sleeve inside it. If the e. magnet stayed energized, the sleeve continued to rotate, and the spring didn't slip. If the magnet's power was cut off, its pawl-armature was ready to snag an outward projection on the sleeve. That made the spring expand, and the driven member stopped. However, inertia made the driven member overshoot slightly, and another pawl and "one-tooth ratchet" kept it from going backwards. That kept the spring expanded, minimizing wear. The driven shaft always stopped at exactly the same position. Incoming power rotated the cylinder inside the spring. Cylinder rotated on the output shaft, which extended the full length of the clutch. We called these single-revolution wrap spring clutches. They worked extremely well The Model 28 and later such Teletypes and the IBM Selectric typewriter used a different type of clutch, which had a few pawls inside a shallow cup with a cylindrical inside surface. Those clutches also had a pawl to "stall" the load and disengage the clutch. Cup drove the load. Releasing the first pawl used driving torque to engage another pawl, and as I recall, that second pawl made a third engage. The clutch simply did not slip! Stalling the first pawl made all three(?) disengage. HTH!
@EgoShredder12 жыл бұрын
..."Captain we seem to be moving, infact we seem to be drifting apart in all directions and in thousands of pieces. Please advise on the best course of action.". Captain: "EVERYBODY STAY CALM, WE ARE ABOUT TO DIE!"
@deweys11 жыл бұрын
There's so much cool stuff in this thing I'd love to get my hands on.
@HamishMilne8312 жыл бұрын
My mouth was agape for the whole 48 minutes. Great job :)
@God-CDXX9 жыл бұрын
YOU CAN WASH YOUR PARTS WITH DISH SOAP AND WATER
@k3ith112 жыл бұрын
Oh, the copier I found DID have a hard drive. 20GB Hitachi. They're not used to secrectly store eveything you copy, rather they're used to buffer all the image data that needs to be printed.