No video
IS THIS THE EASIEST LED STRIP LIGHT CONNECTION SYSTEM?
Рет қаралды 66,135
Күн бұрынConnecting to LED strips just got easier with the Robus Easy Clip connector system for Macau IP20 and IP67 LED strips.
This simple to use IDC connector system forms a reliable connection to indoor and outdoor LED strip lights. No need to solder anything!
Check out our full review of the COB LED strip used in this video.
Part 1 - Robus Macau LED strip review
• THE SECRET OF GREAT LE...
* Gary attempts to solder LED strip*
• Gary Hayers (GSH Elect...
== #AD ============================
More information
ROBUS Macau LED strip easy clip connector system
hub.efixx.co.uk...
===================================
🕐 TIME STAMPS 🕕
00:00 Connecting to LED strips is about to get easier
01:20 Easy Clip connector for Macau IP20 LED strip
02:39 Joining IP20 LED strip together
04:00 The alternative solder connection
06:10 Easy Clip connector for Macau IP67 LED strip
06:30 Cut the tape and remove the backing tape
06:53 Small amount of RTV Silicone in the end cap
07:08 Push on to tape open side down
07:20 Warm-up LED strip with hot air gun
07:25 Push IDC connector through the end cap
08:05 end to end Easy Clip connector
09:10 Macau joining cable
09:35 Watch out for the polarity!
10:40 Macau LED strip end cap
======================================
================================
📍SUBSCRIBE TO THE CHANNEL eFIXX helps electricians, electrical contractors, building services engineers, and electrical apprentices. Watching our videos, you'll discover new products, explore new applications and find answers to your technical questions. So if you've been on the tools for years or just starting your electrical journey, we'll help you stay up to date with the latest regulations and developments in the electrical industry. hub.efixx.co.uk... ================================
📺 NEW TO THE EFIXX CHANNEL Watch our essential videos playlist hub.efixx.co.uk...
📺 CATCH UP ON THE LATEST VIDEOS hub.efixx.co.uk...
📺 ELECTRICIANS' TOOL REVIEW hub.efixx.co.uk...
========================================
eFIXX - EDDY CURRENT MERCH
Now available from an online retailer that doesn't do next day delivery. www.eddycurren...
========================================
🔴 eFIXX LIVE Join us for our youtube live stream twice a month - features product sneak peeks, challenges, giveaways and live electrical banter. NEXT STREAM HERE 👉hub.efixx.co.uk... Catch up on previous episodes 👉hub.efixx.co.uk...
================================
🆕 FREE CPD Learn about new applications, regulations and best practice with our FREE CPD modules. - New modules released every month covering everything from surge protection to lighting hub.efixx.co.uk...
================================
📝 APPRENTICE HUB If you're an electrical apprentice, retraining as an electrician or looking to refresh your knowledge, then please check out our apprentice hub. It contains thousands of multiple-choice questions to help prepare for electrical installation exams. hub.efixx.co.uk...
================================
📩 eFIXX NEWSLETTER Sign up to find out about our live events, competitions and product giveaways. www.efixx.co.u...
================================
FOLLOW US on your favourite social networks for behind the scenes action, breaking news and competitions.
🟠 INSTAGRAM hub.efixx.co.uk...
🔵 LINKEDIN hub.efixx.co.uk...
🟣 FACEBOOK hub.efixx.co.uk...
🟡TWITTER hub.efixx.co.uk...
==================================
❌ This content on this channel is for electrical professionals.❌ ==================================
📹 Presented by
Gary Hayers - Editor eFIXX
Gordon Routledge CEng MIET - Technology Editor eFIXX ===================================
#efixx #electricians #ledstrip
@efixx 2 жыл бұрын
Check out our full review of the Macau COB LED strip used in this video. kzfaq.info/get/bejne/i8V2abVn2L3cZH0.html
@daveemsley7141 2 жыл бұрын
Where do you get them? I’ve been using hippo type clips with pins that penetrate the contact pads. I find they quickly arc/become high resistance and fail.
@CoolerQ 2 жыл бұрын
The soldering iron you're using at 4:10 is absolutely massive. You'll probably have a better time if you use a smaller iron.
@mfx1 2 жыл бұрын
And badly oxidised, running it far too hot for too long.
@mfx1 2 жыл бұрын
I think all these solderless LED connection clips are great as when sparks use them and they inevitably fail I get paid to do the job properly. Also that soldering demo was a complete car crash! You should also make sure any silicone you use is non-corrosive.
@chrisd7789 2 жыл бұрын
Agreed. Solder is far better. Its a 'Paid For' promotional video however, so perhaps there's a slight bias.
@efixx 2 жыл бұрын
The silicone is RTV supplied by the manufacturers.
@timearp8185 2 жыл бұрын
That IP67 kit is exactly what I'm looking for to go around my shed.
@pwaelectricalltd29 2 жыл бұрын
This looks so simple to connect and use. Regarding the polarity issue, surely the manufacturer could shape the tape to make one side slightly thicker than the other or something similar. Over 20 years ago I was installing ASi cable (also IDC) that negated the possibility of reverse polarity.
@TheManLab7 2 жыл бұрын
Or. You could just look at the LED/COB tape instead?
@mfx1 2 жыл бұрын
Funnily enough I'm currently putting a load of addressable LED stirip onto a restaurant attached to a five star hotel near At Pancras, one of the maintenance guys saw me soldering and asked if I could do a quick LED repair in the hotel, guess what it was one of these clips that has failed, it didn't take all that much longer to solder the joints and put a bit of clear heatshrink with some hot snot over the joint than the clip would have taken in the first place.
@justme5384 2 жыл бұрын
I use L&S light from Italy. No soldering needed, just plug and play
@Jay-yd5cr 2 жыл бұрын
Wow the growth of this channel to 194k subs, well deserved too always so informative 👏
@efixx 2 жыл бұрын
Thanks a ton!
@kenbrown2808 2 жыл бұрын
the system I've been getting the last few years is a one piece connection clip that pushes onto the end of the tape, and a cover latches over the contacts. less steps, but also less positive.
@MyProjectBoxChannel 2 жыл бұрын
I love soldering I find it very therapeutic. The thing that I find so strange is that a lot of electricians can't even solder properly. If there is no screw terminal to put a wire in, they run a mile.
@efixx 2 жыл бұрын
Most have never been trained to do it properly.
@pikricky 2 жыл бұрын
Really enjoyed that whole series,fantastic tips and accessories,thanks for the knowledge gained
@boblewis5558 2 жыл бұрын
There are a number of issues generally with connection of multiple LED tapes sequentially. Rght at the top of the list is current distribution which is UTTER GARBAGE and basically non existent, causing power loss, localised overheating, and reduced lifespan and potential fire risk, even when backplated with aluminium strip! The CORRECT way to connect LED strips of 3 or 4 Leds per 12v section, is to the CENTRES of multiple short strips and NOT to the end of one LONG strip! This is definitely a case of keeping Sparkies with minimal to ZERO electronics knowledge well away from electronics (LEDs)! Current should be split, ideally, such that the MAXIMUM current being shared per "short" strip is
@mfx1 2 жыл бұрын
These are not "Insulation displacement" connectors, IDC's are very reliable, widely used in the telecoms/data industry but these DO NOT work in the same way, not even remotely. This is closer to pushing a wire through some tinfoil and hoping it makes a good long term connection.
@MatSmithLondon 2 жыл бұрын
Spot on. I couldn’t have put it better myself. I have seen various clip-on / solderless LED tape connections before (bought various different types for testing) and this looks similar. Absolute waste of space. No WAY would you install this up a ladder in 40 different places around a house, behind coving etc… not a chance
@djkyleb 2 жыл бұрын
@@MatSmithLondon couldn’t have said it better myself these so called easy connectors do nothing but damage the tape and cause an arc connection and very unreliable. There’s nothing better than a soldering iron and a steady hand for a perfect connection on any tape from 2 - 5 tabs or more. My advice is stay away from these and do it correctly the first time!
@rachaelb9164 6 ай бұрын
Where did you get that heat gun with the metal shield around it? That’s pretty smart.
@SpyrhoTheOneManArmy Жыл бұрын
do you also have 4 pin connectors? for Govee M1 light strip? they have a thick silicon layer
@glen4cindy 10 ай бұрын
I guess I've found this video too late to find these connectors. I'd need the 3 line or 4 line ones but I still don't see them anywhere on the site linked here. They look awesome for a newbie solderer like myself.
@TheManLab7 2 жыл бұрын
I see straight end to end connector's but why don't they just do the same as with plastic trunking?
@ShaneSiKBoYBrown 2 жыл бұрын
Single insulation is outside of an enclosure where it enters the driver. What is the solution for this? Ie. If it was on top of a kitchen unit?
@efixx 2 жыл бұрын
It’s SELV so single insulation is fine.
@ShaneSiKBoYBrown 2 жыл бұрын
@@efixx Thanks!
@ColinRichardson 2 жыл бұрын
Now I just need a U shaped Dado (or similar) that I can put these lights in and so I can get some mood lighting near the ceiling of my front room.. the "big light" is too harsh, and there are dark spots with lamps.. so something that could go around the whole thing without dots would be nice.. Wonder if they would do a 90° angle quick connect thing rather than having to have such a large amount of slack just to do a right angle
@martinnixon2079 2 жыл бұрын
This could be a game changer. RGB is the one that most people struggle with.
@bryancarruthers1121 2 жыл бұрын
Brilliant
@TrueSuspekt 2 жыл бұрын
I guess if the strip was only white (no WRGB or 6 pin contacts) this would be great
@tammmacdonald7723 2 жыл бұрын
A smart electrician would test before shrinking.
@mfx1 2 жыл бұрын
That's an oxymoron.
@mfx1 2 жыл бұрын
A smart electrician wouldn't touch these or any other type of piercing connectors with a bargepole.
@TradieTrev 2 жыл бұрын
That system reminds me of the gel scotch locks.
@mfx1 2 жыл бұрын
gel scotch locks are long term proven proper IDC connectors, these LED connectors are neither long term proven or IDC.
@TradieTrev 2 жыл бұрын
@@mfx1 Absolutely true! I trust my workmanship over these marketers efforts. They didn't even use resin filled heat shrink on the soldered model.
@Dog-whisperer7494 2 жыл бұрын
Nice 👍 even I can do it Great video guy’s as always 👍👍❤️
@VintageVaughnVehiclces Жыл бұрын
I now see why the are made the way they are
@robswingler 2 жыл бұрын
Could you do a video on the max distance drivers can be away from the led tape . I’ve heard if it’s a constant current driver it’s not really a problem with volt drop but a constant voltage drive it is .
@mfx1 2 жыл бұрын
Constant current driver will automatically compensate for wire resistance, otherwise distance is a variable dependant on type/length of LED strip, number of injection points, gauge of cable feeding them. Just like many sparks maybe shouldn't get involved with Cat5/IT installations maybe they shouldn't get involved in this either (I say this after having had to fix a load of badly crimped Cat5 and bodged LED strip done by an electrician who I would say was otherwise totally competent as long as he sticks to fuse boards and sockets etc.)
@efixx 2 жыл бұрын
See this video as a starter on CC drivers - kzfaq.info/get/bejne/lb-ejdCCsbXKcWg.html We will look at the issues around Volt drop for fixed voltage drivers.
@ianstanley5157 2 жыл бұрын
Can you use any type of silicon at the connector ... are they all suitable for electrical connections ? 12/24 VDC shouldnt be a problem ... but when you using 230 DC strip lights ... does silicon have the correct properties to make the insulation resistant properties suitable?
@efixx 2 жыл бұрын
This connector is for the low voltage system only. We’ll be looking at mains voltage strips soon.
@davidjulian8643 2 жыл бұрын
Do they make these in 3, 4, or 5 pin for addressable / rgb LEDS?
@mfx1 2 жыл бұрын
You can get them but DO NOT use them unless you want complaints/callbacks down the line.
@dugi674 2 жыл бұрын
Great content as always lads, thanks
@rob19632 2 жыл бұрын
Is the corner connector available with a shorter wire or in the ip20 version just a right angled connector both flat angle and inside/outside would be great ,like you get for trunking.
@efixx 2 жыл бұрын
Can see one in the catalogue- they would be a good addition.
@milesdudleydiyanimatronics6467 7 ай бұрын
You guys really dont show how to connect bare wires using the clips. Your wires are already soldered to a "pcb" board. so there is soldering required. DO you sell these pcb boards? Or is there another method?
@am10231 Жыл бұрын
3:00 tried to do that didn't work 😒
@Cablesmith 2 жыл бұрын
Nice 😍
@theetheeyog9878 2 жыл бұрын
Would they fit in a led cealing plastering profile
@efixx 2 жыл бұрын
Yes
@mindseyewatering6635 6 ай бұрын
Does Robus have a distributor for the United States?
@Z-add 2 жыл бұрын
How do you hide those monster power supplies for the cob led strip.
@danielwitheridge4295 2 жыл бұрын
What are the part codes for these products
@efixx 2 жыл бұрын
Link in description
@stevenlucas4421 2 жыл бұрын
What water proof enclosure did you use to extend the cables to the strip.
@RWi1983 Жыл бұрын
Need it for RGBIC
@matthewlugo2417 2 жыл бұрын
Are the rgb cobs bright enough to light up a room
@monkeyrun 2 жыл бұрын
seems you need to be a wholesaler to buy from the site. and I can't find it for sale anywhere.
@nickwraith312 2 жыл бұрын
What strip width do the connectors work with? Or are they specific to the Macau strip?
@efixx 2 жыл бұрын
These are specific for this strip but may work with others depending upon the solder pad / track location.
@jec_ecart 2 жыл бұрын
I would prefer soldering.
@londontrada 2 жыл бұрын
2:20 that's what she said
@johnflower8648 2 жыл бұрын
Was it silicon grease or silicon sealer.
@efixx 2 жыл бұрын
RTV sealer not grease
@mattbandura9015 2 жыл бұрын
Every time I watch something on this chanel i ask myself this questions 'how much money they get for creating this advert'. You could be more transparent if video is a paid advert, sponsored, or completely not paid or sponsored product. #ad is not enough
@efixx 2 жыл бұрын
Says paid promotion at the start of the video in the in screen annotation.
@AverageatMostThings 2 жыл бұрын
Is there a 90 degree solder-less connector for going around corners?
@lanzauno 10 ай бұрын
yes
@oscarbarradas7201 4 ай бұрын
TOP
@odinnln5694 2 жыл бұрын
I told you so.
@kubaxd25 2 жыл бұрын
Your soldering techniqe is wrong. The joint on the led strip didn't got any flux. There are 2 proper ways - you heat up the wire and the pad, then add solder, or tin the pads, tin the wire, add liquid/paste/gel flux to the pad or wire, then heat up the wire and pad.
@mfx1 2 жыл бұрын
You do not need to add extra flux for normal soldering of clean wires to pads with flux cored solder. The only time I ever use flux is for repair/re-work and some surface mount stuff.
@kubaxd25 2 жыл бұрын
@@mfx1 You don't need flux, when you are adding solder to the joint, but here, when soldering tinned pad to tinned wire, there is no flux in the solder core. The joint shouldn't look like a ball, the solder can't flow well without flux (in the solder core or added externaly). You can do it the way they did without flux, but you need to be really quick, so the flux won't evaporate.
@mfx1 2 жыл бұрын
@@kubaxd25 That's most likely due to the iron being way too hot (evidenced by it being badly oxidised in the video) or used for too long, do it right and there will still be enough flux left for a good joint. I've done thousands of joints on LED tape for TV, retail and night club installations with no additional flux and no issues.
@garytango 2 жыл бұрын
👍👍
@acelectricalsecurity 2 жыл бұрын
Don't think it gets much easier than that
@tombruton 2 жыл бұрын
what about if you want a decent LED strip
@liamjordan5935 2 жыл бұрын
Be careful with that colestreal gray ,Christmas is coming??
@portsmouthize 2 жыл бұрын
You can have any colour you like so long has its white.????!!!!!!!!!
@efixx 2 жыл бұрын
Warm or cool 😎
@Naughty_Squad 2 жыл бұрын
The dude on the left reminds me about a manager that was a prick all the time mister wise guy nobody liked his duty smile.
@bernardgarrett3897 2 жыл бұрын
However Gary is a greater instructor and has the quality and confidence to be self effacing. To me that confidence is in someone who has nothing to prove.
@helmanfrow 2 жыл бұрын
Not really IDC, tho, innit.
Дима Масленников
Рет қаралды 6 МЛН
Harley Quinn with the Joker
Рет қаралды 25 МЛН
The Hook Up
Рет қаралды 50 М.
eFIXX
Рет қаралды 20 М.