EK Civic 5 LUG Big Brake Conversion NEW Enkei Wheels
Рет қаралды 3,645
Жыл бұрынHONED DEVELOPMENTS NUT AND WASKER KIT LINK
honeddevelopments.com/product...
Items Used IN the Builds You see On This Channel Can Be Purchased from
spoolup.com.au/product-catego...
BIG THANK YOU To The Channel Supporters
RACEWORKS
PROTEX
T7 DESIGNS
COMPLETE AUTOPAINT SPRINGVALE
BURSON AUTO PARTS SPRINGVALE
I Couldn't Do What I Do Without Their Help.
Below are my past & present builds
*1991 Nissan Pulsar N14 SSS- 118kW not raced
*1996 Nissan Silvia S14 200sx -220kW 13.0@109mph
*1990 Nissan Skyline R32 GTR- 350kW 12.0@118mph
*1996 Nissan Skyline R33 GTR- 520kW 11.0@127mph
*2015 Nissan Pulsar C12 SSS- 200kW 14.0@104mph
*1998 Honda Civic EK sedan K24 TURBO SWAPPED 275kW
*2012 Honda Accord Euro K24 CU2 120kW
*2003 Honda Accord Euro CL9 Racecar 140kW
*1987 Holden VL Commodore Turbo Restoration
*2000 Honda Civic EK D16 N/A SOLD
*1995 Honda Civic EK4 B16A VTEC SOLD
*Toyota SW20 MR2 SOLD
*1990 BMW E30 318 M54B30 SWAP
@TURBOTRISTO Жыл бұрын
Cop Some Merch here and support the channel ---->>> spoolup.com.au/product-category/clothing-merchandise/
@ClayWong Жыл бұрын
Loving the new look of the EK. SUPER KEEN to see it rip brother!!🔥 Appreciate you looking out for me and for the entire car community too man, you're doing God's work.❤
@TURBOTRISTO Жыл бұрын
I try
@danielarnold7466 Жыл бұрын
Dude that looks sick, especially in the colour match carpark
@TURBOTRISTO Жыл бұрын
You noticed that huh hahah good stuff I’m glad someone did
@diddeekong4687 Жыл бұрын
Looks so good mate! I would love to hear it every video please 😂
@TURBOTRISTO Жыл бұрын
Let me just say the car hooks now on these tyres the alignment is sorted and the hub rings are on it’s a beast I have grip in 2nd gear on now, before it was only 4/5/6
@diddeekong4687 Жыл бұрын
@TURBOTRISTAN broooo!!!! I think I'd just like videos of just hearing it drive. Nothing fancy, no content, just cruising. 😊
@jackhudson55 Жыл бұрын
love the look of the ek sedan, you have made this car look so good and sounds amazing.
@TURBOTRISTO Жыл бұрын
Thanks Jack
@jackhudson55 Жыл бұрын
@@TURBOTRISTO anytime dude, keep up the amazing work 😁
@OfficialMenOfCulture Жыл бұрын
Looks so sick bro. Love the wheels!
@TURBOTRISTO Жыл бұрын
Cheers man
@rhysrhysrhys Жыл бұрын
TT, you don't need hub rings if you torque the wheel nuts up correctly. Car looks great.
@TURBOTRISTO Жыл бұрын
You do if you want to track the car maximum gs haha
@rhysrhysrhys Жыл бұрын
@@TURBOTRISTO Incorrect, but you do you!
@VishesAndCo Жыл бұрын
Love the content - been following your build and gives me inspiration to do a kswap one day !
@TURBOTRISTO Жыл бұрын
I really hope you can do it soon too it’s the best thing you can do to you honda
@VishesAndCo Жыл бұрын
Lots of saving to do - after being in my friends k24 mr2 I was blown away
@liambenno Жыл бұрын
Should get a tall tripod for the technical bits so you can talk and do! Videos are great man
@TURBOTRISTO Жыл бұрын
I do have just forgot to set it up hahha sorry
@anthonytran1260 Жыл бұрын
Awesome video, you explain the 5 stud conversion so simple compared to other tutorials I've seen on KZfaq.
@TURBOTRISTO Жыл бұрын
thank you mate I did try to make it simple and not too painful to watch haha
@gilluh Жыл бұрын
Man this thing is gnarly lookin
@TURBOTRISTO Жыл бұрын
Thank you brother
@gemini3558 Жыл бұрын
Tristan the new wheels look sweet mate beautiful !!! 😜👍🇦🇺
@TURBOTRISTO Жыл бұрын
Thank you brother
@nhialor84 Жыл бұрын
Looks awesome; great choice in wheels!!! What suspension settings do you plan to run for track (ie: camber, toe etc)?
@TURBOTRISTO Жыл бұрын
I will look up the oem settings and add a little bit of a tweak I think with a little extra front toe out
@Max-hl3wp Жыл бұрын
looks mad surely it gets an em1 wing
@TURBOTRISTO Жыл бұрын
Like the small hoop one? If any thing it would get a r32 Gtr wing or a second boot with a monster by wing
@jarrad5723 Жыл бұрын
@@TURBOTRISTO dude that's hilarious, I was just looking at getting an r32 gtr wing for my sedan and the guy ghosted me. Either that or a 180sx Type X wing look awesome.
@TURBOTRISTO Жыл бұрын
i see we both have great taste haha
@mickosjzx Жыл бұрын
Sleeper car ftw!
@TURBOTRISTO Жыл бұрын
Until the gate opens
@vongdong10 Жыл бұрын
What? So you had 16s, had to change to 17s because of apparently you couldn't get good semi slicks but then went back to 16s? The A050s come in 4 sizes for 16s. Anyway, a lot of good info regarding the 5 stud conversion.
@TURBOTRISTO Жыл бұрын
Yep I know I called tyre shops in australia and got rubbish info, every size was unavailable or $900 a tyre, until I came across Zestino and I got great info and now I have cool new wheels 5 stud and big brakes and heaps of grip and a new master cylinder so it worked out in the end
@Oplese Жыл бұрын
Little sleeper
@TURBOTRISTO Жыл бұрын
For a second until you hear it
@miguelunknwn 5 ай бұрын
excellent video where can I get the rear bolt and rear disc washer
@TURBOTRISTO 5 ай бұрын
FROM HONED DEVELOPMENTS honeddevelopments.com/product/5-stud-rear-hub-nut-kit/
@jayek9 7 ай бұрын
Sick build im doing the same 5lug conversion. But I have the Mazda 626 rear nut 32mm. Do you have the part number for that slim nut?
@TURBOTRISTO 7 ай бұрын
Check the honeddevelopments website
@jayek9 7 ай бұрын
@@TURBOTRISTOthanks
@KyleW-nw5lt 3 ай бұрын
Anyone know where I can purchase 4 to 5 lug conversion kit in the UK?
@jdm_motive1 7 ай бұрын
What front hubs and calipers did you use?
@TURBOTRISTO 7 ай бұрын
they are crv/dc5 hubs & dc2 calipers on crv knuckles
@jdm_motive1 7 ай бұрын
@TURBOTRISTO i have a ek4 so i dont have to change the knuckle correct? And i have the crv caliper with mini rotors already on
@Antflizzle 11 ай бұрын
Did you have spongy brake pedal after bleeding your brakes?
@TURBOTRISTO 11 ай бұрын
Yeah but I fixed it my master was leaking
@Antflizzle 11 ай бұрын
Damn, I have no leaks and bled the brakes multiple times. Replaces the booster and MC to GSR and can't figure out what's going on 😥
@TURBOTRISTO 11 ай бұрын
@@Antflizzle did you bleed tha calipers upside down? the master wont be leaking as such but the seals will be gone, replace the master cyl abd try again, try to use the 7/8 master cyl for the best pedal feel
@TheSicWolfGaming Ай бұрын
Ive got a 1998 Civic LX with 36k miles. I had bought every part to convert it to manual and from the D16y7 to D16y8 but I'm selling those and focusing on a K swap. Will a 4 lug Enkei RPF1 15x8 fit good with lets say the Integra and or Si front and rear rotors and calipers or would you recommend going bigger and doing the 5 lug. Im not doing this for a track car and would go as big as the 16x8 RPF1 with the Nitto Neo Gen on either one. Totally new to the conversion and dont know much about them.
@TURBOTRISTO Ай бұрын
Both options will work for sure, you can go with either choice man
@TheSicWolfGaming Ай бұрын
@TURBOTRISTO Im planning on getting a bend pak GP-7LCS 7k lb lift. Will have cut, reinforced, and dig a deeper section for the floor posts
@TheSicWolfGaming Ай бұрын
@TURBOTRISTO All the steel and cast iron suspension is rusted and the calipers being the worst. Low mile car but came from a state where they salted the roads. Frame and body had a factory under coat. Only the suspension parts near the wheels are rusted. I did buy every suspension part down to the nuts and bolts. Kyb shocks. Whatever parts I dont use can go on the wifeys when she needs them. Same style civic, got alot more planing to do for this cars build
@TURBOTRISTO Ай бұрын
winning at life man thats great
@TURBOTRISTO Ай бұрын
get some lkbs check out the restoration i did on my evo that thing was rusted to the max but now its mint
@SIRICKO Жыл бұрын
No do not cut the bonnet please.
@TURBOTRISTO Жыл бұрын
im open to any sugestions :)
@diddeekong4687 Жыл бұрын
Noob Q: Does a k swap not sit under a fully closed bonnet?
driving 4 answers
Рет қаралды 1 МЛН
Engineering Explained
Рет қаралды 16 МЛН
NorthWay ATV club
Рет қаралды 735 М.