"Bagged" RC Blazer Rear End Mock Up!!!
Рет қаралды 2,466
Жыл бұрынAfter getting the front end mocked up and the suspension working in the last video, it's time to move onto the rear. The rear end of my "bagged" rc build is a little more involved, meaning there's more cutting and more modification needed.
I'll be using the original chassis again but cutting it up a bit, and I'll use the normal AR44 axle from Axial but I cut that up too!! After all the cutting and welding and gluing, it's a lot of 3D printed parts again to get the rear suspension to work and travel up and down like I want.
We're getting close to having a rolling chassis. Pretty soon we'll be figuring out body mounts!!
Hope you enjoy the Video!
Hit that Like button if you enjoyed this video!
Subscribe to FullThrottleRC to see more RC videos including running videos, build videos, and RC product reviews.
Follow me on Instagram : / f_t_r_c
If you like what I do and want to support the channel, consider becoming a member of the FullThrottleFamily: / fullthrottlerc
@jhawk1985 Жыл бұрын
Very cool setup. Excited to see what the end result is. Always loved mini truckin and lowered trucks in general. I own a 2001 Ext Cab Silverado on 20s lowered a little bit. Got me thinkn about what i could build now
@FullThrottleRC Жыл бұрын
Thank you! I've always been sort of into the mini truck scene as well. On my second S10 now and looking for a square body hahaha. This is a nice little outlet and a lot cheaper as well!
@mikeupton5406 Жыл бұрын
That narrow rear end is BRILLIANT!! I hope Josh over at R/C Everyday sees that. Some of his Rat Rod builds would be a match made in R/C heaven for a narrowed rear end
@FullThrottleRC Жыл бұрын
Thank you so much. I actually messaged him yesterday about what wheels and tires he uses on some of his builds. His videos are what gave me the confidence that I could tackle something like this!
@NBC_NCO Жыл бұрын
Excellent.
@FullThrottleRC Жыл бұрын
Thank you!
@derrillhymel6476 Жыл бұрын
Nice, can’t wait for the final product. I’m sure it’ll be sweet.
@FullThrottleRC Жыл бұрын
Thank you! Fingers crossed it all works out hahaha
@thingsofdoing4507 Жыл бұрын
Wish I was your neighbor, great build !!! They make control that your servo's receive gyro input you could also have it tilt an rock with that slam shadey
@FullThrottleRC Жыл бұрын
That could be pretty cool! I'll probably end up just having two switches, one for the front servos and one for the rear.
@joshschonfeld3675 Жыл бұрын
This is soooo dang cool! I've been thinking about building something like this lately then this video pops up so that must be a sign lol I can't wait to see more content like this!!!
@FullThrottleRC Жыл бұрын
Thanks! It's been a project in the back of my mind for a long time as well and its finally coming together. I think the most exciting part will be when the body is on and moving up and down!
@joshschonfeld3675 Жыл бұрын
@@FullThrottleRC well you're on a roll brother 💪🏼
@ryurc3033 Жыл бұрын
Really into this project. I'm always building out of what I have, happens to be steel and a welder. I have a tig setup that is so close to operating ( just need regulator and clean gas). But I'm a mechanic by trade so there are alternative uses, but building tiny trucks has consumed most of my spare time in the last 5 years.
@FullThrottleRC Жыл бұрын
Thank you for the support! I'm not an expert at welding by any means. Would've loved to use tig for this chassis but I'm admittedly not comfortable enough with it yet.
@LittleGrey Жыл бұрын
I’m really excited to see how this goes! How do you like the abs-like resin? Do you think it will hold up well?
@FullThrottleRC Жыл бұрын
I'm extremely pleased with the ABS like resin! A lot more durable than I thought, I was really worried after the first few prints with standard resin. It prints well, easy to thread screws into, and has enough flex in it that I don't think the parts will be brittle or break easily.
@endosrc Жыл бұрын
have you been looking at the ssd lightweight aluminum wheels for the no prep car?
@FullThrottleRC Жыл бұрын
No I haven't. I went back to the plastic bead locks. If I remember right when I first looked at them, the lightweight aluminum wheels are still heavier than the split six with my bead lock rings
@endosrc Жыл бұрын
@@FullThrottleRC if this is right, SSD00551 is 48 grams, and if google is right, the split six's are 63 grams
@FullThrottleRC Жыл бұрын
@@endosrc I hadn't realized they offer them with the rings and hardware now. When I first saw them it wasn't with hardware and that's where I got them heavier at
@castekracing 9 ай бұрын
How did you cut down the axle themselves?
@FullThrottleRC 9 ай бұрын
I cut the axle with just a thin hack saw blade and then turned the ends down in the lathe to make sure they were straight and true
@castekracing 9 ай бұрын
@@FullThrottleRC nice. And how did you manage to get the flat spot for them to engage in the diff?
@FullThrottleRC 9 ай бұрын
@@castekracing just a file. Thankfully the AR44 axles are just driven with the two flat spots on either side of the shaft so it wasn't any intricate shapes I had to replicate
@castekracing 9 ай бұрын
@@FullThrottleRC ah so patience is key here... I'm out then 🤣 thanks for the tips! Killer build
@tanklesspolarstar Жыл бұрын
I have to stop watching you because you always make want to start a new build
@a_s10_blazer Жыл бұрын
Same lol. I'm wanting to build a front engine solid axle drag car with a c10 body I have for a losi. If I build a custom chassis like he his and try and keep it narrow it would definitely work
@FullThrottleRC Жыл бұрын
Hahaha what's the fun of it if you don't have three projects going on at once!
@tanklesspolarstar Жыл бұрын
@@FullThrottleRC i wish i could afford it. But keep up the awesome builds love the creativity
@NorcalChef209 Жыл бұрын
Why not use hydros instead of all the stuff that's gonna snap after driving around and or in motions??
@FullThrottleRC Жыл бұрын
It seemed a lot more complicated for something that won't take a lot of abuse. I've tested everything and so far haven't seen anything break, but we'll see!
@ryurc3033 Жыл бұрын
@@FullThrottleRC I have alot of confidence in 3d printed parts anymore. Not like your racing in u4, or e-buggy. I'm sure it will work
Dharni
Рет қаралды 149 МЛН
Scale Addiction
Рет қаралды 12 М.
RC Everyday
Рет қаралды 16 М.
Quantum Tech HD
Рет қаралды 2,5 МЛН