I really like you fast forward style of instructions. The viewers get to learn without sitting through dumbed down slow mo instructions or by playing at 2x speed.

Super helpful and concise, thanks for putting this together!

You covered a lot of bases. Answered a bunch of questions I had about the names of things needed and you got right to the point. Thanks! A+

Thank you for this cool introductory lesson sir! That was very helpful!👍

Great delivery & to the point. 👍🏻👍🏻👍🏻

Great video!

Great video. Just the facts. Thanks

Cool video, good intro to PVC conduit.

Great synopsis.

Thank Brother, greatly appreciated!

GREAT introductory video! Very educational & entertaining...PLEASE KEEP 'EM COMING!!!

Thanks very helpful

Very well explained... much appreciated!

loving the efficiency in which you speak. thank you... subscribed and liked...

Great video

Thanks man, your awesome.

great video

By far the best electrical tutor on the net! He helped me pass my journeyman test a couple weeks ago!

Exactly what I needed to hear thanks man!

Great info! And explained promptly. Appreciate it.

Outstanding video, great presentation.

I'm getting ready to run a sub panel to my carport. I was not aware of the 360 rule but it makes a lot of sense. Very useful information. Maybe next lesson teach about conduit fill. I was watching a guy in Lowe's today buying about a hundred feet of #2 with 3 conductors and a ground. He picked up a piece of 3/4 PVC to see if it would fit. I think he finally ended up with 1 1/4. Better to use a fill calculator and make sure. Thanks for the info!

Thanks it was helpful.

Great video, Thanks for sharing. New subscriber here from Philadelphia PA

I remember doing a loft building in down town Dallas Tx all services in PVC .

Thank you! This was super helpful, if you're able to, could you please do a video on how to install it properly? I'm redoing my kitchen and adding an island. I dug up the trench and I'm ready to run electrical. I just want to make sure I do it the right way

Thanks. About to attempt inground conduit for my pool. Wish me luck

Cool, thanks, but you didn't tell us how to join the conduit to the couplings. Glue?

good video thanks. i am basically a master electrician now that i watched this video 👍⚡😲

I appreciate you sharing the basics in this video. I like your concise descriptions of each part. You seem to hit every point and waste no time. Question : I live in the country ( very rural) and want to wire my new metal 3 sided , wood paneled car port. I bought a large roll of 2/12 romex and screw in rings to tighten the wire circuits to the walls. I guess I thought I'd try to run the wire like it is instead of through conduit. But I'm not familiar w/ all the issues I might have down the road. Would you help me w/some of the pros and cons of not using or using conduit ?? Maybe what you would recommend ?? Thank you for your generous consideration, Sincerely ...................

You sound like you’d be fun to drink with! You should chuck stuff into camera view when you are out of camera view digging for your next props….like the Swedish Chef. Good video!

In all my 50 years as a sparky never once installed PVC inside of a house. Would go with EMT. In my area in commercial locations you are not allowed to run any PVC ( power & Plumbing ) due to poisonous funes it gives off in a fire. I wired up a 3/4 millon dollar house in a rich area where they made the plumber install 4" expensive copper drain lines rather then PVC or safer cast iron pipe. Should use expansion joints on all outdoor PVC runs especially in colder climates. 100' of flimsy schedule 40 PVC with a 100 degree temperature spread from hot summers to cold winters will create 4" of expansion / contraction.

Great video. Do you have a recommendation on running wire through drywall to pvc conduit?

Great channel I was just introduced to it….quick question can I glue flexible non-metallic (wire whip) conduit into a LB fitting?

Here in Florida when they do wells, they splice in the LB. I know it says it’s ok but how do you determine your max fill in it? Example a 3/4 LB has a 6.5 CU IN marking in the LB and usually there are 3 #12’s spliced in it. How do I find if the LB is adequately sized for those #12’s? Do you have a video for that?

2:00 the LB gets you into and out of buildings or walls, correct?

In My company we run only 3 90

Thank you so much. I have done a fair bit of wiring, but never had to use conduit. I now have to make a short run, in a garage, under 20 feet, but I am going to have to use conduit. Question: Is it legal to use PVC in a a garage, or do I have to use EMT or something else? The garage has finished walls, and the outlet and all conduit will be installed above the height that a car cold hit the tubing Thanks.

When Transitioning from outside (stucco/sidding) to inside garage. Does the PVC conduit need to be present in that 4 to 6 inch wall cavity? when running THHN wire?

How Do you transition from a 2 inch conduit coming out of the ground into an outlet outdoors

The conduit body: is that what you'd use to run surface-mounted pvc conduit through a wall, from one room to another?

Thanks for this video. We have an outdoor electrical socket that is free-standing in our backyard, but the PVC conduit (that props it up) had been snapped and so the entire assembly is knocked down right now. How can we repair this? Can we buy a split coupling merge the separated conduit pieces back together?

Thank you 🙏

Hello Electrical DIY Coach, I want to transition from PVC 3/4 inch Schedule 40 from under ground.. to gazebo slab with emt. what fittings can I use? thank you!

Do they make a plastic lock ring without a lip. I bought a male adapter and plastic lock nut, but the nut as a lip that only allows it to screw down so far on the male adapter. My panel is only 1/8 thick and the nut won't snug up because of the lip. Thanks!

How to connect 3/4 PCV conduit from the breaker box to Nema 14-50 that is 3 feet away? What kind of fitting is needed from the breaker box to 3/4 PCV conduit? TA + Lock Ring?

Are you supposed to prime and glue the flexible pvc? I’m running T 12 out to my pool. Thanks

Hello fam😆👍, I have a question. Is thhn wire ok to use in liquid tite flexible nm conduit for surface mount residential circuits?

Total noob question. For the LB fitting, how do you attach that to the wall? Or are you relying on the connection to the conduit?

can you use a lb conduit body inside a wall, instead of an elbow? and then enclosed with drywall. IF i dont splice they wiring?

How do you make solar extension wire going in a pvc LB water tight?

Didn't get the difference between box with screw hole and "regular" boxes

I'm coming out of the ground with a buried sch40 PVC up ~2ft to LB junction - how far off wall can I mount?

I noticed alot of electricians also forget to use expansion fittings for PVC in my area. Noticed the PVC that shattering and wires coming out on light poles and outdoor pedestal receptacles.

What is the little box called?

How do you ground when everything is plastic?

Im thinking of using 1/2 pvc conduit in my garage using 12/2 romex inside and metal boxes. For additional outlets. Is that doable. Am i allowed to put in two 12/2 romex in that 1/2 pvc conduit?

Can you use white PVC fittings on grey PVC pipes?

But are these pvc used outside? Thats what we want to know.

Why not put an LB or similar box at any turn or junction instead of an angled fitting? Maybe severe overkill but it seems it would make pulling much easier.

How deep should it be buried?

bending it is the problem to meet a box on a wall, they should make an offset piece to connect to a box and a pvc pipe attached to a wall...