Super Impressive Videos😊 I want to learn also about solidworks electrical may I know what should I learn step by step...

When I create a BOM from my SWE 3D after routing wires I can't find a drop down for the component Mark TAG. For e.g. R1 or R35 or C15 etc. I can find the Component Reference or Description or Part No but these show the references to the part linked not the actual mark in the schematic. So I want to list all the resistors, capacitors etc in my 3D model by their Mark AND have a column for the Description too. So I can see R1,R2....etc and R1 might be a 100K CFR and R2 might be a 68K CFR for e.g. Should I create this type of BOM from within the SW 3D space or the SWE space and how do I access the right TAG for the Mark? I know its there somewhere since in the 3D space the Electrical feature tree has all the resistor and capacitors listed by their Mark from the schematic. Its just not showing in the Part feature tree.

Hello, does solidworks is compliant to the british standards (BS7671). THANK YOU