Electrical System

Рет қаралды 7,970

3 жыл бұрын

An overview of the Electrical system. Normal and Abnormal Operations
I hope you enjoy the briefing. If you liked it 👍 please remember to Like, it really helps out the channel.
Thank you to those who currently support the channel.
If you would like to support the channel please visit:
/ airbuswhatsitdoingnow
www.buymeacoff...
Facebook:
/ airbuswhatsitdoingnow
Thanks again for watching.
Keep safe and 'Keep The Plates Spinning'

Пікірлер: 36

@kevinignatius5142 3 жыл бұрын

Thanks for all the frequent uploads. So much easier to understand after watching your videos rather than reading the fcom alone. Great learning aid.

@airbuswhatsitdoingnow320 3 жыл бұрын

I’m pleased you’re finding the channel helpful 👍

@cmilenko 2 ай бұрын

Thanks for your great informative content. Not sure if it's an oversight or error but you definitely have ND1 in ELEC EMER CONFIG as well. I don't believe it's been a mod along the way either. Cheers !

@airbuswhatsitdoingnow320 2 ай бұрын

Thank you Chris, I’d have to take a look back at it but you are correct. ND available once Rat on Line but not on Batteries. Thank you for taking the time to comment 👌

@SmartPaulSmart 11 ай бұрын

Fantastic review, big fan here.

@airbuswhatsitdoingnow320 11 ай бұрын

That’s very kind of you to say. I appreciate the feedback.

@24germ89 2 жыл бұрын

Dear Sir, first of all thanks so much for an amazing content! I can really see your true enthusiasm when it comes to the Airbus...happy to see someone to suffer from the same "illness" :) One comment concerning the INOP systems in case of the BUS failures, if I may. In case of AC ESS BUS FAULT both AUTO/MANUAL control of PAX OXY MASKS is lost. Might be worth mentioning the descent to a lower level should be considered, if encountered in cruise. Once again, thanks for your great job!

@airbuswhatsitdoingnow320 2 жыл бұрын

Thank you for taking the time to feedback. I’ll take a look at the point you raised. Much appreciated 👍

@misterp1755 8 ай бұрын

Seriously good stuff. Have a sub to v-prep and bunch of other stuff but this explains things in really simple and effective form. Thank you!

@airbuswhatsitdoingnow320 8 ай бұрын

I’m pleased you’re finding it useful. Thanks for the feedback

@MuTicaNVIII 2 жыл бұрын

Thanks for your all videos. They help a lot. Please keep going , best regards.

@airbuswhatsitdoingnow320 2 жыл бұрын

Im pleased they are helping

@phil121269 3 жыл бұрын

Very good video as usual Regarding the emer elec if I can add: DC ESS host LP fuel valve DC ESS SHED hosts HP fuel valve Regarding below 100 kts the batterie will feed as well the DC BAT BUS 👍😉

@airbuswhatsitdoingnow320 3 жыл бұрын

You may be right! The QRH calls for the procedure in any case. Thanks for commenting

@SKYWOLF8858 Жыл бұрын

I think you should elaborate about the GEARB model. If you turn on both the EXT Power ... Avail and APU, the aircraft will use electrical sources from the APU. If you press the EXT PWR .... On, then it will use EXT PWR.

@joaogalvani4678 3 жыл бұрын

On Batteries only, both FMGS are lost (24:05). Thank you for sharing!

@airbuswhatsitdoingnow320 3 жыл бұрын

Thank you for the feedback and you are correct. FMGC INOP. thanks a lot

@svdm007 5 ай бұрын

In elec emer on ground and below 100 kts, the DC BAT BUS is automatically connected. What’s the purpose of this compared to the configuration of flight with batteries only?

@rachelcarre9468 Жыл бұрын

Good instruction but i think using a mix of talking to camera and slides would enhance your content further. Slides would be easier to see and instead of us looking at your back, you’d have more time to talk about the concepts. You could even edit in photos/videos of components in. 👍👍👍

@airbuswhatsitdoingnow320 Жыл бұрын

Some say the back is better than the front! Keep watching, things get better….marginally!

@rachelcarre9468 Жыл бұрын

@@airbuswhatsitdoingnow320 😄😄

@droid12321 3 жыл бұрын

Please note that ESS TR is not powering DC bus 1 as you have mentioned at around 06:38 mark , it’s is AC1 to TR 1 to DC 1 :)

@airbuswhatsitdoingnow320 3 жыл бұрын

Good spot. It is of course TR1 as drawn (mouth and hands comms). AC2 TR2 is correct. Ess TR is mentioned later in Emer Elec. Thanks for the feedback

@hirantha12345 3 жыл бұрын

nice video :) Thank you in advance I have a question, How the EMERGEN maintain a constant frequency (400Hz)?

@airbuswhatsitdoingnow320 3 жыл бұрын

The GCU will have a Speed Governor or frequency regulator to maintain the frequency.

@hirantha12345 3 жыл бұрын

@@airbuswhatsitdoingnow320 Thank you so much :) I'm waiting for another new video :) great work :)

@doron.dsilva 5 ай бұрын

any videos on a350-900 ?

@airbuswhatsitdoingnow320 5 ай бұрын

Hi, we are 320 on this channel, although there are 330 pilots here as it’s much the same

@eugeniocoschignano2356 2 жыл бұрын

hi, nice videos that I'm watching with my greatest pleasure. I have a question around the minute : 20', if you have a failure in dc bus the engene won't shut down on the ground, so which switch are you going to press on the overhead panel ? I didnt understand exactly the switch are you going to press in order to shut down the engine. Thank you, Eugenio

@airbuswhatsitdoingnow320 2 жыл бұрын

The HP fuel valve remains open with this failure (Engine MSTR SW) and so in order to shut the engine down the FIRE PB must be pushed. The procedure is in the QRH

@eugeniocoschignano2356 2 жыл бұрын

@@airbuswhatsitdoingnow320 thanks a lot, very clear explanation. I'm Watching most of your videos and they are really useful. Clear details and explanation, much easier than cbt with many stuffs in the cbt that makes the thing really difficult to understand. Thanks a lot once again.

@airbuswhatsitdoingnow320 2 жыл бұрын

@@eugeniocoschignano2356 it’s a genuine pleasure . Keep safe

@prl2508 2 жыл бұрын

Thanks for that excellent video ! Just one question : when in EMER Elec Config, if suddenly one GEN (1 or 2 or both) runs again, can you recover all the systems and subsequently exit from the Elec Emer config ? Same with the APU, if you start it, will it power something or just run for nothing ? Thanks 🙏🙏

@airbuswhatsitdoingnow320 2 жыл бұрын

Hi and thanks for the question., If we think about the priorities given Airbus likes Generators, as soon as a gen is recovered and able to supply the AC busses then normal elec config is resumed and you emerge from the dreaded Emer Elec Config! From memory it might be that That the Ac and DC ess busses will still be maintained by the RAT until is stalls.

@prl2508 2 жыл бұрын

@@airbuswhatsitdoingnow320 thanks ! Make sense. So if you loose both engines…. Start the APU Asap ! 😅

@airbuswhatsitdoingnow320 2 жыл бұрын

@@prl2508 Below FL250 in emer elec config