Рет қаралды 1,953,475
The 6 Worst MISTAKES!! that you have to AVOID when soldering with TIN. In this video tutorial of Easy Projects with ENGINES and other machines we will see tips and tricks. The 6 basic mistakes that you have to avoid if you want to solder well with tin and soldering iron and have a perfect solder. The advice in this video is from my point of view, the first mistake is not adding good quality tin to help remove electronic components The second mistake is using poor quality tin. We can add a little flux to help the tin adhere better. The third mistake is to support the soldering iron or soldering iron on the table without a special base for it and with the electrical risk of burning. the table or burning yourself, the fourth mistake is not protecting the tips of the soldering iron or soldering iron with some new tin, the fifth mistake is using sandpaper to clean the tips of the soldering iron or pencil soldering iron and thus end up rusting and carbonizing them, and the sixth mistake is not cleaning the work area to be soldered and not removing the grease, oil, dirt, etc. and when you start soldering the tin does not stick well and you cannot solder correctly. If you like the video, don't forget to leave your like thanks