Excellent explanation.. now I can see why its somewhat normal for these to just naturally start to fail around 70k miles on the car.. now I don't feel so bad changing it out.. nice vid

Wonderfully explained. I have BMW E70 X5 went into limp mode with trouble code 2CF8, 2CF9, 2CFA Throttle-Valve Potentiometer 1 & 2. This helped - new throttle body. Saved money, time and alleviated my frustration. Thank you.

I took the throttle body off my 2004 Volvo V70R(it's a job), and it looks exactly like this one. Inside the sensor I see no teeth wear, and I cleaned the contacts. My Volvo has 129,000+ miles on it. Great video!

Amazing video with clear explanations! Very helpful! One very interesting thing that I got to know from this video was the small oscillatory motion of the potentiometer's wiper arm against the resistive tracks which leads to some wear.

Excellent presentation -- the most helpful I've found about the throttle body.

Great explanation and excellent up close video pix of the worn parts. You are the Man!

Great video! Thank you. These suckers are expensive as hell, and now I know why/how these get re manufactured, new gears, , gasket, clean it up and resell for $150.....Bought one of these aftermarket, and having similar issues just 6 months later. I am cracking open to see if I can fix now.

This is a great video and explains clearly what is the root problem of a worn out throttle body malfunction. Check this first instead of buying endless cans of cleaner spray. Especially if the car has done a lot of miles

This video is excellent!!! I love the no bullshit approach and it has all the info I need to look at my throttle body and what to look for and where to look on my VW Polo Match 9N. Good work guys!

Finally a good explanation. Question for anyone who think they know. I was getting some strange throttle position readings on my scan. I have an Accelerator Position Sensor and this Electronic Throttle. When I checked, the butterfly is open all, when I try to close it manually, it opens back under spring tension. When I start, it still stays open. I opened it up, cleaned it out although it was pretty clean already, tested the motor, it works. Im debating whether it is the throttle, or the sensor on the pedal. Thanks..

Great job in explaining just what is inside the TB gear head and how it all works.

Great video, explains some of the intermittent issues I was having with my Bosch Throttlebody on Audi Rs5, only 80,000 and 10 years, but occasionally goes into limp mode with everything connected to the PCM flashing up (Stability, Sport Diff) which of course cascades to the TPMS and Handbrake. Not cheap to replace 2 thats for sure :)

Very helpful and great explanation of all possible failures!

11.4.17. A superb tutorial! ......Concise explanation!🎯

looks like maybe you fell off the youtube sphere but man, this is an excellent explanation. Thank you so much for taking the time and honestly saving me the time of opening mine up to try to rebuild it. is so much more likely that the gears shelled each other out than that the traces or solder joint failed.(as was my previous hope) Awesome vid and would be thrilled if you came back to it.

Awesome vid. I have an '05 Tundra V6 w/ 140k miles. Recently cleaned my throttle body (yes, with it disconnected from the vehicle), put it all back together and it threw a p2103 code. The plate covering all of the electronics and gears on my model is riveted in so I wasn't able to take it off and check things out. I'm going to do a resistance check on it tomorrow and if it's out of the specified range maybe I'll just drill out those rivets and have a look. Liked and subbed!

Took me back to my MV-Engineering days in college. Many thanks!

Loved it! Great way to see the inside of a throttle body Cheers

Great little video. Hopefully helps me solve issues with my 2006 Alfa 156!

Thanks god someone made this video !!!!! Now I understand ! There no way that someone can rebuild this! Thanks you again !

You the best Throttle body expert around bro :)

Sir, appreciate for making things clear. When I check my car's electronic throttle body with Forscan, desired and actual throttle position does not match. There is 2.3° difference at idle and 5°-7° difference on load. Desired position 2.5°, actual position 0.3 at idle. Would it be sth to do with these plastic craps?

I also want to say thank you for your video. I forwarded your video to the mechanic working on my car, given I currently am experiencing this issue. I have to go with the simple acknowledgement of plastic parts tied to electronic sensor is a lousy design.

I just cleaned my throttle body and it was very dirty. would that cause a unimtended accelleration situaton?

Great video with good in-depth explanation, could issues with the throttle body cause problems with a delay in 2007 V70 auto gear shifting or harsh kicking when shifting from park to reverse?...

Thanks you for the quality video! Great tips for diy! I learned something new here!

Thanks. where to buy parts to fix those? Also thank you for showing that it is ok to move the plate after disconnect.

Super duper good explanation and quality video with great detail

Sir ji i had watched your video of cleaning uva car throttle body cleaning n i had done cleaning for my spark car and ac also functioning smoothly but it still stalling bit. So what woud be the reason.

Excellently explained. Bravo....

Excellent Tutorial. Well done and thank you.

Hi, I have the same set up on my jet rib it's 2cyl turbo, the throttle body work fine with engine off but as soon as engine is running it doesn't respond to the throttle or rev up.? It's a new throttle potentiometer, where does the signal go from the throttle before it gets to the throttle body? Is there another sensor that could affect it like air flow S or the ecu would control it?

Oh my gosh this was so helpful now i know why my Sti is stuck in limp mode with an aftermarket TB i tried to get away with using a rivet style body and a clip on style tps cover but ill probably just order a new stock one since its probably worn... I always could hear the connector buzzing (i got a new connector plug on the way too)

Great explanation I learned a lot thanks !!

How do I adjust the throttle when at idle I am having trembling problems during idle , I have a 2006 Nissan Pathfinder and it has a electric throttle body

is it possible to replace the gear with metal material?

Sir, Excellent video. Very well explained.

Fantastic. Very educational. Congratulations on the great work. Thanks for sharing knowledge.

Thanks, very informative!

Have an issue with mine in my 2007 Jeep Grand Cherokee Laredo 3.7L. I'm gonna replace the throttle body. I heard I'll have to do a relearn procedure. And I also heard I don't have to on the wk's. What do you think I should do?

icemaker gears work somewhat the same way and what would happen is the sweepers would eventually scrape copper off of the gear wheel, and bridge the circuit across the gaps.

All Renault Clio II drivers should like this video...all throttle bodies of this car fail at 80 to 100k klm... So so common...renault Clio II throttle body is almost identical to this one. Managed to open and save mine for about 10thousand klm but then a tooth on the gearing broke completely.. There is Bosch potentiometer in the Clio throttle body which never fails... What brakes is the plastic gearing. So payed 150euros for a new aftermarket throttle body(original costs about 500euros if you find it).. Thank you for the useful video. LIKE

So informative. Having my 2015 F150 throw this code while on the highway and going into limp mode sucked

How is actuator control motor setting done in drive by wire throttle body to get a desired iddle speed? Could you show me?, illustration with a video would be better.

Excellent brake down cleared up a lot.

I tried cleaning this on my 2011 fusion and the wrench light came on. Sputtering and crappy gas mileage . I'm sure now that I saw this video that it probably needs replacing. Another thing....do you have to recalibrate it when you put on a new one or clean it for that matter ?

Excellent informative video, thanks👍

I've been having issues with my car and I suspect it's the thottlebody with the integrated Throttle Position Sensor. It's nice to see a tear down of it. Nice video.

Does the throttle always show codes? I have C30 2.0L and it has issues starting, it turns over, has spark, but it is not getting any fuel. The fuel pressure is good, the issues is that injectors are not getting any signal to engage. But sometimes it starts fine and will drive for hours without any issues. Do you have any suggestions? I am at a total lost

vw polo still goes into limp mode, with EPC light on, eventhough Throttle body is fairly new, Map sensor fairly new(both calibrated at the time of replacement), no obvious intake leaks. Any thoughts? TQ

I have this issues on my Nissan Livina... Thanks for the video...

How would you replace the motor if that was the problem?

So what about the sealing? Can I replace the sealing in the throttle body 48CPD1 (OPEL, SAAB, FIAT, ALFA ROMEO) to avoid leaking oil inside the body?

I have a VW throwing codes for throttle actuator control and won’t let it start. Do you know what the likely cause of that is, or do I just need to start digging into it?

wooooooooooow, got a p1220 error code; am gonna rip open my throttle position sensor with confidence now. great video

As I understand the throttle body and ECU system works like the potentiometer is connected to the ECU and the throttle body motor pins are connected to the ECU. so turning the potentiometer( pressing the gas pedal) will turn the throttle motor and the valve will open and close. But I do not have a potentiometer in my project setup, I have a passenger counting script written on a raspberry pi ( that replace the ECU) and the passenger counting result will decide on closing the throttle valve. but In my local store, I have seen throttle body ( together with the engine model for academics purpose) motor has 7 sockets like male pins to connect to the ECU. how do I connect them to the raspberry pi or Arduino?

Thank you that video helped me a lot I do have one question when I put mine back together I can hear that metal gear loose in there is it supposed to have a lock nut or something on it

Hey can u help me my Scion TC 2009 throttle body keeps going out

I have an issue at honda code from obd is P1659 its related with etcs, while this issue come and check engine indicator On then the speed of my car drop then i tried to press the throttle seems not working. Please advise me in advanced

I thought I'd do something good and clean my throttle body but now I have a tps error and traction control light came on went into limp mode reduced power. Anything I can do to fix this?

Thank you for your help.

I have a really bad issue with throttle body. Those 4 sensor pin is damage and my accelerate is not working at all. Can you please help out?

Excellent tutorial. Thanks

Hi I have hesitation and jerky acceleration, not able to rev all the way, can this also cause RPM to get stuck?? When that happens I flip the gas pedal and it gets unstuck.

Very well explained, thanks

thanks that answered my questions. I am going to get a new one and don't mess around with it.

wow, thanks for this info! greatly appreciated

Great explanation. Thanks

Hi my cars got a electric throttle body an some times wennim driving i have to like lift my foot off the peddle an then bk dwm for it to pick up an also wen cars been at temprichur an i switch it off for like 7 to 10mis an restart it my engine like gose to 2rpm then comes bk dwn which is not normal an should not do that do u think thats an throttle issue or something ells..getting no codes tho..

I have a 99 Cadillac DeVille, when I hit the gas to accelerate it dies down I put a new idle control sensor in a throttle body position sensor what can still be the problem and make it not accelerate.

How you opened the cover those clips don’t come out ??

I spray throttle cleaning spray inside throttle body means inside gear spring assembly,any problem will occur?

In fully closed position does the throttle still allow some air to flow ?

Have you had any problems with the 2013 Ford edge Limited throttlebody doing that because mines doing that is there a way that I can fix it till I can afford a new throttlebody

Thank you guys for kinda answer.

I got a 2014 s60 that is throwing P1573 code and would not stay idle it just shuts down, do you have any Idea what could be the issue?

Thanks bro. Appreciate your vid. Best out there

Excellent video. I have an 05 Tundra, could this also cause a hesitation in throttle response from 2,000-3,000 RPM while accelerating?

Can a failing throttle body cause misfires and a p0506 code? I have never gotten a throttle body code. I drive a 13 odyssey. Thanks.

I've got an '06 XC70 that's throwing MAF codes, fuel trim, O2. New MAF, new plugs, cleaned the TB. No codes for TB, but thinking this could be the problem, since I didn't check the gears and POT when I had it off. Going to check PCV too

2006 S40 T5, 255K miles. Here seems to be a good place to share the following (this video helped me resolve my issue). SYMPTOMS: Constant P2281(Air Leak between MAF and Throttle Body) and random misfire on all cylinders (P0300, P0301, P0302, P303, P304, P305). Also, intermittent P2188 (System Too Rich at Idle) and P0170 (Fuel Trim Bank 1). TROUBLESHOOTING: In the last almost 2 years, changed pretty much everything there is to change (Spark Plugs, Coils, Injectors, VVT Solenoids, Turbo Check Valve, Camshaft Position Sensors; fixed failing insulation on several wires of the main engine harness, even considered replacing the ECM), cleaned Throttle Body and MAF, still constant misfire and P2281 😞. Watched this video, disassembled Throttle Body, expected to find worn gear teeth (255K on the beast and clicking sound from the throttle body), teeth looked good. Potentiometer tracks and contacts looked good as well, no unique wear. PROBLEM: Since already there, checked resistance directly on the motor contacts, got between 28 and 35 Ohms while turning the rotor (should be around 1 Ohm or less). Removed the two screws and pulled the motor out, found significant carbon buildup on Commutator, brushes still had plenty of material. FIX: Cleaned/scraped/sanded/sprayed Commutator as much as possible (access is a bit challenging), got to shiny copper (even if not too smooth), got resistance down to just over 1 Ohm at the motor. Note: On my particular model (2006 S40 T5), the motor resistance can be checked between the throttle body's Pins 1 and 4 (a bit hard to access while installed on the car; as an alternative, use Pins 74 and 75 on the larger connector of the harness that attaches to the ECM at the front of the air box; look for single-digit Ohms, preferably less than 2 Ohms). Reassembled, installed Throttle Body, not a single code after 100+ miles (before that, codes were usually popping up within a few miles) 🙂. PROBABLE FAILURE PATH: Due to gradual carbon buildup on the throttle body's electrical motor Commutator, the motor eventually lacks sufficient power to counter return spring force and intermittently lets the throttle body Plate move towards idle. This causes unexpected pressure difference between sensors within the intake path (P2281). These short random failures (less air than what the ECM commands) catch a particular cylinder off fuel/air balance, eventually causing misfire to all cylinders. A prolonged failure would be registered as rich mixture (P2188 and P0170).

I may have this gear wear problem on my 76,000 mile Corvette Z06. The engine jerks a bit at low throttle. If there is play in the throttle body gears, I could see how the butterfly may be flopping around a little.

Thanks for the explanation. My car is 2012 Jetta and draws P0122 code and I suspect the throttle body. So I pull it out from the car. If I shake the throttle body, I can hear some clicking noise inside the throttle body. Does it mean my throttle body is not normal? Before ordering a new one, I want to get your advice. Thanks.

Hi ... How I can remove main gear, is it possible? I have a problem with 4 contacts located in that gear. And is it possible replase that contacts? For example in my gear 2 contacts is bad.

Excellent video, Very well explained. I have a 2008 Mazda 6 (Brisbane Australia) which has suffered a flat battery overnight. I believe caused by the Throttle body being energised even after car switched off overnight. I could hear the bzzing this morning when I checked under the bonnet. Confirmed when I disconnected the cable to the TB. My question is Can I easily replace the motor assembly of the TB, and how do I do it?, or do I just go an buy a whole new TB? Nick

I had my friend step on the gas pedal to see if the throttle body opens it did not open at all my car had stall on me on my was home I had no power it won't pass 2,000 rpm it's throwing misfire codes I put a new maf sensor and I put a new air filter would that give me that problem

Would a stripped tooth cause it to make a clunking stripping sound when I turn the engine off?

YOU NAILED IT!

Really well done thanks.

On a 2004 350z, with NO check engine light...of that liquid seeping into thru the shaft would that disrupt....Accelerator Pedal Position sensor to not have good response? At a stop light, pressing the gas pedal to the floor, car does pick up speed quickly, another words "fast off the line." Brand new, not rebuilt, OEM MAF sensor installed, I may have to buy a brand new Throttle Body for this issue. Please, feel free to comment on this. Thanks!

My Subaru after warmed up will sit at 1300rpm. Could this cause a (P0507)high idle?

So what is the right way to clean the throttle body of my honda CRZ? I shouldnt take it off the car ?

I changed the throttle gears due to wear but the engine didnt crank and start !!! Do we need some sort of resert or programming sequence to reset the tp sensor values??

Excellent video thank you

How do l open the that black cover of the throttle body cover of the Chev utility

As there any sensor in electronic throttle body as cable throttle body have (IAC valve)

Hello would this stop a car from cranking?

Nice and useful video

If the valve was fail to close, any suggest solution?

As you mentioned, that Bosch Throttle Body is very similar to my Mercedes. Believe Porsche also uses a similar one. The difference is found on the Bosch Part number. Moving to the curve ball. I'm experiencing issues with the Throttle Body and had the same logic. Saw how to clean the flap and the electronic part. Contacts on the potentiometer seem to have regular wear. However, I never saw how a known-good should look like. Definitely not gunked up. Just black dust. The tabs on the flap gear were clean and intact, as well as having all the teeth. The teeth for the driving gear (between DC motor and Flap gear) are intact. Cleaned the contact on the cover (dusty dry), even for the DC motor. Can it be the DC motor or one of its components? (Didn't remove it because I don't have a spare one) Can it just be the plug on the wiring loom?