Electronics We'll Need For Summer Cruising - Ep. 306 - Acorn to Arabella: Journey of a Wooden Boat

No video

Electronics We'll Need For Summer Cruising - Ep. 306 - Acorn to Arabella: Journey of a Wooden Boat

Рет қаралды 47,937

Күн бұрын

Steve and Robin sift through a good amount of mail that’s been piling up. Be sure to pick up issue 297 of WoodenBoat magazine and check out the Launchings section to see Arabella's feature! With a climbing guide book for Nova Scotia and Newfoundland in hand, they can start planning their summer adventures-huge shoutout to the local folks who have provided support, advice, and overall amazing hospitality.
Back in Granby, Steve spends time supporting his mom and dismantling the last of the boathouse. While in the area, he opens more mail, including some books and lines for the reefing on the main mast.
While there’s a pocket of okay-ish weather, Steve works on getting as much work as possible completed on deck and up in the rig. He works on hoisting the sails and tying the lines, and comes up with a clever solution to install the tri-colored running light and wind reader on top of the main mast.
Of course, this pocket of weather doesn’t last too long. With Robin away and the rain returning, Steve takes this opportunity to transform the cabin into a workshop. The plan is to assemble as many electronics as possible before they make their way on deck.
Hopefully spring weather makes an appearance soon, because all of us-including Akiva-are tired of it.
--------------------------
Sign up for our email newsletter: eepurl.com/hn3Qyv
Acorn to Arabella started as a wooden boat building project in Granby, Massachusetts. Steve began the journey as an amateur wooden boat builder crafting a 38' wooden sailboat in his backyard: designer William Atkin's Ingrid with a Stormy Petrel's gaff rig. These videos follow the journey from tree felling, to lumber milling, to lofting, to the lead keel pour and now sailing the boat-sharing details of the woodworking, carpentry, metal smithing, tool building, and tool maintenance that traditional wooden boats command. This ultimate DIY project continues beyond the boat shop, as Steve and crew travel and learn to cruise aboard the handmade wooden boat that they've built. Just kidding about all that, this channel is about a Siberian Laika named Akiva.
--------------------------
If you are interested in supporting/helping here are a few ways:
www.acorntoara...
Acorn to Arabella's wishlist:
www.acorntoara...
TotalBoat supports A2A! Please consider using our Total Boat referral code. Click here, then shop: www.totalboat.... They'll kick 10% our way!
To offer recurring support via Patreon, CLICK BELOW. Just $5 a month gets you an invite to our monthly patron-only livestream Q&A sessions!
/ acorntoarabella
Original Soundtrack available at benfundis.bandcamp.com
FOLLOW US:
Patreon: / acorntoarabella
Instagram: / acorntoarabella
Facebook: / acorntoarabella
Website: www.acorntoarab...

Пікірлер: 174

@Chr.U.Cas1622 3 ай бұрын

👍👌👏 2) Steve, is there anything you can't do? Kudos! Best regards, luck and especially health to all of you, including cute Akiva 💚 of course. I simply love dogs

@fredflintstone8048 4 ай бұрын

Happiness is having a good woodworkers vice and workbench on one's boat. Happiness for a man is also being able to do his projects in peace and quiet.

@JoesWebPresence 4 ай бұрын

HDPE plastic (the cutting board) is wonderful material. The only plastic you can safely melt at home in the oven. (180c or gas #3.) I save all my old milk cartons, melt them into trays on grease proof paper, allowing them to cool down slowly so as not to warp, then I cut them into strips. I make all kinds of brackets with holes drilled exactly where I want them. I no longer use wooden stakes in the garden. These are stronger and don't rot. Cutting boards are ideal for either of these.

@Myseadreams 4 ай бұрын

Except that white HDPE has no UV stabilization. Black HDPE typically has 2% carbon black that adds to the environmental UV resistance .

@JoesWebPresence 4 ай бұрын

That's true@@Myseadreams and if it was a thin sheet, that would be an issue, but how long would you estimate it would take for UV to compromise that particular slab of HDPE? Ten years? Twenty? Other plastics would go brittle far quicker, but not that one. I've done some experiments in the field, and I would estimate it will last at least twenty years if not longer. I'd expect the electronics fixed to them to become obsolete and need replaced before they do, and when they do, another chopping board will do fine. I'm sure it could have been done with a UV resistant product for £59.95 or custom made in a mould, adding carbon for UV stability. Heck! It could have been carved out of mahogany and given twelve coats of the best yacht varnish, but Steve found a cheap and effective £3.99 solution. I don't know who said it, but there's a famous saying from WWII: "An engineer is someone who can solve a problem for 25c that any fool can solve for a buck."

@worldexplorer75 4 ай бұрын

Steve doesn't need coffee in the morning, he has all the electronics to play with to get wired. Great episode. I can only imagine the anticipation of turning on the systems for the first time and seeing all the new data on screen, always an exciting moment.

@donchonealyotheoneal5456 4 ай бұрын

Since when does a sailor ask for no wind? I thought that was cute And Akiva is just the cutest. He's like dad. Why you afraid of rain? Let's go outside and play in rain. I'm hoping you don't have to raise the water line after adding all that stuff.

@TimTraceyBladesmith 4 ай бұрын

Glad the log book cover worked out! Appreciate the thank you in the video. Not necessary at all, but thank you!

@AndrexT 4 ай бұрын

'Bladesmith'? You make knives and sheaths as well? Lovely leatherwork. I am (or was) an apprenticed knifemaker.

@AcornToArabella 4 ай бұрын

The covers are beautiful. Thanks again!!!

@TimTraceyBladesmith 4 ай бұрын

@@AndrexTyep, that's how I got into leather work.

@TimTraceyBladesmith 4 ай бұрын

@@AcornToArabellayou're very welcome.

@26N80W 4 ай бұрын

That workbench and vice on a boat the size of Arabella's is amazing.

@zzflash1 4 ай бұрын

I live on the East Coast of Nova Scotia, and I’ve watched your channel since you shaped the keel timber. I can’t wait to possibly see Arabella,and meet you, Robyn and Akiva.

@tbjoyrider 4 ай бұрын

Akiva isn't bored. He just wants some attention and some tender loving, while he has you alone, Steve. Half an hour of belly rubs and chin scratches will go a long way 😊

@juliancrooks3031 4 ай бұрын

Captain Akiva wants to go ride the waves. Bored from too much shore leave😊

@joedoe6444 4 ай бұрын

Akiva; "i can sit here and stare at you all day with this sad face or you can take me out for a walk. the choice is yours human".

@Tillersweep 4 ай бұрын

I used some plastic (teflon) for a project and put some bolts through it. I tightened them as you did and put it away. I came back to it a week later and the bolts had loosened. I tightened them. I did that several times before I realized I was dealing with PLASTIC. It moves. It keeps moving. You might check this in a few days and find despite locking the threads they have become loose.

@paultreiber5597 4 ай бұрын

I have used the same sort of cutting board for an outside project as well. They get very brittle in the sun. I think mine lasted maybe 2 years. It was also subject to high impact.

@ryan_mcme 4 ай бұрын

Good morning, 'bella fam! Happy Friday and happy Easter!☕🐣

@frompinetopalm 4 ай бұрын

Happy Fridayyyy!

@mrfish270 4 ай бұрын

Happy Friday, brother.

@dcmflydude6320 4 ай бұрын

Just a shout out to Ben….great job on the videos

@terrygleeson8480 4 ай бұрын

In my experience, white plastic cutting boards aren’t very UV resistant. Keep your eye on them.

@ormmeford2204 4 ай бұрын

Love the puppy dog 💗

@markwaters8907 4 ай бұрын

Good morning, Happy Easter from Tasmania Australia, thank you for my weekly fix. 😊

@fonhollohan2908 4 ай бұрын

The Hospitality in Nova Scotia and Newfoundland will blow your mind. Its like family I know I was born and raised in newfoundland til I was nine years old my oldest brother and sister still live there. I'm living in Ontario now been here most of my life. I'm looking forward to seeing your adventures Steve and Robin should be exciting adventures. Praying for you Mom and family God bless." He's only had two walks today and its already lunch time! " You've got it so hard Kiva poor little guy. lol

@TribleNerd Ай бұрын

As a guy who has been around the world, and sailed in ships and what not for the better half of 4 years now... YOU ARE A SAILOR. May not have sailed as much, but you find the cheapest, and most round about ways to do something that would already have been easy. That is a sailors fix.,

@xrtim 4 ай бұрын

Hoping that nylon or plastic the cutting boards are made of don’t degrade or get brittle from UV. No real way to know without letting some time go by in the sun.

@johnkruer7557 4 ай бұрын

I read the "The boat that wouldn't float" 30+ years ago and still have it. Fun read...

@toddbrown2236 4 ай бұрын

Great video. You have the mind of an engineer, Steve. I really like how you methodically plan and execute your projects. Your improvisational skills are also really good. Lastly, the opening scenes with Robin really showcase what a wonderful couple you two make. It's obvious that God put you on earth to be with each other. Thanks for sharing your journey with us. God bless and Happy Easter!

@KingJellyfishII 4 ай бұрын

Why not use a small piece of wood to mount the masthead light and wind vane? At least that would avoid any concerns about UV deterioration of the plastic

@bartrupel 4 ай бұрын

Hmmm, usually the activator is applied after the cyanoacrylate. By putting it in before, the adhesive might cure before it wicks into the threads. Not sue the cyanoacrylate is the best choice here. I would suggest something intended for threadlocking, like Loctite 242... I too have concerns about the use of HDPE, it will cold flow. G10 would probably be a better choice.

@shiraz1736 4 ай бұрын

I hope the chopping board plastic can handle the UV,s.

@OneEyedJack01 4 ай бұрын

Sharpies aren't as permanent as most think. A non-polar solvent will easily remove it. Toluene, acetone, or a concentrated alcohol work pretty well.

@SolarPlaceFarm 4 ай бұрын

I don't think the cutting board will last. I have tried using them in similar applications. They bend and crack over time. Good luck.

@somebodyyyyy806 4 ай бұрын

UV might be an issue for some plastics

@ianhine4012 4 ай бұрын

I've used it before and didn't last more than 6 months in the Australian sun as it breaks down from UV exposer, Ok for a temporary fix for something not a permanent installation.

@John-B69692 4 ай бұрын

Steve, if you want a more even temperature inside your fridge, install a little fan to circulate the air.

@AirmanJack 4 ай бұрын

even a cheap USB powered computer fan would do wonders to help

@John-B69692 4 ай бұрын

@@AirmanJack Yep

@volvowagn 4 ай бұрын

I use an old PC case fan wired to a wall wart power supply to keep an even temperate in my chest freezer that I converted to a kegerator

@Ayns.L14A 4 ай бұрын

Happy Good Friday everyone .....

@frompinetopalm 4 ай бұрын

Happy Fridayyyy, Aynsley. :) -Annie B

@samuelfox3997 4 ай бұрын

Well done

@RobertFay 4 ай бұрын

*- Just before you got to the Dielectric Silicone Compound shot **18:15**, I was worried about corrosion issues with all those plastic connector points. Phew!*

@jimindyjim 4 ай бұрын

You will love “The Boat That Wouldn’t Flout”. One of the funniest books I have ever read. It was years ago.

@kenbutcher5158 4 ай бұрын

I did something similar with cutting board and you might want to replace soon with G10 as the cutting board will yellow and warp in the sun quickly

@frompinetopalm 4 ай бұрын

G10 is great stuff.

@paulg1992 4 ай бұрын

Came here to say the same.

@jonpratt1343 4 ай бұрын

What you said. Especially one that thin. I’m a chef. Hot water will bend poly cutting boards so I would imagine the sun will do the same.

@boblister665 4 ай бұрын

The boat that wouldn't float great reading about the waters you are heading for.

@stevelansdowne 4 ай бұрын

I got a chuckle seeing you near the top of the mast with your backpack full of items to be installed there. The blade on the wind speed indicator made me think of a very small helicopter blade you might use to fly off into the horizon!😂

@Mark_Bridges 4 ай бұрын

Steve: "you'll never know it was a cutting board on the top of the mast" on a public video. Hopefully everyone who visits the boat from now on will ask "Hey Steve, is that a cheap cutting board on top of your mast?"

@andypughtube 4 ай бұрын

It's only the US that keeps eggs in the fridge (well, maybe other places do too). There are basically two ways to keep eggs fresh, but I don't think you can swap between them. When Robin Knox-Johnston sailed round the world he waxed his eggs and they lasted the whole journey. But those were probably european-style unrefrigerated eggs. There are several KZfaq videos on this subject.

@GaiusSonofGermanicus 4 ай бұрын

Have you thought about UV and the plastic cutting board? I'm not sure what plastic It's made from, but I would guess it's likely to be high density polyethylene, which has a pretty poor UV resistance. I'd suggest you check the materials property of what you're using and allow for that in the maintenance schedule.

@badcat4707 4 ай бұрын

Good morning Akiva and Crew 😸😺

@toad7487 4 ай бұрын

You are going to love the Farley Mowat book, it's hilarious!

@manifold1476 4 ай бұрын

concur

@juliancrooks3031 4 ай бұрын

Usually when I make a mess like that in the cabin is when the Mrs. would come home early and have a fit. 😮

@billlippincott3937 4 ай бұрын

Steve and Robin will definitely enjoy the hospitality in Nova Scotia. We did a family trip many years ago. Steve loved the “explosion” in the cabin! Cheers.

@frompinetopalm 4 ай бұрын

Probably wouldn't surprise you that my people on my dad's side are Nova Scotian. :) We're from Saulnierville and Comeauville. And of course we're Comeaus. Everyone is. hahaha See ya soon, Bill!

@UNRELATIVE 4 ай бұрын

You may have a future video entitled "Replacing the cutting board on the masts due to UV exposure."

@rick91443 4 ай бұрын

Happy Friday...Tomorrow we change the hour here...rr Normandy, France

@jacou293 4 ай бұрын

Nous aussi en Bretagne 😂

@ericanderssen6816 4 ай бұрын

Keep some paper templates for the mounting you did on the cutting boards. Cutting boards aren't quite UHMWPE (lower molecular weight) and all PE degrades kinda quickly in UV. Keep an eye on the fasteners even tho you locked them with CA--thermal expansion/contraction of polyethylene is stupidly high. Probably plan to replace the mounting plates with G10 or G11 plates in the future. Happy Easter! I've been watching since the lead keel pour which got my attention.

@robinmidgett3347 4 ай бұрын

Or use a nice piece of rot resistant wood coated with fiberglass & epoxy.

@charlesmoore456 4 ай бұрын

I can't wait to see all those new toys in action!!

@Tomhohenadel 4 ай бұрын

Thanks Ben. Well done video. Happy Easter to all the viewers.

@TRACKERDAVE7 4 ай бұрын

Paint that mount you made. Cutting board makers might not be concerned with ultraviolet resistance.

@timothyhoyt8215 4 ай бұрын

That was a very intense stare down with Akiva. I hear ya on getting things done around the house when your on you own. My wife will go home to see her family and I will stay home and work on the house. I get so much more down when I don’t have to clean up at the end of the day. The dog is not happy about as it cuts into her beauty rest but she gets over it. All the Best Tim

@charlestosi5199 4 ай бұрын

Brilliant problem solving on main mast installation.

@MaShcode 4 ай бұрын

The classic stink eye. Akiva will not be denied!

@JesseHersch 4 ай бұрын

The Farley Mowat book you received is great, definitely some Happy Adventures are ahead of you when you go to Newfoundland! I am certain Arabella will float better than Happy Adventure did!

@thill6771 4 ай бұрын

I do not envy your wiring headaches. The slow camera turn around the cluttered cabin to your dog's pleading face was great!

@Slikx666 4 ай бұрын

If the boat was just a little bit bigger there would be room for a treadmill for Akiva, he could just have a run without getting wet. 😄 It would have been great if all the wiring was in a loom like in a car, it would be so much lighter but it would need to be custom. 🤔

@TomLeg 4 ай бұрын

Plastic cutting boards are so great for all sorts of projects

@michaelkelley6158 4 ай бұрын

Great music, Ben. Also enjoying the drone footage.

@joecioe8566 4 ай бұрын

I also use plastic cutting boards to make things. Good luck with your mom.

@tl4ever262 4 ай бұрын

Love the episode. I use plastic cutting boards as a go to source for my hobbies too.

@Pocketfarmer1 4 ай бұрын

When you are sailing along and ask your self ,” I wonder if I should put are reef in ?”. The time to put it in is somewhere between the ,”I wonder,” and the “if”. Just a tip.

@worseorbetter 4 ай бұрын

I hear you about the weather as it rains every weekend here.

@frannappe2719 4 ай бұрын

excelent episode guys, hope your mom gets better soon!!!

@user-hq1nq7mh5p 4 ай бұрын

Another great episode !!!

@1147cc 4 ай бұрын

hope you can fit all those cables with the big ends down the mast.

@michaelweitzner9874 4 ай бұрын

Electronics are great. However, for cruising please get a sextant and magnetic compass. Also, a pilots compass that you can see overhead from your berth.

@president2 4 ай бұрын

Love it so much keep it up as always 💘

@lesmewis5291 4 ай бұрын

You might also want to make a small side trip from Newfoundland to France. Only a few kilometres to St.Pierre and Miquelon!

@erikwilliams7009 4 ай бұрын

Farley Mowat's little book is a super classic. I was raised on his work, by my dad, who also got me going on sailing and boats generally, and that book- that was the first one in the process. Did I mention it's a super classic?? Enjoy!

@joefedele4810 4 ай бұрын

Speaking of Nova Scotia, stop at Peggy's Cove if possible. Very picturesque.

@randolphfriend8260 4 ай бұрын

Akiva's eyes lit up when you said, "... a four or five walk day." 😁 Take care of your mom, it's the best. ❤️ 🙉 SO much MORE electronics! 😳 💙 Ben, - needs his own "special names." "Keeper of difital" . "Digitizer" . "Hidden link" etc. (maybe not every time, maybe every time) 😁

@randolphfriend8260 4 ай бұрын

"digital" not difital, 🙉 🤔 maybe "Remover of difficulties" . "Updater of posts"

@bartjohnson8139 4 ай бұрын

Shoulda, woulda, coulda, the number of electrical issues I’ve prevented and corrected with dielectric grease is, well, lots and lots. It’s always better to use it than not. If there’s a high humidity issue, use dielectric grease on every connector. It doesn’t take a glob, just a thin film, even on spade or screw connectors, it’ll improve conductivity. Pro-Tip, even use it on exterior household electrical connection, over time, “weather proof” electrical boxes, aren’t.

@robinmidgett3347 4 ай бұрын

Dielectric grease is an insulating material..it cannot possibly increase conductivity. It's primary use is as a moisture barrier to prevent corrosion due to moisture exposure on electrical connections. If used appropriately, it will prevent corrosion, which degrades conductivity, but the grease can't increase conductivity.

@TotalBoat 4 ай бұрын

Great episode! I think we are all waiting for the weather to cooperate! 😅

@richardsybrandy1 4 ай бұрын

My husky is doing that right now too. Great episode. I mean that.

@MyOLD36chevy 4 ай бұрын

I like Akiva your 4 legged pillow.😊

@philparmenter53 4 ай бұрын

Greetings, Happy Easter and Happy A2A dayy from Plymouth UK. Last week of getting these updates @ 11a.m. as clock go forward on Sunday.

@frompinetopalm 4 ай бұрын

Happy Friday, Phil!! -Annie B

@alan-sk7ky 4 ай бұрын

2:45 or, weather and mooring permitting, climb up from your dinghy. Might be good though if a third body is with you to mind boat etc.

@Shady-Shane 4 ай бұрын

that cutting board hack is good, thanks to Madds.

@carlhitchon1009 4 ай бұрын

Farley Mowat's stuff is good reading. Haven't read that one though. Check out, I think it's called. "People of the Deer".

@seanflanagan6862 4 ай бұрын

Good job Stephen

@TheStinsonsteve 4 ай бұрын

Looks good, man! I worry a little about UV resistance of the cutting board material. Keep an eye on it.

@kennycressler611 4 ай бұрын

I was watching your video when you talk about stuff freezing in your freezer and all that and now you might want to check into it are you don’t have to keep eggs refrigerated if they’ve never been fridge rated the last like twice as long that gives you more space in your fridge raider

@ianb5949 4 ай бұрын

I've had eggs last 3 weeks with no reefer. That's when I ate the last one

@ps.2 4 ай бұрын

And butter. No need to refrigerate that unless you're keeping it a really long time.

@billsrq1788 4 ай бұрын

Good morning from Siesta Key Florida

@lbpyne52 4 ай бұрын

Two comments. One also read Mowat's Bay of Dispair its bases around the south coast. Second be sure the AIS can be seen and heard at the helm.

@budschermerhorn6062 4 ай бұрын

Good Morning from Sandwich, MA

@benjyamon 4 ай бұрын

Oh you might likely enjoy that "The Boat Who Wouldn't Float" book! It makes me laugh out loud! And is set in the areas you plan to cruise coming up! Hard to believe some of the tales are supposedly true!

@sircaran 4 ай бұрын

Radar dome? That scanstrut look like a "seat of ease" :D

@seanflanagan6862 4 ай бұрын

I would've thought that lock nuts would be a be a better choice up on the mast.

@ZigZagMarquis 4 ай бұрын

@ 16:09 Awwwhhh... whooooza good boy! Kiva is! 😁

@AcornToArabella 4 ай бұрын

🐕!

@donzero4944 4 ай бұрын

At 1st glance I thought the radar mast mount was a new small toilet seat for use over the side 😜

@user-ur5br3ne9h 4 ай бұрын

Those cutting boards are going to deform over time in the heat and elements, ask me how I know.

@A.Spivey 4 ай бұрын

Happy Friday

@charlespleisse1984 4 ай бұрын

FYI cutting board is not UV stable and will degrade. Good short term solution.

@morganhill9642 4 ай бұрын

Super Glue isn't water proof either.

@JoesWebPresence 4 ай бұрын

HDPE plastic (the cutting board) will be fine. The only plastic you can safely melt at home in the oven. (180c or gas #3.) I save all my old milk cartons, melt them into trays on grease proof paper, allowing them to cool down slowly so as not to warp, then I cut them into strips. I make all kinds of brackets with holes drilled exactly where I want them. I no longer use wooden stakes in the garden. These are stronger and don't rot. Cutting boards are ideal for either of these, so I think it will outlast either of the components mounted on it.

@morganhill9642 4 ай бұрын

@@JoesWebPresence I doubt a HDPE cutting board has required UV stabilisers in it to make it last very long

@morganhill9642 4 ай бұрын

A more suitable product would be "King StarBoard" which is UV stabilised

@boooshes 4 ай бұрын

You can also quickly put a couple of coats of white paint on the board to greatly increase resistance to uv, just rough it up first and chemically etch with a solvent first

@charlesdavis4396 4 ай бұрын

I use dielectric silicone on all my connectors.

@melshea2276 4 ай бұрын

SUMMER!😊

@gilray1977 4 ай бұрын

1. A wooden boat hat with the issue # that has the launchings that your in... How Cool Is That ! 2. Ahhhh Guide books. 'Dream machines' ! You dream about the routes you will do and years later you go back and dream about the climbs you did. I gave away a box full of Vegas and desert guides... But you can have my maroon red "Paul Ross' N.H guide and my yellow Meyers Valley guides 'when you pry them (and all the personal notes within) from my cold, dead fingers :)

@joedoe6444 4 ай бұрын

Akiva; "i can sit here and stare at you all day with this sad face or you can take me out for a walk. the choice is yours human".

@ianb5949 4 ай бұрын

''I just want 15 knots'' reminded me of my last sailing venture in my Alberg 30, no engine. I left that lump of iron in the yard for somebody else to scavenge. I left the Chesapeake Bay in 0-5 knots of wind, but soon encountered 35-40 knots of wind from the North. That lasted over a week. I was heading S-E, down-wind so the wind speed was ameliorated. However, the noise in the rigging was horrendous. So my mantra became just 15 knots. The music from the rigging didn't match anything I could join in with, it was just NOISE.

@cldcover 4 ай бұрын

Wonderful, wonderful content as always. Can i make one request? How are all the people who helped along the way? What is KP doing? How is Alix and his new family? What about Anne and all the others who names i can't remember.

@patmancrowley8509 4 ай бұрын

Ah, radar (RAdio Detection And Ranging). Great tool for foggy days and entering port. Great tool for navigation through straits (triangulation). Keeps you in the center of the channel. But hey, you've got GPS. Don't forget that during a war footing within the United States GPS is sent askew to keep the enemy from using it against us. It's good to have the radar and learn "dead reckoning" too.

@Phat737 4 ай бұрын

I really enjoyed the tourist and technical aspects of this video. I wonder why you couldn’t get that book Mail to you directly? What’s the advantages of ship based radar over the satellite system you also have? Thanks for showing us the products you used on your new mounting bracket. I would have liked to have seen the mast mounting effort too.

@fpnbrian 4 ай бұрын

that vsc10 should NOT be installed up the mast, it should be down low closer to the point of lateral roll (generally somewhere near deck level center line), generally best option is to locate is on the stern. Up on the mast it's going to be subject to all the motion of the rig and provide very poor data as a result.

@garryturgiss8551 4 ай бұрын

You need to take him to the dog park in Brewster. It's on 6a

@RobertFay 4 ай бұрын

*- Steve and Robin, here is a tale for you I learned from Newfie friends at Acadia University.* *- "The legend of Newfoundlander Hospitality."* *- In Newfoundland, they always keep spoons on their table for tea, etc.* *- Newfoundlanders bring visitors home and won't let them leave.* *- However, the 'joke' goes {and the truth may be}, it is time to go when the spoons are not on the table.* *- When you are there, ask them about the tale I tell you here, and see if they know why it is told.* *- Either it is true or a Newfie was pulling my leg.*