Grinding pen, proper calibrated wire, shorted capacitor, shorted mosfet, 30 minutes craft... What a fantastic repair video!!! And we have picture!!!! Proper nice wake up today😍

I love how he just kept saying "this is fine" over and over trying to convince himself it'd be easy😂😂

If I had drilled a hole in a motherboard, the laptop would never turned on 😂

Sorin, stop drilling. You won't find oil 🤣🤣

I take my hat off to Sorin, a lot of repairers would have just replaced the motherboard and landed the customer with a hefty bill to pay. It takes years of experience to reach this level of repair skills.

That's not a regular repair. That's wizardry, magic repair. Wow. One of the best videos, if not the best. Thanks Sorin.😱

You know it's gonna be bad when it's 4 minutes into a 40 minute video and you think it's gonna be an easy one 😂 great job, I would've given up on this pretty quickly

That's exactly why people want to pay for a class from you! You sir, are a savant when it comes to electronics repair. That's awesome.

Even i felt very satisfied when the picture came up :D

Honestly this guy is amazing and one of the best engineers I've ever seen. ❤

I've watched Rossmann and Northridge for years, this is the first video of yours I have seen. I was concerned when you started butchering the board and briefly horrified when you talked about not cleaning the fans but what a great job!. Liked and subbed.

Woooow What a micro surgery !!!! Really impressive Thank you Sorin for your endless passion that gets viral with all around you What a pleasure to bring something completely dead back to life 🙏

I wish we could go back to the times when everything was single layered and through hole. Chips were socketed and to fix them you just had to take them out and put them back in.

Hero Sorin. What an amazing repair. Well done sir.

This is by far the prettiest repair you've done this year. Congrats

Sorin your logic is spot on! You are a wizard! Thanks for all you do!

Many thanks. These videos are so satisfying to watch!

The Godfather of Repair 👍👌

What a spectacular repair. You must have the patience of a saint. Amazing work Sorin.

Wow, that's a rock'n'roll repair ! Congrats ! Thanks for sharing !

What a great video. You hit it out of the ballpark with this one. I learned so much.

Incredible repair!!😮👏👏👏 Well done Sorin!!!

The person never give up is one and only is Master Sorin great job😊

Never seen someone grind through a motherboard. Most exciting repair video! Great job.

very good work, Master, thank you for sharing your experiences; greetings from South America

Proper surgery this one! Thanks for another enjoyable fix Sorin.😁

Use rosing to isolate burned layers, ok, noted. Thank you Sorin! As always, learning something new in everything video you upload.

Thank you Sorin. You didn't work for nothing. I'm happy you are able to help another customer.

That was amazing, keep up the great work Sorin!!!

Felicitări pentru tot ce faceți, sunteți fenomenal!

You are a great inspiration, thank You so much GM

I Love your happy child face, when it gives you picture!! Amazong job!

Excellent job sir salute you from zambia 🇿🇲

Mad respect for you Sorin!!! I laughed so hard, there was a gaping a-hole with brown stuff coming out, but you still managed to fix it with some grit and some calibrated wire 😉. AMAZING work

"Say hello to my little friend." OMG, Sorin Sorin Sorin... I LOL during the dog walk SO HARD people must of thought me nuts.

WOW! Unbelievable! You are the one!!!! Great job!!!!

Das crazyyy!!

This was an amazing lesson on board layering and how to remedy when you have multiple layers shorted, a nice angle-grinding technique. These are the types of challenging repairs that I enjoy and learn from the most qualified, watching a pro getting it done is very inspiring and adds to my skillset knowledge. I haven't had many LT's to repair but feel confident after watching so many repair videos. Great stuff Sorin, thank you so much for this lesson !! They can't all be 10 min repairs - that would get old. More fun to have the challenge element involved. Better yet, maybe repair other boards such as control boards or a TV or Audio device, just to mix things up a bit. So much to learn ... always learning. 🤓🥱🙂

excellent video sir! love the oldschool dust blowing technique.

Hat's off for this one Sorin!! Really great!

You had me at grinding .... Holy crap what a hole!!! Surely i hope that lasts. I've never seen anything this amazing in a long time.

Wow, you really are amazing Sorin.

Crazy repairs, job well done 👍

All Respect is for you, Sorin

alcohol open the second mosfet, that is why you have short, it is dangeros to put 19V on mosfet full of alcohol, you can demage even CPU, but great job Sorin, pleasure to watch ☺

I loved the sound of the drill

Dear Sorin. After watching many of your educative videos for a few years you dont stop to surprise me. You show me a meteorite impact on a pcb and your words are (we are still ok.. We can fix this..) then starts digging in a board where i would already gave up on ever being able to fix this alien struck board. You show us every time that you will only give up when you actually found the problem. Because now you actually learned something. Iam just a hobbyist but i also always want to figure out wats the cause. Its either that , Or i somehow make magic smoke.

Great Jobs Thank's for sharing knowledge

what an amazing fixing drilling the board and it still works

Insane! and back from the dead? Excellent work.

The dirt in those fans...holy hell no wonder why the thing imploded. 37:28. Sorin wearing a proper calibrated shirt for this repair!

Thats why I love watch ur videos, because at the same time i do increase my repair skills :D

Unbelievable love for your work effort amazing

You deserve a trophy 🏆 👏, that's some top skill 👏

The board went into root canal treatment, satisfying result

13:07 drilling a hole in motherboard mine - looking for a gold nugget 😂

Sorin your are fantastic! a genius

That was proper clever. From a dog's breakfast , Sorin brings customer a Plucked Chook on a Silver Platter...bravo!

Wow! very talented engineer!

Well done Sorin Thumbs up.

Greetings from Philippines 🇵🇭 that’s one hell of a repair, that’s a fry mother board, i also have a nitro 5 with rtx3080 suddenly got shutdown, always maintained and cleaned fans ,I didn’t know what the cause of it’s sudden shutdown,i wish that you’re just near so i can bring my laptop to you,hats off , new subscriber here

Great work sir

You are the G.O.A.T in the repair business for real

WOW. Very Impressive sir! I knew I would see some crazy stuff when I subscribed one video ago and oh man... just wow haha so cool. Congrats! I learned a lot... Thank you and keep doing super cool repair like this!

Good job, congratulations ❤❤❤

burnt layers, a hole into the motherboard. Sorin...Is not that bad 😳

amazing repair .. thank you

Experience shining through 👍

Bufff!, Congrats with this one!

you are very food nice work am from Toronto Canada you know your work nice job

What a great job!

wooow very nice result, congratulations. Que reparo top 😅

That was amazing. Thank you!

For a moment I thought I was sitting in my Dentist's chair getting a tooth filled! Might ask her to use rosin as a filler next time. 👍 Fantastic effort and great job in the end. I hope your customer appreciates what you have done - resurrected his laptop.

the 'we have picture' that brings smiles to the masses :D

Amazing repair

that's sick repair 😈 well done

man u are a incredible, when I grow up I want to be just like you!

My respect master Sorin.

I also feel the stress even though I don't know what you are doing

Nice video has always :) a well calibrated wire and a well calibrated solder ball Nice :)

You look like a dentist fixing a cavity 😂. Good job Doc!!!

you are crazy !!!!! ..... great job ... well Done sorin !

This guy is like a dentist.😂This was so fun to watch.

Excellent job Congratulations

We have pictureee, that';s crazy, Sorin the Driller :)).

You are a crazy magician!

Best KZfaq Channel

You got me worried there when you said you wouldn't clean the fans!

That is absolutely incredible. Soring is a wizard! Also you could make a carpet out of that dust on those fans! Looked like a nuke went off on the back of that board wow!

You did good job!. Better than factory..

This is exactly why Sorin is the best

Thank you Master 🙏

Reminded me a little of root canal surgery. Good job.

Good job mate

This was proper hard repair and nice video the best is that we get pizza at the end👌🍕

It sounds to me as though Sorin comes from somewhere to the east of Britain where it used to be the case that you had no alternative to mending things just as it was in Britain in the 60s, 70s & 80s,, these are admirable skills in our current throw away society! PS are we not still missing a capacitor??

The grinding was insane, I was like, with that much shorting whether it will come on or not, but that's a very lucky customer

nice one mr sorin

Great work!