Display examples - which one to use?

Рет қаралды 250,135

5 жыл бұрын

$2 for 10 PCBs & $6 for stencil: jlcpcb.com
Here I show you a short example for each one of these displays. Below you have the schematic, library and an example code for each display. Thank you!
Help my projects on Patreon : / electronoobs
my Q&A page: electronoobs.com/eng_preguntas...
Canal en Español: / electronoobs en español
PRINTERS
-------------------------------------
Ender 3(155€ AMAZING): www.gearbest.com/3d-printers-...
Coupon(142€): "GENDER11"
SparkMaker SLA: www.gearbest.com/3d-printers-...
Crealitu CR10: www.gearbest.com/3d-printers-...
Coupon code: "11CR10EU" or "11CR10US"
ANET E10 (219$): www.gearbest.com/3d-printers-...
Coupon code: "Anete10us"
TEVO Tarantula (175$): www.gearbest.com/3d-printers-...
Coupon code: "Tarantulaus"
Creality CR10 MINI: www.gearbest.com/3d-printers-...
COUPON: CR10MINI
Anet A8: www.gearbest.com/3d-printers-...
Coupon code: "A8KIDA"
-----------------LINKS-------------------
-----------------16x2 LCD without i2c-----------------
16x2 LCD: www.electronoobs.com/eng_ardu...
Schematic: www.electronoobs.com/eng_ardu...
-----------------16x2 LCD i2c-----------------
I2C 16x2 LCD: www.electronoobs.com/eng_ardu...
Schematic: www.electronoobs.com/eng_ardu...
-----------------128x64 OLED i2c----------------
OLED I2C: www.electronoobs.com/eng_ardu...
Schematic: www.electronoobs.com/eng_ardu...
-----------------NOKIA 5110 SPI---------------
NOKIA 5110: www.electronoobs.com/eng_ardu...
Schematic: www.electronoobs.com/eng_ardu...
-----------------7 Segments with MAX7219 driver---------------
7 segments MAX7219: www.electronoobs.com/eng_ardu...
Schematic: www.electronoobs.com/eng_ardu...
-----------------7 Segments serial LCD---------------
7 segments LCD: www.electronoobs.com/eng_ardu...
Schematic: www.electronoobs.com/eng_ardu...
-----------------Dot LED MATRIX with MAX7219 driver--------------
Dot MATRIX MAX7219: www.electronoobs.com/eng_ardu...
Schematic: www.electronoobs.com/eng_ardu...
-----------------e-Paper display--------------
e-paper display: www.electronoobs.com/eng_ardu...
Schematic: www.electronoobs.com/eng_ardu...
-----------------ILI9341 TFT display------------
ILI9341 TFT: www.electronoobs.com/eng_ardu...
Schematic: www.electronoobs.com/eng_ardu...
-----------------SSD1289 TFT display--------------
SSD1289 TFT: www.electronoobs.com/eng_ardu...
Schematic: www.electronoobs.com/eng_ardu...
Image2LCD software: www.electronoobs.com/eng_ardu...
Like share and subscribe to motivate me. Thank you
#display #Arduini #LCD

Пікірлер: 250

@jigsound 2 жыл бұрын

What a comprehensive presentation! The I2C protocol is such a powerful and simple solution to a lot of simple tasks. 👌

@Usq7213 5 жыл бұрын

Everytime i get notifications from you it makes my day. Thank you for awesome videos as always!

@ELECTRONOOBS 5 жыл бұрын

Thanks to you for the support!

@Nicksperiments 5 жыл бұрын

Whenever tft displays stay just white, it’s usually a wiring problem so make sure everything is soldered correctly and that no wires have broken

@joshuaoduroadu5376 2 жыл бұрын

Very nice and concise overview of the varied screens available out there. Thanks so much for this.

@stonetechnology Ай бұрын

🤩stone LCD display is professional

@andreitcaci4924 3 жыл бұрын

This is such a cool and well explained video! Thank you as well for all the codes posted underneath to play with. Subscribed)

@lalchandra4590 5 жыл бұрын

Thanks Electronoobs. I really need this kind of video. This video answers many questions of Arduino beginners.

@contentex1 5 жыл бұрын

Thank you for so great video! Would you please add a video with operation temperatures which that displays can work? Thank you again!

@mfalme254 5 жыл бұрын

i really enjoy your video. THANKS FOR THE OVERVIEW. i prefer the DSD screens because needs fewer pinouts.

@Aceino 5 жыл бұрын

Very helpful, thank you! I'm new to the micro controller world and this was very useful.

@joetke 5 жыл бұрын

Thanks for the review. It's instructive. I'm interested mainly in the largest display that didn't work...

@sayantanpal7953 5 жыл бұрын

Thank you so much for the explanation.. now I can choose different displays which is most preferable for my projects

@stonetechnology Ай бұрын

🤩stone LCD display is professional

@72mgmidget 5 жыл бұрын

I would really like to see you getting the touch screen display working with your Arduino, even if it means buying a shield. I have a number of projects in mind to try to build and it would be great to eliminate the need for any other pushbuttons or keypads, just a power on/off switch. Thanks. Very informative video. You obviously put a lot of time and effort into covering such a wide variety of different displays and how to wire them, and the associated code to make them work - well, most of them, at least :D

@Kickin0u0in0the0nut 4 жыл бұрын

Just stumbled on this channel so happy!

@undamned Жыл бұрын

Nice overview!

@LemmyCaution66 5 жыл бұрын

A fantastic video/project. I just got myself a 5” MP15001 touchscreen for my Raspberry Pi 3B + and 3A +. I was looking for extra screen info and again I found it here.

@stonetechnology Ай бұрын

🤩stone LCD display is professional

@batica81 3 жыл бұрын

For 128x64 OLED i2c you are actually using only 32 lines in the example. You need to change the default value in the library file Adafruit_SSD1306.h to #define SSD1306_128_64 It will look much nicer :)

@sadunnakipoglu9471 Ай бұрын

Thank you and appreciate your effort. Greetings to you from Turkey .

@Taran72 5 жыл бұрын

Wow! Great tutorial!

@muhammadizzhakimi3355 3 жыл бұрын

nice presentation , good work

@bharatghori4422 5 жыл бұрын

very nice introducing to displays thank a lot

@Ayush-tl8se 5 жыл бұрын

Well, great video. Keep it up. It gives us good knowledge. You r doing great job. Thanks for making videos like this.

@stephanedenis5394 5 жыл бұрын

Good review, very interresting.

@SIKHGT650 5 жыл бұрын

Liked and comment first , than watched video....great video...thanks bro

@raybright5805 5 жыл бұрын

Excellent summary.... I'm now subscribing to your site

@prithwishs.1488 3 жыл бұрын

Thanks a lot for this presentation

@parameshpavin2708 5 жыл бұрын

Nice video,it is nice to see e paper displays working,my suggestion is to make more informative videos on e paper displays but overall it is good👍👌

@Moosetraks21 5 жыл бұрын

this video must have been a lot of work! great job!

@daigriffiths6476 3 ай бұрын

Yes thanks, even more would be brilliant. Great videos.

@JuraganLED 5 жыл бұрын

I like honest videos like this, you included part that it failed to do so

@Bianchi77 9 ай бұрын

Nice video, well done, thank you for sharing the knowledge with us :)

@shoppingoneclick2044 2 жыл бұрын

Nice information... My suggestion is, please make a playlist on latest LCDs, Ic2 based lcd...longer lcd, TFT Latest touch screen, HMI etc Explain difference.

@yadwindersingh9494 4 жыл бұрын

Superb video Helpful for me .......I learn something new techy today

@leehewitt9559 5 жыл бұрын

Great video many thanks for sharing

@cheri758 4 жыл бұрын

7:32 that lcd lit up for a moment

@harisuresh2507 3 жыл бұрын

I SAW!

@colasmaroc8435 5 жыл бұрын

Great work, think you very much

@dellodel9502 Жыл бұрын

Very good video Thanks

@aaa72317 Ай бұрын

That banana deserves the like, well done.

@chk1414 5 жыл бұрын

Try u8g2 or u8g library with oled displays

@Neuron43 5 жыл бұрын

Interesting stuff! I have an old Home Theater PC case from nMedia that offered an optional 16x2 display which could show all kinds of information like song titles and volume level but the screen seems to have disappeared from online stores. I downloaded the software for it from nMedia in case I would find one someday. Any idea where I could find one? Thanks

@kaspariito 5 жыл бұрын

hey. thank you. Can you please add the link for the 16x2 serial module to control the display (the one that we can use to use less wiring) Thank you for all the awesome content you create!!! :))

@MCsCreations 5 жыл бұрын

Fantastic, dude. Lots of options! 😃 I need to get into Arduino as soon as possible...

@daveyjones5702 5 жыл бұрын

never been a better time for it :)

@MCsCreations 5 жыл бұрын

@@daveyjones5702 Great! 😃 I didn't buy an Arduino kit yet because I'm buying stuff a bit expensive... Things to use in quadcopters and rc wings/airplane builds. 😃 I still need a 3d printer too... But, eventually, I get there. 😊

@dukefleed8369 3 жыл бұрын

Which is the best display that can allow adding more than one code for multiple operations?

@viniciusnoyoutube 5 жыл бұрын

Very good! Thanks!

@devdharma3050 5 жыл бұрын

Your videos make me want to learn electronics :)

@Cdswjp Жыл бұрын

thank you for this video

@kranthi143B 4 жыл бұрын

Excellent sir

@RishiKumar-zv3lc 5 жыл бұрын

Wow.......I really wanted a channel like this ❤️ And, I got you 👍 Thank you.. .. ... ... ❤️

@vivekvenkatsubramaniam437 5 жыл бұрын

How do you find out how much power these screens pull? I assume those LCD displays with backlights draw a lot of current? Am I right in assuming that the smaller the screen, the lower the current consumption?

@attalaw36 4 жыл бұрын

good lesson thank you

@sneakyplays101 3 жыл бұрын

im using color tft touchscreen for my project

@revolution5547 5 жыл бұрын

love your vids

@isoguy. 5 жыл бұрын

Awsome video and cannot wait to use some of these in my projects, would like to see a detailed use of oled display showing results of relay activity e.g. relay normally open activated, temperature of room is......., on oled, house cooling fan activated on oled, heater activated on 9led etc. Thanks for sharing

@sarigaraj 5 жыл бұрын

Good video, thank you:)

@zUltraXO 2 жыл бұрын

One thing you missed: For the I2C character LCDs, you don't need to use A4 and A5, you can just use the dedicated SDA and SCL pins on your Arduino.

@GurmanDhaliwal Жыл бұрын

It’s faster that way too, the analog pins will just emulate the sda and scl so will be slower than the dedicated ones

@zUltraXO Жыл бұрын

@@GurmanDhaliwal well testing with a multimeter shows they're they're the same pins with different markings

@krnaslife9398 5 жыл бұрын

Can you make a explain video of fingerprint door lock with circuit and wiring

@nantayalert5834 2 жыл бұрын

thank you

@MouseWanted 3 жыл бұрын

can you explain why every tutorial i watch and read use D4, D5, D6, D7? not D0, D1, D2, D3? or, do you have some documentation that I can read? your answer will be very helpful. thank you

@yashshah7137 Жыл бұрын

@Electronoobs how can you show your battery percentages in oled display i want to know the process. do help if possible. thanks in advance.

@guzman-do 5 жыл бұрын

Do detailed OLED tutorial, pls!

@johnjoyce 5 жыл бұрын

Definitely not enough good OLED tutorials out there. Great suggestion!

@elabinnovations 5 жыл бұрын

128×32(OLED 0.91)

@ranjiths7627 4 жыл бұрын

128x64 oled display only displays 1st row whatever the cursor value and shows like snow on bottom full 7 rows How to get it work properly, it was like that when i brought, i thought my codes are incorrect, then i uploaded library example program, the same problem again

@ravichandel8690 2 жыл бұрын

epaper and other i really like please make more detail video and how can i learn electronics and do this type of projects

@EmersonCapuano 4 жыл бұрын

You,ve earned another subscribe 😃👍

@maheen- 5 жыл бұрын

Thanks

@YoDay 5 жыл бұрын

Perfect video :))

@Digitalcreator9165 2 жыл бұрын

Nice video.

@jvguitargt 3 жыл бұрын

Hi! I have some devices that use the Oled 128x64, However I've noticed that some of of them are faulty (dark spaces, missing characters, etc) Do you know if this kind of display can be cleaned? or is it better to replace them?

@SPECIALVIDEO 5 жыл бұрын

awesome dude

@adrianovergara1784 4 жыл бұрын

Can you make a 2.5 - 32 volts automotive logic probe with volts display for tutorials?

@efvarela3 3 жыл бұрын

Great, oh may you please explain how to use them in parallel with another SPI module?, for example the nrf24 module. Wiring LCD is so simple but actually i am having some noise pixels, connecting the ST7920 and nrf24. Is it necessary a decoupling capacitor for LCD too?.. Your vids are awesome

@doyouknow3483 5 жыл бұрын

Very good

@ashok_ign5623 5 жыл бұрын

thanks sir

@jayakarmanoharan3947 3 жыл бұрын

Can you suggest which display is best for out door environment??

@amkp40technology 5 жыл бұрын

Nice.

@izzatsd7882 5 жыл бұрын

Hi please make a project stator winding for 3 phase/bldc motor..for your next project..

@ChrPeter 3 жыл бұрын

Thank you for this video. I am currently working on a data-logger with the NOKIA display and the SD-cardreader/clock shield. Have you ever combined these? I am having difficulties using these two libraries: a) and b) It appears to me that they are not working together. Any thoughts? (Used pins for the NOKIA display: Adafruit_PCD8544 display = Adafruit_PCD8544(7, 6, 5, 4, 3);)

@themaniac5864 5 жыл бұрын

i need to make a stopwatch so the display needs to refresh fast 7 segment or matrix better? using an arduino nano

@saliksheraz6236 4 жыл бұрын

Best tutorial

@MrTigger015 5 жыл бұрын

some TFT displays are working at 3.3v and others run at 5v

@xGOKOPx 3 жыл бұрын

Fortunately, Arduino provides you with both

@KamilHisoka 5 жыл бұрын

I would like to see more Videos with the NOKIA 5110 display.

@Vimlesh-Kahani 4 жыл бұрын

Please make a tutorial on Paper Display Technology. I am thinking to build my own Kindle version eBook reader

@EasyOne 5 жыл бұрын

nice

@mohamedesalem Жыл бұрын

So usefull

@a6dulsalam511 5 жыл бұрын

where lcd 64*128 ST7920 ??? whyyy 😢

@Wilson84KS 5 жыл бұрын

How did you get your own logo as bootscreen with the adafruit library? As soon I call a bitmap in setup routine the adafruit logo shows up :/ Very informative video, my favorite is the Nokia LCD, I just love it, it's not only the price, but also the possibilities, I can show big letters and numbers but also build a menu with small letters and numbers and also print bitmaps, my first one for Arduino I got from my Nokia 3310 where I worked a long time for as I was a teenager, I had luck because that is one of the LCD's with golden contacts on it and not that stupid rubber that never works again properly after touching it once.

@johnjoyce 5 жыл бұрын

You could of course also do a whole video on the many ways to use addressable LEDs, the tapes, the individual chips and matrix modules. Tape and chips can be arranged to fit in many patterns and enable different usage styles. Power is the big gotcha always, and logic level conversion if board or SBC is 3.3v instead of 5v

@topten7064 4 жыл бұрын

Great

@usrrsr 4 жыл бұрын

It will be nice if you add power and current consumption of led displays

@_xwtk 4 жыл бұрын

The Nextion/TJC displays are the best ones.

@Gameplayer55055 3 жыл бұрын

I have some questions about displays: Why e-paper display blinks? Can it change only updated area(kind of double buffering?) My nokia 5110 has weird crystals inside, so it looks horribly and covers some display area. Why? have I damaged it, or it is factory defect? I heard that screen libraries are shitty and grabs all memory resources. So I should write own libraries, and which is better?

@wotesi 5 жыл бұрын

Thank you for video. I have a question - I have Graphical LCD 128x64 screen. Would you please suggest me what library should I use? In my project I just need simple text print, small enough to be able to write several lines. P.S. the screen I have it has controller: ST7920 and it is of this type: HJ12864ZW. Thanks! BR, Valters

@broodland 3 жыл бұрын

Thnak u

@bichismasher 5 жыл бұрын

what about that banana display??? can you provide the library for it? it will be useful

@jaimem1918 5 жыл бұрын

Hola, necesito ayuda, tengo un LCD tipo TFT, el modelo KMR-1.8 SPI, he probado varias conexiones pero me sigue saliendo la pantalla en blanco.

@mlupdate1678 3 жыл бұрын

the library you used for OLED display can also use in any type of arduino module?

@paulgupta2454 2 жыл бұрын

What display would you recommend for people with low vision? I am building a things for people with disabilities who need larger letters to be able to read them. Not even large displays just like a 3 inch or so screen that could display "Volume up" for example

@RETROGAME-FIX 4 жыл бұрын

Hi. Is it possible to build synchronized multiple screen with one arduino controller to show live feed with a camera?

@exoticcar5482 Жыл бұрын

Wish you included dot matrix vacuum fluorescent displays

@mindaugasvaskevicius1818 5 жыл бұрын

Are you considering making a tutorial for some of the displays, but in C, C++, or assembly? I'm not quite an Arduino person.... I prefer my code to contain interrupts and as least NOPs(delays) and DO NOTHINGs as possible.