Elegoo Saturn 3 Ultra Review - WAIT! ACF is Good Now?

No video

Elegoo Saturn 3 Ultra Review - WAIT! ACF is Good Now?

Рет қаралды 93,238

Күн бұрын

Buy the Elegoo Saturn 3 Ultra here: shareasale.com...
Buy the Elegoo Saturn 3 Here: shareasale.com...
All Reviews
• Elegoo Saturn 3 Review...
• Elegoo Saturn 3 Ultra ...
• Elegoo Saturn 3 Vs Sat...
• Saturn 3 & Ultra Vs An...
Saturn 3 Playlist: • Elegoo Saturn 3
Buy the Elegoo Saturn 2 here:
Elegoo - shareasale.com...
Amazon - geni.us/Elegoo...
Element Games - elementgames.c...
Buy the Elegoo Saturn 8k here:
Elegoo - shareasale.com...
Amazon - www.amazon.co....
Tomlov Video Microscope: amzn.to/43BfdLO
Get any printer working easily with the Photonsters XP Range Finder - www.thingivers... (watch my video for full instructions • How to Print Perfect M... )
Join this channel to get access to perks:
/ @fauxhammer
Buy WARGAMER - The best Resin for Miniatures yesthats3dprin...
3D Printer Cleaning Mat: geni.us/3DPrin...
This Video is part of our series looking for the Best 3D printer for Miniatures; www.fauxhammer...
Special thanks to the following Creators who provided models
Creature Caster - www.myminifact...
Tenjin Bust - BlackForgeGames (Patreon Only) - / blackforgegames
Dredge Marines - Mezgike - mezgike.com/co...
Wolverine - Drafnir Studios - cgtrader.sjv.i...
Artis Opus FauxHammer Essentials Set: store.artis-op...
FauxHammer Patreon - / fauxhammerblog
FauxHammer Facebook Group - / painthub
FauxHammer 3D Printing Group - / 3dprintedminiatures
FauxHammer Discord - / discord
Best Airbrush For Miniatures: www.fauxhammer...
Beginner Airbrush: www.fauxhammer...
Affiliate Links to support us.
Element Games - elementgames.c...
Wayland Games - affiliates.way...
Forbidden Planet: forbiddenplane...
Amazon - www.amazon.co....
Website: www.fauxhammer...
Facebook: / fauxhammerblog
Twitter: / fauxhammerblog
Instagram: / fauxhammerblog
Pinterest: www.pinterest....
Video Editing by VidPros: app.vidpros.io...
00:00 - Intro

Пікірлер: 445

@FauxHammer 11 ай бұрын

Buy the Elegoo Saturn 3 Ultra here: shareasale.com/r.cfm?b=2351046&u=3060349&m=104244&urllink=&afftrack= Buy the Elegoo Saturn 3 Here: shareasale.com/r.cfm?b=2351044&u=3060349&m=104244&urllink=&afftrack= Get any printer working easily with the Photonsters XP Range Finder - www.thingiverse.com/thing:6023738 (watch my video for full instructions kzfaq.info/get/bejne/fdNgYN1qnJfYl40.html) Join this channel to get access to perks: kzfaq.info/love/_9Jsf3SP8aMJgn0xv5jHjAjoin Buy WARGAMER - The best Resin for Miniatures yesthats3dprinted.com/pages/wargamer?ref=FauxHammer

@catagris 7 ай бұрын

At 8:28 it looks like there is a select all and then you can delete everything. Is that not the case?

@jeffjackson4465 24 күн бұрын

My wife just bought the Elegoo Saturn 3 ultra and wash/cure stations for my birthday. We used your link. All totaled $537 USD. Really great deal.

@ericmoe63 Жыл бұрын

I just received my saturn ultra last week. It's not my first printer, but it's my first resin printer. I held off for a long time because of the cost to build volume. I did some research and had prior knowledge of resin printers, but I still took the chance on this as a preorder. Gotta say I'm impressed for many reasons. First-time setup like bed leveling, build volume, build quality, and I can't really complain about the slicer either. I went into this purchase mainly to print drone replacement parts, and now I'm searching through my files for models that took DAYS on my fdm printer because the saturn ultra produces highly detailed prints faster than the estimated build time. If you're getting one, just run every benchmark print you can find, and I don't think you'll be disappointed with the results. *Promise I'm NOT a bot or paid. I only wrote this because I saw another video about this printer and had buyers remorse because of the AXF film and the general sentiment of "Why does this printer even exist?"

@sk8erdude2467 Жыл бұрын

As always great video! I've had my Saturn 3 Ultra for almost a month now and love it. It's my first resin printer coming from the olden days of a heavily upgraded Anet A8 FDM printer and I'm absolutely sold on resin printing. Sadly I scratched the ACF that comes with the printer early on but Elegoo still doesn't sell replacements yet. I'm using Saturn 3 PFA film until ACF is actually available but zero issues without changing the settings.

@DEmitch01 Жыл бұрын

I bought the ultra as first 3D printer ever and i am absolutely amazed by the speed and detail this printer can print really loving this printer and its so easy to use.

@HakkeJoe Жыл бұрын

I just ordered my Saturn 3 Ultra.. it will be my first printer, too.. i´m excited :D

@iwannaratrod Жыл бұрын

I have one that should be arriving any day now. I even ordered a standard Saturn 3 VAT/FEP based on your previous experiments. But it looks like I'll be mostly using the ACF and have the FEP as a backup or when someone wants every bit of detail possible. Thanks for the update and I guess validating my purchase. :)

@FauxHammer Жыл бұрын

Would love to see your results in both as I’m still to confirm if it’s just me. And yeah, you picked a good one

@topherc100 Жыл бұрын

You can do select all on the file browser to delete all@@FauxHammer seen at 8:27 / 8:28

@Travis.O Жыл бұрын

This is the review I’ve been waiting for. Thanks

@FauxHammer Жыл бұрын

Thanks for watching

@patrickl9930 11 ай бұрын

I switched over my Mega 8k and Mighty 8k printers last month and have had nothing but great prints with ACF. Being able to cut my lift height by 70% _and_ increase lift speed 2x has been a gmae changer. No weird patterns so far!

@FauxHammer 11 ай бұрын

Glad you had a good experience. My Mega 8k comes next month and I;m about to change my FEP for ACF today on the Phrozen Mighty 8k (now 12k)

@kdonv 9 ай бұрын

Why do you think that is? I'm buying a new printer and the whole ACF bit has me nervous.

@johnhinkey5336 Жыл бұрын

A more diffuse light (refractive) source will play better with the granular ACF surface whereas a more collimated light source (Fresnel lens) will be more sensitive to the granular nature of the ACF film. Your results make sense.

@FauxHammer Жыл бұрын

Good to know. Thanks for backing this up, because it’s blown my tiny mind

@HumbleMonkey Жыл бұрын

Is it known that the backlight in this model is less collimated, or more diffuse? I wouldn't equate "refractive" with either "less collimated" or "more diffuse". Just the opposite, in fact. EDIT: clarification: a fresnel lens is a refractive optical element, so really we're comparing a "conventional" (refractive) lens with a fresnel (refractive) lens, FWTW.

@FauxHammer Жыл бұрын

@@HumbleMonkey agreed, but I knew what was meant

@ajc4477 Жыл бұрын

I love your videos but I think you should save yourself a couple of quid by dropping the stock footage of randos shrugging/nodding, etc. It's not needed and it's hackneyed at this point.

@_--JohnVK--_ 11 ай бұрын

@@ajc4477 Sorry for the O/T, but that is EXACTLY what I was thinking! It is very distracting and adds absolutely nothing to the video. I would really love to see those go. So, in fact, I would really love to NOT see them at all ;-)

@JohnVanderbeck 9 ай бұрын

Spoiler alert - the filters don't do anything really. Not even the big huge stand alone one. I bought it as a combo when I got my Saturn 3 Ultra and I have multiple HCHO and TVOC sensors in the workshop. These things on or off didn't do squat. The ONLY way to handle this properly really is venting the air outside. Period full stop.

@nazaxprime 9 ай бұрын

Basically, yes. There's plenty of evidence for that. Anyone truly serious about this would perform an industrial hygiene survey, install exhaust hoods, down draft tables, would use resporators in conjunction with a respirometry lab and annual testing, and the usual gamut of PPE. ¯⁠\⁠_⁠(⁠ツ⁠)⁠_⁠/⁠¯

@rallyfeind 7 ай бұрын

People also don't realize how many sources for VOC's are common to things like mineral spirits and almost every solvent we use for thinners. Almost everything we use to clean from a supermarket is still not safe to breathe fumes from either. The idea the average person is actually understanding what is on any MSDS or what respiratory PPE even means in practice beyond a mask and fans or venting is kinda absurd to expect. People don't use respirators when using mineral spirits commonly despite all the hazards and warning all over the art world.

@ManAtPlay 3 ай бұрын

Is hepa filter works for voc?

@Shrouded_reaper Ай бұрын

Yep, the cleaning solvents are much, much worse for you than the resin.

@Soldierboy441 11 ай бұрын

I’m super excited, these just went up on Amazon, Elegoo doesn’t ship to my region but they do. Looking forward to seeing the upgrade to my Saturn S

@l.f3878 7 ай бұрын

Was looking at the Saturn two but now think spending a little more and grabbing this one! Thanks for reviewing super helpful ! Love your videos!

@FauxHammer 7 ай бұрын

Glad I could help!

@DisgruntledPigumon Жыл бұрын

“Damn you” (not really). I had just accepted that the differences aren’t worth the extra price, with my only consideration being the change in light source… and now you’ve basically said it makes all the difference. 😮 I’ll wait until your next vid where you swap the two vats to basically confirm that. Also, I was shocked by the print speeds. To me that would be well worth it. To be able to start a print in the morning, and do all the post on the same day is honestly a game changer for me. So, thanks for going crazy. 😀

@guillaumevanoost811 Жыл бұрын

Same here 😅

@FauxHammer Жыл бұрын

Sorry, I only know when I know. i did not expect this result.

@gunrunner35 7 ай бұрын

Per your video request, I decided to buy this printer as my very 1st, 3d printer of my own. Years ago, I was doing some designing of models for a friend who got his first 3d fdm printer back around 2015ish. My goal is to print larger sized statue-like figures for my own custom painting. I really liked the details and all the information you provided in this video. It was a real struggle between this one and the Uniformation GK2, but due to the physical space requirements where the printer has to go, I don't have enough space to accommodate the pivoting up and back cover. If the Uni GK2 had a lift off cover, I would have bought that one in a heartbeat as my first. I really hope the Elegoo Saturn 3 Ultra lives up to all the reviews. Only time will tell, and I'm ready to see what I can do with her when she arrives. Thanks for all the in-depth reviews you do, as they were the best in providing what I needed to know the most about when purchasing a printer. Keep up the great work.

@brutallica2944 7 ай бұрын

Got her yet? And how are you getting on?

@gunrunner35 7 ай бұрын

@@brutallica2944 I literally just received her in the mail yesterday. Got her set up and made sure the plate was level and ready to print. Unfortunately, I need to do a couple more organization redoing tasks in my tiny mini-workshop where I put it to get it ready to print. I still need to get some good gloves, a respirator, a cookie sheet or rubber pad, you know bits and pieces that are needed to really enable printing. It's going to be a multi-stage process before I can even get my first print done.

@ashouaxiong1404 5 ай бұрын

Hows it been?

@HayashiKaiji 11 ай бұрын

This is actually pretty fascinating and exciting. ACF that does not have that drawback makes this my new printer of choice now!

@Saintgoten 9 ай бұрын

New to the hobby, just bought one of these thanks to your reviews. Cheers mate

@FauxHammer 9 ай бұрын

Welcome aboard!

@ianwood9780 Жыл бұрын

iirc, refraction is when the input light (to a transparent glass) is below the critical angle (snell's law), the light travels parallel to the glass surface, and refracts up at the critical angle, so every bit of light is parallel. This is clever. Or i am hopelessly wrong.

@julianthomas2742 7 ай бұрын

Lo Howler! Great video, but Morningstar on the computer screen in the back ground made me subscribe instantly. Hail Reaper and Happy printing!

@FauxHammer 7 ай бұрын

Hail Libertas!

@christophermarin3231 6 ай бұрын

I just bought an Elegoo Saturn 3 Ultra, as my first resin printer. It arrived today and now I am currently waiting for Elegoo's customer support to reach back out to me. As my ACF file came damaged in the center. Hopefully they respond soon, as you can imagine, I was excited to start printing.

@jmssun 7 ай бұрын

4:33 I always use a short L-shaped USB extender, so it is flexible to prevent drive from breakage due to accidental bumping, and to prevent connector from wearing off due to frequent usage

@neiswestnij 7 ай бұрын

Ordered my Saturn 3 Ultra based on your reviews. I planned to order PFA foils too to start with, but now I’ll try the preinstalled ACF for now

@marcoc.1646 9 ай бұрын

Regarding leveling, I'm happy that they changed the fixing system. I have an Elegoo Saturn 4K and just yesterday I started to notice that by printing miniature bases directly on the plate, I lose millimeters in z and the model becomes wider. I think it's due to the screw that blocks the Z of the plate which isn't able to tighten well.

@Optix334 Жыл бұрын

Pro Tip: Store your sliced files locally, and when you send to the printer use the same name so it overwrites and never fills up. I can't think of a reason to keep files not actively printing on the printer itself rather than my PC since its all 100% wireless now. You can also skip Z=0 when leveling. The printer already goes to 0 when you home it. You're just setting it to the same setting over again.

@FauxHammer Жыл бұрын

Oh that’s genius!

@adamjung Жыл бұрын

I was wondering how the wargamer resin would perform at high speed. Thanks for making me more jealous of the UK (longtime tv Anglophile). Need to find time to set up my ultra!

@compsultinc6417 11 ай бұрын

This video finally convinced me to buy the Saturn 3 Ultra after hesitating for weeks comparing it with the Anycubic M5S. Thanks Ross!

@FauxHammer 11 ай бұрын

One is happy to be of service

@yanis_s500 8 ай бұрын

Great video, just purchased this 3d printer! :) One thing I dont understand, when watching 3d printer reviews ( also FDM), is - Why people are so oldschool and they keep using USB sticks? I have Bambulab X1C and I never ever used USB stick, since sending files is so much easier and quicker. The same probably goes with this Elegoo 3 Ultra.

@miguellopez3392 6 ай бұрын

The liniar projected light can give light uniformity of over 90%, other methods get between 80-85%, dlp gets over 95%.

@ridwan3533 3 ай бұрын

Thank you after seeing you review i decided to buy saturn 3 ultra after several consideration and meet some colleagues of mine who also own this printer i buy this machine love your others vidio explaining about printing resolution it gives me some new insight Moving From machine with 4k 7.5 inch with xy 40 micron to 12k 10 inch with xy 19x24 micron is massive gap for me especially for post production

@bacawaka2813 Жыл бұрын

I wish it was heated too. I moved my 3D printing to my garage because fumes are starting to become unbearable and I dont want intermittent failures during the winter.

@the_kroete4357 Жыл бұрын

😮 that leaves me surprised, i am excited for your future experiments for this.

@FauxHammer Жыл бұрын

Thanks kindly

@watsonstudios Жыл бұрын

Used ACF for awhile but switched back to nFEP. ACF creates vertical lines in the print. The frosty surface scatters the light and creates light and dark voxels, almost like adding noise to the light coming through the LCD. I'll take quality over speed any day.

@FauxHammer Жыл бұрын

Seen that many times myself. This did it do it

@antongunther3977 Жыл бұрын

Great video as always! I'm very interested in the acf vs nfep video. I've been tempted to try acf, but your other videos have made me put a breaks on.

@FauxHammer Жыл бұрын

i know, sorry this one flipped it, but i can only show what I see.

@cuzzman01 2 ай бұрын

@@FauxHammer I still get vertical lines on my S3 Ultra. I print a lot of flat surfaced geometry and lines are very visible.

@tiagojohannes5920 Жыл бұрын

Hopefully with this video I can convince my parents to buy the Saturn 3 Ultra. I’ve done a huge amount of research on Resin printers now (like 70 hours+ even made a presentations. . .) and I think this might be the video to do it. Only unfortunate thing is that it would have been for my 19th birthday but if they do get it, it will arrive a month from now which is past my 19th. :l Anyways keep up the great reviews!

@pablofiasco2 Жыл бұрын

as i said in the chat, thanks for another good review, its good to have a pricerange to set a goal for saving up to!

@FauxHammer Жыл бұрын

Agreed. Decide what is right fir you then find a way to make that work. Much better than just settling fir something you’ll be unhappy with even before purchase

@ianwood9780 Жыл бұрын

fantastic. i was going to ask you to somehow keep these reviews up to date - 'cos firmware upgrades can make a difference.

@PewpewFiah Жыл бұрын

Bought a Saturn 3 Ultra through your link a couple weeks ago, so DEFINITELY super surprised to see this. I even bought some PFA Film to go along with it thinking I'd need it, very surprised to see I may not.

@FauxHammer Жыл бұрын

I’d love to hear what your results are

@TheIcemanModdeler 11 ай бұрын

Awesome review, mine should arrive this month.

@kaotictube 9 ай бұрын

Great review, but please PLEASE, stop using the stock clips for filler, it's better you just let your footage run a bit longer.

@FauxHammer 9 ай бұрын

I’ve tried. It doesn’t look right. Sorry if you don’t like it but until I can get a setup where I can do my own talking head segments. I’m sticking with stock

@DragonSkullStudios Жыл бұрын

I almost waited to get this printer. I ended up going with the Saturn 2 8k. It's works for me. I'll watch your newb video to learn how to tweek it.

@FauxHammer Жыл бұрын

That’s still a solid printer and as I said in this, I wouldn’t rush to upgrade

@omara2823 Жыл бұрын

Great review, I think I will be upgrading from my Photon S! Anychance your wargamer resin will be available in Australia?

@FauxHammer 11 ай бұрын

Yeah, this would be a crazy upgrade. We are looking to ship worldwide, but unfortunately, Australia is a difficult country to get product into at a decent price.

@Iskelderon Жыл бұрын

Good to know! I've had my eyes on this one. My Photon mono has served me well for quite some time, but it's time to move on to something larger with a better pixel size and sharpness.

@nazaxprime 9 ай бұрын

Always nice to see a win. 👍👍

@FauxHammer 9 ай бұрын

tahnks

@alexchester1617 5 ай бұрын

Bought this printer with your link, Great video! cant wait to get it and hope you get your kick back from the affiliate link!

@Rhyds86 Жыл бұрын

I was going to hold off on getting a printer until towards the end of the year but I'm hearing good things about this Ultra. Might have to reconsider. Thanks :D

@FauxHammer Жыл бұрын

Sales will be on towards the end of the year, but I worry they will sell out fast!

@Madd_Dadd Жыл бұрын

Damn it! I was so set on getting a Anycubic 3D printer, based on your reviews. But now? Hmmm. Any chance testing this printer with water washable resin? I love your channel, it’s my go to for printer reviews, keep up the good work ❤

@patrickstack2741 Жыл бұрын

I have the Saturn 3 ultra for 4 weeks now and Im on my third bottle of Anycubic water washable 8k resin - about € 30 , Its my first 3d printer and the quality and ease of use / reliability is excellent. would totally recommend.

@Madd_Dadd Жыл бұрын

@@patrickstack2741 thanks, that helps alot

@HavasiP Жыл бұрын

Makes me very happy that I ordered this printer now that I've seen this video. Could it be the resin you're using? Are you getting those lines using that resin on other ACF printers? Have you tried a different resin in the Saturn 3 Ultra with different results? Just imagine if its actually your resin that somehow can take full advantage of ACF.

@FauxHammer Жыл бұрын

Yep tried this resin in the Mars 4 Ultra too. Same typical ACF issue

@petercallison5765 Жыл бұрын

@@FauxHammer So its the light source then?

@FauxHammer Жыл бұрын

@@petercallison5765 doesn’t seem so. Same result on Saturn 3 basic with ACF. So this must just be a different ACF

@sonic4life 6 ай бұрын

My first print had a significant amount of layer lines. Might have been my print angle, but the distortions were more than I expected

@robinonrust8756 6 ай бұрын

Love you reviews and your totally right in the K marketing rubbish. Nicely explained about all that is important is the pixel sice. I'm not into miniatures but in to flat surface mecanical parts printing. Ordered this one now because of the light source and the steady Z-arm. Cheers.

@Alex-xh4jn 7 ай бұрын

Hey there, as always love your videos - they never fail to be super informative and helpful! I was wondering what you thought about the mini 8ks vs this printer if the number one goal is to maximize detail on 28mm printed minis. Would there be any discernable difference between this and the 8ks to justify losing out on all the benefits you outline in the video?

@rllsryc 9 ай бұрын

Hey I just found a delete all button, You mentioned the lack of a button to clear all the files in the internal memory. Its there just do a long press on one of the files and then you have the option to select all and delete all.

@FauxHammer 9 ай бұрын

thanks, that's super helpful

@DMHightower 5 ай бұрын

Great video! You sold me!!😊

@sixthsacrifice4458 Жыл бұрын

I understand the complaint about power button and other stuff placement... But if your desk space is tight, there's a whole other side you can put your wash and cure station on.

@RocktCityTim 8 ай бұрын

Ports location vs. Wash-n-cure vs. deskspace - put the wash-n-cure on the left side 😅 But I do agree that the ports should be on the front and power should be on the back.

@KarnikDew 11 ай бұрын

You know Ross means business when he has a 3D model of Chibs (Sons of Anarchy) in the first minute of the video! Here's to FauxHammer and to sons of anarchy, an amazing YT channel and one of the best series I've ever watched ✨

@FauxHammer 11 ай бұрын

I still have all the other lads to print at some point.

@prymsonify 11 ай бұрын

I was chosing between Saturn 3 and Anycubic M5. I ordered Saturn 3 (maybe because it was cheaper), but the same day I relaized that I need Ultra, or I will not be fully satisfied. I asked Elegoo support to change my order. I don't regret that. For me it was Linux system that changed my opinion. I beleived it will have much more hardware capacity. After all I think extra 100 USD is nothing compared to better OS, touch screen, light source, Z axis, WIFI etc. It's my first resin 3d printer, I could not beleive in the quality it deleivers. I managed to crack LCD screen already, in my first 2 weeks of using it, but still... wouldn't change to Anycubic. Thanks Elegoo!

@FauxHammer 11 ай бұрын

Good choice. Sorry about your screen woes though

@prymsonify 11 ай бұрын

@@FauxHammer by the way. Elegoo is sending me LCD for free. I was shocked that they took warranty for crashed screen. Best customer service ever

@Prickles2001 11 ай бұрын

How did you crack it?

@prymsonify 11 ай бұрын

I was changing resin so I cleaned everything. I was printing 8cm circural shape. During this print ACF was slapping loudly for the first time ever. And in about 75% shape released and slapped back into LCD and broke it leaving big circular crack on the screen. Temperature changed and I didn't calibrate I think I was overcuring. ACF was already scratched so maybe those tiny scratches made it more sticky. I'm not sure

@DFDragoon 7 ай бұрын

Thank you for the video and consistent content. Much appreciated. Out of curiosity, have you tried or looked at thermal vat bands / vat warmers for resin? I'm debating between the Saturn 3 Ultra with one added on or the GKTwo at the moment for what will be my next printer. I've seen one video looking at it, and while it seems promising, I'm always curious what multiple reports say. No worries if not, just curious. Thank you again for your time and content. Have a good one.

@gregorysiebers3721 Жыл бұрын

The wifi is a game changer... The filter I dk can still smell it even with two so verdict is out Touchscreen is nice but with the wifi is all but unnecessary Having issues yet with larger printer but think that's more human error

@meatlifter 6 ай бұрын

I just bought this bad dad last week. Calibration has been interesting, but this is my first printer.

@JustGee3D Жыл бұрын

I ordered my Saturn 3 Ultra last month and its finally going to get here Friday! Can't wait to make some great prints with it! Great video as always!

@rebekkamejlby5379 Жыл бұрын

ohhh darn it ! I thought I had nailed down to what printer I would buy: The Anycubic M5s with a M5 vat, like your previous video, but this Ultra looks amazing too!

@FauxHammer Жыл бұрын

This one, easily this one!

@Rhino_Aus Жыл бұрын

I ordered the Saturn 3 Ultra as my first resin printer, and after watching your Mars video, added on a spare vat with FEP. Guess that wasn't necessary! I'm now super curious to compare them 1:1 and see which performs better!

@FauxHammer Жыл бұрын

I’d love to hear your impressions too

@nerdytom6881 11 ай бұрын

Just a thought, I think it best that a button you use once, or otherwise rarely, like Set Z=0 is on a submenu where you can't accidentally click it in general use. I for one would NOT want it on the common command menu screen.

@FauxHammer 11 ай бұрын

Fair enough. I have to deal with the comments from all the people who can’t get prints working and I never get this issue in Anycubic printers. When you know, you know. Many people don’t know

@krisd9506 11 ай бұрын

Great video! Just ordered one! What wash/cure station do you recommend for it? From your video on the Phrozen Wash & Cure kit, it looks like that one might be a good fit with this printer.

@zior92 11 ай бұрын

Would love to see a video with you testing the Vocs and see if these carbon filters help at all.

@FauxHammer 11 ай бұрын

Working on it, they don’t help at all

@zior92 11 ай бұрын

@@FauxHammer Haha okey, that doesnt sound good :D

@jerricacw8876 Жыл бұрын

you can actually clear the files from the printer and usb stick from the printer with a "format files" option in the settings menus. I've used it a couple times already.

@FauxHammer Жыл бұрын

Oh I need to check this. Would still be nicer on the front menu. But thanks

@grahamfrench340 9 ай бұрын

I've just ordered one of these but I would have been interested more in how it handles more geometric shapes with hard edges than figures which I don't need it for. My previous Mars 2 Pro used to misprint the lower edges of items or keep putting steps in long vertical positioned items so I've got my fingers crossed this won't do the same. I prefer the power switch being on the side as I got fed up reaching around and fumbling for the switch on my bench at the back particularly as I like to have a bit of space in front of the printer as a working area. With my experience of CNC machines I also went for this as I believe the metal chassis will be sturdier as a mount for the ball screw and slides, more rigidity should result in a more accurate model. I'm hoping the grey lid is transparent enough to see in because it's looking a bit dark and would have preferred a red lid.

@petercallison5765 Жыл бұрын

Put the Elegoo ACF on the Anycubic M5s, you know you want to.

@Michael-rv5ib 8 ай бұрын

*Me thinking of an innuendo then immediately getting called out by it*

@BlackjackBat 11 ай бұрын

Similar results on my 3 ultra here, was dumbfounded by your review of the M5s and Mars 4 ultra because I am getting crisp prints on mine.

@FauxHammer 11 ай бұрын

Do you have the M5s and Mars 4? Would love to compare notes and get a wider range of results to compare

@thejdi Жыл бұрын

Sadly the Resin/Company won't ship to outside of the UK. Any idea if they are planning to setup a storefront/distributor in the EU? Would love to buy but not with the shipping expenses and import/tax fees.

@FauxHammer Жыл бұрын

We are trying to do it.

@TheIcemanModdeler 11 ай бұрын

There may be also another reason why this prints better with ACF, the screen protector may be thinner than in other printers. Thicker screen protector will make it blurrier.

@FauxHammer 11 ай бұрын

makes no difference when i tested this on the M5

@TheIcemanModdeler 11 ай бұрын

@@FauxHammer Are u referring to the plastic screen protector? Saw in a video on another printer theres a glass screen protector over the screen and if it’s too thick it can cause blurriness.

@mitchellhastings1736 Жыл бұрын

Really want to try Wargamer Resin... is there a way to get it in US?

@chublez Жыл бұрын

Oh man. I just need to buy one already. I'd really like a nice breakdown comparison video of all the resin's though. That would be supper handy. What goo is good for what? I know you are mostly a miniatures guy but what if i want to print say an RC scaler body or bits of Gridfinity to organize my toolbox is any resin better or even goot at that or should I be leaning on a fdm printer for that sorta thing.

@FauxHammer Жыл бұрын

Yeah I’ll be doing a comparison soon with Sunlu Resins

@chublez Жыл бұрын

Subbed and waiting. Looking forward to it.@@FauxHammer

@Starfury0042 Жыл бұрын

I've been looking at adding a Saturn printer since I currently have a Mars 3. My Mars is great and just works - but (you knew this was coming) - the build plate is kind of small when I'm printing larger miniatures. One dragon took me 5 print jobs to do. My dilemma is which Saturn to get? The new one is a bit more than I want to spend and I'm not super clear on how much real difference there is between a Saturn 8k and a Saturn 2 8k for print quality and overall build/reliability. I've watched and read reviews - and can't find all that much difference other than age/price and maybe build height.

@FauxHammer Жыл бұрын

Check out my Saturn 2 bmvs Saturn 8k video. Can you see a difference? Both are still great lrinters but the difference between those 2 is minimal. Between the Saturn 2 and this is even less. It’s there. But you need to really squint and stare for ages to spot the differences

@Desmo904 Жыл бұрын

Ooooh, you were on 69 likes and I struggled to click on 'like' to change that (but I did) lol! Nice review of the new printer though. I really like the plug in filter on my Saturn 8k. I can have the printer run in the same room and I barely notice the smell at all. I'd still run a flex plate on any printer I get. The rare build failures (not many at all) are worth it for the simplicity of removing models from the build plate easily.

@FauxHammer Жыл бұрын

Thanks fir upping me, it would ah e changed at some point but being stuck at 69 is not so bad

@timothyosullivan6079 Жыл бұрын

i'm getting success on the S2 8k at 300 speeds on non ACF. Interesting vid and tests.

@johnnypowell87 Жыл бұрын

Can't wait to get mine!! I have the saturn 2 8k now but this one is going to be a game charger with the speed

@FauxHammer Жыл бұрын

It’s so good. I love it

@dreadnort1 11 ай бұрын

I have mine on order to replace my saturn, looking forward to the larger build volume,

@FauxHammer 11 ай бұрын

oh it's gonna be a night and day difference for you.

@xXKisskerXx Жыл бұрын

another video talked about the actual "pollution" level of the resin printer - and this may be a case by case scenario. In his example, adding a carbon filter (outside the printer) did not help - at all - for hours, even after the printer was done printing and resin put away. This printer might help that as the air is first forced through the filter - before it can 'leak outside' - provided you use the lid properly. This might reduce the pollution in the air - but it might not be enough, and well-ventilated rooms are still recommended. I really dislike the side-mounted power/wifi/USB. I mean.. I bet if you opened this printer up you could rotate literally the entire mainboard, maybe extend some wires, and have it all come out the back with no issues. (except the frame now being made of metal instead of plastic, making it more difficult) and you could then literally print any mounts or frame or plugs to use for this project. (although with the different light system, maybe this would be more difficult than previously thought, if the inside is more close to the artistic showing of the light/lense/mirror) Also would it kill companies to include silicone plugs for sockets not in use? I mean a little slip over for the wifi-antennae and a USB plug to prevent resin and dust getting in - would be great, cost less than $1 but gives a even more professional grade feel. Thank you for your review and input on these printers. I can only hope going forward, there is less focus on "K's" (8k , 12K) and more on things like stability, speed, vat size, auto-refilling, heated resin vats, and the like - the future for resin, is still bright and full of ideas that haven't come to be yet!

@FauxHammer Жыл бұрын

Thanks very much. I hear you and totally agree

@timothyrusso4944 5 ай бұрын

Elegoo should have called it a reflective light source rather than refractive. This type of printer uses a concave mirror meaning there is theoretically infinite light uniformity making cob reflectors the GOAT light source as even a Fresnel lens has the "god ray" blooming that VR users complain of. Only thing is it inherently makes the whole printer bigger to accommodate the mirror. So you likely won't see this tech in a small form factor printer. You could, but it would obviously go against the design goal.

@johnpereira6348 Жыл бұрын

Ive been printing with my ultra since middle of july, and i never had any of the “cross hatching” problems you or jessie saw.

@FauxHammer Жыл бұрын

i haven't seen any on this. Which Ultra do you mean?this or the Mars?

@the_arcanum Жыл бұрын

Hey Ross, thanks for posting your results and your sharing your uncertainty. Could the screen protector thickness + added thickness of ACF vs NFEP be accountable for a better light diffusion, reducing the surface effect of the ACF while softening a bit the print ? I expected the M5S and Saturn 3 Ultra to have different results if only because of the autoleveling floating screen of the M5S (that adds some distance between screen and ACF) that doesn't play in its favor. But I'm puzzled you find such disparities between models of the same brand and segment (Mars Ultra vs Saturn Ultra).

@FauxHammer Жыл бұрын

Not based on all the tests I did on the M5 series. Screen protector had no discernible effect

@scottybruce4302 11 ай бұрын

I do like your videos and i think you are doing an amazing job, so keep it up! How does this compare to the GKTwo? is the £715 pricetag worth it over the £450 for the Saturn 3 Ultra?

@FauxHammer 11 ай бұрын

Come winter. Yep

@TerranFederation93 3 ай бұрын

Just looking at this review to decide whether to get this vs the standard Saturn 3 as my first printer , have you had to replace the tray since the review to see if it was just a one off lucky draw or if they have genuinely got a good product?

@FauxHammer 3 ай бұрын

No bit enough people have comment to pretty much conform I just got lucky. Personally I;d dicth the ACF just for the sake of consistency. This is still the better printer IMO. Even Elegoo have ditched ACF in their new generation.

@TerranFederation93 3 ай бұрын

@@FauxHammer Fair, thanks for confirming. I'll look into the PFA tray replacement should I go for the Ultra.

@guidooverath474 8 ай бұрын

Danuta the washer on the left and the printer on the right, then the usb is perfectly accessible…😊

@gandalf3606 10 ай бұрын

I just ordered mine based 100% on your channels and reviews. Im ordering a spare vat and would like to get Nfep for it but unsure on which to get. Any recommendations? Thanks for all your hard work!

@magikarp2063 11 ай бұрын

I just got my mars 4 ultra with ACF and my results are basically the same as yours on the saturn 3 ultra. There is a kind of super small texture but no cross hatch lines or anything like that.

@FauxHammer 11 ай бұрын

Nice!!!! This stuff is so weird!

@WiNNiep00h 9 ай бұрын

i didn't want to buy such big printer (i just print small figures), but after your review i decided for the Saturn 3 Ultra instead of the Mars 4 Ultra. i got it insanly cheap here in germany. 376€ instead of 499€

@vlfpl 8 ай бұрын

Can you point me to the shop with these insane prices? Was this some promo?

@Colorcrayons Жыл бұрын

Impressive. I look forward to the follow up video on this. I am very interested in the Mars 4 Ultra, but for 5 Benjamins, the extra utility this provides would be worth it for what I expect to use it for. I am not in a current position to get into 3d printing, but I have reached the point where I am no longer willing to buy most products by GW and their ilk. So I need to supplement my collection by going to the very niche boutique route. I figured this time next year I will be ready for it, and stuff like this will have had time by specialists such as yourself to exhaustively shift them through their paces. And who knows, maybe save a few more bucks by this time next year. Thanks for the review work. I look forward to using your wargamer resin in the future, and I hope there will be a more localized distributor to the U.S. by that point, as more and more, importing anything prices me out of even bothering.

@FauxHammer Жыл бұрын

Thanks kindly. And we should have it out to the US ASAP

@MikeHammer1 10 ай бұрын

Placing the USB port on the front makes it more susceptible to being broken. I prefer my Anycubic on the right side over my Halot Mage on the front for this reason. I doubt whether the difference between a ball screw and lead screw will have any impact on print quality, especially since the screws are preloaded by gravity.

@FauxHammer 10 ай бұрын

it's swings and roundabouts I guess. I'm just showing where it is, and my preference. if that's not for you, cool.

@Buttmaster11 11 ай бұрын

Ordered the Saturn 3 Ultra and looking forward to your Wargamer resin coming back in stock I’ve got a couple water washable elegoo resins on the way to try them out too interested to test the strength between yours and Elegoos’

@FauxHammer 11 ай бұрын

Not tried theirs, we should have ours back in stock mid October

@1topgumpilot867 7 ай бұрын

Hey Bud, I have received my Ultra, I got around to un-boxing it today, seems I have a PFA not an ACF. I assume the difference is the PFA is transparent not frosty as such like in your video, i can see the words on the levelling card like through a window? I will be very miffed if I have a late Friday special!

@JohnVanderbeck 9 ай бұрын

No idea how hard a "9H Screen protector" is but I destroyed my Saturn 3 Ultra in the first week of ownership when the build plate slipped out of my hand and went right through the LCD screen and filled the inside of the printer with resin.

@RadishTap 10 ай бұрын

Thanks for your content! What would you recommend Elegoo Saturn 3 Ultra or Anycubic Photon D2 as a first 3d printer? The Price is the same.

@FauxHammer 10 ай бұрын

That really depends what you want. Small build area with very sharp but slightly pixelated prints. More was of use and longer lifespan before replacement parts are needed Or a larger build area, still with quite sharp prints, less pixelated but a tad more bloated, a tad - most people won’t notice. Like 99% of people. My pick would be a Saturn 3 ultra having had both. I print miniatures…

@dovmerrill804 Жыл бұрын

First time commenting on your channel. 1) With kids, how do you find time to make some of the most actually useful videos on resin printing and reviewing resin printers? 2) Maybe this is a dumb point, but wouldn’t we-all benefit if we ( the resin printer buying community) had a “standardized 3D model”, say with a standard set of flat and curved surfaces, with a standard set of varying resolution details, that could be printed with a standard set or sets of print parameters ( including resin print temperatures), and tested using a set of community-chosen standard set of resins, so that those who wanted to participate could crowd-source test these new printers and submit “controlled” data on problems like the elusive “ACF” problem? This might help us isolate the problem source(s) and feedback this data to the manufacturer community ( be that machine makers, film makers, or resin manufacturers). Please advise, thanks!

@r1ck5m1th 6 ай бұрын

Mine's just arrived! Thanks, Ross 😁 am I smoking crack or can you print multiple different exposure tests at once on the same plate with different exposure times? Swear I've seen you say this before but can't find where 🤣

@FauxHammer 6 ай бұрын

You can on Anycubic printers, not these ones unfortunately, one at a time

@r1ck5m1th 6 ай бұрын

2s seems to work reasonably well with a lift speed of 60>600. First print posted after the burn in layers and we have plate adhesion. Let's hope we have some lion's tower minis in the morning

@Cordeneaux87 Жыл бұрын

I don't care about speed. Knowing the ACF is not an auto-replace in terms of quality is huge. Making printers easier to work with, more dynamic/flexible in their application, while maintaining a high quality, is definitely the direction I want to see

@FauxHammer Жыл бұрын

Me too. So many other reviewers said this was Meh. But the innovation here is massive

@Cordeneaux87 11 ай бұрын

The overall idea of reducing print fails from release film issues cannot be understated. ACF reduces film adhesion, hence allows the speed. But I think the more important issue will be the overcoming of bed-adhesion issues. (sorry, I don't check youtube notifications).

@ItsDrMcQuack Жыл бұрын

At 8:28, the screen shows "select all" and a Delete button. Unless I am missing something, that is the EXACT thing you're criticizing them for leaving out, is it not? Great review, by the way.

@FauxHammer Жыл бұрын

Sorry, that’s the USB stick showing. Not the internal memory

@JrodsRabbitry 7 ай бұрын

Ordered a Saturn 3 ultra through your link. Received it yesterday and it is destroyed. The bottom of the machine is dented in so badly that it will not sit flat. The LCD is broken and the top frame is bent. UPS must have had fun with this one. I sent elegoo an email. Has anyone had experience with their support? I've only had creality printers in the past and I'm hoping elegoo support is better than that?

@HakkeJoe Жыл бұрын

Where would you place the Saturn 3 Ultra on your Top Tier List? Rank 2 i guess ?!

@FauxHammer Жыл бұрын

Yep, 2 it will replace the M3 premium

@bulletsie 11 ай бұрын

Great video, I Love Elegoo! had their mars, saturn1 and saturn2 printer and their nepture FDM. My original saturn1's on the way out as I've got the LED wont turn off issue that I believe is a dodgy mosfet which only happened after I updated the firmware. I'm currently looking at the Saturn3 Ulra as there's 100bucks discount at the moment. I had wanted to go DLP so I would not need to worry about LCD screens but the printsize on the current offerings is too small I prefer the bigger print volume so looking at the S3. Some questions about ACF (Its new to me) Can you put ACF on older Printers that use standard FEP If the ACF gives crap results on an Saturn3 Ulra and you change it to a standard FEP do people need to adjust Exposure times and what other settings ? ~B

@FauxHammer 11 ай бұрын

ACF is fine on the Saturn 3 Ultra it seems. You can use acf on older printers and you may not need to change settings but you’ll need to relevel.