Elegoo Uno R3 Smart Robot Car Kit V 3.0 - FULL REVIEW - Arduino Kit

No video

Elegoo Uno R3 Smart Robot Car Kit V 3.0 - FULL REVIEW - Arduino Kit | Max Imagination

Рет қаралды 48,375

Күн бұрын

Hey everyone! In this video, I unbox, assemble, and test the Elegoo Smart Robot Car Kit 3.0 PLUS, and fun and educational robotics kit, the car can follow lines, avoid obstacles in its way, and can be controlled via Bluetooth or by an IR remote. I had a lot of fun with this kit Elegoo sent me, I recommend you guys to get one of these for yourself too!
Buy this Smart Car Kit on Amazon: amzn.to/3VlOazX
Download an Arduino file: drive.google.c...
👕 Grab my exclusive Merch here! - max-imaginatio...
----------------------------------------------------------------------
👉 Visit my online Storefront: sites.google.c...
----------------------------------------------------------------------
☕ Buy me a coffee: www.buymeacoff...
----------------------------------------------------------------------
Instagram: @max.imagination - www.instagram....
Instructables page: www.instructab...
----------------------------------------------------------------------
Disclaimer: Amazon purchase links below are affiliate links. It doesn't cost you extra to buy through those and I just get a tiny commission. Thank you!
Music tracks used in this video:
Juno In The Space Maze - Loopop
Two Face - Cosmic
Santorini 2 - Vibe Mountain
Randy Butternubs - Dyalla
Danger Snow - Dan Henig
#elegoo #robotics #arduino

Пікірлер: 31

@MaxImagination 3 жыл бұрын

Hey everyone! The comment section has finally been re-enabled over the whole channel after 2 years by KZfaq themselves who shut it down in the first place. Glad to be in touch with my viewers again! :)

@Kevin-mh8hj 2 жыл бұрын

hi do you have the 4.0 version?

@Shibzzeg Жыл бұрын

Thank you for properly disclosing the sponsorship

@vedakthakur656 2 жыл бұрын

Hi , Iam Vedak Thakur. Iam an Indian and 14 years old I have found your vedios very helpful. I have also seen that you reply your viewer as soon as possible. Actually Iam having and order to sell a car and I was really worried that how Iam going to write a code to controll many of the functionallty together . Iam really learning many Things from your vedios............and I respect yo so much. BEST OF LUCK FOR YOUR FUTURE PROJECTS .............

@MaxImagination 2 жыл бұрын

Hello, Vedak. Thanks for watching my channel, I appreciate your kind support :) Please specify what kind of car you need a code for, I actually may already have that code saved somewhere for controlling a car like the one seen in this video, if you need it, I can email it to you. Cheers, Max

@vedakthakur656 2 жыл бұрын

@@MaxImagination ok, will you please help me out for code

@vedakthakur656 2 жыл бұрын

@@MaxImagination I want to make the same type of car which you have made in this video but I want to use 4 * IRsensor instead of using servo and ultrasonic sensor. Do you have any idea about how to write the code..... Remember that four IRsensor's will be placed in four corners of 2wd round chassis...... I will send you the photo of chassis on email

@vedakthakur656 2 жыл бұрын

But I only need the obstacle avoiding code with four irsensor's

@yakovhammer5739 Жыл бұрын

Thanks for the awesome video! I have never in my life built a robot. Would you recommend this for a beginner like me?

@MaxImagination Жыл бұрын

Thanks for your comment! Sure! I think this would be a great beginner's kit.

@nat_5595 2 ай бұрын

would you know if it is possible to control this with a transmitter controller, instead of the app or remote control it came with ?

@MaxImagination 2 ай бұрын

Hey! Yes, it is possible. Watch my Arduino transmitter video where I control this car: kzfaq.info/get/bejne/ap2VdbWoq7fUXZs.html

@eweremoseri5697 4 ай бұрын

Cool

@dakotacarpenter7702 6 ай бұрын

Do you think it would be possible to add a speaker? Assuming it has an FPV camera, it would be cool to be able to talk from my phone, through the speaker mounted to the car. Then again, the camera may not record audio.

@MaxImagination 6 ай бұрын

With the right audio I2S mic and corresponding programming setup with an ESP32 board, it may be possible, yes.

@ShortHuman1 8 ай бұрын

Can you use the arduino it comes with for other projects? I would love to be able to take the components and make custom bots in the future

@MaxImagination 8 ай бұрын

Yes, you freely can with whichever code you please to upload to it.

@SadececKaka 9 ай бұрын

Yerdeki bantlar elektrikli mi yoksa sade

@MaxImagination 9 ай бұрын

Plain electrical tape

@GaryParkin 3 ай бұрын

Hi Max. I was thinking tank treads but when I saw this car I was hoping you did a review. Thank you. Engineering question please? can you alter the speed of the car by programming? I'd like to slow it down. I plan on adding more sensors like a LIDAR chip to digitize my living room just for fun. I was also thinking of adding more options like an on board camera, or an ESP32 and run it with WiFi. Any ideas?

@MaxImagination 3 ай бұрын

Hi, Gary. You're welcome. Yes, you can alter the speed by adjusting its code - by changing the PWM values (normally 255) to some value lower. However, if the robot works based off digitalWrite which is HIGH/LOW only, you'll need to rewrite the motor driving part of the code to write to the PWM pins with varied speed. If you're interested to add an onboard camera, I suggest you look into Elegoo's latest version of this car with an ESP32-CAM. Cheers.

@GaryParkin 3 ай бұрын

@@MaxImagination Excellent! I'm off to Amazon. I don't mind rewriting the code, in fact I'll prob. tinker with most of it.