No video
Elgato Wave Mic Arm - Is it worth it? Full Review
Рет қаралды 51,953
Күн бұрын⚡ Alerts, Overlays, and Assets for Your Streams from VBI: bit.ly/VBI-Coupon
The Elgato Wave Mic Arm is a robust boom arm designed to hold any microphone you have. Compatible with 1/4, 3/8, and 5/8-inch mic mounts, Wave Mic Arm works right out the box with microphones weighing between 250 g / 0.55 lbs and 1,000 g / 2.2 lbs. It works great with my SHURE SM7B!
👉 Elgato Wave Mic Arm (Elgato): bit.ly/ElgatoM...
Elgato Wave Mic Arm (Amazon): amzn.to/3LQSdBl
👉 Elgato Wave Mic Arm LP (Elgato): bit.ly/ElgatoM...
Elgato Wave Mic Arm LP (Amazon): amzn.to/3E10TCX
👉 Elgato Wave 1 (Elgato): bit.ly/ElgatoW...
Elgato Wave 1 (Amazon):amzn.to/32v1tYU
👉 Elgato Wave 3 (Elgato): bit.ly/ElgatoW...
Elgato Wave 3 (Amazon): amzn.to/3JePAHu
👉 Elgato Wave XLR (Elgato): bit.ly/ElgatoW...
Elgato Wave XLR (Amazon): amzn.to/3rcxD4I
👉 Elgato Wave DX (Elgato): bit.ly/ElgatoW...
Elgato Wave DX (Amazon): Coming in 45 days
🔗 InnoGear Microphone Arm: amzn.to/3iun7Rz
🔗 RODE PSA 1 Microphone Arm: amzn.to/3xqDJ1U
🔗 I made a full comparison video of the Elgato Mic Arm and the Mic Arm LP: • Elgato Wave Mic Arm Lo...
🔗 My all in all Dual PC Stream blog post with all the videos you could need for different situations. It's super helpful and you might like it: bit.ly/MurrayD...
🎵 Use my music from AmpassBeats in all of your content for free:
solo.to/ampass...
Or search AmpassBeats
Stalk Me:
►►Discord: discord.io/Mur...
►►Website: www.ampassfilm...
►►Twitch: / murrayfrost
►►Twitter: / ampassfilms
Business Inquiries or Request Support:
murray@ampassfilms.com
#murrayfrost #elgato #elgatomicarm
@wewonbro1620 2 жыл бұрын
The big and long intro actually sold me. That exactly what I wanted to know since I have a fairly wide desk. Thank you!
@MurrayFrost 2 жыл бұрын
aye. glad it helped man!
@wewonbro1620 2 жыл бұрын
@@MurrayFrost I’ve been using it in my streams for the past week, absolutely love it! I have big desk so I can reach far and close places
@Authintix 3 жыл бұрын
at 3:11 I believe you accidentally said "Rode" Wave mic arm instead of Elgato. Dunno why i caught that lol keep up the good work!
@MurrayFrost 3 жыл бұрын
Lol. Elgato themselves also pointed this out. Quite embarrassing but at least I know you were paying attention 👍😉
@mikey1sdf761 Жыл бұрын
Very helpful video. I really liked that you covered pretty much everything to do with the mic, gave multiple options for how to set it up, and even lesser priced options to consider if your budget doesn’t allow you to buy this one.
@PokeBeardTCG 3 ай бұрын
Can it go perfectly parallel?
@justpops 2 жыл бұрын
Just bought one, your review was very helpful. Especially showing the adapters.....
@MurrayFrost 2 жыл бұрын
Nice! Glad it helped!
@flynpaz 5 ай бұрын
Nice video brother. How has that mic arm held up over the years?
@nightmare5927 Жыл бұрын
My only complaint about the arm is the packaging, there's nothing to protect the arm from the side you open it up from and I had a few scuffs on mine that didn't buff out but still an amazing product and arm very happy with my purchase!
@edwin4625 Жыл бұрын
3:51 Buy an 'Extension Tube for Desk Stands'. It extends that part a few inches so you can twist it around 360. Yes, I know you shouldn't have to buy it but it's the solution you're looking for. (Old video I know but my answer is relavant for anyone thinking of buy this mic arm.)
@ZmanTok Жыл бұрын
I actually got the low profile a few months ago and hated it. But had given my other boom arm to a friend. Bought the Blue compass and found out the Wave:3 was too light for it. Returned it and ordered this one. I’m really excited to use it.
@unrealfeedzz 3 жыл бұрын
I ordered it today because the innogear didn't fit in my desk.... and I also loved the wave arm design and I have a shure mv7 so being lightweight, it was a concern for me
@MurrayFrost 3 жыл бұрын
You won’t be disappointed
@jordantherubio 2 жыл бұрын
yeah would get the low profile but its not available so its been out for about 4 months now but this does look cool and since you can remove the extender i might just get this now and its the same price. thank you!
@IiTzJasonAyo 10 ай бұрын
Is fantastic I will buy one thanks for the review 😊😊
@AMdvij Ай бұрын
Is the pin that fits into the holder on the countertop made of plastic? O_O
@lloydchristmas4547 2 жыл бұрын
Thanks. I'm interested in the low profile.
@MurrayFrost 2 жыл бұрын
that video will be coming next week if I am on time
@giuseppefoto 2 жыл бұрын
I just received mine today. I like it a lot. I'm going to use it with 600-750gr microphones. Some time ago I bought another much cheaper brand and it was really bad. But I wanted to ask if it is normal for the first part of the arm to be so hard. In your video I see that you move it very easily. And mine is too hard to extend horizontally. Thanks.
@MurrayFrost 2 жыл бұрын
You should be able to loosen it but it should extend all the way
@rafirafal 2 жыл бұрын
Czy to ramie ma trzpienie, ktore wklada sie w uchwyt na biurku w calosci z litego metalu, czy jest to rurka?
@jbrocas1939 Жыл бұрын
Which do you think is better the high profile or low profile arm?
@MEANDITV Жыл бұрын
I have a samson g track pro, it is a 780g bulky boy, this bulky should support it no problem, right?
@skillex2004 Жыл бұрын
Hi I've Been watching this video so many times too just understand something so in the intro there is the microphone arm and a black microphone I have to buy the microphone arm but the microphone doesn't come with the Microphone arm package or does it? What mic is that one on the arm I would like to have that one could you please tell me:)
@StregKoden 2 жыл бұрын
Bad English incoming: I just bought a Blue Compass. But I'm using the "Roccat Torch" mic, in comes in with a weight of around 300 gram. So the Blue Compass right now, can't hold it, it just go straight up all the time, with a small force. it takes 1-3 sec before it pull ups about 5-10 cm. I can see it can take 250 grams, because of the counter weight. Can you please confirm for me, that is real. Like it works, and you can completely free move it around, and every time it also stays after you release the hand from it?
@MurrayFrost 2 жыл бұрын
The Elgato Mic arm will support it. It is a very good mic arm and can move anywhere. Best mic arm out there
@iamTREPP 3 жыл бұрын
does anyone how large the clamp mouth is? unfortunately my desk is pretty thick at about 4.5 inches
@LW-xm5pr 2 жыл бұрын
Hi, is the mount clamp totally metal? Looks like the part above the base is plastic. Thanks!
@MurrayFrost 2 жыл бұрын
It’s all metal but the sleeve on top of the clamp where the mic arm slides in is a hard premium plastic
@Robin____ 2 жыл бұрын
I have the Q2U Samson mic which weighs 318g. Can I use the Elgato mic arm, or will it not be suitable? Do I really have to use the counterweight on the Elgato?
@MurrayFrost 2 жыл бұрын
The mic arm will do fine with that mic. If it is not heavy enough, the counter weight helps a lot and it's not in the way. Super streamlined and slim weight. You can't really tell its there if you have that on.
@Tephnos 2 жыл бұрын
Still happy with it? Also, any chance you know the stem diameter? Hoping it would work in different mounts as I don't want to use a desk clamp.
@MurrayFrost 2 жыл бұрын
I love it. By far my favorite mic arm ever. It can go on some pretty thick desks
@Tephnos 2 жыл бұрын
@@MurrayFrost Hi, good to hear. Sorry, by stem, I mean the pole bit that goes into the clamp. I want to know if it is the standard 12.7mm diameter and so will be able to fit other mounts (like the Heil drilled desk or wall mounts).
@pcummins 2 жыл бұрын
@@Tephnos Stem diameter is 1.5cm so slightly larger than what you're expecting.
@Tephnos 2 жыл бұрын
@@pcummins well shit. They really need more mounting options than just a desk clamp.
@tyron_6664 3 жыл бұрын
Hello, i want to use this arm with shure sm7b and shock mount, but i heard the max load capacity of this arm is 1kg but the shure sm7b with the shockmount from the rode the load is about 1.4/1.5kg. Idk if with this setup the arm can support everything. Can you help me?
@MurrayFrost 3 жыл бұрын
I don’t know what shock mount you want to use with this but it’s not really needed
@tyron_6664 3 жыл бұрын
@@MurrayFrost thank you
@whodemclan 2 жыл бұрын
Made the mistake of ordering mine on Amazon I ordered it last month and it won't be here till February 6th
@MurrayFrost 2 жыл бұрын
Hopefully it arrived by now. :)
@Colleck118 3 жыл бұрын
I’m curious, what XLR cable are you using?
@MurrayFrost 3 жыл бұрын
Just a normal white one. amzn.to/3lXTxr1
@Colleck118 3 жыл бұрын
@@MurrayFrost Thank you! Great video.
@lambo7 2 жыл бұрын
Good video. Can you tighten the middle joint as mine seems a bit loose. Thanks
@MurrayFrost 2 жыл бұрын
Yes. You can make them tighter if you want
@lambo7 2 жыл бұрын
@@MurrayFrost do you know how? I can’t see any screws or anything? Thanks
@macmovieman1 2 жыл бұрын
@@lambo7 I kinda of would like to know this too.
@lambo7 2 жыл бұрын
@@macmovieman1 you can’t tighten it. I sent mine back in the end.
@crimsondragon95 Жыл бұрын
@@lambo7 You can tighten the horizontal rotation by using the allen wrench they provided on the sides
@ThePandaProcrastinates Жыл бұрын
What DSLR camera desk mount is that?
@MurrayFrost Жыл бұрын
This one amzn.to/3AyGumf
@hadoukenocx4746 2 жыл бұрын
2:53 Plastic too ?! wow thats a no go thats the main thing wehre you pull always over time it will snap D:
@MurrayFrost 2 жыл бұрын
It’s metal inside. Plastic cover for looks.
@DayaTom 2 жыл бұрын
does it come with the raiser, anyone know?
@MurrayFrost 2 жыл бұрын
It comes with an extension for hight, yes.
@DayaTom 2 жыл бұрын
@@MurrayFrost Yas, thank you!!!
@nomcookieman7281 2 жыл бұрын
how'd you get the SM7B on there? mine won't screw on
@MurrayFrost 2 жыл бұрын
The mic arm came with adapters. It will fit on just fine. I did not need any additional purchases.
@nomcookieman7281 2 жыл бұрын
@@MurrayFrost is there a way you could possibly show me how? ive tried using the adapters
@adhilnoushadnn369 2 жыл бұрын
Is it good with blue Yeti mic ?
@MurrayFrost 2 жыл бұрын
It’s good with any mic
@adhilnoushadnn369 2 жыл бұрын
@@MurrayFrost thank you ❤️❤️❤️
@barurlamhauge8249 2 жыл бұрын
can this boom arm hold a hyper x quadcast?
@MurrayFrost 2 жыл бұрын
yes. any mic
@devincampbell5007 2 жыл бұрын
So far mine has been holding my Hyper X Quadcast S very very well without any problems
@Caprese. 3 жыл бұрын
$50 more and you get the gator frameworks deluxe, it's SUPER sturdy & comes with an integrated cable
@MurrayFrost 3 жыл бұрын
Never knew about it
@Potatosayno 2 жыл бұрын
The gator frameworks deluxe also comes with unreplaceable cables that will malfunction in 2 weeks and will make the product unusable.
@hUrrikaneraiderx 3 жыл бұрын
Can u please do a pre built gaming PC giveaway
@MurrayFrost 3 жыл бұрын
😉🤫
@hUrrikaneraiderx 3 жыл бұрын
@@MurrayFrost I also want to thx u for taking time out of ur day to reply to the comments
@qtpie7082 3 жыл бұрын
lol 1st
The Provoked Prawn
Рет қаралды 18 М.
Edward Smith
Рет қаралды 486 М.