Elinchrom Octabox Set Up

No video

Elinchrom Octabox Set Up

Рет қаралды 30,050

Күн бұрын

In this tutorial I'll show you how to set up and break down your Elinchrom Octabox. When I first started out no one showed me how to do it, and I wanted to give you a head start ;) Special thanks to Elinchrom for providing equipment.

Пікірлер: 53

@benmaffin 3 күн бұрын

Instructions from Elinchrom for their Octabox, 1/10. Instructions from Aaron, 10/10!

@lukasvandewiel860 2 жыл бұрын

As a photographer who just got his first Octabox, and was looking baffled at all the parts, thank you for telling me what to do with them.

@nataliegassner7105 9 ай бұрын

Thank you so much!!!! I couldn't do it and you've really helped me ❤ 1am here in the UK 🙈

@LaurenMarek 5 жыл бұрын

Couldn't for the LIFE of me figure out how to break down my octabox. THANK YOU FOR THIS!

@AaronAndersonVisuals 5 жыл бұрын

I just saw this, thank you Lauren, happy to help!

@issacdhan 8 жыл бұрын

Thanks a lot, Every video on youtube only told how to Assemble, but no one told how to Disassemble. I think this is the only latest video on this subject. You can tag it with those keywords. Will be helpful for many. Thanks again

@soodwah 2 жыл бұрын

Elinchrom needs to be paying you.....perfect set up!!

@wolvy1 7 жыл бұрын

Just what I needed! I figured there must be an easier way. Would have been nice if Elinchrom had included such instructions with the octabox. Thanks for the video!

@AaronAndersonVisuals 7 жыл бұрын

I agree! It was mind blowing when we figured it out lol. Thanks for watching and I'm glad it helped!

@tahersafari3104 Жыл бұрын

Awesome presentation ❤

@billjaynes9234 4 жыл бұрын

Though I don't own and actual Elinchrom softbox (mine is an Interfit), the concepts here really helped me get it together. I was ready to give up. Couple of tips for anyone who is trying to use the Elinchrom Rotalux speedring on an Interfit softbox, you'll first have to put the rods in a vice and hammer off the smaller of the two end tips. Then, because the Interfit has a velcro opening, make absolutely sure that the velcro is locked tight around the speedring. When installing the first rod, make sure the speedring doesn't escape the hole for it which mine did SEVERAL times. Once the second rod is in place, it is much simpler but I found that I had to stand on the speedring (well, put some weight on it) on the opposite of the rod I was installing. Once the first four rods are in, there is almost no chance of the speedring escaping the hole and making your life miserable as it did mine. Granted, the Interfit isn't designed for the Rotalux ring but I was able to make it work. No one online had any advice about this little problem so perhaps my experience will help. Thank you so much for taking the time to make the video. I hope never to have to assemble this bad boy again! phew!!!

@AaronAndersonVisuals 4 жыл бұрын

Dang man, glad it helped and I hope you never have to do it again either!! Thanks for the info!

@billjaynes9234 4 жыл бұрын

@@AaronAndersonVisuals well, as an addendum to the above, while folding it up, the velcro opening, umhh...opened and spit the speedring out. Had to start over again but only after I sewed the opening closed completely with very heavy thread. After I started over I had no further problem now that that thing is sewed closed. Of course, THIS little project wasn't quite what you had in mind when you did your video but it surely was helpful as I was trying to make something not designed for that speedring work. It does now...phew.

@Arjun_Photography0800 Жыл бұрын

Thanks man, you saved my day

@01mrlek 7 жыл бұрын

Awesome. I have a rotalux that i take with me overseas and did my head in putting together every time. Video made things a snack.

@AaronAndersonVisuals 7 жыл бұрын

So glad it helped man! Thanks for watching!

@debbiepacker. 6 жыл бұрын

Thank YOU! I watched another video that said to snap everything in after all the poles were in, but I couldn't make that work (after about six tries) on the initial setup, so I was VERY happy to find your video. It all went together easily on the very first try. I'm guessing after it has stretched out, it's easier to snap them all back down after folding it up. I think I'll wait a couple weeks to try that.

@AaronAndersonVisuals 6 жыл бұрын

You're Welcome! It will definitely get easier over time, the first is always the worst!

@alfredkennedy1906 Жыл бұрын

thank you!

@SBurlot 6 жыл бұрын

At last a useful video about the set up ! Thanks ;)

@mjj8098 3 жыл бұрын

thank u so much ur the best....

@Garimadixit 3 жыл бұрын

Thanks for this video..U should also show how to fix this to light. I was doing it wrong way....and thn saw a video somewhere and only then I was able to put this on light

@a.g.4843 2 жыл бұрын

Thanks man

@nicopakvis2237 6 жыл бұрын

Nice video which helped me at the end. But one thing the guy forgets to mention. It is possible to assemble the octa with the ring upside down. When you are ready you discover that it is not possible to click the octa to the flash. It happened to me, but it will not happen again.

@nathanielrosa1 7 жыл бұрын

Thanks especially for that final tip!

@AaronAndersonVisuals 7 жыл бұрын

You're welcome! I can't tell you how much time I wasted not doing this for years :)

@sababa1022 4 жыл бұрын

You saved my life man!

@Petramojomusic 3 жыл бұрын

How do we connect it to the stand?And light?Amazing video thank you!

@deaganstudios8888 3 жыл бұрын

Great video! Thanks

@juliabradley5785 4 жыл бұрын

Thank you. This was so helpful!

@AaronAndersonVisuals 4 жыл бұрын

So glad it helped Julia!

@SimonAndersonphotography 8 жыл бұрын

Really cool video, well done

@AaronAndersonVisuals 8 жыл бұрын

Thank you sir!

@kenuwhoknew 4 жыл бұрын

Thank you, man!

@AaronAndersonVisuals 4 жыл бұрын

You're most welcome!

@twowanderingboys7592 6 жыл бұрын

Thanks for video

@camoriestalks 7 жыл бұрын

best video thanks for the video

@AaronAndersonVisuals 7 жыл бұрын

You are most welcome, thanks for watching!

@EagleXL 6 жыл бұрын

Thanks for the great tutorial. I just have one problem which I can't solve myself: The moment I put the first rod in it's pocket, the speedring just moves, and I jus't can't keep it centered. What is the secret? :(

@AaronAndersonVisuals 6 жыл бұрын

Try to get the lip of the speed ring to catch on the inner circle. Once you put in the first rod if you put in the rod opposite to the one you just did it should hold the speed ring in place!

@EagleXL 6 жыл бұрын

Appreciate the quick response. The other issue I'm having is that I can never adjust the rodes directly with the seam, which probably prevents me from pulling down the brackets at the end. No matter how much I adjust the speedring in the process, I'm somehow ending again and again with a slight misalignment...

@EagleXL 6 жыл бұрын

Got it finally. Thank you!

@AaronAndersonVisuals 6 жыл бұрын

Awesome! If there is anything else you need just shoot me an e-mail aaron@aaronanderson.photo

@EagleXL 6 жыл бұрын

Thanks! Subscribed 😉

@blakeaghili1090 6 жыл бұрын

Oh wow that’s MUCH easier to carry a large Octo on the set ... My 5 Foot Octo Profoto stays in studio because it is so hard to disassemble it ... no second diffusion layer is not good tho , hopefully their other models have two layers of diffusion

@MonalisaMukherjee 5 жыл бұрын

Thanks

@goahead8999 6 жыл бұрын

Elinchrome doesn’t include the easy carry/storage bag for Octa in India...

@carolinamaristad9369 12 күн бұрын

Looks easy but it's not 😭😭 I'm about to sell it because it's difficult to put together

@AaronAndersonVisuals 12 күн бұрын

You can do it! Just get it put together once and you don’t have to do it again!

@MSmatt76 4 жыл бұрын

Aaron, sometimes a lug on an Elinchrom mount will become difficult to pop in and out. I've tried WD-40 and messing around with it but can never seem to fix it, usually I buy a new mount from frustration. Do you have any advise for this?

@AaronAndersonVisuals 4 жыл бұрын

Matthew Hodges I’ve had that issue after a few years on some of them, and typically I just end up replacing the speed ring. Usually I can wiggle it in for a bit but eventually it doesn’t work anymore. No real truck on this one, I think it just happens!

@minedgroundhog 3 жыл бұрын

@@AaronAndersonVisuals ah okay, i was looking for a fix to this, just tried wd-40 and i have now a blister on my thumb from forcing the thingies to snap xD but just a new speedring would do the trick?