really for my own reference because having to scroll through the video for what I need is very tedious and the imgur instructions are broken. Plus the layout of all the parts we need isn't very clear. 00:00 Arm Frame 01:34 Leg Frame 04:35 Torso Frame [Pelvis] 06:59 Torso Frame [Chest] 13:50 Arms Cont. LJ Trinket Time [since I have no clue what that are supposed to be at first view] 18:50 LJ-Trinket 20:32 Skirt 21:18 22:30 23:15 24:02 24:52 KULTA WITH CHAIN 25:15 FrameTron Assemble 26:30 Armor Time! Legs 27:18 Lower Torso, those Trinkets 30:10 RAAABBBBS 33:50 Neck Trinket 37:15 Staff 41:45 Makooti Reborn

I love that this design keeps OG Teridax' chunkier body type. It also makes great use of the CCBS build system.

Having Eljay show me how to build a Lego model has always been one of my fantasies... Dreams do come true...

I finally have this badboy built, and WOW! Holy smokes, this is by far, the most detailed G2 model ever. And the best Makuta model ever! The build was very easy thanks to you Eljay, but building the armour from the circular piece up got pretty tricky. Some shells were a very tight squeeze to finally get on, but I managed. The shoulder pad assemblies were REALLY tight.

He looks very regal. I actually like this version better than 2003 Makuta.

They really should've just come out with the set

Don't worry too much about it but just to clarify for anybody picky like me, there are two more inaccuracies than the ones mentioned in the corrections video: 1 - the top armour pieces on the chest plate are attached using 4 angle bends (where the chain connects) when they should be 5 instead. 2 - the centre of the chest plate is attached incorrectly, instead of using two half busheens to hold the pin in place instead use a grey technic lift arm with one hole and one axle cross. The hole will attach to the blue peg you left exposed within the torso and the axle hole with hold the pin used the attach the centre of the chest plate. This correction will stop the chest plate from wobbling.

Man, ttv should make an album whith all of their music and sell it as TTV: The album Or even better TTV: The Musical

I have all the sets required to build this, but I don't want to disassemble them... one day I think I'll just get all of them used off of Bricklink. I do have both an extra LoSS and an extra Uniter Tahu, so I guess there's only 5 other sets to worry about. Bionicle 2015-16 is not currently one of my priorities though, and even then completing my base collection comes before assembling this guy. He's like a magnum opus.

Asymmetric means not symmetric. Mirrored means to do the same thing on the other side.

It was a True Thrill to build, this Amazing Set with the Help of yours TTV! I'm really happy to have this Figure, thanks for the help of Eljay! :D It sad, that this "Set" will "never" receive a Serial Number from Lego, but I'm proud to be a part of a Community, that is this Supportive towards the others!

I don't know what to say but this is a 3rd villain of the Lego Bionicle The journey to One show 🎥

Pretty much all the axles Elijay calls 5-long are 4-long. Also, there's supposed to be a gold foot behind his loincloth-like feathers. The gold Umarak the Destroyer horns are attached to that with some more pieces which I figured out, but I don't really want to type. Anyways, thanks for making this video, for those who haven't figured him out yet!

I used the leg and torso design as inspiration for my MOC, Chronos. Thx TTV! :)

I already did it without the instructions, it was an interesting experience but took me liek 6 hours.

25:51 Look very closely to the right....

If only we had a official version of the mask of ultimate power. I think that mask would look good on this makuta.

I've come to learn that the even axles in the bionicle G-2 line were always black, the the uneven ones were always grey.

One of these days I'll have this mans built physically.

FINALLY WE CAN BUILD THIS PROPERLY!!! Now I just need to decide if I want this on display or the sets that this is made out of

ahhhh memories i remember building this at the star of lockdown in 2020

I would love to know exactly what parts from umurak destroyer are used, because it's not getting released where I live. I know I don't have the beast jaw piece however I kind of don't want to go through this if I get half through then realise I can't actually make it

gonna use this when I have the sets.

Eljay You should know that the black plus pins are even numbers, and the light grey ones are odd. Your 5 is actually a 4

So due to Tahu Uniter being ridiculously expensive I was wondering if I could get a pieces used list from Tahu for this model, as I believe it would be cheaper to buy the separate parts I need over the whole set. If parts can be used from another set (IE pins and axles) then they'd be through all the other sets before Tahu. I was able to get every single other set for the combiner, and I do have a Tahu Uniter, but I plan on keeping him together, and using the parts from him then buying whatever I used for the combiner. But having an idea of what I need to purchase would be really useful so I know what hole i'll be getting into. Thanks to whoever can get me the list!

I built this even though I have 3 of the seven sets using my other pieces I had in the nib

wish i have all the piecesto create this masterpiece

I recently started building this guy. My parts are almost over, lol.

I'm gonna cry right now

Oh built this guy at the start of lockdown

I miss this

Can't wait to get umarak the destroyer ti be able to build it

looks glorious, good job

wish i saw this back in the day when the sets were still around. now it's def gonna cost a lot to build this.

It wold be great if you could list the sets in which the parts are used so we know what to buy to make this Makuta

Take a shot every time he says contraption(s).

I really like your video but what sets do we need to make Makuta?? Lachlan

you are my hero

One of these days I'm gonna buy all the sets, likely used, and try to build him myself.

Welcome back, Eljay!

finaly dis vid

he seems flustered on the shell sizes. they all have their size number on the side they connect on

Best tutorial right here

Well if we can get the money i should be able to find these in stores easily 'cause in Australia G2 sold so badly that there are still 2015 sets on sale

Looks great but Is missing the mask of ultimate power

I wish I knew how many parts from those sets went unused, I don't know if its really worth it to buy them again to make this set

thank you eljay

Is it possible for you to say something about how many parts from each of the sets that make this up is actually needed? For instance I imagine that there are relatively few parts from, for instance, uniter Onua in this model, so it might be better to buy the parts needed separatly instead of buying an entire Onua. With other sets that make up this model, that contribute with more of their pieces, it may be just as well to just buy the entire set?

Just wanna remind you the hand piece are not G1 they are G2 hand pieces sorry if I’m wrong

I like this moc it is great good job eljay

THANK YOU!!

Это шикарно!

I built it, but because I don't have Tahu some gold parts are missing.

Feathered co- what is that?

I need more money 😢 I still don't have most of wave 2

I need some help please. :( My Son just got done building Makuta and he's missing the black ball on the top of the staff. Would any of you know which series it's from?

wait I only need to buy 4 sets... yesss

Hey Eljay could build a titan moc version of this but with tahu if you could please

I have a question for you. If Ekimu were to have Ultimate Power like Makuta, what will his form look like??? Is it gonna be different from Makuta's ultimate power form??? Can you make a moc of Ekimu's Ultimate form???

I did it i have made makuta in 2018 it was hard to find the sets and i hat to youse mine only umarak the destroyer but i have made him

I noticed the main set used for pieces was Mask Maker vs Skull Grinder times two.

friction joints aren't my favorite piece. they restrict movement at most times because they end up disconnecting the other joint pieces. Though they do help with posing.

Thanks dude

man, that open ball joint on the staff XD

Do you only need the sets listed in the description

Awesome dude

You guys going to try to make overlord makuta?

This is good, but you've already told us that it is impossible to pose. But I'm just grumpy that I only am off by two sets to make this and we don't even get to buy it.

YES! Finally!

Idea: you know the general grievous buildable figure? just use makuta's mas and different armor pieces.

Warning this makuta will require all the toas and the makuta mask from the polybag and I mean uniter toas and creatures.

how can i remove the play feature with his arms? because its annoying

The Toys R Us locations in my area have Bionicle sales all the time. Might have to pick up extras of some sets to build this. Still can't find Ekimu though

Would it be possible to see any instructions of the Overlord Makuta?

It's interesting that the part with Ikir's head, there are different ways of making it (from the official photos themselves, they use two different methods!).

Bit of a dumb question. But would it be possible to swap out all the trans orange for trans purple. Black and/or gunmetal grey?

He is so badass ._. so roughly what would it cost to get the sets to build him now? I mean as it is just for a combination model it would be fine if things like the box and instructions were missing, even some of the parts you don't need.

YES!!!! THANK YOU, ELJAY!!!!!!!!!!!!!!!!!!!!!

Can somebody give me the code of the pieces to make this set? Cause I don't want to buy duplicated sets just to make this one. Can u pls help me?

Would there be a built model on eBay for a chea pl price?

What is the background music??

Is there a picture ver. Of these instructions because I suck a following videos

I'm only missing two of the required sets!

When are you going to review the glatorians?

Help me understand this: This set requires 15 small black balls with an axel hole going through them. Tahu has 4. UtD has 4. LoSS has 2. MMvSG has 4. That's only 14! None of the other sets have any!! So where is everyone who is building this set getting the extra ball from??? Is it just me or...?????

Um if it isn't too much to ask, can you make a parts list?

Wonder if you could get away with building this without the hunter or destroyer? Those two sets have shoot up in price like crazy.

hi just wondering what are the pin Axle sizes for the staff weapon

i made an easy gun metal and purpel makuta with an Hammer like ekimu only in purple ;3

Seriously, i have no idea where you get the extra ball joint for the staff!?

how much would you sell makuta fore

how many pieces ?

What size axle size is the 3rd one you added on the Staff?

Hey Eljay, can you leave the names of the songs that you use in the description? Specifically the Recap Review intro music and the music from this video? Or all of the TTV intro music in general

Ah, it seems like just yesterday I watch Eljay sass MNL on his Makuta video. Good times.

dude can i have the part list for it?

Its so hard to make it but I can make it

Could you make a downloadable Instruction manual like the ones Bionicle makes?

Eres el mejor

Is this a moc, or is this something Lego intended you to build by buying these sets?