R9M & OM626 | Assembling Cylinder head | Liquid sealing compound EL-Liq74

R9M & OM626 | Assembling Cylinder head | Liquid sealing compound EL-Liq74 | Elastomer elements

Рет қаралды 36,919

4 жыл бұрын

In this video you will see:
- Assembling of Cylinder head
- Apply of Anaerobic sealing compound EL-Liq74
www.elring.com/fileadmin/Date...
- Tighten of bolts in the correct order with torque
web.tecalliance.net/elring/de...
- Installing of diesel injectors
web.tecalliance.net/elring/de...
- Installing fuel pipes to injector
- Replacing of foam and elastomer elements on oil absorber

Пікірлер: 20

@sonyhk3824 4 жыл бұрын

Fantastic job. Cheers guys

@guilhermedossantos1998 10 ай бұрын

You guys could be doing these videos on every single engine, these are really helpful

@elringdasoriginal 7 ай бұрын

Thanks for your Idea and nice feedback! :)

@aamerkhazemalabady 4 жыл бұрын

Very very good from lraq

@user-gl4dc2eu6o 4 жыл бұрын

Very nice work .from algeria

@user-rb8vh9eh7c 4 жыл бұрын

Super...

@islamislamo2278 Жыл бұрын

Super

@eugeniiks3152 Жыл бұрын

Здравствуйте, какой момент затяжки крепления форсунки и момент затяжки гаек топливопроаодов, спасибо.

@elringdasoriginal 10 ай бұрын

Achtung: Siehe Befestigungselement Wichtiger Hinweis . 5. Die Schrauben (1) an die Einspritzdüsen (2) anbauen und mit 7 (62 lb in) plus 180 Grad festziehen. Dazu den Schlüssel EN-470-B verwenden. 6. Wenn die Einspritzdüsen (2) an einen NEUEN Zylinderkopf angebaut werden, muss das folgende Anzugsdrehmomentverfahren beachtet werden: 6.1. Erster Durchgang: Die Schrauben (1) an die Einspritzdüsen (2) anbauen und mit 20 (15 lb ft) festziehen. 6.2. Zweiter Durchgang: Die Schrauben (1) lösen. 6.3. Letzter Durchgang: Mit dem Schlüssel EN-470-B die Schrauben (1) mit 7 (62 lb in) plus 180 Grad festziehen.

@h.m.sdasilveira5710 3 жыл бұрын

Das freut mich.

@krutikpanchal8561 4 жыл бұрын

Very good job

@manekin7520 4 жыл бұрын

Wery nice job

@eddydar 11 ай бұрын

How do you line cams up?

@elringdasoriginal 10 ай бұрын

Hey, cams are fixed in top of cover. There are fixed by camshaft fixiation clamps. 🙂

@MihaiViteazulVoievod Жыл бұрын

Is this ok for 2 stroke crankcase halves?

@elringdasoriginal Жыл бұрын

Yes, you can use it.

@tostosov764 3 жыл бұрын

Renault & Mercedes are using same engine? R9M & OM626

@elringdasoriginal 3 жыл бұрын

Hello @Tostosov, Yes it is! Same engine for both brands. More informations you will find here: de.zxc.wiki/wiki/Mercedes-Benz_OM_622/OM_626 Your Elring Service Team