Embellishing a Bowl - 4Ways Collaboration by Mike Peace
Рет қаралды 4,796
Жыл бұрынThis month we are each doing a bowl with embellishment. I finish turned a bowl of Bradford Pear and embellished with texturing tools. You can watch the other "4 Ways" collaboration members version of this project by clicking on the links below:
The Wyoming Woodturner • Turning an Embellished...
Richard Raffan • Richard Raffan turns t...
Tomislav Tomisec • What happens when you ...
As an Amazon Associate I also earn from qualifying purchases from my Amazon shop www.amazon.com/shop/mikepeace....
You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website www.mikepeacewoodturning.com/
@andrewjoy8364 Жыл бұрын
Mike, many thanks for this video. A ton of interesting, helpful tips for me, a novice wood turner. I was especially grateful for your comments about taking your time.
@MikePeaceWoodturning Жыл бұрын
Great to hear!
@davidmorgan7522 Жыл бұрын
Nice bowl Mike! IMHO, the light texturing was just right as it doesn't draw attention just to that but to the whole bowl. Nicely done. Thanks for sharing! Take care, Dave
@MikePeaceWoodturning Жыл бұрын
Thanks 👍 I appreciate your takiing time to provide feedback, David.
@MarklTucson Жыл бұрын
Really do enjoy these videos. Each one of you brings a unique approach to the monthly project that is really interesting to see and compare. Yours is the third that I've seen for this installment, off to watch Richard Raffan's installment.
@MikePeaceWoodturning Жыл бұрын
Glad you like them!
@alanmullock381 Жыл бұрын
Nicely done Mike👍👍👍👍👍👍👍👍👍👍👍😎😎😎
@SpunbyGreenJeans Жыл бұрын
Thank you for sharing. Much appreciated!
@valeriehenschel1590 Жыл бұрын
Good show of the different texturing options and tools. I found the lathe speed also makes a difference in the texture pattern, especially on the bottom flower. Now, we just need to get you to try some colored embellishing wax on the textures!🤣
@MikePeaceWoodturning Жыл бұрын
Valerie, my experience is that speed only affects my pattern if it affects my tool control. Going slow takes longer but the tool is less likely to jump and that is never good.
@carolriley8472 Жыл бұрын
Great looking bowl...love the texturing!
@MikePeaceWoodturning 11 ай бұрын
Thanks a bunch!
@garthkeck2003 Жыл бұрын
Nice bowl, Mike
@jackthompson5092 Жыл бұрын
Beautiful bowl Mike.
@MikePeaceWoodturning Жыл бұрын
Thank you kindly
@jorisdemoel3821 Жыл бұрын
A nice simple form and very fitting embellishments for it. Interesting use of the vacuum chuck. If I was a tenth as good at turning as any of you are I'd have tried and make that catch into a spiraling decoration and told everyone it was completely planned... ;-) Thanks for another interesting and instructive video.
@MikePeaceWoodturning Жыл бұрын
Thanks 👍 Happy accidents are always welcome.
@tomislavtomasicwoodturning Жыл бұрын
Great bowl Mike.... Awsome texture
@MikePeaceWoodturning Жыл бұрын
Thank you, Tomislav. Texturing is fun to play with.
@saminda803 Жыл бұрын
❤❤❤
@glencrandall7051 Жыл бұрын
Well done Mike. Just the right amount of texturing. Excellent entry to the 4 way challenge. Thank you for sharing. Have a great day and stay safe.🙂🙂
@MikePeaceWoodturning Жыл бұрын
Thanks, you too, Glen!
@kenvasko2285 Жыл бұрын
The texturing on the rim really makes the bowl pop. Good job, good video!
@MikePeaceWoodturning Жыл бұрын
Thank you! 😊
@johnnyb95678 Жыл бұрын
Nicely done bowl. I am really enjoying this series the 4 of you are doing.Thank you!
@MikePeaceWoodturning Жыл бұрын
Glad you enjoy it!
@billk8579 Жыл бұрын
Very nice embellishment. Dresses up the bowl. Will need to get one of the decorative tools.
@MikePeaceWoodturning Жыл бұрын
They are fun to play with.
@jeanlong4285 Жыл бұрын
Really like the embellishment. Great job.
@MikePeaceWoodturning Жыл бұрын
Thanks so much!
@alun7006 Жыл бұрын
Nicely done, Mike. This is a great series - really interesting how different everyone's approach is.
@MikePeaceWoodturning Жыл бұрын
I appreciate your comment.
@julianvelez3938 Жыл бұрын
Sr Mike gracias a usted y a muchos torneros norteamericanos que enseñan sin egoismo, uno como latino puede aprender tantos secretos de la torneria que en nuestros paises no hubiera sido posible nuevamente gracias y que Dios lo bendiga a usted y su familia
@MikePeaceWoodturning Жыл бұрын
Gracias por esas amables palabras.
@RichardRaffanwoodturning Жыл бұрын
Great to see how you and Sam use similar texturing tools and triangular points to create the decorative bands. I'm wondering if the detailing point you use on the rim is the remnant of a spindle gouge. Even if not, I've a gouge about to become a very similar tool.
@MikePeaceWoodturning Жыл бұрын
I add the tiny Vee groove on each side of the texture with a 1/4" point tool. I used two different ones in the video. They are from HSS rods from Amazon but you could grind one from a screw driver. I like the 1/4" but some folks like them larger so you could make one from any old 3/8" bar tool. Here is my video on making one kzfaq.info/get/bejne/d7OfmsSGm8fNeWw.html
@Amybaumgart Жыл бұрын
Will an oil penetrate on the inside where you used the abrasive paste with wax? I’ve never used abrasive paste if I am going to oil as I didn’t think the oil would penetrate. Beautiful bowl Mike!
@MikePeaceWoodturning Жыл бұрын
Yes it will. As long as you keep wiping off the abrasive paste until the residue is gone. I have a video on it.
Tomislav Tomasic Woodturning (Dodir Drva)
Рет қаралды 15 М.
StephanieSu-Etong
Рет қаралды 22 МЛН