EMG STI TTI JW3 2011 Combat Master Disassembly + Tips and Tricks

Рет қаралды 20,322

2 жыл бұрын

General teardown and tips on how to get the most out of your overly bulky but still sexy as f#$k JW3 2011.
Checkout our socials!
Shop: www.eastcoastcustomblasters.com/
Instagram: eastcoastcustomblasters
Facebook: eastcoastcustomblasters/
Linktree: linktr.ee/EastCoastCustomBlasters

Пікірлер: 57

@azzanoorbergen2136 2 жыл бұрын

Always enjoy your videos D Man especially your Capa strip down and assembling.A huge Thank you for your shout out in this video much love and respect my friend

@7evolance 2 жыл бұрын

Nice assembly video. Thanks. This helps with future maintenance. I owned the MST one.

@Danny-G 2 жыл бұрын

What did you think of the quality of the mst??

@7evolance 2 жыл бұрын

@@Danny-G hand feel wise, it is so good for my first gbb. A lot of work need to be done to prevent the gels from breaking. What I did with it: 1) Change the loading nozzle to CNC one. Kept the original nylon as spare parts. 2) change the original loading nozzle spring, it was too soft. 3) sanded the mag lips, for my case solved the gel breaking issue. 4) only use with AKA hard tenacity gells because of item 3) 5) using ultra force 12kg orange bottle green gas. 6) fps is around 320.

@Maturner7 2 жыл бұрын

@@Danny-G I thought the Emg one in Aus is the mst (c02)? Unless there's a new one, this looks the same as the one I got last year, if there's a better one keen to know 😎

@Danny-G 2 жыл бұрын

@@Maturner7 I believe mst was added to the name by the team overseas that converted them man, all of them were emg sti (which is built with army parts) so emg branded army gun. It did come with co2 mags but i tune everything for green gas.

@Maturner7 2 жыл бұрын

@@Danny-G thanks man, that clears things up I tried the double bell green gas mag in mine but the mag catch doesn't hold it up enough to seal.

@kiyoshigre5869 24 күн бұрын

I had an issue with the hammer the spring got out of position and I had to completely disassemble the interior. I opened it and cleaned it, lubed and fixed the issue but after 20 shots it’s like the slide goes half way. Any ideas? I have replaced the mag with green gas. I don’t have a tester to check fps.

@ChatGPTreally Жыл бұрын

where can i find to disassemble the island barrel one?

@death5397 Жыл бұрын

this has helped a hell of a lot but, i have a problem the original hammer has broken and i need a replacement and ive heard the original hammer is weak is there a replacement i can buy or is there better one and where do i get it (i live in the uk) .

@johndu206 2 ай бұрын

My SRC combo master2011 has replaced the AIP 140% hammer spring and AIP speed Muzzle, but its speed is still 310.The sliding sleeve cannot be automatically fixed.How should I check it

@Astro2nd Жыл бұрын

can’t get my slide to stay back when i put in the mag? any idea how to fix?

@samuelfischer6436 Жыл бұрын

Thanks man, it helps a lot :)

@TheBykala 2 жыл бұрын

Hey! Thanks for the video! It helped me to put my gun back together! Btw my slide lock doesn't lock the slide after the last bb and it tends to fall out really easily. Any tips what's wrong with it? Maybe some spring is missing?

@Danny-G 2 жыл бұрын

hey Ignas :) this is a super common issue with this model and hi-capas in general, I have another video on my channel about it but it's a bit older I will do a new one soon :)

@TheBykala 2 жыл бұрын

Hi! Thanks for the reply. I've managed to indentify the problem- it seems that the slide lock itself is the problem. Tried it with another one hi-capa slide lock and it worked like a charm :)

@Danny-G 2 жыл бұрын

@@TheBykala that's the way friendo just try different bits til something works

@joshuaclark4866 2 жыл бұрын

Whats the best green gas mag for these? Absolutely love my EMG aswell, keep up the quality videos 👌

@Danny-G 2 жыл бұрын

atm my recommendation is the GE 5.1 mags man. They come with a really decent valve stock, fit everything and dont have any issues with the guarder high flow valves

@mtf-alpha-1 2 жыл бұрын

@@Danny-G heya question my mag release broke how do i replace it?

@soplim8632 Жыл бұрын

I got the golden eagle version of this as well

@Danny-G Жыл бұрын

i have to say there is a really big quality difference between the two man, you will be a lot happier with the emg, its built by army armament 100%

@drewslaug4388 Жыл бұрын

Hi! I bought an AIP nozzle for this but it doesn’t fit in the stock bbu. Did you have to buy a bbu? If so, which one fits in the slide? Thanks!

@Danny-G Жыл бұрын

hey buddy! the stock bbu is a bit poo and will require reshaping for the aip nozzle. You can use any tm spec gel hi-capa type bbu though it is full tm spec :)

@wasimgehlen 2 жыл бұрын

Have you got a list of upgraded parts you used? I’m UK based, so shipping from down under wouldn’t be cheap or quick. Also I’m having issues with the slide pin coming out on its own. Lost one, going to order a new one, needs a rebuild. Fantastic video, best I’ve seen on rebuilding one! No fannying around!

@Danny-G 2 жыл бұрын

Hey buddy! So the only parts you really need to get this kind of performance are an AIP nozzle and a 140% AIP hammer spring. I recommend going the guarder valve knocker only for longevity, it won't impact performance at all. Slide pin is a super common issue once they wear out a little bit, you can dremmel into the little channel on the slide pin that the pusher in the frame hits, so that it sits further in the slide pin and it cant come out :)

@crimsononi_tv3989 11 ай бұрын

I have an issue with my emg sti tti 2011. Out of nowhere I had a problem where the hammer wouldn't go down and the trigger was useless and the only way it could fire was if i released the slide and then it would go full auto. I did the entire process of fixing the leaf spring, Then It came back. I did the entire process properly and now it only works for 2 trigger pulls and then is messed up again. Do you have any suggestions??

@Danny-G 11 ай бұрын

that sounds like the hammer/sear have fucked up and need replacing. 5KU and Guarder both have really nice cnc replacements, I would also do the valve knocker as well

@crimsononi_tv3989 11 ай бұрын

@@Danny-G alright thanks i kinda figured but I need a more experienced mind to help. I also have a completely fucked mag release. its literally broken in half lmao

@airsoftluke17 2 жыл бұрын

What’s the best holster for this?

@Danny-G 2 жыл бұрын

any ipsc holster will do buddy

@Tapirrr 2 жыл бұрын

Is this a gel blaster?

@Danny-G 2 жыл бұрын

Yes sir :)

@AdamHoy81 2 жыл бұрын

Top vid mate👍 I have an Army Armament R604 that could do with your special touch. I will DM your website with my details. Keep up the great work.

@Frambhueee 2 жыл бұрын

That outer barrel it's kind of fixed barrel?, It doesn't drop?

@Danny-G 2 жыл бұрын

it's still a standard tm spec outer barrel, it can move back slightly with the slide to drop properly.

@Frambhueee 2 жыл бұрын

@@Danny-G so any part are cross compatible (TM and MST2011)?

@Danny-G 2 жыл бұрын

@@Frambhueee indeedily :)

@turijdragonfly 5 ай бұрын

Salve complimenti per il video, purtroppo la mia asg ha qualche piccolo problema e vorrei cambiare un paio di pezzi :il nozzel come quello del tuo video (completo) e il sistema opup ,se fosse possibile completo di canna come la tua perché la mia originale è nera penso in alluminio non so quale e meglio....mi servirebbe il nome così posso vedere se riesco qui in Europa a trovarli però in non so i nomi se mi suggerisci qualcosa tu di non troppo costoso io ti ringrazio e mi iscriverò al tuo canale.. complimenti ancora per il bellissimo video🎉

@MotorFien Жыл бұрын

are the threads 12m or 11m? for the outer barrel

@Danny-G Жыл бұрын

i think it's actually a 14mm weirdo threading on it man. best bet is to get a nice gunsmith bros stainless one or something

@MotorFien Жыл бұрын

@@Danny-G it’s a 11m outer barrel.

@Danny-G Жыл бұрын

@@MotorFienwell now we know! I don't really fuck with flash hiders and stuff too much.

@AAwp6991 Жыл бұрын

@@MotorFien what does that mean? I’m looking at mine now and it’s thread is inside the barrel

@grimreaperscreed5938 2 жыл бұрын

My rebuilt and mod MSR shoots 45 mtrs and has 380 fps..

@Danny-G 2 жыл бұрын

nice man! this is running on green gas. i live on property and it shoots pretty dang far, i dont have a laser measure or anything for exact distance.

@mk23mod08 Жыл бұрын

Great vid!! looks like an Army grip on EMG frame? direct fit?

@Danny-G Жыл бұрын

ok so i sound like a crazy person and its not something you would notice until you teched a few but, this gun is 100% built with army armament parts. I dont know if emg outsourced to them but every piece of it is army armament without a doubt i would bet you my left nut.