Our last Video for 2023 with some latest news and full details of how to upgrade your EFHW Antenna. UK Ham Radio Nrew Website www.hamradiost... ZL3XDJ You tube Channel www.youtube.co...
Пікірлер: 122
@Alvin-we3mt6 ай бұрын
I've been a ham for nearly 35 years, and I still learn more from Peter's videos than any other source. He makes learning painless.
@rjy89607 ай бұрын
Also put a high value resistor across the series cap to prevent static buildup in the DC isolated length of wire. Happy Christmas, all.
@radiohamd34026 ай бұрын
Good precisions on harmonics corrections and capacitor necessary! Thanks
@watersstanton6 ай бұрын
You are welcome!
@dennisbauer33157 ай бұрын
Thank you Peter, another wonderful EFHW video, loved the music. A most pleasant Christmas to you, and family, and all your supporters, also. 73 from VK4JDJ
@watersstanton7 ай бұрын
Many thanks and Happy Christmas to you.
@se27027 ай бұрын
Very nice Mr. Waters. Good information presented in a pleasant and professional manner. Outro music was nice too!
@adyg6ad737 ай бұрын
I spoke to Brian last month on 20m SSB morning grey line. Just after 08:00 UTC. A lovely surprise to hear his call come back to my CQ 😊
@watersstanton7 ай бұрын
Yes I can imagine! He was on 40m CW again this morning, but only about 549.
@danielsteele75443 ай бұрын
Just love u PETER.THANKS FOR EVERYTHING..WE ARE THE SAME IN SO MANY WAYS.THE GREATEST GENERATION.KD9MSF LAKE STATION INDIANA USA.LOVE THE GREAT INSTRUCTION AND THE PIANO MUSIC.I REALLY LOVED THE SPY COVERAGE FROM WW2 AWHILE BACK.IM A RETIRED ELECTRICAL TECH WITH 44 YEARS SERVICE AND HAVE JUST NOW FOUND TIME TO ENJOY HAM RADIO. LIKE THE SPITFIRE PICTURE ON UR WALL,WE OWE THEM SO MUCH..
@watersstanton3 ай бұрын
Great to hear from you and thanks for your support. Yes the Spitfire is something special. 73 Peter.
@thomashardy99947 ай бұрын
I really enjoy these informative videos about wire antennas. I’ve been intending to erect a commercial EFHW 80 meter that I acquired a few months ago, but something has always prevented me going forward. Hopefully , I’ve gained enough knowledge to tackle this job with confidence and can understand the pitfalls. Thank you so much, and Merry Christmas.
@watersstanton7 ай бұрын
Go for it! Happy Christmas and thanks for your support.
@ErikTheVikingMechanic7 ай бұрын
Great website it works well :) EFHW 20m long sloper is my best antenna. All of EU is easy and the USA and Australia when conditions are good QRP 10W. 4m long counterpoise just hanging down side of the house
@watersstanton7 ай бұрын
Thanks for sharing. Sounds great.
@jonmcadams54017 ай бұрын
Thank you Peter! I've had success using a 71' stealth non resonant end fed sloper, 9:1 unun, 50' LMR 240 coax, common mode choke at transceiver on all HF bands including WARC bands for QRP & 100 watt SSB DX, & 80/40 SSB nets. Antenna tuner is needed on 160 - 40.
@watersstanton7 ай бұрын
Good stuff. Thanks for sharing. Happy Christmas. 73 Peter
@brian.79665 ай бұрын
I use a 40-meter antenna end-fed 49 to 1 transformer in my 36 feet of garden. I ended up feeding it at the bottom of the garden, swr was well within 1.5 and lower. I do use a counterpoise which runs along the fence. I also use a coil for 80 meters. again swr well within 1.5. I did try putting the transformer as suggested by Peter at the House end fitted just under the eves, but all I got from that was SWR off the scale on all bands and the noise level well above the normal. It works very well in fact, the best antenna for my situation. The transformer is just off the ground, runs up a 25-foot fibreglass pole then runs up to my main mast and then on the the main chimney stack. Thank you, Peter.
@watersstanton5 ай бұрын
Sounds a good installation. Can't think why you had the problem feeding from the house end. Did you install a line isolator at the transceiver end?
@brian.79664 ай бұрын
thank you for your reply, yes I did put an isolator at the transceiver end.@@watersstanton
@brucecollins72163 ай бұрын
@@brian.7966 But did you Earth ground the far opposite end?
@CamilleCullen-ow6qj4 ай бұрын
Great info, many thanks!!! Robert K5TPC
@M7XCB7 ай бұрын
I've made lots of different end fed half antennas all works very well I've not done the 36:1 yet I will make it after new year it will be very interesting see how it performed for me. It been pleasure watching your videos this year I've learned some off things as we never stop learning with ham radio. Have good Christmas Peter.
@watersstanton7 ай бұрын
And all the very best to you. Thanks for your support.
@mikesmith51397 ай бұрын
Thank you Peter. An excellent and very informative video. I love your musical performance at the end! Happy Christmas! Mike, M0MTJ
@watersstanton7 ай бұрын
Thanks Mike. Happy Christmas to you
@mikesmith51397 ай бұрын
Thanks again Peter. One more thing.....You briefly mentioned the Yaesu FT-710. I'd love to see more of your thoughts about this new transceiver. Perhaps over the festive break? ✨️ 😊 🎉
@darylnd7 ай бұрын
Highly informative, as always, Peter! I love your style. My challenge with the EFHW comes down to a question of where to string 67' of wire without getting in other people's way. I'm 100% portable because my QTH, both by its physical design and by its location in the city, is hopeless foe radio: blanketed by tall buildings, overhead power lines and other sources of interference everywhere. Most of the open space here in Silicon Valley is pretty popular and it can be hard to avoid the footpaths with the wire, but I do frequently chat with people who are curious about what I'm doing or who know what I'm doing. The 40-10 EFHW has been my sole HF antenna until now. I've just received the Hustler 20m and 40m Resonators, 54" mast, and a Tram triple magnet mount. I'll be testing them tomorrow, prior to a road trip on which I'll have several opportunities for POTA activations. Hustler advertise the mast itself as resonant on 6m. The EFHW will be in my kit, as well. Radio is the IC-705. Merry Christmas to you and yours! 73 de AE6DD, Daryl, California
@watersstanton7 ай бұрын
Hi Daryl, great to hear from you. Yes a big problem in cities. You can load an EFHW and I will try and prepare a video sometime in the future.
@billryland61997 ай бұрын
Don't live in a city.
@darylnd7 ай бұрын
@@billryland6199 That sums it up, doesn't it?
@derekvargason7 ай бұрын
I definitely need to learn the patience side of this hobby even though I’ve been having a blast. We get some high winds here in Alaska and before winter hit I took down my crude fan dipole to upgrade it and preserve it for next year. I’ve since gone to a chameleon endfed half wave they say is 160-10 but at only 125ish feet it’s really only an 80-10 witch suits me fine since I’m only a tech that it studying for general and extra. On this antenna I’ve set it up in a sloper going north to south, and a sloper the other direction south to north. Now I have all of the antenna at 35-30 feet in the air and still don’t get half the signals of my dipole at the same hight but ends sloping to the ground. None the less enjoy your videos and I’ve been having a fun time on 10m when it opens for me
@watersstanton7 ай бұрын
Antennas sometime defy logic. My dipole always outperforms my vertical . In the end, go for what works best for you! Thanks for your support. 73 Peter.
@user-rp4cw9jn3k7 ай бұрын
My fun starts just after Christmas Peter, 80ft long garden45 ft wide & a Clansman150ft wire aerial, we bought this house with a huge garden, my wife said this garden should satisfy your hobby and her gardening hobby in retirement, I have had success, with end fed's sitting on top of the fence, so experiments will take place that is assured, if this fails I have 16 forty foot high trees, stealth all the way, Thank you for the video's Merry Christmas to you & Yours 73 Paul
@watersstanton7 ай бұрын
What a great Christmas present!
@davem0udb7 ай бұрын
Another great video, Merry Christmas Peter
@watersstanton7 ай бұрын
Happily Christmas to you also
@charlieoscar097 ай бұрын
Thankyou for the video and all you did in 2023 for the community 😊
@watersstanton7 ай бұрын
You are very welcome.
@vlfreak7 ай бұрын
Another great and informative vid, peter! I run a EFHW for 40m in my yard at only ~6m or so in rough inverted L config, it works a treat for local and international contacts. Home shack is an FT 710AESS, which ive owned for just over 12 months now, a fantastic radio for beginner or advanced users, with plenty of features and latest technology at a reasonable cost I also run similar out portable, config depends on location and available facilitys, using an FT891 (another great unit!) Merry Xmas and happy New year from Downunder, Joel vk2moe
@Marty480347 ай бұрын
Love your vids. So much wisdom. Appreciated! (Love the planes on the wall too.)
@watersstanton7 ай бұрын
Many thanks. Happy Christmas.
@dennisjoiner37177 ай бұрын
Though I'm in the United States I sure enjoy your channel. I'd love to be able to pop into one of your stores. I assume you have more than one. I've gone back to a 9:1 End Fed so I can get on Top Band. On 80 meters it's almost as good as my 135' Doublet. Oh, the End Fed is 117' long in an Inverted V over a Maple Tree. Merry Christmas and thanks for your wisdom.
@watersstanton7 ай бұрын
Many thanks for sharing. Happy Christmas to you.
@presidentspilot7 ай бұрын
Thank you, Peter!! You are such a pleasure to watch and learn!! Always British 'CLASS' on display, here!! Have a GREAT Christmas, Sir!! I am looking forward to many more videos from you in the future!
@watersstanton7 ай бұрын
That is very kind of you. Have a great Christmas. 73 Peter.
@gogglet727 ай бұрын
Excellent video Peter. Very interesting information. Merry Christmas from m7dqo
@watersstanton7 ай бұрын
And also to you.
@clivedavies37 ай бұрын
merry christmas peter ive enjoyed watching all your videos and learnt a lot 73s from M7CLI
@watersstanton7 ай бұрын
Thanks, you too!. Happy Christmas.
@mi0lpo7 ай бұрын
Merry Christmas Peter
@watersstanton7 ай бұрын
And to you.
@blugoose867 ай бұрын
Happy Christmas to you and yours also. Thank you de KA9TII
@watersstanton7 ай бұрын
Happy holidays! Thanks for your support from across the Pond.
@blugoose867 ай бұрын
I really like the way it feels like I'm in the same room with you when you explain stuff to me. Thanks again.
@ianharling95697 ай бұрын
Home made L match and 160ft of wire is all I have ever used with a good ground and have worked the world. Merry Christmas and 73 Ian G7HFS/PA3IKH
@watersstanton7 ай бұрын
That’s true Ham Radio. Happy Christmas to you also.
@AlvinMcManus4 ай бұрын
I am using the 75' of coax as my counterpoise with a choke at the radio. Good SWR from 40-10. 17 is a little wonky though but still tunable with internal ATU on FT-710 and the G90.
@kc8wvg7 ай бұрын
Thanks again for another informative video, Peter. I hope you and your family have a Merry Christmas and a happy new year. KC8WVG 73'S
@watersstanton7 ай бұрын
Thanks, you too! Take care 73 Peter.
@jimdavis52307 ай бұрын
A half wave centre fed doublet cut for 80M and fed with ladder line is much simpler and works on all HF bands superbly. All you need is a 1 to 1 current balun or a balanced antenna tuner and away you go. No earth required and no RF in the shack.
@watersstanton7 ай бұрын
But you do need to buy an ATU and balanced linedangling down the middle of the garden. An EFHW has none of that and for portable operation can be run out in minutes. Horse for courses I guess.
@ratsstuff19527 ай бұрын
I have a 20m long Resonant EFHW from UK Antenna's and it works well - i have 81 countries for my DXCC so far. Feed end atops a 8m steel scaffold pole and the other a metre over the chimney on my house. Fed with 213 with 10 clip on ferrites. It is as good as my old 13m vert, 40m full wave loop and various mono band dipoles. SWR is good on 40, 20, 15 and 10m bands. I use a TS590 and, if i used a cheap 'Max' chinese atu i can work 17, 12 and 80m bands If, like me, the wife has finally had enough and you are limited to one, reasonably stealthy, hf antenna you could do a lot worse.
@watersstanton7 ай бұрын
Many thanks for sharing. Hap New Year.
@Steve-GM0HUU7 ай бұрын
👍Good video, thanks Peter.
@watersstanton7 ай бұрын
Glad you enjoyed it
@wildbill17 ай бұрын
With a 80m EFHW cut the wire in half and connect a capacitor of xxx value. the value will depend on where you want it resonant. i used a 270pf capacitor and it made it resonant around 3.900 ssb.your mileage may vary. thanks for the video pete.
@watersstanton7 ай бұрын
I have not trued the 80m version but the drawing from CQ magazine showed to cut the antenna at around 32% which would result in a different harmonic result. If your version works then great. All the best for Christmas.
@hamradiofun4537 ай бұрын
Great video Peter, I really appreciate you taking the time to give use some good information to chew on. 👍 I pray all the best for you and yours for the new year and a very merry Christmas.
@watersstanton7 ай бұрын
Many thanks for those nice wishes. And the same to you.
@radiotec766 ай бұрын
I’ve got an 80 meter end-fed half-wave crossing over the roof of my house and a homebrew 49:1 unun, not a kit, because I enjoy building my own gear.
@watersstanton6 ай бұрын
Great to hear.
@davidportch88377 ай бұрын
another really useful video Peter - I really appreciate all of your posts and learn all the time from them... Merry Christmas to you and the family...Dave G0KPZ
@watersstanton7 ай бұрын
Many thanks Dave. Happy Christmas to you.
@rfshortwaves97067 ай бұрын
Happy Christmas and New Year to you
@watersstanton7 ай бұрын
Happy new year
@Rubedo7777 ай бұрын
I’ve been away from ham radio for 25yrs + Re educating myself because it’s changed so much. Un Uns Baluns windings…. bursts my head, because I’m not clever but my mind asks…ok, put that here, an X, on the EFHW… and it works… ok, why does it work? How does it work? The maths has to be easy to follow and the explanation in English not Greek. Btw, antennas are my thing but the sciences are not… I’d like to understand but somethings don’t gel… practical science and engineering, then see IF it I works… if not, why not… fix it! I’ve been watching your channel for some time and enjoy the subjects also your presentation, I’ve learned a lot from watching… un uns baluns ….. I’ll just have to try harder. Believe it or not my call sign starts G0…. How did I pass the license exam ? sheer brute determination and desire back then. Thank you. 73
@watersstanton7 ай бұрын
Great to hear from you and welcome back. Thanks for your support. Happy Christmas.
@andyM7XTT7 ай бұрын
Great video peter 👍 hope you n family have a happy xmas n thanks for all your help and advice on your channel
@watersstanton7 ай бұрын
Many thanks Andy.
@maddog2223334 ай бұрын
The comment about how the location of the feed point of an end fed antenna with respect to the ground and other objects changing the impedance at the feed point and thus the type of unun needed, reminds us that there is no “one size fits all” in antenna construction.
@wshanney7 ай бұрын
The end fed half wave can also be considered the extreme case of an offset fed dipole. The actual transformer value only changes the amount of counterpoise a little. Merry Christmas from CA....W6QR
@watersstanton7 ай бұрын
Yes indeed. Have a great Christmas break and thanks for your input and support. 73 Peter.
@paulsengupta9717 ай бұрын
Yep, that's the way I look at it, a very off-centre fed dipole.
@redjohn200017 ай бұрын
Thanks for the video Peter you have nicely summed up the finer points of the EFHW antenna. I see some KZfaqrs experimenting with a core of a slightly different form factor to get increased efficiency. What are your thoughts on that? Also would it be possible to wind the transformer with tapping points to give access to the different ratios in one transformer?
@watersstanton7 ай бұрын
A switched option would require both primary and secondary changes. Could be problem with losses. Check MM0OPX channel for core performance. He has done a lortof work on this.
@redjohn200017 ай бұрын
I was thinking along the lines of a 8 to 1 unun taping of at 16, 15, 14, 13 turns on the winding to the antenna.
@paulsengupta9717 ай бұрын
@@redjohn20001 Yes, some people have done that, with different screw terminals at different taps. Colin (MM0OOX) reckons a 56:1 with the fat core is best for him.
@AlvinMcManus4 ай бұрын
I wouldn't mind winding my own except I have a tough time soldering the input to the SO239 without melting the insulation. What gauge wire do you recommend?
@RobertMacCready4 ай бұрын
Off Center Fed (OCF) antennas are very convenient and they allow multiple bands of operation with a simple wire antenna which is fed off center. Not sure why this OCF dipole is not in the discussion. Plus, you don't end up "zapping" all your little furry friends in the area of your antenna.
@donaldfriend84187 ай бұрын
I thoroughly enjoy your videos. Would love to make a contact with you one day. 73 de NY3Z
@watersstanton7 ай бұрын
It’s my pleasure. Nice call sign. Happy Christmas. 73 Peter.
@VeteranInThePhilippines-uy6uc7 ай бұрын
Do your fiberglass poles have carbon fiber in them ?
@watersstanton7 ай бұрын
I don’r have details of the compound. They are very strong and non-conductive .
@dougdaniels7 ай бұрын
Very interested in your comments on EFHWs as I have three, two at home and one for POTA. Is a line isolator the same as a choke?
@watersstanton7 ай бұрын
Yes it is.
@dougdaniels7 ай бұрын
@@watersstanton Thank you!
@Dan-567 ай бұрын
Merry Christmas Peter 🎄! As an operator who does a lot of portable work, mainly SSB with 5-20w, I’ve throughly enjoyed your videos on simple antennas and antenna theory. Looking forward to more in the new year. 73 de WD4DB
@watersstanton7 ай бұрын
Happy holidays! Many thanks. 73 Peter
@bodstrup6 ай бұрын
What is “Tap up 2 turns “ ?? Can you show a diagram please ?
@shanerorko80767 ай бұрын
Doesn't the counterpoise essentially act like a section of the half wave? Thus making it essentially an off centre dipole with a balun feed? Thanks. Shane VK1NME.
@watersstanton7 ай бұрын
No. Any change in feeder length or counterpoise added, has no effect on resonance. Thanks foe watching.
@ekbanjosworld49266 ай бұрын
Love your videos, their all excellent!!! Very well presented!!! Thanks, but no thanks! I don't celebrate the PAGAN holidays!!!
@watersstanton6 ай бұрын
Fair enough !
@KeepEvery1Guessing7 ай бұрын
Actually, if that core that you dropped only broke into a few big pieces (rather than shattering into dust), you can glue it back together, and probably not notice the difference. After all, it5 was just powder glued together in the first place.
@watersstanton7 ай бұрын
Yes you are right but unfortunately one of the pieces got thrown away in a clean up!
@brianfields44797 ай бұрын
Well we'll, you embarrass me hi .yes simple ants and the greyline can produce great contacts, exactly as we had. 73.
@watersstanton7 ай бұрын
73; Peter
@Andrew-bl2vo7 ай бұрын
Surprised to see lot's of 710's on the second hand market, what's? It's problems ?
@watersstanton7 ай бұрын
There is no problem as far as I know.
@billryland61997 ай бұрын
Just do not connect the primary and secondary together. Connect the counterpoise to the low end of the secondary winding. No more common mode current.
@watersstanton7 ай бұрын
Then it is no longer an EFHw, but a W3EDP. which in turn is an OCF.
@johnr62187 ай бұрын
1300 miles was where to where?
@watersstanton7 ай бұрын
Should be 13000!
@johnr62187 ай бұрын
@@watersstanton ahh much more impressive!
@redjohn200014 ай бұрын
Hi Peter. Using a capacitor to correct for the band slippage on an EFHW antenna. If you used coax as the capacitor and wired it length ways, that is the first part of the antenna wires to the centre of the coax and the remaining part of the antenna wires to the outer shield but at the other end of the coax effectively placing the coax in line and part of the antenna. Would this conceivably work?
@watersstanton4 ай бұрын
Yes in theory it should. Coax is a good way of inserting a capacitor. I have pondered this idea but it is something that needs to be tested as there would be interaction between overall length, length of coax and capacity needed. I guess a bit of cut and try. But it should work. Maybe I will try it sometime.
@radioguy195107 ай бұрын
Can you ship to Spain yet?
@watersstanton7 ай бұрын
As far as I Know we now can. I am working remotely at the moment and we are closed for Christmas. Send an email to Sales with what you are thinking of getting and they should get straight back to you.
@radioguy195107 ай бұрын
@@watersstanton Thank you.
@pieterdutoit96427 ай бұрын
Hi Peter, many thank on all it is very good and enjoyable, Pieter (zl1pdt) NZ