Enduro Racing Mini Bike Gets WICKED Upgrades!

Рет қаралды 315,327

Күн бұрын

Our modified Trailmaster MB200 mini bike with the Tillotson 225cc engine is one fast mini bike. Today we're modifying the mini bike further to get even faster lap times from it. We install the juggernaut torque converter driver, tires, upgraded rear shocks, and a 54 tooth rear sprocket and drop a shocking amount of time on the CarsandCameras Grand Prix. This mini bike is nearly ready for the Gambler 500 mini bike enduro race!
Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: bit.ly/3T8njaF
----------------GO POWER SPORTS PARTS IN TODAY'S VIDEO---------------
Juggernaut driver: bit.ly/381TEHs
HD rear shocks: bit.ly/3a8FTHU
Sprocket hub: bit.ly/34x9868
Tillotson 225: bit.ly/38VCvzv
MB200 mini bike: bit.ly/39X4Pmm
CALL FOR FUEL TANK AVAILABILITY
Go Power Sports: bit.ly/3QKyODE
NEW MERCH: www.cars-cameras.com/
Equipment we use: www.amazon.com/shop/carsandca...
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.

Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

Пікірлер: 702

@scrawnyalien866 4 жыл бұрын

It'd be so cool of you bought 2 identical minibikes and each go separate ways to build the bike however you want and then see whos bike is cooler and/or faster 😂

@509ryan 4 жыл бұрын

good idea, mini bike battles!

@snoahwa16ingram42 4 жыл бұрын

i can see red in markers

@Crispy_Cris2797 4 жыл бұрын

Yo budget bike build showdown!

@quoththeraven3985 3 жыл бұрын

You wanna break up the band Yoko? How about 'challenge a different youtube channel' ?

@CarsandCameras 4 жыл бұрын

Upvote this comment if you like the 360 cam!

@ryanbrown6857 4 жыл бұрын

“Baaa ba baaa ba baaaaaa” absolutely brilliant Ike 😂

@P8FPV 4 жыл бұрын

Please go back to the go pros the 360 cam makes everything look like warp speed

@ab_1587 4 жыл бұрын

These videos always make mondays and wedsnesday better!

@justinbridgewater8240 4 жыл бұрын

Like wise

@f5garage401 4 жыл бұрын

"almost dumped it man" new t-shirt

@NitroGuyJH 4 жыл бұрын

You guys need a laser lap timer or even one of those things that has a little rubber hose stretched across the start/finish line that starts and stops when the weight passes over the hose.

@johnmorgan1629 4 жыл бұрын

Isaac, going all Clarkson with the telling of the times. Just thought, you've got Isaac the tall one (Clarkson) John the smaller one (Hammond) You just need one more member (May Cpt. Slow) and you've got a clone of the popular long running TopGear line-up. The you can do team, individual challenges and everything.

@flavxer7345 4 жыл бұрын

For the right pay I'll be the old slow one....

@unclemuir 4 жыл бұрын

Charles.

@rickburnout666 4 жыл бұрын

I'll be captain not so Slow

@mcss327 4 жыл бұрын

I think you're on to something there! 👍

@johnmorgan1629 4 жыл бұрын

@@rickburnout666 My chance for a Spartacus moment: "No I'm Captain Slow."

@holdenrice9694 4 жыл бұрын

Ike reading off the speed times during Jon's first run @ 2:43 I died when he said One-o-nine, one-o-ten.

@owenmeadows5202 4 жыл бұрын

Man, that bike is gonna annihilate the gambler. And here I am trying to make my minibike able to pass tech... Oh and finish the race.

@samsvintageoutboards6847 4 жыл бұрын

YEAH BUDDY, I loved when Isaac almost dumped it🤣

@ervingoertzen7233 4 жыл бұрын

Just going to say, I worked as an ER hospital Orderly. I can’t count how many guys I seen come through ER after minibike/dirt bike mishaps while wearing shorts. Almost all of them had serious skin avulsion injuries. That’s where skin is torn from your body rolled up like a carpet. Serious hurt. Painful. Please guys, wear long pants .

@butchs.4239 4 жыл бұрын

I got a good taste of road rash with my first motorcycle, riding in shorts and a t shirt and had to lay it down when a car pulled out in front of me. I slid maybe 25 feet on the pavement and rashed my right leg from my calf all the way up to my butt cheek, and my right arm from mid forearm to mid upper arm. The following several days were miserable, I haven't been on a bike since without my riding gear.

@danielscarbrough4363 4 жыл бұрын

@@butchs.4239 A-hem...sounds rough and painful, sorry to hear.... yet was likely avoidable. Truth is...you laid it down because you don't know how to control your machine. A motorcycle stops much sooner if one applies BOTH BRAKES instead of just the rear brake, sliding out and hitting the road with your ass, the later is a noob move. No one "has to lay it down because---> a car pulled out or a deer jumped out"....it's just what noobs say to make their lack of skills and bad choice seem heroic or at least their excuse. I've heard your story so many times...OUCH...real riders KNOW better! (and so do you)

@butchs.4239 4 жыл бұрын

@@danielscarbrough4363 The bike lacked a working front brake. I'd dug it out of a junk pile and gotten it running, but just barely. If you go and watch the cross cart build video, my little CB125S would have been right at home with the ones J&I went digging through looking for a donor engine. Riding it with only the rear brake probably wasn't the smartest decision I ever made, but it sure beat walking everywhere. ;)

@paulcondie2520 4 жыл бұрын

Glad to see you guys stepping it up in the gear department!!! 👍

@80f250 4 жыл бұрын

The bent pole at finish line looks like a death spear waiting to kill someone who goes off track

@carmineredd1198 4 жыл бұрын

hope it does

@JackHawkinswrites 4 жыл бұрын

So happy to see your content pop up! Can't wait for the 'Beemer Build'

@reedwilliams3103 4 жыл бұрын

Ike: “1 o 9 , 1 o 10” haha. Great vid guys keep it up

@slamboy66 4 жыл бұрын

I do like the clear cover.

@CainSample 4 жыл бұрын

FYI a Harley sportster gas tank fits right on those mini bike frames 😜👍

@Friedrich-Wilhelm-1980 4 жыл бұрын

i seems like Isaac is the experienced one who is skilled and knowledgeable and john just runs the camera while trying to learn from him

@Surfzap63 3 жыл бұрын

If you go back and watch some of their old videos (they’ve been doing videos together for about 7 years), John and Isaac are quite complementary. Isaac was John’s car mechanic initially and that’s how they met. John makes no bones about having learned a ton about working on vehicles from Isaac. John is more technical with the editing and posting of videos. They’re an excellent team and should hit a million subscribers soon.

@robertmiller5735 4 жыл бұрын

John two wheel riding skill has increased fantastically. ! ! ! I am also grateful he is setting a good example for younger riders who might be learning to ride by wearing the body armor.It has been said over and over - and you can see it - that Issac has ridden dirt bikes for years. Comparing the way the two of you ride is very instructional for all new riders.

@mike11bangbang 4 жыл бұрын

Why does Isaac sound like hank hill😂

@jaratt85 4 жыл бұрын

he spent time in Texas growing up and it just fits his voice.

@mike11bangbang 4 жыл бұрын

J.A.Ratt85 it really does😂

@drewp9112 4 жыл бұрын

good thing he isnt in the propane business lol

@jamesglenn2006 4 жыл бұрын

We're gonna go ahead and run this one on propane, and put a bbq on the back. Lol

@a.j.sgarage9637 4 жыл бұрын

Dammit bobby

@blakekinsella2458 4 жыл бұрын

I find green hard to see im glad you guys care about youre viewers and it touches the heart real nice. It would be greatly appreciated if you used a darker colour

@matthysvdmerwe1107 4 жыл бұрын

Yeah do a 360 cam it will be rad

@liamz_3504 4 жыл бұрын

Love the vids instpired me to built my own version of a murry

@anthonypiligno7618 4 жыл бұрын

Thank you very much..... and I am so glad that you give up all the numbers Ford Edge speed.... differences torque whatever.......JJ....

@fredhenschel2517 4 жыл бұрын

Awesome guys !!! I’m totally digging this 👍🏻

@calebash4178 4 жыл бұрын

I love what you guys do they are so entertaining and inspirational and you can actually learn something from it and thank you for keeping up the great work I always look forward to watching keep up the good work on the vids

@mikl911 4 жыл бұрын

That bike looks like such a blast to ride!

@Lord_Verminaard 4 жыл бұрын

Damn that thing really rips, it needs a front brake for sure! Great work guys.

@ahwhat4830 4 жыл бұрын

🎊🎉Congrats on 800k!! 🎉🎊🎉 Keep up the awesome work!

@curtishill6490 4 жыл бұрын

The learning curve??? You mean ya didn't crash this time lol!! You two are awesome and fun to watch💯

@jordonc3379 4 жыл бұрын

I'm red/green colorblind and I can see and read everything you have there just fine :)

@mike11bangbang 4 жыл бұрын

Jordon C but what if you don’t know it’s there and you just think you see everything 🧐

@BuildingWithZach 4 жыл бұрын

Mike Bell woah

@mariosuper7920 4 жыл бұрын

Now I can buy the performance for the Tillitson 225 for Trailmaster mb200.

@rustybeatty6567 4 жыл бұрын

Mario Super the only thing I don’t like about the Tillotson 225 is they don’t offer a electric start version of it like they do for the Tillotson 212.

@fl350r 4 жыл бұрын

"The Juggernaut" Is a great name for this project!

@MrLendermanGaming 4 жыл бұрын

Ooooo the attic. Nice I was hoping you guys would use that room! I don't even know you guys and I'm proud of your new HQ. The content is already getting sicker and sicker. Best of luck y'all! Stay safe!

@jeepcollector91 4 жыл бұрын

You should do a little magnet fishing in that pond. Film it in case you find anything...

@miguelsanchez6465 4 жыл бұрын

Nice work guys I want to replicate that bike!! The tires on it now have massive grip compared to the old ones, especially in the wet. Amazing!

@jadenrisk729 4 жыл бұрын

"1 o' 10"

@23832 4 жыл бұрын

Jaden Risk I heard that to

@DetroitMicroSound 4 жыл бұрын

So happy to see the shop coming alive!!!!! Now you're going to need lapel mics each, for inside the shop. And, daaaaaaaang! That thing looks like it's quick off the line.

@jimciancio9005 4 жыл бұрын

Awesome video guy's love ya both, keep em comin out! Be careful out there and stay healthy guys!

@midwestmonsterhunter6034 4 жыл бұрын

I love this setup you guys are killing it. Fix the stutter and just letter eat

@travisking255 4 жыл бұрын

Love tha build! I'm Merging a db30 with a 1 foot stretch and a lifan 200 right now for a dirt drag mini. Referencing all y'all's videos for ideas and guidance. Great stuff.

@CPthetooladdict 4 жыл бұрын

I'm going to need a cars and cameras mb 200 right meow lol great video guys!!@

@paulvonrentzell5189 4 жыл бұрын

So much fun this video....something different. Back to besting your buddy

@PJsGarage34 4 жыл бұрын

Hey thank for all the years of showing us how to work on mini bikes. been watching you and thanks to you guys i build my first mini bike and never looked back thank you

@darylturner6094 4 жыл бұрын

Thanks for adding the close ups. Made me laugh

@justinbridgewater8240 4 жыл бұрын

The valves just did some floating around, and of course I will be watching for the next video my bike hauls but with a thirty-two tooth sproket set-up and I'm still working on the hyper drive system

@TheShepard5348 4 жыл бұрын

l'd work up a foot brake, l watched you holding on with 2 fingers to operate the brakes. Great job as always and keep on building on.

@michaelperkins9936 4 жыл бұрын

Black out the fenders and side plates to match the tank . Look so good! Nice job guys!

@rickygreen8532 4 жыл бұрын

Thanks for the videos keeps me sane

@tbidzzzz 4 жыл бұрын

Love the channel guys thanks for all the time and work keep it up... your crosskart with no exhaust was insane when Ike was doing doughnuts... so badass..

@discingaround 4 жыл бұрын

Dang that thing SCOOTS! Nice

@hawkeyepierce3199 4 жыл бұрын

Damn that runs good , I definitely need to build one for sure

@krgoodjohn 4 жыл бұрын

Loving that 360 cam footage !

@GavenErik2013 4 жыл бұрын

Congrats on the 800K subscribers! You guys are awesome!!

@troy9er 4 жыл бұрын

Nice, those were some nice improvements!!!👍🏻

@matthewpovey6668 4 жыл бұрын

Would love it see you two do the upgrades to the new shop

@VochoTalacha 4 жыл бұрын

I don't know how big that new place of yours is, but y'all should make a path or something so y'all can make top speed tests on the road karts and stuff

@christophergraham3618 Жыл бұрын

I think it is really awesome that you guys take the time to recognize people who may not be able to see the green you guys are just awesome thank you so much for the videos

@jrussell720 4 жыл бұрын

Good work fellas

@Dwayne7834 4 жыл бұрын

Quite a bit of improvement over the other engine. With some more tuning adjustments you might get a little more out of it. Thanks for sharing

@irvingcobian 4 жыл бұрын

i was like "how do you not see that bug on the white board?" it was actually a bug on my screen haha. that bike is badass i love it

@boogmost575 4 жыл бұрын

Love your content

@MrNosajwhitey 4 жыл бұрын

Please do that exhaust upgrade on camera and let's see if it helps power

@pricetag30 4 жыл бұрын

Who could possibly dislike this vid!!! Awesome job guys!Im hitting 48mph(level )and 59.9mph (downhill)on my stage 3 Clone Coleman ct200u,

@evanwolfe1153 4 жыл бұрын

Another good video guys, for Wednesday you guys should mention the three wheeler and try and get some mods and definitely more upgrades for it to make faster with all the power it already has

@dailydrift9804 4 жыл бұрын

just a random idea i’m sure everyone has thought of, but uh bring back to cross kart by turbocharging it? or supercharging it either works... i just want MORE CROSS KART

@stickgears 4 жыл бұрын

Yall have way too much fun

@That_Rotten_Egg 4 жыл бұрын

Keep up the good work! Love the new HQ!

@esesoke 4 жыл бұрын

I love all your builds guys im still catching up on videos .

@zanehopefz6hundred761 4 жыл бұрын

Dang... It really sounds nice!!

@v8power561 4 жыл бұрын

That thing rips!

@markpwebb 3 жыл бұрын

I like this one... it looks like something I would have lusted after back in my day (1970 for this type of mini)!

@jtvjr316 4 жыл бұрын

I'm digging the new shop, looks comfy.

@soupsoundsstudios5220 4 жыл бұрын

I'd like to see you guys restore or rebuild a full size big wheel off road bike. Maybe like an 80s Yamaha big wheel 350 or the Honda fat cat 350? These have been extremely hard to find recently. I've had one in the past and they are very comfortable because you set up so high. Maybe you could even build one from scratch? Anyway it be nice to see you guys on a bike that you don't have your knees in your chest lol. Keep up the great content anyway 😉

@MetalJoe0609 4 жыл бұрын

This is looking a lot better than the last time I recall you guys getting a new headquarters. That shed was pretty nasty.

@eskim0396 4 жыл бұрын

Nitrous!!! Might give you the edge at the race for climbing hills....

@gabesmith654 4 жыл бұрын

Great job John!! That bike is bad A guys nicely done to both of you

@danmay9728 4 жыл бұрын

Cool ride guys. Be safe. Peace.🇺🇸

@Presy_P 4 жыл бұрын

Great video. I for one like the wide angle lense.

@bwxmoto 4 жыл бұрын

KENDA Scorpions.. Yup! those are nice.

@toolshedjunky 4 жыл бұрын

Great video guys. Cool bike too.

@kristdielaletriz6583 4 жыл бұрын

You guy very talented keep up the good work

@sweeneysweeney1901 4 жыл бұрын

The gas tank looks wicked. Sweet build

@ervingoertzen7233 4 жыл бұрын

I like that bike with the upgrades !

@glenpiro313 4 жыл бұрын

The dueling red and blue claw hammers at 6:15 ish, oh my god ya gotta love it

@deathstar562 3 жыл бұрын

JUGGERNAUT!!!!! im getting mines this monday the shity 30 series was getting torque shudder. cheerz!

@mrrooter601 4 жыл бұрын

nice

@jamesglenn2006 4 жыл бұрын

That clutch and gearing made a big difference 👍

@007Moron 4 жыл бұрын

Okay, THAT was a lot of work that you guys squished into this very entertaining vid. GREAT job guys! Love the bike. I'm jealous. :)

@joekingrey1423 4 жыл бұрын

There is a process called "extrude honing". I had an 86 5.0 that they did the upper and lower fuel injection intakes and a set of equal length headers. It's a pretty kool process. They force an abrasive putty like stuff through the ports. Does an awesome job.

@k1e1v1i1n 4 жыл бұрын

Love watching you guys and I want to keep watching so get some more protective gear. boots, pants you guys are going pretty fast offroad. its all fun and games till you fall bad. but keep up the great work these videos are amazing I would love to see more about whats going to happen to the new shop.

@richsmith9063 4 жыл бұрын

That is one fast mini bike !

@crazyshots3586 4 жыл бұрын

Bruh this is the coolest thing ever

@markhuston6816 4 жыл бұрын

Some front springage or shockability. Yes man. Cool as a cast iron bike seat in the Klondike. Good stuff man. Maybe Ike's bro may get a front springage or shockability so you don't starilize yuns all on the long ride.

@OddBallPerformance 4 жыл бұрын

Put some grip material on the tank sides so you guys can stand on the pegs and keep your knees clamped to the tank for better control.

@camden8937 4 жыл бұрын

any tips on helping with engine vibration on a mini bike ? got a brand new predator 212 on a coleman ct200u and the thing shakes like hell and idle , need some advice from the people who know best