I was able to do it. A lot of other videos are bad quality or unclear. Thanks a lot!

I always prefer to understand what a im doing before doing instead of just adding a CFW to add speed. Great Tutorial and great explanation! Makes me feel more secure on the scooter life after doing this CFW. Reached 35 km/h with very powerful acceleration. You will have so much fun, i promisse you that! I don't think you will feel safe if more fast than this :D

a lot of stuff changed in the mean time .. could .. you help us with an update? I've made a lot more decisions than I'm comfortable with when going through this in mid2021

Will this tutorial apply for pro 2? Is there another guide for it ?

Hello.I did all the steps,I installed it to my Pro,but the max speed in sport mode is 35,not 38 as I wrote to the option about speed in sport mode.why?

The site is currently down! They just have a video that says will be back

M365 or M365 Pro does not exceed 17mph without load when set to 35kmh (20mph) but Gonka155 firmware for pro max speed is 21mph so it should reach 20 easily.

Thank you so much! Will try this out as soon as possible. Now to try and figure out what app to flash with 🤔

Hi friend! Tell if I can do custom firmware when my scooter is now v. 1.7.1? Should I first downgrade ble for 1.5.5? Didn't really see tutorials for 1.7.1( Copy, Paste). 1.7.1 work with downG , without use zip code

Why isn't there wheel speed multiplier for 10 inch wheels for M365 Pro?

Hey guys do u know how ill do this for a pure air 2nd gen e scooter

it work with the 1s??

does this apply to the pro 2 aswell?

Hello! i have downgraded my 365 pro to ble090 and since then i couldnt connect my scooter to the mi app. how can i restore it to original firmware? thank you

thanks for video ,but i have small problem :) installed custom firmware increased max speed 36 in sport mode ,in drive mode 26 and eko mode 21. When i use eko mode max speed 30-31 the same is in D mode and S mode .What wrong ?

I’ve tried doing the full speed method and now this Custom method. It didn’t work. What worked was the push to engage motor I did 0.1. But the top speed didn’t increase. Can you help me out thanks

Hi there i m having an interesting issue after flashing . All mode speeds are 35, no short beep on cruise i did the same as you did. I tried with and without russian algo throttle but no luck can you say is yours same in this situation

Thanks! Is there a way to prevent M365 Pro to reduce speed at higher battery charges. For example, my Pro when it’s full or at 80-85% battery goes 33-34km/h but when the charge drops at 65-60% it goes 31/32km/h max? 👍

Salut salut DuelMan. En installant le firmware poir debrider à 36 en ayant une recup sur moyenne je sens parfois une baisse de puissance et une reprise est ce normal ?

i'm scaring to cut my scooter from being 'updated' they are fixing something that i don't know right? so let them work but i also want my motor start at 2 km/h and want to set my cruise control to 2 secs. just two. Do i still need downgrade? is there no way out for me?

Does anybody know what the presents do in scooterhacking.com for the M365 Pro 2?

Hii,need your opinion. I have mi scooter pro,i use cfw,peak got max 900w,24Amps and max speed 32kmh vs stock firmware max 800w peak,22Amps and 27kmh.Is it safe?chances to break something? Im light weight...Thanx

Hi! I have a m365 classic, but I installed a dashboard from the pro version. What cfw settings shoud I use?

Hi, great video. But when I go on the scooterhacking.org site I see a completely different lay out? How can I get the layout you show on this video? If it's now changed for good, can you do an updated video on the new layout please. Many thanks. Really appreciate your time & work. 🖒

Can I use this method on a standard 365 where I have upgraded the screen with the pro model (when connected is seen as a 365 pro) or it might be dangerous for the motor/battery?

Pro 2?

Hi friend! Tell if I can do custom firmware when my scooter is now v. 1.7.1? Should I first downgrade ble for 1.5.5? Didn't really see tutorials for 1.7.1

when i open bin it tells me that i have m365 and i am trying to flash m365 pro firmware and maybe it will be bricked ( i have m365 classic with pro dashboard)

thank you i got my pro 2 going 33 km

i can not find the video how to flash the new firmware onto my scooter...

Thank you!do you know if it is possible to do this with the Xiaomi essential?

Mais aide nous avoir la même en France vite svp

New subs sir.. Do you have the stock FW of mi pro 2 BMS 128 sir? Thank you

1.7.1 work with downG , without use zip code

Le même en français 🤣