Engraving leather on the Lasermatic MK2

Рет қаралды 5,543

5 ай бұрын

I took on a job that I probably should have passed on. No guts, no glory right? Finding settings for the MK2 to do the job. Using the jig panel makes the process less challenging.
For templates that I have made, check out my Etsy shop. I build files for projects and tools for laser engravers.
theclackshack.etsy.com
For Clack Shack shirts, check out my store:
the-clack-shack.creator-sprin...
The links below are affiliate links that will direct you to the product in this video. If you use this link for a purchase, I will receive a commission from the purchase. I remain unbiased and honest in my assessment as always.
The Clack Shack on Amazon= www.amazon.com/shop/theclacks...
Roly MK2- rolyautomation.com/mowbtv
Chuck rotary- rolyautomation.com/xzvhq7
Jig table- rolyautomation.com/72hhiw
‪@rolyautomation‬

Пікірлер: 52

@jf5336 5 ай бұрын

I just got my LaserMatic Mk2, based on your review and comments. Have never used a laser engraver/cutter before, so I am pretty stoked to start this adventure. Thanks for everything you do.

@TheClackShack 5 ай бұрын

Learn lightburn and start out with easy projects. It won't take long. Enjoy

@TheExtremeElementz 5 күн бұрын

@jf5336 how’s the laser coming along? Thinking about picking up an MK2 myself.

@terrydriskel9731 Ай бұрын

Fantastic Clack. Well done

@TheClackShack Ай бұрын

Thank you kindly

@JaniLewisPaperCompulsions 5 ай бұрын

Looks very nice. It is actually good to see that even experienced laser cutters get nervous with projects that are unpredictable. I am new to this so I get nervous every time I try out a new material. 😅

@TheClackShack 5 ай бұрын

I felt pretty good about getting acceptable results. I would have preferred having a tester but wasn’t an option. Thanks

@brianbell2101 Ай бұрын

Looks pretty good…I’m just getting started with the Laser Matic MK 2, 30w.

@TheClackShack Ай бұрын

It is a fun machine. It works well.

@nipajhaveri434 5 ай бұрын

Turned out just fine. Looks great.

@TheClackShack 5 ай бұрын

I really wish the leather was lighter

@larrystaas1940 5 ай бұрын

Great job, thanks for sharing. Just received my MK2 and this adds to future projects.

@TheClackShack 5 ай бұрын

Have fun

@trinafry1052 5 ай бұрын

Looks great! Congrats!

@TheClackShack 5 ай бұрын

Thanks

@sicciful 5 ай бұрын

you have done a wonderful job with the roly MK2 just keep it up

@TheClackShack 5 ай бұрын

Thanks

@gregwilsonnaturephotography 5 ай бұрын

It looks fantastic! He should be giving you a raise! Greg

@TheClackShack 5 ай бұрын

Not likely, thanks

@aliasmeum 4 ай бұрын

Thank you for your videos on the Roly. I would really like to see a 20w and 30w engraving comparison on 10w modes. Some small text would be interesting. I am about to order mine now, but I have not decided on bying the 20w or the 30w module.

@TheClackShack 4 ай бұрын

I only have the 10-30 watt. Maybe LAHobby guy

@budgetmerch 5 ай бұрын

Can't possibly fire you for that; it looks really good. 👍

@TheClackShack 5 ай бұрын

I got to keep my job…. Lol

@louvp57 5 ай бұрын

great job, i would have been very nervous about screwing it up

@TheClackShack 5 ай бұрын

I have messed up so much stuff you get used to it.

@naterife8871 5 ай бұрын

Nice! I had a cutting board give me fits the other day. Had to use the eraser (planer) twice. Found out the file, which was text I typed out in LIGHTBURN just would not work right. Thought my D1 Pro lost it's mind. Change projects and everything was ok? Have a great day.

@TheClackShack 5 ай бұрын

It happens…

@jeremymiddleton3481 5 ай бұрын

How about a shop tour se we can see the differeent machines you have and how they are setup for exhaust and so forth. Thank you.

@TheClackShack 5 ай бұрын

I have most of that info but it is in numerous videos. May have to put something together.

@beckysani7630 5 ай бұрын

Thanks for doing this with us. It was nice to see your process. What watt did you use 10w or 30w. How do you chose which option to use?

@TheClackShack 5 ай бұрын

The 30, I only use the 10 if needing finer detail

@beckysani7630 5 ай бұрын

Good to know thanks you for the info

@stevedue4485 5 ай бұрын

Have you reviewed the IKier K1 Pro: 24W ? I have 3 lasers already, the only diode i have is the xtool f1, it has good definition on slate but need to be able to do bigger pieces of slate,and that is what i am looking for for this laser, I was thinking 20 Watt, S1 20 W is too much money imo when you can get something like the Ikier k1 pro. Thoughts?

@TheClackShack 5 ай бұрын

No, Steve has. The machine is very similar to the Atzer L24.

@beardedlocoswoodworks 14 күн бұрын

Great video every time. So what machine do you recommend from this one, the genmitsu gen L8 or we create in the 20 watt thanks

@TheClackShack 14 күн бұрын

It depends on how comfortable you are with lightburn. The L8 is probably as good as the original 20 watt wecreat.

@beardedlocoswoodworks 14 күн бұрын

@@TheClackShack what about between roli mk2 vs gen l8 ?

@TheClackShack 14 күн бұрын

@@beardedlocoswoodworks they are similar machines but in my opinion, the Roly is constructed better. It also comes in a 30 watt. For tumblers, the Roly is a winner

@beardedlocoswoodworks 13 күн бұрын

@@TheClackShackthank you sir. This helps a lot.

@martymeunier4862 5 ай бұрын

Can i ask what your favorite diode laser is and what brand do you recommend ? i currently hace an olm3.

@TheClackShack 4 ай бұрын

I don't have a "favorite" technically. I like using the right machine for the job. It depends on what the job is, which machine I chose to use. Figure out what you want to do with it and pick based on the required options. Budget also is a big consideration. The machine that I like for one job may not be my pick for the next. They all have strengths and weaknesses.

@joshuakaraffa8184 Күн бұрын

Hey do you or would you use a small dry paint brush to brush the soot away instead of compressed air. Or do you avoid doing that especially with leather.

@TheClackShack Күн бұрын

You could, I use compressed air. Less smearing

@bigcountry734 Ай бұрын

If cutting out a project, or engraving and I move the project but need to put back in the work area to fix or change something. how do I get everything back in the same position to start again

@TheClackShack Ай бұрын

I responded to your email. If you didn’t jig or index it, it’s gonna be tough and risky. Assuming you saved the file, if you didn’t save the file, it will add another level of difficulty.

@6creeder688 5 ай бұрын

It’s crazy how lasers differ in settings I run the new omtech 10w on leather every day @ 9000mm a min at 40power and it leaves a perfect engraving

@6creeder688 5 ай бұрын

And your not but 3hrs away from me lol, I got to red level Alabama often to shoot PRS tournaments

@TheClackShack 5 ай бұрын

Yea, I have to go much faster with the 30 watt or turn the heat way. Down. I would have been happier doing a full speed test but couldn’t on this job.