No video
Enjoy Today, Compound Cut, Scroll Saw Word Art
Рет қаралды 17,641
Күн бұрынHey everyone! In this scroll saw project video, we make some beautiful Compound Cut Word Art that says "Enjoy Today" This Steve Good Design shows that a scroll saw can not only do 2 dimensional projects but, can also do very unique 3D designs! Hope you all like the video and I hope you all Enjoy Today and Everyday!
The pattern was designed by Steve Good and is avaliable as a FREE pattern download at his website;
- scrollsawworks...
Remember, If I Can Make It Or Do It So Can You !
Please continue to Like, Share, and Subscribe to my Channel to see all future uploads !
God Bless !
Music in this project video is from the KZfaq Audio Library.
Contact Me At These Links;
Mailing Address;
Artisan Pirate
1015 Dixie Street
Burlington, NC 27217
- E-Mail; artisanpirate@gmail.com
- Instagram; / artisanpirate
- Twitter; / artisan_pirate
- Also, contact me through Social Media if you would like to Sticker Swap !
#ArtisanPirate
@wattana6982 8 ай бұрын
มีความสุข กับงานที่ทำ.."today enjoy"
@jeffboe357 4 ай бұрын
Dang you made that look easy 👍
@ArtisanPirate 4 ай бұрын
Thanks!
@DirkOgier Жыл бұрын
Thanks a lot. You are a very positive person. I will try this. Enjoy Today!
@ArtisanPirate Жыл бұрын
Thanks so much! I truly appreciate it!
@SculptyWorks Жыл бұрын
Wow, that is really cool! 👍👍❤❤
@ArtisanPirate Жыл бұрын
Thank you! Cheers!
@hassanal-mosawi4235 Жыл бұрын
it is fun to watch, thanks for sharing those tips and the make!
@ArtisanPirate Жыл бұрын
Glad you enjoyed it!
@paulphillips1848 4 ай бұрын
looks awesome
@ArtisanPirate 4 ай бұрын
Thanks!
@bhazen5510 Жыл бұрын
Super job bringing that to life! Thanks for sharing this idea.
@ArtisanPirate Жыл бұрын
Your Welcome!
@MartyRaaymakers Жыл бұрын
Looks great.
@ArtisanPirate Жыл бұрын
Thank You!
@richardbodine7256 10 ай бұрын
❤ your videos.
@ArtisanPirate 10 ай бұрын
Thank You!
@woodsytalks Жыл бұрын
As always, impressive work!
@ArtisanPirate Жыл бұрын
Thank you! Cheers!
@davenewkirk1642 Жыл бұрын
Great project. I am going to try that. Thank you
@ArtisanPirate Жыл бұрын
Thank You!
@charliearmstrong8938 Жыл бұрын
Love it. I like the sanding sticks. I have been using a pencil wrapped in sandpaper to get what I could and. Those look small enough to get anywhere I would need.
@ArtisanPirate Жыл бұрын
They were sent to me by a subscriber and have been an amazing asset to my sanding. I have now seen them in hobby stores or craft stores near the Model Car section
@chrisrolofson8005 Жыл бұрын
Oh sanding sticks. Didn't know those existed.
@ArtisanPirate Жыл бұрын
Yes. They are really ment for model kits and all but work great in Woodworking
@brieun Жыл бұрын
Nice job
@ArtisanPirate Жыл бұрын
Thank You!
@michaelmarchione3408 Жыл бұрын
I've tried this and failed miserably! I tried it with a #5 and with a #7. Not having a table saw, I purchased wood surfaced 4 sides. I checked them for square...they were perfect! The patterns I had were very simplistic Christmas Ornaments. I like your technique! I'll have to try again. Thanks and take care!
@ArtisanPirate Жыл бұрын
It sounds like your blade selection, a thinner blade can drift in the material and cause it not to line up, you need the beefier blade so you know it's not "drifting or bending" while cutting. also this is a very, very slow cut
@codrutbila9674 4 ай бұрын
Nice peace of work. Any idea which font is that? Just for creating personalised texts, instead of using the template Steve shares. Thanks
@ArtisanPirate 4 ай бұрын
Not sure of the font, Steve uses it for these "Word Art" pieces he designs, maybe try sending him an email
@JohnColgan. 10 ай бұрын
Im not good enough to try this on a scroll saw, just about qualified to break blades. However, I'm trying it on CNC,half way through 1st prototype as a 3D relief carve. The letters will still be level with edge, but it's the inspiration I was doing. Sides 3 & 4 might still be readable not reversed if 8 can merge them all at corners
@ArtisanPirate 9 ай бұрын
Sounds like it will work! I hope to see the finished result when you get it done
@unlimitedj06 Жыл бұрын
👏🏼👏🏼👏🏼👏🏼👏🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼
@Bay444444 8 ай бұрын
Can you post the “Love Wood” pattern - both look great.
@ArtisanPirate 8 ай бұрын
It's a free Steve Good design
@fishman8662 5 ай бұрын
So cool. question is how you would be able to do a name like Amilia Grace. or doesn't it matter that there isn't the same amount of letters?
@ArtisanPirate 5 ай бұрын
Thanks, and these are pre made designs that I used, I don't know how it would work with different length names
@FrugalPCOG Жыл бұрын
can you use any word as long as the two words are the same number of letters?
@ArtisanPirate Жыл бұрын
Not Entirely sure, these are pre made Steve Good designs and I have never made one of these patterns to try on my own
@mandydrew3024 Жыл бұрын
Hey when you do compound cutting , what kind of wood do you use and what size blade ? I did some compound cutting tonight and I feel like I worked myself to death.. thank you for any information.. Mandy
@ArtisanPirate Жыл бұрын
As I state in the video, I use a number 10 or 12 size blade for this type of compound cutting
@abegawthrop8299 11 ай бұрын
Where, or how do you get your patterns?
@ArtisanPirate 7 ай бұрын
As I stated in the description, its a Steve Good design
Friendeez
Рет қаралды 17 МЛН
Кушать Хочу
Рет қаралды 6 МЛН
Ken Spencer “KnR Creative woodworks “
Рет қаралды 33 М.
Osman SADIÇ
Рет қаралды 45 М.