this thing is gonna be crazy!! 203 here we come!!

Raz - the machining and workmanship is absolutely top-notch! You are probably learning so much from this type of extreme build that many 'makers' would never get the experience to learn because of the sheer problems surrounding the power transfer alone. That doesn't even account for trying to keep everything inside of the car's footprint and map out where the parts need to go to make it work. Bravo on an amazing build.

Top noch build as usual, but man, editing is at the same level if not better. The first part of the video and the conversation with the machinist is awesome 😝😝😝, you made my day. Keep pushing Raz!

Thermal expansion on the gears could be a problem, looks like custom one piece pinions joining the two motors on each side would be an alternative. Good work Raz!

Wow, so satisfying to hear the gear mesh. Beautiful work as always Raz!!!

Everything You Need Is Here.. www.perfectpassrc.com/

Excellent video. This build looks amazing! Thank you for taking us along on the journey!

Always taking it to the next level Raz, this is awesome! I’m sure this put a smile on your face when everything fitted so neatly, with such fine tolerances 👏👏👏👏

Your explanations are great. Im not a newbie, but for those that are, you make it about as simple as you can for such a complicated setup.

As a child/teenager I was really into RC cars (still am) and I always dreamt of a custom build like this - thank you for sharing!

love the milling, drilling, cutting everything🔝 very clean build wow🤘 gogogo🏁

That was pretty cool. I was a machinist when I was younger, so that's all very familiar to me. Ughughughugh! Looking forward to more of this car. Wonderful parts from Scorched btw. I reckon that you might have problems with that set up, the pinions and shaft gear. Happy to be wrong though.

Man you do the most epic builds Raz. I’ve just done my first scorched infraction chassis , Raz carbon shafts , all the other carbon goodies and it’s all thanks to you and some of your tutorials vids. Thanks heaps.

Omg😮😯 those scorched RC parts look absolutely beautiful. I have lots of questions about this already but I don't want to bother you too much with them. This is exciting, can't wait to see the next video. ❤️ Sending you love from France 🇫🇷

Really really impressive, I have to think the middle drive gear is going to get beat on pretty badly. Having some form of mechanical slip clutch in that center gear may save it and still transfer the power.

Everyone is speculating about what is going to fail in the drivetrain. I am confident Raz will find the weak link on the first outing. Keep pushing the limits, it’s what makes the hobby so much fun.

driving down the road and never let your eyes off the gears, some priceless video. that editing was gold. oh yeah, I got a question. I know this sounds a bit excessive, but, are you going to clock those motors, so they're exactly in phase, considering that they're hard locked to each other (no clutches, slippers, etc.)?

Looks good but I have doubts. Those gears will be stripped due to the power and the tiny area of contact. Personally I would turn around the motors and use 2 spools this will give you 4 times the surface area for the pinions and much less stress on the now doubled spool gears. Hope it works out for you, all the best.

Ok I was not expecting the way the motors meshed to the drivetrain to be like this….. what an absolute unit

Im looking at this already and chassis flex will be changing your mesh dynamically. I would say put another carbon plate to stiffen everything above the motors as well, like a brace. It will help immensely

Wow I hope spool don’t explode under load. This is insane!!!! Thanks for sharing all the great content and creative engineering.

The music at the beginning is awesome and suits the video completely. Celebrate the quadness and the machining of the pinions on some classic machines.

This video was amazing raz I can’t wait to see these new builds on the runway

I came here for the RC car video, but I can't help but notice how awesome your home is!

Amazing. Being rather new to the hobby, I love to get a clear sound of other peeps gear mesh. Strange but it helps lol 👍👍👍

Your editing is getting insane 😎 Once again. Elegance applause 👏

Raz this is the best channel on KZfaq by far IMO!! and this is the kind of stuff the rc world needs!!! Super EP Raz!!! Keep it up!!

The sound of success! Amazing build

This build is epic! It even has more horsepower than my car!

Omg! Amazing build as expected ;-) can’t wait to see more!

Awesome as always brother!!! Cant wait to see her finished up!!!!

Absolutely epic! Keep up the great work

My goodness raz. 😮😮😮. that is an absolute insane, wicked build. can’t wait to see the video on the speed run. 👍🏼🚗

That is some gorgeous craftsmanship right there. Absolutely beautiful

Sheesh! That thing is nuts! Excited to see it run!

Your videos keep getting better and better it’s great

Can’t wait to see how this turns out!

I haven’t even watched 1/4th of the video but the intro I already love it

Can't wait for this amazing build to fire up.

I completely lost it when he started exercising! 😂 This is awesome!

The machine shop is always epic. You build awesome toys Mr. Shifrin 🏆🎥🤝🤙

Did you wake up from a dream one day and say you want a quad motor limitless? Epic build man

Epic intro. That machinist is a hero!

I like how your videos are like a motion picture production! Awesome!

awesome cant wait to see it run

Badass guy right there :) Machining well is definitely a super power!

OMG, the drama and tension!! Haha, I love it!!

Love it ! Absolutely epic build

Champ is here! Keep it up!

Lov that content!

Super intro man! 😍! Let’s see this happen!

מדהים!!

The more the better 🤣 I like this idea.

This is awesome man 👍

That's more power than some road cars. I'm genuinely impressed.

Great project" very well engineered, I think I'll get back into RC one day when I have time..

Mega video this time, well done! Looking forward to see her performing.

Lovely!

It looks very very nice 👍🏻 really pretty thing! Merry Christmas Dude🎄

Raz it is one epic build! Awesomeness 👊🏻👊🏻👊🏻

RAZ YOUR SOO COOL !! YOU SHARE YOUR WORK YOUR ACHIEVEMENTS WITH THE WORLD . YOUR A LEGEND !!!!

You have the cleanest builds ever

Greetings from Northern MN 🥶! Awesome bro, top shelf!!!

Man that’s awesome but I don’t think them pinions will handle the power of them motors great video and love what you do keep it up can’t wait to see this beast running

LOVE your instuction videos !!!😉😉👍👍I have some rc cars and love them...but don't know alot about the things you are doing 😲😲...but... with your instuctions i really understand alot more about keeping my cars running great...!!!👍👍 "GREAT VIDEOS THANKS FOR YOUR TIME ...AWESOME...!!!🙏🙏😉😉

I am more interested in a tour of this gorgeous apartment. Amazing design…oh yeah, good RC work ;)

I like the wall paper, it's gorgeous

Great work, keep it up.

This puts a new perspective on an all motor car

I just wanted to add that your mechanical skills are excellent and the car looks awesome. But my comments below about the motors still stands.

That’s sick

Absolutely crazy brother!!!!

Man This Monster is gonna be amazing~!

Hi Raz, genius idea man, really liking your engineer 👷‍♀️, he’s a funny 😆 guy.

Awesome! Better hurry! I'll be hitting 205 next summer 😉

Recently subbed. Love ur vids

Brutalesch!

Have you ever thought of turning the motors around and using 2 Pinocchio Spools to run directly to the gearbox

Super awesome 👏

You and that old guy are amazing

I dont even have an RC..... One day...... Butni love watching your builds

I'm probably a little behind on your channel but I will catch up, anyway the car looks very nice, very clean & neat...👍👍

Your pinion is as big as my spurgear . Crazy build.

Belongs in one of those museum display cases!!

Interesting design. Very curious if you will get shaft harmonic issues, maybe a 2 piece design with unequal lengths to mitigate if so?

Man I have been waiting for this vid and can’t wait for the running vid as well. You are truly a genius and a leader in the rc world. Everyone else is just a follower.💯

The intro is epic.

I love that Phantasialand-Music👍😂

What a beast

So cool 👍👍

Yow Raz, really kool shavings! If Saga could see u now!🤣🤣🤣

Nice work 👍

Gooodayum !!!!! This thing will fly !!!

It would be awsome to see it work!

Sickkkkkkk🔥🔥🔥🔥😎

Man! the intro 😆 your so funny

Raz it's just absolutely crazy what you want to build there

I've never seen 4 motors to one pinion. Really curious to see how this works. Usually KISS is the way to go (keep it simple stupid) using 2 bigger motors ... blah blah. But its definitely cool to try new things, and can't wait to see what happens

This is a really cool build for bragging rights but that thing isnt anywhere near 60HP. At best The quad motors are putting out somewhere between 35-40HP collectively. Thats assuming that each of those 1650kV motors on 8S consumes somewhere in the neighborhood of 6500-7500 watts each. Castle doesn't tell us the wattage ratings on their motors but a Hobbywing 1650kV on 6S is rated at 5700W. The really big TPPower motors can get up to around 9000W each so going somewhere in the middle of that (which I think is being a bit generous) at 7500W is only about 40HP. If you calculate for 7000W each then you end up at about 37.5HP total. Once you start taking other factors in to account like voltage sag, efficiency, etc youre probably looking at something closer to 30HP for all 4 motors combined. Id like to know how you arrived at 60HP.

ahh, carbon fiber, precision cut billet aluminum, 15 horsepower green anodized beasts arranged face to face, yeah I just subbed. I'm in love.💥🤯💥💯💯💯