EP. 24 Guess the Trade RELOAD

Рет қаралды 1,555

Күн бұрын

This is Episode 24 of Guess the Trade? What I mean by that is... What does this Subscriber "Primarily" do with the tools in their bag?
This is a different type of Episode in the series, it is a Re-Load. These loadouts are Subscribers that were previously in the series which means we already "know their trade", but they have a new setup, new bag, new something to share.
This Episode contains a a Reloads from:
‪@robholland5925‬ His First Loadout can be seen in Episode 1 - • EP. 01 Guess the Trade...
‪@MattHmm-rq6dn‬ His First Loadout can be seen in Episode 3 - • EP. 03 Guess the Trade...
Hope it is useful & THANKS FOR WATCHING!
If you want to send me photos of your loadout, you can send them to jmorg19804@gmail.com. It is best if they are in Landscape Mode and numbered on order 01, 02, 03, etc... If you send pictures, make sure and include your KZfaq Handle as well.
The following are links to products shown in the video. Links marked (Affiliate Link) are Amazon Affiliate Links for Items in the video. I participate in the Amazon Associates Program and make a small commission if you purchase using this link at no cost to you. Thank you for your Support!
I also now have an Amazon Store where I am beginning to make lists of tools I use, favorites, etc. If you want to check it out you can see it here - www.amazon.com/shop/morgansma...
If you need help finding a tool, or If you would like a link for something else you see in the video... let me know and I will post it here as well.
#wiha #wera #plumbing #hvac #carpentry #maintenance #diy #homeowner #electrician #plumber #lowvoltage #trades #klein #vessel #fluke #ideal #dewalt #olight #vessel #wago #jdtco #wuben #stanley #M12 #Milwaukee #kleintools #inkerma #fluke #toughbuilt #packout #milwaukeepackout #knipex #wd40 #channellock
Time Stamps:
00:00 Intro & Last Episode Info
03:09 Loadout 1
07:51 Loadout 2
20:06 Final thoughts & Outro

Пікірлер: 63

@MattHmm-rq6dn 28 күн бұрын

Love what you can do with a ammo can Rob and I understand locking it as a requirement at least it's waterish proof.

@MattHmm-rq6dn 28 күн бұрын

Fyi the bits with the colored plastic on robs vessel electric screwdriver are insulated by vessel and annex get them on az jp. There's a gap to be electrical disconnected in the bit. I've used them they work great but defently not impact rated

@Stefan_Kawalec 27 күн бұрын

There's a nice ratcheting handle for that Ridgid tube cutter.

@Stefan_Kawalec 27 күн бұрын

Reloaded loadouts are good idea. It's always nice to see fellow tradesmen evolving.

@MORGANSMaintenance 27 күн бұрын

I think so too.... seeing what their thought process is from one idea to another

@wesleemiller 28 күн бұрын

I love this series👌

@MORGANSMaintenance 27 күн бұрын

@@wesleemiller 👍👍

@danbegin8532 28 күн бұрын

You are going to have to fix that PhD placard to; Joey Morgan, PsD "Pretty Sweaty Dude". 😂 All realness thanks for hanging in through the elements to make another quality video. Now go hydrate please!

@MORGANSMaintenance 27 күн бұрын

@@danbegin8532 yeah it’s not bad in my building if I open doors and run fans… I just can’t do that and film, it’s too noisy. I noticed the slow change in my shirt while editing 😂

@MattHmm-rq6dn Ай бұрын

One good thing about this is when people ask to see your loadout or you give them suggestions and they can't visualize it you can show then. I still think we can do an entire episode of all sbld loadouts I have one I can send like many of us. It's theme night!

@MORGANSMaintenance Ай бұрын

@@MattHmm-rq6dn it’s been nice for me on the tool reviews for the same reason. I just send people links when they ask me about something

@MattHmm-rq6dn Ай бұрын

I like it REALOD screams shotgun cocking noise in my head. "Brought to you by Duke nukem!"

@MORGANSMaintenance Ай бұрын

@@MattHmm-rq6dn 😂

@robholland5925 Ай бұрын

An other chance at 5 min of internet fame epic! 😂 I should be able to be in the live chat. I’ll set a alarm lol

@MORGANSMaintenance Ай бұрын

Most people don’t get two times in the Limelight 😂

@robholland5925 Ай бұрын

@@MORGANSMaintenancei know lol time to practice my autograph and get ready for all the people that will wanna take selfies with me. 😜

@MattHmm-rq6dn Ай бұрын

Loadouts change often even since mine is plus or minus a tool. I now replaced the mpx with mp2x so yea...

@Chromed121 28 күн бұрын

@@robholland5925hey rob I sent in my crescent tote into Morgan’s maintenance a while back , I really like the idea of the ammo box instead of my tote bag as I’m working in all conditions . Any cons to the ammo box ? Or any suggestions for setup?

@robholland5925 27 күн бұрын

@@Chromed121the biggest con would be that the tools are not neatly organised like in a tool bag. They kinda go into a compartment and you have to dig around for them. In fact about 4 days ago I gave up on the ammo box idea and now use the Milwaukee 4932464080 Packout 3 instead. The pro to that box is that it spreads the tools out wider and has a few organising trays to help separate things out. I do recommend that now. The ammo box I now use for my impact driver and combi drill with changer and drill and bit sets and that works well for me In short using a packout box for a hand tool option will never be neatly organised It’s more a old fashioned box to put tools in But if you have to transport your tools outside a lot then it will keep them dry For me the main point is security. I work in care facilities where I can’t trust the patients. And being able to lock away my tools from easy I’ll grab that and stab you hands is a must.

@MattHmm-rq6dn 28 күн бұрын

The vest is WELKINLAND Top-G Leather tool vest it's cheap but works not hot. I added thoes awp bags to fill the pass through pockets the stiff trap jaw features work great for that. That setup can run you around 100 dollars with additions. I have had the occidental leather and don't like it at all and it's heavier and hot. I've since moved onto diamondback 701 and love it but it's not cheap (get it on sale bare vest and use your own pouches). I do own badgers for framing when it calls for it but they are outdoor work bags as well.

@MORGANSMaintenance 28 күн бұрын

@@MattHmm-rq6dn 👍👍

@MattHmm-rq6dn 29 күн бұрын

Still jealous of that black packout trade you 😆. Seriously I've seen people candy or hammered spray paint the packout black before. There's a contractor in town who has all black packout and he paid over a thousand to import it. If milwaukee ever wanted to print money just offer the same packout in black in the usa.

@MORGANSMaintenance 29 күн бұрын

@@MattHmm-rq6dn I really like it too

@wesleemiller 28 күн бұрын

The ratcheting stuby screwdriver in loadout 1 looks like a Milwaukee

@MORGANSMaintenance 27 күн бұрын

@@wesleemiller that’s what I kinda thought too.. I wasn’t sure I had seen one before

@tannerwest6823 27 күн бұрын

@@MORGANSMaintenance⁠Milwaukee 8 in 1 ratcheting stubby. I carry one everyday now. My new favorite stubby screwdriver to keep in my pocket

@MORGANSMaintenance 27 күн бұрын

@@tannerwest6823 👍👍

@Stefan_Kawalec 27 күн бұрын

1. Sparky. 2. Matt, was in Episode 3 od the series, so I won't tell. You all need to check it yourselves :)

@MORGANSMaintenance 27 күн бұрын

👍👍

@three-phase562 27 күн бұрын

I don't mind ammo cans, although I do find them a bit bulky on occasions. I have all my adapter leads in one of mine. You can use Shadow Foam in them to increase the organisation, but then you loose tool space. Matt has a very busy loadout going on in that bag, nice quality tools though.

@MORGANSMaintenance 27 күн бұрын

@@three-phase562 I have one for my drywall stuff and one I leave empty just to transport stuff in bad conditions. Easier for me to hose it off than clean my bag or tools.

@MattHmm-rq6dn 27 күн бұрын

The one bag to rule them all!😆 Budy bag for a busy person. It's high praise from a professional like you 👍.

@three-phase562 27 күн бұрын

@@MattHmm-rq6dn The cost of working across a number of trades. At least in my roll I will know what I am going to so only need to equip for that particular job.

@OnusBones 28 күн бұрын

Very nice, as always. I'm tempted again to get a "real" Vessel USB, but I can't argue I need it, at all. My knockoff did well enough when I repaired an air-fryer; maybe a little fast, but no biggie. I really liked the idea of having some Sharkbite caps for emergencies.

@MORGANSMaintenance 28 күн бұрын

@@OnusBones my buddy has a knock off and uses it all the time. Sharkbites can save a big mess… especially a ball valve

@MattHmm-rq6dn 28 күн бұрын

I second the straight shutoff Valve it's hard to push a cap on running water. be safe use have protection 😆

@MattHmm-rq6dn 28 күн бұрын

The backpack worked out alot better for me though it's no longer a backpack or wearable over the shoulder at 46 lbs. Thoes Japanese levels are amazing and cheap they come in pink orange all kinds of great colors and are under 20 bucks. I've since switched to mp2x and like the extra tool space basically a complete quick grab pouch without the entire bag. Thoes v swap pannels are great and if you order the build out edition you choose the pannels and don't pay for something you won't use it was just under 400? That clip on the front us from ripnot amazing usa product add a super low profile clip anyplace. Every service person should carry a sharkbite cap and ball valve in a bag! I have used 4 this past 2 weeks alone due to old apartments brittle copper changing out faucets. You need the valve to put on pipes that are spewing out water to pass through then shut it off. The insulated instalation pliers are us 12/14g and are amazing to use. I wish they had the spring like thr European market gets and the lock closed. The bottom part of the orange pannel is removable too for bigger tools fyi. Any questions ask away I'll let you know what it us or how it works thanks.

@MattHmm-rq6dn 28 күн бұрын

The black scissors are Canary made in Japan carpet scissors they are very good and under 12 bucks ussaly. One thing you missed was on the plumbing tools is what's called a mandle. The silver bushing with the long screws in it. That locks on to shutoff valves or anything without a handle or one thats broken off. It's better than mangling it with cobras and it does minimal damage to threads. That has saved my bacon way too many times and it dosent have to be plumbing it can be gas as well.

@MattHmm-rq6dn 28 күн бұрын

The question on will European strippers work on us awg is kinda. The 1.5 if I looked it up right is closest to 16g which would be a European lighting circuit. The 12 g is equal to the 2.5 they use for sockets. I have had my hands on a European stripper before and you an strip the 14g solid ok if you don't bite down hard and control it. It's something the person that had the European strippers that let me try them showed me. The big advantage of the installation pliers euro edition is they are spring loaded like the forged wire strippers. When they come out with a spring loaded awg installation pliers I will defently vote with my wallet and pay the knipex tax.

@ElectroAtletico 28 күн бұрын

If I was Rob, I'd start a business of buying Milwaukee Packout gear in the UK (in black) and then selling it over here in the US for a nice 20% markup.

@MattHmm-rq6dn 28 күн бұрын

SOLD!

@robholland5925 28 күн бұрын

Shipping would be shocking

@MORGANSMaintenance 28 күн бұрын

@@ElectroAtletico Rob makes so much money he would do it out of the goodness of his heart 😂

@robholland5925 28 күн бұрын

I sometimes think having some USA packout mixed in could be fun. Like black bottom box red mid box and back boxes on top. Mix it up a bit would be fun i think

@MORGANSMaintenance 28 күн бұрын

@@robholland5925 yeah I like that idea too. It would also help you distinguish stuff if you had a bunch of it

@search_eternal 26 күн бұрын

That black Milwaukee packout does look cool. Does anyone know why Milwaukee does non-USA packouts in black?

@MORGANSMaintenance 26 күн бұрын

@@search_eternal I’ve never heard the reasoning behind it.

@MattHmm-rq6dn 26 күн бұрын

The original color was red but over in Europe there's a trade mark on that color hilti or some company like that. So there was a cease and deseast on milwaukee making storage cases there milwaukee red. That's why there black and I'm jealous!

@MattHmm-rq6dn 26 күн бұрын

Also my milwaukee rep told me they do red for packouts because they are lowering cost in thr usa by making one color of plastic. Since keeter Isreal dosent make packout it's easier to have one color.

@lockhammer3481 27 күн бұрын

As a professional sweater living in Florida I highly recommend sweat wicking shirts like Under Armor heat gear or Columbia . I just bought a Milwaukee heat tee but haven’t tried it yet. Cotton is not my friend!

@MORGANSMaintenance 27 күн бұрын

I normally wear a lot of Columbia Fishing Type Shirts. They are your best friend in the heat. I normally run fans and keep the doors open when i work in my building and its not too bad... I just can't film that way because its too noisy

@lockhammer3481 27 күн бұрын

I wear fishing shirts too Columbia and HUK , my wife likes them they don’t need an iron ! I have 4 fans running in my garage whenever I work out there. This Winter I am going to insulate the attic and install a mini split AC I can’t take the heat we have had the last two years.

@MattHmm-rq6dn 27 күн бұрын

The shirt I swear by maybe not for open flame is 32 degrees air mesh shirts. They are about as holey as you an get without being transparent. Best yet black dosent show sweat marks and they come in 3 packs for under 20 dollars. If I destroy them move on for 5 to 8 dollars a shirt. They are sold at my local cosco and kohls but you can order online at az. Fun fact you can screen print on them for company shirts!

@lockhammer3481 27 күн бұрын

@@MattHmm-rq6dn may go see if I can find some , just got a brand new Costco by my house, every time my wife’s goes to it I feel my net worth shrink.

@MattHmm-rq6dn 27 күн бұрын

At its worst here in Portland or we have them available from April to August. They come in 4 packs for 22 and sometimes as 15 or 12 dollars for 4 shirts! We put company names on them. They are as thin thousands thick basically thinner than you think it will be. They are medium strong there not lifetime shirts but for at times 3 dollars a shirt I don't care if they get painted or caulked. I'm a really warm person (shorts and airm mesh shirts in the snow and freezing temperatures. So when summer comes around I need something that dosent show any sweat stains. They only come in white and black at cosco but online other colors ate available. You will appreciate it in Florida for sure!