Ep. 6. Sequoia Extended Travel With Old Man Emu Rear Shock Install How To

Рет қаралды 87,426

Күн бұрын

kzfaq.info...
This video shows how to add about 3 additional inches of down travel over the Bilstein 5100 shocks on our 1st Gen Toyota Sequoia
All you need for this mod in one place: www.1stgenoffroad.com/episode...
Featured Upgrade:
1. OME 60020L Shock 26.5" Fully Extended: www.1stgenoffroad.com/store/p...
Previous Upgrades:
1. Bilstein 5100 Front Shocks: www.1stgenoffroad.com/store/p...
2. ARB Old Man Emu 2862 Rear Springs: www.1stgenoffroad.com/store/p...
3. Fuel Anza Wheels, Gun Metal, 17x8.5, -6 Offset: www.1stgenoffroad.com/store/p...
4. BFG KO2 285/70/17 Tires: www.tkqlhce.com/click-8817494-...
Tools Used:
1. 8mm-19mm Flexible Head Combination Ratcheting Wrench Set: amzn.to/2DmfDfK
2. Jack, Jack Stands:
amzn.to/2IuP0ta
3. WD-40 Silicone Lube: amzn.to/2LaA7tr
4. Wheel Chocks: amzn.to/2UNWez9
5. Makita Angle Grinder: amzn.to/2JjPx10
6. Metal Cutting Grinding Wheel: amzn.to/2xoTiNY
-----------------------------------------------------------------------------------------------------------
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!

Пікірлер: 193

@1stgenoffroad 5 жыл бұрын

Rear shocks can be found here: www.1stgenoffroad.com/store/p196/OME60020LRearShock.html

@danthefireman007 4 жыл бұрын

1stgenoffroad does ome make extended travel shocks for 1st gen tundras ?

@TJackSurvival 5 жыл бұрын

I've recently decided to get my wife a minivan and turn the family Sequoia into something I can be proud off road with. Thanks for making this channel. It gives me something to try.

@thelankyjim 5 жыл бұрын

That's a brave decision, I suggested a minivan to my wife and she made clear she'd only drive a minivan over my dead body.

@volcom137z 5 жыл бұрын

I have a 3rd gen 4runner but your video really helped me with the bushing install on my ome shocks. I used 2 washers hexbolt and nut and my impact driver.

@miketownsend8247 9 ай бұрын

Maxx suspension sway bar end links are nice

@miketownsend8247 9 ай бұрын

Thanks dude had a hard time finding 2" lift Rear shocks for a 2003 sequoia awesome

@miketaylor2156 4 жыл бұрын

This video help me very much as a few days ago I changed the shocks on at Toyota Land Cruiser Prado 1998 model right hand drive i’m watching your videos the running gear seems to be the same thank you👍🏻😀

@rodneykeech4743 2 жыл бұрын

Thats a great job explaining about these shocks ...

@texasmuscle6294 4 жыл бұрын

I want to see the driving video on this upgrade. Cool.

@kaibinrubber Жыл бұрын

Nice video! Subscribed.

@rocko3227 5 жыл бұрын

Nice information thanks!

@doogster2010 4 жыл бұрын

I have been researching the First Gen Sequoia and am close to buying one. I want to do some limited off roading and some hauling. I've watched some of your videos. Thanks for those. So, my questions: I want to get some lift but not a lot. Maybe 1.5 to 2.5 inches up on 4 corners. More interested in towing ability and a firmer ride. Would new shocks like the Bilstein 5100's in front do the trick? Will I need to upgrade the suspension too? In the rear, would air bags inserted into the coils do the trick? I don't necessarily want to mess with the anti-sway bars. Maybe newer, stouter coils for the rear would help too. I want the truck level at all times, maybe slightly higher in the rear when not loaded. I'd like to be able to tow maybe up to 5,000#. I get that you like a rear diff lock for 3 way locking but I am not sure I will need that as I don't plan to do tough off road stuff. Are 10 ply tires recommended for towing? thanks a lot and happy trails!!

@wildebeast393 3 жыл бұрын

What kind of travel would the billsteens have given if you cut the sway bar when they were on truck? Not an exact comparison.

@jaimetarnofsky4149 5 жыл бұрын

Go with the dobinsons they're amazing with the 3" springs

@tidoyun 5 жыл бұрын

This video series is the best thing I have found research wise for my sequoia. You’re the man! My question is did you cut both sway bar links? If u only cut one, why so?

@1stgenoffroad 5 жыл бұрын

You only need to cut one. I left the other one in place so it would be easier to go back if I didn’t like the way it handled.

@jreda2000 4 жыл бұрын

Can you add an auto-locking rear diff to gain that extra traction needed?

@TheDenver76 3 жыл бұрын

I just got a 3 inch lift to my 1st gen sequoia. I was curious if you feel the need to add longer bump stops in the rear to prevent the tires rubbing under compression in the rear? I am searching around for extended rear bump stops but I have not found anything.

@DS-ft5dt 3 жыл бұрын

Just order this for my 06 Tree! I'm excited for the end result, but not the install.

@57mikeryan 5 жыл бұрын

Josh Your videos are very informative, thank you. Question: how would you recommend I add down travel to 1st gen tundra (06). Front shocks are bilstein 5100 with bobinson spring Rear are stock. Thanks.

@PR_GTR 3 жыл бұрын

Hi from Puerto Rico 🇵🇷 😊 👍 Thanks!! Which one is softer for a smoother ride

@thelankyjim 5 жыл бұрын

Great video thanks! Looking 2012 Sequoia for my wife's daily driver the car we're buying seems solid for the time being but interesting to see what might be possible if I inherit it. I'm about to put an OME system on my Honda CRV, not expecting much offroad but keen for long legs for Colorado winter driving.

@1stgenoffroad 5 жыл бұрын

My favorite for 2nd gen Sequoia: www.1stgenoffroad.com/store/p609/DOBINSONS2.5LiftKitToyotaSequoia2008to2018.html#/

@dietsoap3539 5 жыл бұрын

little late to the game but just ordered the 2.5 OME lift kit and can't wait for it to come in.

@Hoihoi1331 4 жыл бұрын

How do you enjoy it so far, 10 months later?

@dietsoap3539 4 жыл бұрын

@@Hoihoi1331 I love it, the ride is silky smooth, no complaints on trails either.

@billharvey9959 5 жыл бұрын

I use the vise to put in the lower bushings

@Leojdm214 4 жыл бұрын

Curious to what tire size your using and wheel specs? Any wheel spacers?

@aaronpops4108 2 жыл бұрын

So you get over 2" extra travel in the rear with just shocks. That's pretty good.

@charlievang7843 5 жыл бұрын

Hey nice looking Sequoia! Do you have the 3.91 rear like the first gen tundra's also? if so, have you seen any mpg gains from the 33"? apparently they are suppose to be the best size tire for fuel efficiency in our 3.91 rears.

@1stgenoffroad 5 жыл бұрын

4.10. Does great with the 285/70/17s. Would definitely regear for 35s.

@00bradfo 4 жыл бұрын

Thanks for the video! I just bought a 03 sequoia that looks exactly like this with almost the same setup. With a 2 inch lift on the front should I buy longer sway bar links? I just changed one that broke and the angle of the sway bar has me a little worried. Thanks!

@1stgenoffroad 4 жыл бұрын

I think they do make longer sway bar links. Although I don’t know who. I ditch mine a long time ago and never looked back! 👍

@nyurtin777 5 жыл бұрын

Nice video! My air suspension on my 2006 Sequoia works intermittently and gets very bumpy at times. Hoping to solve the problem with just replacing shocks. I don’t want a super jacked up vehicle though. How much clearance is there with these shocks? If it’s crazy high, is there a different shock you could recommend to have it support all the weight but look fairly normal? Thanks!!

@1stgenoffroad 5 жыл бұрын

For stock height shock replacement, try these: www.1stgenoffroad.com/store/p221/Bilstein4600RearShock.html#/

@danieljantz913 5 жыл бұрын

I love you're videos. You have inspired me to make my 02 ac tundra more trail worthy. I've have always wanted a double cab 1st gen for awhile. My question is should I keep my ac or get a double cab. I'm worried i will be limited with want I can do offroad with a db because of the bad turning radius and longer wheel base. I travel on narrow rocky trails in colorado. The problem with the ac is the back seat is getting to small for my daughter but she rarely rides in the back, maybe twice a year when I take the family camping. What would you do?

@1stgenoffroad655 5 жыл бұрын

Hey bud, glad you like the videos. The dc is wider, taller, longer, heavier, and as you mentioned, has a terrible turning radius. I love my dc, but I live in Texas and use mine in mud and sand on the beach, wide open spaces. If I needed a trail rig for Colorado, I’d go with an AC. There’s still plenty of room in the back for your daughter and you’ll have a much more agile rig for all those rocks, low hanging branches and tight turns.

@bzlv1 Жыл бұрын

U should totally share a playlist of working on car tunes

@1stgenoffroad Жыл бұрын

I should! Maybe should even change the name to "Rock-N-Roll Off Road". 😄

@Dave-vi6ti 6 жыл бұрын

Also with read air ride what changes would we need to make or what would be the optimal build?

@1stgenoffroad 6 жыл бұрын

Here’s a link. www.1stgenoffroad.com/store/p64/OLD_MAN_EMU_COMPLETE_SUSPENSION_KIT.html

@1stgenoffroad 6 жыл бұрын

Remove the air pump and bags. You’ll need a “spring insulator seat”. Google that. And that kit in the link.

@BhorsleyAD33 Жыл бұрын

Hi Josh. Awesome videos. I decided to mod my old 2006 sequoia like you did. I want to add the ARB rear springs but already have new 5100s on there. I don't offroad so will I really need the downtravel? Or will the 5100s be fine for road use and occasional light off road?

@1stgenoffroad Жыл бұрын

5100s will be fine.

@701overland 6 жыл бұрын

thanks for sharing your vids about your sequoia and resources. I have recently purchased a 2001 sequoia with s 2" lift. I am noticing some play and a wobble at 70mph .. do you think it may be the ball joints?

@1stgenoffroad 5 жыл бұрын

Oh man. Could be tie rod ends, the hub, alignment, unbalanced tire. Lots of things. But the weak spot for these trucks are the lower ball joints. They're a couple hundred dollars and about an hour of time to change. If you don't know the history, I'd replace. And only replace with OEM.

@harmonize209 6 жыл бұрын

Nice, any different in ride quality between the 5100. Also hows your body roll after sway bar disconnect.

@1stgenoffroad 6 жыл бұрын

Yeah, that’s a great question and I meant to address it in the video but the quick video was already getting too long. The OME shocks are a little stiffer but not harsh. I thought the truck would corner like a drunk elephant after I removed the link. But honestly, I can’t really tell the difference. Probably the new shocks are a little stiffer. I’m happy with it for sure. As of now, I have no plans to replace the link I cut off.

@Hoihoi1331 4 жыл бұрын

@@1stgenoffroad As an update did you continue to enjoy it with no sway bar link?

@theninja001 3 жыл бұрын

Christopher Robin's Vlog Of Life I unbolted my rear sway bar, and I daily drive it, it doesnt effect handling enough to worry about it! The front seay bar has a much larger effect on sway

@nathankoroush7918 6 жыл бұрын

Your tree is looking like a beast.

@1stgenoffroad 6 жыл бұрын

Haha! Thanks man!

@skuirrely 6 ай бұрын

so what did you do about uptravel and extending the bump stop? Or does the shock now bottom out on itself?

@1stgenoffroad 6 ай бұрын

The shock compresses to about the same length as the OE shock, so the factory bumps are totally fine.

@mamatronic963 3 жыл бұрын

Nice, I wonder how much travel you would have got with the old shocks and no sway bar. Sway bar delete gives you more down travel om the margin than longer shocks (couple of inches)

@1stgenoffroad 3 жыл бұрын

Well, because the Bilstein was 3" shorter, 3 less inches.

@user-pj5wm6uq9g 6 жыл бұрын

Greetings from Russia, and thank you for an interesting blog! Question: how did the rear stabilizer affect the roadability?

@1stgenoffroad 6 жыл бұрын

Howdy from Texas! Glad you like the video series. Like and subscribe. I have several more on the way. When I cut off the sway bar link, I was initially concerned that it would corner like a drunk elephant and I was trying to decide if I wanted to replace it with a quick disconnect or not. But after driving it, I have to say that I can’t tell a difference. It handles just fine. I haven’t noticed any increased body roll. And at this point I have no plans to replace it. In just going to go with one rear sway bar link.

@ryanhensley146 4 жыл бұрын

what kind of front and rear shocks could i use on an '05 sequoia limited with rear air bags?

@1stgenoffroad 4 жыл бұрын

Factory height? I would go with these: www.1stgenoffroad.com/store/p220/Bilstein4600ShocksSequoia.html#/

@anhdough 5 жыл бұрын

Do i have to install the whole lift kit or can i just insall the shocks with oem toyota springs?

@1stgenoffroad 5 жыл бұрын

Sure. The shocks will work in a non lifted sequoia. But if you’re not lifting, I might consider Bilstein 4600 rear shocks here: www.1stgenoffroad.com/store/p221/Bilstein4600RearShock.html#/

@rossweaver2128 Жыл бұрын

Got a question I put a 2.5 inch lift on my 05. The entire front end except upper control arms have been replaced including steering rack. The vehicle is very darty on the road you have to stay constantly locked in on steering. Would you guys think it need adjustable uppers for more caster. I know someone has ran into this the front end is completely new (except upper) and drives like crap fully in spec alignment wise.

@1stgenoffroad Жыл бұрын

We will always recommend aftermarket upper control arms for any lift over 2". I like SPC UCAs for their adjustability. When the steering is twitchy, it is likely a caster problem. Caster changes when you lift a vehicle and the higher you lift it the more caster change you get. Google search the effects that caster has on oversteering. SPC upper control arms will correct the caster and get it back where you need it to be. Link for SPC UCAs: www.1stgenoffroad.com/store/p146/SPCUCAs/Tundra/Sequoia.html

@carpenter751 3 жыл бұрын

I was wondering if you have a full size spare and do you keep that underneath?

@1stgenoffroad 3 жыл бұрын

Yes. Will barely fit.

@14paste14 3 жыл бұрын

You living life on the edge with the blocks on the jack

@sandovalpaul 4 жыл бұрын

Hey josh what if my 2006 sequoia has the air ride suspension Could I install the old man Emu on the fronts and rears?...thank you

@1stgenoffroad 4 жыл бұрын

Hey Paul, the front will work the same as mine. And the rear will work too but you’ll need to do a couple more things. Basically pull the old shocks, air bags and pump. Pull the fuses that service the pump and height sensor (so you don’t throw a code/dash light). Install the new longer spring and spring. But you’ll need a spring seat insulator to accommodate the new spring. I don’t sell those on the website, but I link to them on the “favorites” page in the website. www.1stgenoffroad.com/our-favorites.html#/

@TyAki801 Жыл бұрын

When replacing just those rear struts is an alignment required?

@1stgenoffroad Жыл бұрын

Doesn't change the ride height, so alignment is not required.

@miketownsend8247 9 ай бұрын

Went with elka shocks but they sent me 08s instead of 03s

@1991pjc 6 жыл бұрын

Hey man, Thank you very much for doing sequoia videos. We are using our sequoia for overlanding mission trips and would like to know if the BP-51 arb system would be possible to put on the 2007 sequoia or if you know anyone that has suspension systems that are adjustable for a sequoia with 3-4 inch lift? Best, Giovanni

@1stgenoffroad 6 жыл бұрын

Hey buddy, the BP 51 system will fit the 08 and newer sequoia in the front. If you’re interested in a bypass coilover for the 1st gen Sequoia, than I would consider fox or Icon.

@1991pjc 6 жыл бұрын

Thank you for the references. I have come across many suspension systems where they are not sequoia specific but the first generation tundra and sequoia are the same frame, correct? So with your experience, have you found any suspension system for a first generation tundra not work on a 1st generation sequoia?

@1stgenoffroad 6 жыл бұрын

The front ends at exactly the same. Anything that will work on a tundra Tony end will work on a sequoia front end. The rear is totally different. The sequoia has coils and shocks and the tundra has leaf springs and a different set of shocks. The rear end of a sequoia is more comparable to an 80 series land cruiser.

@karirolan8 Жыл бұрын

Can I use the stock shock if I replace the spring with the Land Cruiser spring?

@1stgenoffroad Жыл бұрын

This shock will work well this that spring application. Thanks!

@harmonize209 5 жыл бұрын

Hi are these OME 60020L same as 60071L. I don't see any OME 60020L on your website. Gonna order some to replace my 5100.

@1stgenoffroad 5 жыл бұрын

Turns out the 60020l shocks are a geographical oddity. 2 months away from everywhere. The 60071l shocks are stiffer but we’ll suited for our heavy trucks. And they ship next day.

@1stgenoffroad 5 жыл бұрын

Got it straightened out now, 60020L shocks are readily available again!

@golfmike304 6 жыл бұрын

Nice. Would have liked seeing how it handled the same obstacle with the new OME shock. But it looks like a great project.

@1stgenoffroad 5 жыл бұрын

Yeah, that little hill it about 4 hours away, If I get out there again, I'll give it a go.

@jeimmyhernandez962 6 жыл бұрын

Were can I get your lift kit and how much it cost?

@1stgenoffroad 6 жыл бұрын

Here you go buddy. www.1stgenoffroad.com/store/p64/OLD_MAN_EMU_COMPLETE_SUSPENSION_KIT.html

@imprezive3rdGen 2 жыл бұрын

Anyway you can please help me source the shock eye bushing 🙏🏽

@abibodlogistics 5 жыл бұрын

I have some technical questions about the first generation Toyota Sequoias,first question is that is it possible to change the tailgate of a Sequoia that did not come with a spoiler originally with the one that has a spoiler,can a spoiler be added to a tailgate that does not come originally with one,is it possible to change the tail lights of an 02 model with say an 05-07 models.I will really appreciate your response because I am trying to update my 2002 model.

@1stgenoffroad 5 жыл бұрын

You know, I'm not sure about the spoiler. I believe I have seen guys do this but I am not certain. If I find anything out I'll let you know. I don't think I've seen a taillight swap. I could be wrong, but I believe they are sized differently.

@abibodlogistics 5 жыл бұрын

@@1stgenoffroad Thanks for taking time to attend to my concern, I am a first time user of a Sequoia and will really appreciate all you can do to help me enjoy being a Sequoia owner.

@btac6481 2 жыл бұрын

do you have any videos on the rear suspension. more specifically bushings and replacement of said bushings

@btac6481 2 жыл бұрын

weird idk how im on this videos thread, i must look like a big dumme, lol.

@1stgenoffroad 2 жыл бұрын

@@btac6481 Try this: kzfaq.info/get/bejne/jtaHpbeC0dzVXZc.html

@jeremyschudde6015 4 жыл бұрын

Did your sequoia have airbags originally? And if not will this kit still replace the airbags??

@1stgenoffroad 4 жыл бұрын

It always had coils. If you’re looking to go from airbags to traditional springs, you need to remove the pump and airbags. Remove the fuses that service the pump and sensors. Add a new rear spring insulator. And then install whatever spring/shock combo you want. The insulator can be found here: www.1stgenoffroad.com/our-favorites.html

@trdjody 4 жыл бұрын

I have extended brackets i made for the brake line. since nobody supports us sequoia owners. its more of a giant loop during wheel travel 😂

@fernandobriseno8164 Жыл бұрын

I thought you were supposed to torque the bolts at the bushings once the tires were on and back on the ground?

@1stgenoffroad Жыл бұрын

That is true for bushings with rotational movement. The lower shock mounts needed to be retorqued once is was all done.

@senderoverland 3 жыл бұрын

How much of a lift do you get with this combination?

@1stgenoffroad 3 жыл бұрын

About 2".

@josemunoz6945 4 ай бұрын

Did you ever reinstall the rear sway link that you removed??

@1stgenoffroad 4 ай бұрын

Nope. Left it off. Lots of flex and no difference in handling.

@Geogodoy 6 жыл бұрын

Would extended links for rear and front help with down travel??

@1stgenoffroad 6 жыл бұрын

You need to go up AND down. So extended links would help with down travel but make full compression worse. Besides, I really haven’t missed the links. Maybe if I did heaving towing. But even now I can haul my goat hauler. About 2000lbs, with no problem.

@12scars 5 жыл бұрын

Extending the links keeps the sway control rate the same, it does nothing for wheel travel. The two sides of the axle are still tied together.

@davidrios1723 3 жыл бұрын

Do you need to cut the sway bar?

@1stgenoffroad 3 жыл бұрын

If you want to get full flex, you have to remove one of the sway bar links.

@vr4junkie385 3 жыл бұрын

Do these shock absorbers work for the front

@1stgenoffroad 3 жыл бұрын

Yes. We have OME front shocks and springs here: www.1stgenoffroad.com/store/p615/ARB2.25inchFrontLiftKitSequoia.html

@kanibis420 5 жыл бұрын

can you get the OME kit for 1st Gen Tundra ?

@1stgenoffroad 5 жыл бұрын

OME doesn’t make a AAL for the rear anymore. This is about as close as you can get: www.1stgenoffroad.com/store/p177/Tundra3/1Lift.html#/

@ahmedalshwehdy2329 4 жыл бұрын

hello Josh why you not just press the diff lock button?? or what's the function of the diff lock button??

@1stgenoffroad 4 жыл бұрын

/the diff locks is a center diff lock. It splits power between front and back, not left and right. So if you have front and rear lockers, you can be triple locked.

@HereFourYou 4 жыл бұрын

What size rim and tire are you riding with this lift?

@1stgenoffroad744 4 жыл бұрын

17x8.5”, -6 offset. Tires are BFG KO2 286/70/17.

@HereFourYou 4 жыл бұрын

Josh Embry I was looking into lifts and found your page and am inspired ... I was ordering some 16 inch rims because that’s what fits currently with stock shocks.. with the 16’s would you suggest a certain size of lift or should I go bigger on the rims if I wanna lift it?

@cesaralexisvalenciamontano7861 Жыл бұрын

What are the wheels that you had on the sequoia at this time?

@1stgenoffroad Жыл бұрын

Fuel Anzas: www.1stgenoffroad.com/store/p37/FUEL__Anza_17x8.5_-_Gun_Metal_Matte.html

@cesaralexisvalenciamontano7861 Жыл бұрын

@@1stgenoffroad thanks boss!

@TheElitefighter1 4 жыл бұрын

What the size on the wheels and tires I’m thinking of getting bigger ones on my Sequoia

@1stgenoffroad 4 жыл бұрын

These are 285/17/17

@michaelhiguera1254 2 жыл бұрын

@@1stgenoffroad ???

@kravscc5491 3 жыл бұрын

Did you disconnect the front sway bar as well?

@1stgenoffroad 3 жыл бұрын

Yeah, I'm not running sway bars, front or rear.

@curtishutslar9206 2 жыл бұрын

@@1stgenoffroad did you just disconnect one side of each sway bar? Or did you remove them completely? If you only disconnect one side is one side better than the other?

@1stgenoffroad 2 жыл бұрын

@@curtishutslar9206 All you need to do is disconnect one sway bar link to disengage the entire sway bar system. It doesn't matter which side you remove.

@christianguajardo6448 5 жыл бұрын

Can u send me the products you remove from ur sequoia?! Lol I have a first gen tundra love ur videos and website! Trying to build on a TIGHT budget. Keep it up learned a lot from your videos bud

@1stgenoffroad 5 жыл бұрын

Hey bud, those shocks are long gone.

@pauly3d728 4 жыл бұрын

What's the pros and cons of Sequoia vs 4runner

@poweredbyrice5708 4 жыл бұрын

Land Cruiser wins

@moetic6601 6 жыл бұрын

I have an 07 sequioa I need to do the rest struts but was trying to figure out how do you reach the top nut? Do i need to crawl under once i have the truck in the air? Thanks

@1stgenoffroad 6 жыл бұрын

Take a look at my video here: kzfaq.info/get/bejne/jtaHpbeC0dzVXZc.html

@moetic6601 6 жыл бұрын

Thank you

@moetic6601 6 жыл бұрын

Would it be easy to take the wheels.off to get to the top nut? I know it isn't visable to see

@1stgenoffroad 6 жыл бұрын

I took the wheels off.

@TheDaoOfRescue 6 жыл бұрын

Looking for the max comfort ride out of one of these bad boys, any ideas? Just leave it stock ?

@1stgenoffroad 6 жыл бұрын

Max comfort? Don't lift it.

@TheDaoOfRescue 6 жыл бұрын

just solid tires then are the only thing to change... Tires I have are brand new so it may be a min... lol

@TheBillyBlack 2 жыл бұрын

Why not cut down those bolts instead of the washer stack? The manual lists those as a non-reusable parts. I picked up 5 bolt/washers for $20 at the dealer. Thanks for the video, I’m not crying foul, just trying to add to the knowledge.

@1stgenoffroad 2 жыл бұрын

What if you want to go back?

@TheBillyBlack 2 жыл бұрын

Part# 90119A0018

@TC-fj2bk 2 жыл бұрын

I've never torqued a bushing fully unloaded while the suspension was at max travel, most of them rip apart. God choice with, "The Gorillas".

@elevatingmindss 4 жыл бұрын

what kind of shocks you runnig on the frong?

@1stgenoffroad 4 жыл бұрын

Icons

@elevatingmindss 4 жыл бұрын

@@1stgenoffroad thanks

@1stgenoffroad 4 жыл бұрын

@@elevatingmindss Here's the Vid for that one: watch

@everythingpnw 4 жыл бұрын

Can all these mods be done to a 2005 toyota tundra?

@1stgenoffroad 4 жыл бұрын

Front is the same. Rear is totally different.

@everythingpnw 4 жыл бұрын

1stgenoffroad Is your other truck a 05-06 tundra?

@docfischer7291 6 жыл бұрын

So you are showing a new Do binson shock. What springs do you go with? How far can you go without losing that driveshaft ?

@marcelloasuncion4257 Жыл бұрын

I’m in the parking lot now in oroville at Walmart

@1stgenoffroad Жыл бұрын

...That's cool.

@austinkerr5092 2 жыл бұрын

Howdy from Ohio , What size tires are you running with this setup ?

@1stgenoffroad 2 жыл бұрын

Howdy, 285/70/17 on a 17"x8.5" wheel with a -6 offset.

@austinkerr5092 2 жыл бұрын

@@1stgenoffroad awesome thanks !

@Kosgey69 6 жыл бұрын

Any future plans for a locking rear differential?

@1stgenoffroad 6 жыл бұрын

Yes. Hopefully before the end of the summer. That will be a video too.

@MRTano512 6 жыл бұрын

Is the locker going to affect the ATRAC? In your video the rear wheel spins when you loose drop on the shock, shouldn't the ATRAC have corrected that and applied the brake to rear wheel and direct power to the non-spinning rear wheel? Or was that for demo purposes? Also, did you change the springs in the rear as well?

@1stgenoffroad 6 жыл бұрын

Hey buddy. I have a 04. ATRAC didn’t happen until 05. Good point though. I could have applied the brake and gas and that would have shifted some power from one wheel to the other. I didn’t do that. The locker will probably be a Harrop E locker.

@harmonize209 6 жыл бұрын

1stgenoffroad not to be a ass but im pretty sure all sequoia has atrac. I have a 02 limited that has atrac as you can see in my video. Just stick in 4L and low gear and injoy. Dont let off gas pedal when tire spin and let the atrac do its job. Now go out there and try it.

@1stgenoffroad 6 жыл бұрын

No. 01-04 had conventional t- case and standard traction control. One of the reasons 05'-07' is more sought after.

@beterz 6 жыл бұрын

With your Sequoia do you hear strong plastic sound in your car every time you hit a bump? Like a bunch of rattles and whatnot

@1stgenoffroad 6 жыл бұрын

Nope

@beterz 6 жыл бұрын

1stgenoffroad you think it could be bad struts in the rear for it rattle like that?

@1stgenoffroad 6 жыл бұрын

Yeah, that’s a definite possibility. Is it air suspension or traditional coils and shocks?

@beterz 6 жыл бұрын

1stgenoffroad it's air suspension

@1stgenoffroad 6 жыл бұрын

Yeah. I wonder if the pumps out or the air bags are done.

@roborantes1289 6 жыл бұрын

i Have a Tundra 2004 Limited I Love my Truck and you Show me A Diferent WAy To Lift MY toy Thanks I learn From The Experts

@1stgenoffroad 6 жыл бұрын

haha. Awesome. Thanks!

@christianwolf68 2 жыл бұрын

or just go with a front dif lock

@1stgenoffroad 2 жыл бұрын

why not a rear locker?

@ocautopartners120 6 жыл бұрын

Will this rear shock and spring set work on a 2003 2WD Sequoia? Also, did you end up changing front shocks and springs to the OME setup as well?

@1stgenoffroad 6 жыл бұрын

Would work perfectly. Recently changed my 5100s in the front to Icon coilovers.

@Dave-vi6ti 6 жыл бұрын

I would like to see this build taken offroad

@1stgenoffroad 6 жыл бұрын

Yeah, I need to find a good cameraman for that.

@Dave-vi6ti 6 жыл бұрын

1stgenoffroad maybe gopro with fender mounts?

@1stgenoffroad 6 жыл бұрын

good idea.

@_rzmp420 3 жыл бұрын

Could you go higher

@1stgenoffroad 3 жыл бұрын

Sure. Lots of options here: www.1stgenoffroad.com/store/c17/2001-2007ToyotaSequoiaSuspension

@smokeyyang7600 6 жыл бұрын

Why it took so long for you to come back

@shawn1928 3 жыл бұрын

1:15 of course it doesn't help when stupid Toyota leaves out locking rear diff for the Sequoia (and the Tundra!). Blows my f-ing mind

@1stgenoffroad 3 жыл бұрын

At least some Tundras got a rear limited slip.

@shawn1928 3 жыл бұрын

@@1stgenoffroad Yeah at least some American Tundras have auto LSD. Canadian Tundra....how about none of the above. Just f-ing stupid I don't get it

@elijahbrooks8589 6 жыл бұрын

1st

@1stgenoffroad 6 жыл бұрын

lol. Yes you are.

@patriotsleepercell4060 8 ай бұрын

just installed the lift springs and fox shocks that i ordered from you. My shock nut was rusted out it was the biggest nightmare to take them off there is no fking space there.

@1stgenoffroad 6 ай бұрын

Sawzall